Novel Ex-vivo Calf Brain Model with Integrated Sub-Skull Force Sensors to Access Simulated Neurosurgical Procedures

Hamad Binhammad; Matheus Ballestero; Mohammed Babgi; Seana Shaka; Nima Hemati; Rothaina Saeedi; Aiden Mazidi; Bianca Giglio; Rukun Dou; Houssem-Eddine Gueziri; Amir Hooshiar; Rolando F. Del Maestro

arXiv · 2609.14198

Novel Ex-vivo Calf Brain Model with Integrated Sub-Skull Force Sensors to Access Simulated Neurosurgical Procedures

Hamad Binhammad·Matheus Ballestero·Mohammed Babgi·Seana Shaka·Nima Hemati·Rothaina Saeedi·Aiden Mazidi·Bianca Giglio·Rukun Dou·Houssem-Eddine Gueziri·Amir Hooshiar·Rolando F. Del Maestro

View original source ↗Read source document ↗Export metadata ↓

Abstract

Surgical tissue manipulation demands precision; however, tool-tissue manipulation force magnitudes under realistic conditions are rarely quantified. To address this gap, we proposed and validated a portable ex-vivo force-sensing platform that measures tool-tissue interaction forces across the skull-brain interface during simulated neurosurgery. The system involves fresh calf brain tissue, used as a biological surrogate for brain parenchyma, placed in a 3D-printed human skull model equipped with a 6 degree-of-freedom force/torque sensor and a real-time data acquisition system. Five validation protocols assessed the accuracy and dynamic fidelity of the platform against ground-truth measurement, static accuracy and linearity using calibrated weights (0.5-50 g), minimum detectable force, spatial consistency across different anatomical regions, effect of surgical draping, and long-duration stability. Across protocols, measured forces showed excellent agreement with reference loads (correlation R = 0.9997), with RMSE < 0.005 N and mean relative error under 2%. The platform reliably detected low-magnitude forces down to 1 g (9.8 mN), while surgical drapes introduced no meaningful signal distortion and prolonged recordings exhibited minimal drift. Overall, the proposed framework provides objective, high-fidelity force quantification for skill training and performance assessment using fresh calf brain tissue and may serve as a foundation for force-based evaluation across other surgical procedures. Future work will integrate clinically used surgical instruments to increase procedural realism and will progress toward clinical trials to evaluate usability, educational impact, and translational relevance in practice-adjacent settings.

Explore related subjects

cs.RO cs.SY eess.SY

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Hamad Binhammad, Matheus Ballestero, Mohammed Babgi, Seana Shaka, Nima Hemati, Rothaina Saeedi, Aiden Mazidi, Bianca Giglio, Rukun Dou, Houssem-Eddine Gueziri, Amir Hooshiar, Rolando F. Del Maestro. 2026-09-13. Novel Ex-vivo Calf Brain Model with Integrated Sub-Skull Force Sensors to Access Simulated Neurosurgical Procedures. https://arxiv.org/abs/2609.14198

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Highly-Efficient Differentiable Simulation for Robotics

Robotics simulators have improved significantly in computational speed and scalability, enabling them to generate years of simulated data for complex systems in minutes or hours. Despite these advances, efficiently and accurately computing simulation derivatives remains an open challenge. Addressing this would accelerate the convergence of reinforcement learning and trajectory optimization algorithms, particularly for contact-rich problems. This paper introduces a unifying framework for robotic simulation that accounts for all factors, including dynamics, collisions, and friction. The resulting algorithm computes analytical derivatives of the simulation by implicit differentiation, explicitly handling the intrinsic non-smoothness of the collision and frictional stages while exploiting the sparsity induced by the multi-body structure. Benchmark results demonstrate state-of-the-art performance, with timings ranging from $5\,μ$s for a 7-dof manipulator to $95\,μ$s for a 36-dof humanoid, an improvement of at least two orders of magnitude over alternative methods. Implemented in C++, the code will be open-sourced after the review process to support applications such as simulation-driven learning and real-time control.

cs.RO↗

arXiv2026

GeCCo -- a Generalist Contact-Conditioned Policy for Loco-Manipulation Skills on Legged Robots

Most modern approaches to quadruped locomotion focus on using Deep Reinforcement Learning (DRL) to learn policies from scratch, in an end-to-end manner. Such methods often fail to scale, as every new problem or application requires time-consuming and iterative reward definition and tuning. We present Generalist Contact-Conditioned Policy (GeCCo) --- a low-level policy trained with Deep Reinforcement Learning that is capable of tracking arbitrary contact points with a quadruped robot. We shift from task-specific end-to-end learning to a modular hierarchy in which a single planner-agnostic, contact-conditioned tracking policy serves as a robust interface between planning and control. By maintaining stable contact execution under dynamic uncertainty and planner mismatch, the policy enables high-level planners (e.g., handcrafted, learned, or optimization-based) to be composed and swapped without retraining. We demonstrate the scalability and robustness of our method by evaluating on a wide range of locomotion and manipulation tasks in a common framework and under a single generalist policy. These include a variety of gaits, traversing complex terrains (e.g., stairs and slopes) as well as previously unseen stepping-stones and narrow beams, and interacting with objects (e.g., pressing a button, pushing a barrel). Our framework acquires new behaviors more efficiently, simply by combining a task-specific high-level contact planner and the pre-trained generalist policy. Project website: https://vassil-atn.github.io/gecco.github.io

cs.RO↗

arXiv2026

ERUPT: An Open Toolkit for Interfacing with Robot Motion Planners in Extended Reality

We present the Extended Reality Universal Planning Toolkit (ERUPT), an extended reality (XR) system for interactive motion planning. This paper serves to introduce our open-source system to others who can use it as a base to develop immersive robot interaction applications. Our system allows users to create and dynamically reconfigure environments while they plan robot paths. ERUPT uses XR to provide a broad range of natural interaction capabilities, allowing users to grab and adjust objects in the environment similar to interaction in the real world, rather than using a mouse and keyboard with the scene projected onto a 2D computer screen. Our system integrates with MoveIt, a manipulation planning framework, allowing users to send motion planning requests and visualize the resulting robot paths in virtual or augmented reality. We provide a broad range of interaction modalities, allowing users to modify objects in the environment and interact with a virtual robot. Our system allows operators to visualize robot motions, ensuring desired behavior as it moves throughout the environment, without risk of collisions within a virtual space, and to then deploy planned paths on physical robots in the real world. Code can be found at https://github.com/parasollab/erupt.

cs.RO↗