Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2609.19349

Vertical Attenuation of Thermoremanent Magnetic Anomalies: Implications for Drone-Borne Archaeological and Shallow Geophysical Surveys

Alexandru Hegyi·Kristoffer Aalstad·Arne Anderson Stamnes·Luc Girod·Sebastian Westermann·Diaa Sheishah·Enas Abdelsamei·Michał Pisz·Norbert Pirk
View original source ↗Read source document ↗Export metadata ↓

Abstract

Magnetic surveys are widely used in archaeology to reveal buried features by detecting variations in the Earth's magnetic field caused by past human activities. However, as sensor height increases, magnetic anomalies produced by subsurface sources weaken and broaden, posing challenges for both ground-based and aerial (UAV) surveys. This study quantifies that altitude-dependent loss of signal and spatial definition using a fully synthetic model of a uniformly magnetized circular kiln together with upward continuation of measured fluxgate data from the Storbekken 1 iron-production site in central Norway. The synthetic experiment shows that a 2 m diameter, 1 m thick magnetized cylinder buried 0.3 m below ground retains only about 11% of its near-surface (0.2 m) peak amplitude at 2 m sensor height and about 3% at 4 m. In the hybrid experiment, composite furnace anomalies of several hundred nanoteslas collapse to tens of nanoteslas by 2 to 3 m, while distinct lobes merge into broad, low-contrast features. The results show that UAV-borne magnetometry can remain effective for site detection and delineation at elevations where detailed intra-site morphology is already strongly degraded. For small or subtle archaeological targets, sub-metre to low-metre sensor heights provide substantially greater interpretative detail. Recent field evidence on UAV-system noise further indicates that practical detectability will depend not only on source-distance attenuation but also on platform configuration and acquisition strategy. The resulting attenuation curves and morphological observations provide transferable guidance for planning archaeological and shallow-geophysical UAV magnetic surveys.

Explore related subjects

physics.geo-ph

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Alexandru Hegyi, Kristoffer Aalstad, Arne Anderson Stamnes, Luc Girod, Sebastian Westermann, Diaa Sheishah, Enas Abdelsamei, Michał Pisz, Norbert Pirk. 2026-09-16. Vertical Attenuation of Thermoremanent Magnetic Anomalies: Implications for Drone-Borne Archaeological and Shallow Geophysical Surveys. https://arxiv.org/abs/2609.19349

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Direction-Aware Masked Pretraining for 3D Seismic Representation Learning and Transfer to Cross-Area Acoustic Impedance Inversion

Large archives of unlabeled three-dimensional seismic data offer opportunities for self-supervised representation learning and subsequent transfer to acoustic impedance inversion. However, conventional masked pretraining often treats three axes equivalently, overlooking differences between lateral reflector structure and vertical waveform characteristics. We propose a direction-aware masked autoencoder for three-dimensional post-stack seismic data, combining anisotropic tokenization, direction-aware representation, trace-aligned tube masking, and reconstruction constraints designed for reflector continuity and waveform characteristics. We evaluate reconstruction quality and downstream transferability using field data through masked reconstruction and cross-area acoustic impedance inversion. Reconstruction is more sensitive to lateral token resolution than to moderate changes in vertical patch length. Within the evaluated configurations, increasing encoder capacity does not fully compensate for reconstruction fidelity loss associated with coarser tokenization. Preferred token scales and masking strategies differ between reconstruction and inversion, indicating that reconstruction fidelity alone is not a reliable indicator of transferability. For cross-area inversion, the pretrained model is fine-tuned in the source area and applied to the target area without further parameter updates. With limited target-area well control, the proposed framework reduces normalized root-mean-square error by 20.8% relative to a pretrained conventional masked autoencoder across eight target-area test wells under matched tokenization and downstream settings. These results demonstrate the value of direction-aware masked pretraining for field seismic inversion and show that token scale and masking strategy should be selected according to downstream-task requirements rather than reconstruction accuracy alone.

physics.geo-ph↗
arXiv2026

Predicting the Elastic Properties of a Cemented Granular Material during Chemical Damage (Debonding)

While underground reservoirs emerge as essential elements to face global warming, these systems represent complex multi-physical and multiscale problems. The considered injection of fluids during hydrogen storage, carbon dioxide sequestration, or geothermal energy recovery involves a modification of the chemical equilibrium of the fluid in the porous reservoir. Chemical reactions can induce microstructural changes of the rock matrix, leading to a reduction of elastic properties of the material, and to potential settlement or stress redistribution. Consequently, it becomes pivotal to establish predictive behavior laws to describe the effect of chemical damage on elastic properties. Facing the difficulties to estimate experimentally the impact of chemical damage on mechanical properties, a Digital Rock Physics approach is proposed in this contribution. This numerical homogenization scheme is used to compare two distinct types of microstructure models: the first one consists in a Discrete Element Model, while the second one employs a continuous description. This continuous formulation is based on a Phase-Field description to predict the evolution of the microstructure subjected to chemical alterations and on the Fast Fourier Transform to estimate the macroscopic properties of the material. Finally, these frameworks establish different softening laws that can be used as constitutive ingredients for a cemented material during its weathering.

physics.geo-ph↗
arXiv2026

Determination of Physical Height Differences from Time Transfer via the ACES Mission -- A Simulation Study

The determination of physical height differences using highly stable atomic clocks has emerged as a novel approach in relativistic geodesy, exploiting the gravitational redshift as a direct observable of geopotential differences. In this study, we investigate the feasibility of satellite-based clock comparisons using the Atomic Clock Ensemble in Space (ACES) onboard the International Space Station, which enables time transfer via microwave (MWL) and optical (ELT) links. Since operational optical data are not yet available, a comprehensive full-scale simulation of realistic ACES observation scenarios is performed, including detailed noise models of clocks and links. A slope-based estimation method is applied to time series of clock comparisons in order to extract the relativistic redshift signal and derive height differences between the ground stations. The performance of the approach is evaluated for quasi-common view, non-common view, and split non-common view configurations, where the latter divides the observation period into shorter intervals. The results show that optical links enable faster convergence and can achieve height accuracies at the decimeter level within a few days and at the centimeter level over longer periods, while microwave links are more strongly affected by noise and bias contributions. Non-common view processing significantly increases observation availability with only minor loss in accuracy, and the split approach provides robust solutions for larger networks. These findings demonstrate the strong potential of satellite-based clock comparisons as a remote-sensing technique for determining physical height differences on a continental scale.

physics.geo-ph↗