Search arXivSearch

arXiv · 2609.25061

Cross-Detector Transfer Learning with Parnassus: From ALEPH to SLD

Abstract

Parnassus is a fast detector-simulation and reconstruction framework that maps truth-level particles directly to reconstructed particles. In this work, we investigate cross-detector transfer learning by adapting a Parnassus model for the ALEPH detector to the SLD detector. ALEPH and SLD have similar detector responses, as they were both targeting hadronic $Z$-pole $e^+e^-$ events, while differing substantially in the underlying detector technology, reconstruction, and archived data representation. We initialize the SLD particle model with weights learned on ALEPH, fine-tune it on SLD, and compare it with the same architecture trained directly on SLD. The ALEPH-initialized model gives substantially improved particle- and jet-level agreement with the SLD reference, including a factor of 5.2 improvement in the charged-particle angular response and an improvement in the jet angular resolution from $1.73$ to $1.15$ times the SLD reference. The results show that detector-response information learned on ALEPH can be reused when modeling SLD and motivate reusable pretrained Parnassus models for legacy $e^+e^-$ detectors, which is especially critical for experiments without access to the original software pipeline. With this paper, we also release an AI-ready version of simulated SLD $e^+e^-$ events.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Ya-Feng Lo, Chi Lung Cheng, Benjamin Nachman. 2026-09-13. Cross-Detector Transfer Learning with Parnassus: From ALEPH to SLD. https://arxiv.org/abs/2609.25061

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

The Remote Analog to Digital Conversion DAQ System for the TRISTAN Detector Upgrade

The TRISTAN detector is an upgrade to the KATRIN experiment to enable a differential measurement of the tritium $β$-decay spectrum to search for sterile neutrinos with keV masses. This entails performing precision electron spectroscopy with over one thousand silicon drift detector pixels, each responsible for recording incident electron rates of $10^5$ counts per second. A project specific data acquisition (DAQ) system is developed to meet the experimental challenges through a remote analog to digital conversion (RADC) design. In this work, the conceptual design of the RADC DAQ is presented along with the built system for operating the TRISTAN detector upgrade. The system includes flexible signal processing logic and data management that is optimized for the high-rate precision measurement.

physics.ins-det

True Alternating Current Scanning Tunneling Microscope (ACSTM): tunneling on insulators

Scanning Tunneling Microscopy (STM) has revolutionized our atomic scale understanding of surfaces and accelerated progress in nanotechnology. This technique, however, is restricted to metal or semiconducting samples, as it requires a tiny current to stabilize the tip-sample distance with atomic scale precision. We developed a new imaging and feedback method that relies on true alternating current (AC) without any direct current (DC) component. This technique does not only enable the imaging on non-conducting surfaces with atomic step resolution, like (thin) glass and oxides, it provides also access to high-frequency electronic signal coming from the sample. We demonstrate that it is possible to measure on 25nm thick silicon oxide with 10 MHz tunneling current.

physics.ins-det

Charged-particle topology reconstruction with an in-liquid SiPM array

Liquid scintillator detectors instrumented with photosensors inside the scintillation volume preserve local optical information that is largely lost in conventional boundary-readout geometries. We demonstrate that this information is sufficient for charged-particle topology reconstruction using a sparse three-dimensional lattice of silicon photomultipliers. After validating the Geant4 detector response against measured photon-count distributions, a simulation-trained, time-informed convolutional neural network reconstructs the entry and exit points of through-going muons with median residuals of 1.91~cm and 2.39~cm, respectively. The reconstructed endpoints are geometrically consistent with acceptance regions defined by external trigger counters in cosmic-ray muon data. The same framework also reconstructs the production vertices of simulated positron starting-track events with a median residual of about 4.5~cm. These results establish the feasibility of topology-sensitive reconstruction using sparse in-liquid photosensor arrays in homogeneous liquid scintillator detectors.

physics.ins-det