Search arXivSearch

arXiv · 2609.26938

The Simons Observatory: Commissioning of the Mid-Frequency Small Aperture Telescopes

Abstract

The Simons Observatory (SO) is a cosmic microwave background (CMB) survey experiment observing from an altitude of 5,200 m in the Atacama Desert in Chile. The SO Small Aperture Telescopes (SATs) will cover six spectral bands between 30 and 280 GHz primarily to search for evidence of primordial gravitational waves in the large angular scale $B$-modes of the CMB polarization. The first two Mid-Frequency (MF) SATs, operating in the 90 and 150 GHz frequency bands, began commissioning observations in late 2023, and we present the results of those observations here. Each MF SAT operates with approximately 9,400 biased transition-edge sensors (TES) at 1 mm of precipitable water vapor (PWV), representing a typical 80% yield. Planet observations confirm the telescope optics performance, calibrate the instrument response, and measure the end-to-end optical efficiency of the SATs. The realized instrument efficiencies are within the range expected based on instrument model predictions. In nominal observing conditions, the noise equivalent temperatures from both telescopes combined are $2.4~\mathrm{μK_{CMB}\sqrt{s}}$ at 90 GHz and $3.2~\mathrm{μK_{CMB}\sqrt{s}}$ at 150 GHz, substantially outperforming the baseline instantaneous sensitivity targets for the observatory.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Kathleen Harrington, Remington Gerras, Nicholas Galitzki, Samuel Day-Weiss, Yoshinori Sueno, Thomas Alford, Michael J. Randall, Kyohei Yamada, Maximiliano Silva-Feaver, Kevin Crowley, Shunsuke Adachi, Alexandre E. Adler, Prakamya Agrawal, Simone Aiola, David Alonso, Kam Arnold, Susanna Azzoni, Andrew Bazarko, Sanah Bhimani, Simon Biquard, Bryce Bixler, Josh Borrow, Michael L. Brown, Erminia Calabrese, Yuji Chinone, Steve K. Choi, Nadia Dachlythra, Mark Devlin, Simon Dicker, Peter N. Dow, Shannon M. Duff, Jo Dunkley, Rolando Dunner, Daniel Dutcher, Hamza El Bouhargani, Josquin Errard, Allen Foster, Ken Ganga, John Groh, Yilun Guan, Jon E. Gudmundsson, Saianeesh Haridas, Masaya Hasegawa, Matthew Hasselfield, Shawn W. Henderson, Carlos Hervías-Caimapo, Adam D. Hincks, Renée Hložek, Johannes Hubmayr, Bradley R. Johnson, Yutaro Kasai, Brian Keating, Ben Keller, Theodore Kisner, Brian J. Koopman, Akito Kusaka, Adrian Lee, JB Lloyd, Anto Lonappan, Marius Lungu, Aashrita Mangu, Michael McCrackan, Jeff McMahon, Jenna Moore, Thomas W. Morris, Hironobu Nakata, Federico Nati, Laura Newburgh, David V. Nguyen, John Orlowski-Scherer, Lyman Page, Ioannis Paraskevakos, Tristan Pinsonneault-Marotte, Erik Rosenberg, Yuki Sakurai, Goureesankar Sathyanathan, Thomas P. Satterthwaite, Yudai Seino, Elle Shaw, Sara M. Simon, Suzanne T. Staggs, Junna Sugiyama, Junya Suzuki, Satoru Takakura, Osamu Tajima, Alex Thomas, Daniel B. Thomas, Tran Tsan, Eve Vavagiakis, Yuhan Wang, John Wilson. 2026-09-22. The Simons Observatory: Commissioning of the Mid-Frequency Small Aperture Telescopes. https://arxiv.org/abs/2609.26938

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Performance characterization of a new Structural and Thermal Architecture for a future spaceborne Closed-Cycle Dilution Refrigerator

A Structural and Thermal Model (STM) has been developed to support the new spaceborne Closed-Cycle Dilution Refrigerator (CCDR), which aims to provide continuous cooling at 100~mK for long-duration astrophysical missions. The STM is based on a hexapod architecture that ensures both thermal decoupling and mechanical robustness during launch. In this paper, we present the characterization of its thermal and mechanical performances. A dedicated experimental setup was used to investigate the thermal behavior of the STM across a broad temperature range. The study reveals limitations of the collar design, with incomplete power interception from thermal boundary resistances and vibration test failure traced to defective strut gluing. These results guide the next STM iteration with optimized collar and strut assembly for reliable CCDR operation in space.

astro-ph.IM

The Simons Observatory: Development of a Pipeline to Detect Rapid Transients in Time-Ordered Data

We introduce a method for detecting astrophysical transients evolving on timescales of milliseconds to minutes using cosmic microwave background (CMB) survey telescopes. While previous transient searches in CMB data operate in map space, our pipeline directly processes the raw time-ordered data, enabling sensitivity to fast, dynamic signals. We integrate our detection approach into the Simons Observatory time-domain pipeline and assess the performance by injecting symmetric, stellar flare-like light curves into simulated observations. For events flaring with a timescale of 0.5 s, the pipeline detects $\gtrsim90$ % of events at flux densities of 800, 1150, 1650, and 4250\,mJy when measured in the 93, 145, 225, and 280 GHz bands respectively. At a fixed peak flux density, the pipeline more readily detects longer flares. The limiting flux density for 90 % completeness is four times lower for a $\ge5$ s flare than for a 0.5 s flare, while the flux density limits for $\gtrsim50$ % detection efficiency are comparable to the rms noise of the time-ordered data. We are able to determine the position of detected events in each observing band, with a positional uncertainty at the detection threshold comparable to the telescope resolution at that band. These results demonstrate the readiness of this pipeline for incorporation into upcoming Simons Observatory data analyses.

astro-ph.IM

Thermal conductivity of various CFRPs from 100 mK to 20 K

Carbon-fiber-reinforced polymers (CFRPs) are some of the most useful materials for building spacecraft and aerospace tools. They are especially valuable for systems that work at extremely cold (cryogenic) temperatures because they are strong, lightweight, and don't transfer heat easily. In this study, researchers measured how well heat moves through several different types of carbon fiber samples, specifically T300, T700, HS40, M55J, and IMA, at different fiber layouts and densities. These measurements were taken at ultra-cold temperatures ranging from 100 mK to 20 K. The team used a newly developed analysis method to calculate the thermal conductivity for each sample. Finally, they shared how each material behaved at different temperatures and compared their findings to previous research.

astro-ph.IM