Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2609.40102

Passive Stiffness Shaping in Cable-Suspended Aerial Manipulation via Movable Compliant Anchors

Antonio Franchi·Amr Afifi
View original source ↗Read source document ↗Export metadata ↓

Abstract

Cable-suspended aerial manipulation offers a lightweight architecture for cooperative transportation and physical interaction, yet the passive mechanical response perceived at the load remains insufficiently understood and systematically exploited. This work interprets aerial vehicles as movable compliant anchors and develops a gravity-aware quasi-static theory for predicting and shaping the passive Cartesian stiffness of a suspended load. The formulation applies to an arbitrary number of aerial vehicles connected to a point load by taut, straight, inextensible cables. At a selected gravity-loaded equilibrium, aerial-anchor compliance and transverse cable geometric compliance combine in series within each leg, while the leg stiffnesses act in parallel on the load. For isotropic aerial-anchor behavior, each leg is exactly equivalent to a virtual unilateral elastic cable, revealing an axial--transverse stiffness decomposition governed by the equilibrium tension. These results define a nonlinear map from commanded-anchor configuration to passive load stiffness, whose differential enables local constraint-preserving shaping through anchor repositioning. A dynamic rigid-body validation framework with nonlinear vehicle control, elastic-damped tendons, and environmental contact is defined to assess when and to what extent the derived stiffness remains predictive beyond the assumptions of the analytical model.

Explore related subjects

cs.ROcs.MAcs.SYeess.SY

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Antonio Franchi, Amr Afifi. 2026-09-30. Passive Stiffness Shaping in Cable-Suspended Aerial Manipulation via Movable Compliant Anchors. https://arxiv.org/abs/2609.40102

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

An Real-Sim-Real (RSR) Loop Framework for Generalizable Robotic Policy Transfer

The sim-to-real gap remains a critical challenge in robotics, hindering the deployment of algorithms trained in simulation to real-world systems. We propose a flexible Real-to-Sim-to-Real (RSR) framework whose central contribution is an information-theoretic cost function that explicitly accounts for sim-to-real discrepancies. This cost balances two objectives, completing the task and steering the policy to collect real-world samples that are maximally informative for improving transfer. It can be integrated seamlessly into existing reinforcement learning algorithms (e.g., PPO, SAC) and ensures a balanced exploration of critical regions in the real domain. The framework treats differentiable simulation as optional: when a differentiable simulator is available, the collected informative data can also be used to tune simulator parameters. We implement the framework with the MuJoCo MJX platform and demonstrate its generality by evaluating on both manipulation tasks with a 6-DOF robotic arm and locomotion tasks on a legged robot. Empirical results show that our RSR loop yields more efficient data acquisition and substantially improves task performance in real-world that achieves a smoother sim-to-real transfer.

cs.RO↗
arXiv2026

Learning-Based Progressive Barrier Control for Robot Manipulators with Initial Errors Outside Prescribed Tracking Bounds

Robot manipulators may start a new task with a tracking error larger than the prescribed tolerance. Conventional barrier controllers generally require the initial error to lie within this tolerance, which prevents their direct use under such conditions. This paper develops a progressive barrier controller that gradually contracts an initial error bound to the required value within a prescribed time. The robot can therefore start outside the final bound, while the direct joint-position error satisfies it after the transition. The closed-form control law combines progressive barrier feedback with an online adaptive torque term based on an actor--critic structure. A Lyapunov analysis establishes bounded closed-loop signals and gives sufficient conditions for satisfaction of the final tracking bound. Two-link simulations consider large initial errors, actuator saturation, dynamic variations, disturbances, and measurement errors. The adaptive term reduces the median root-mean-square tracking error by 45.1\% compared with the zero-weight progressive barrier controller. The simulations also map the initial errors that can be handled at different transition times under fixed torque limits. Finally, an experiment on a Niryo Ned3 Pro illustrates tracking performance using measured position and motor-current data.

cs.RO↗
arXiv2026

BIM Informed Visual SLAM for Construction Environments

Monitoring building construction sites requires comparing the as-planned design with the as-built state, which can be estimated in real time using Simultaneous Localization and Mapping (SLAM) techniques. However, visual SLAM is prone to trajectory drift in construction environments, producing maps that are geometrically inaccurate with the actual environment. To address this limitation, we augment an existing RGB-D SLAM system with structural priors derived from the Building Information Model (BIM). The system associates detected walls with their BIM counterparts and includes these correspondences as geometric constraints in the back-end optimization, reducing drift and enhancing global consistency. The proposed method operates in real time and is validated on multiple real construction sites, achieving an average trajectory error reduction of 25.23% and a 7.14% improvement in map accuracy over state-of-the-art baselines. Robustness analyses further demonstrate resilience to incomplete BIM data and geometric discrepancies between as-planned models and the as-built environment.

cs.RO↗