1/f frequency-noise reduction in nanomechanical resonators by dissipation dilution

Abstract

The frequency noise of a resonant nanomechanical sensor is well understood down to its thermomechanical limit, but the longest useful averaging time is set by a flicker, or $1/f$, frequency-noise floor whose origin has remained unknown. We show that this floor is the thermal noise of the tension. By the fluctuation-dissipation theorem, the tension of a resonator with fixed ends fluctuates by an amount set by the loss angle of its material; for structural damping, these fluctuations produce $1/f$ frequency noise with a flicker coefficient $h_{-1}=E k_{\mathrm{B}} T/(2πVσ_0^2 Q_{\mathrm{el}})$, with $Q_{\mathrm{el}}$ the intrinsic loss under elongation, that contains no free parameter and is diluted by the tensile stress $σ_0$ in the same way as damping is in dissipation dilution. Silicon nitride strings and membranes from 30 to 340~nm thickness follow the predicted volume scaling, the predicted $σ_0^{-2}$ dilution across resonators and within stress-engineered strings, and the predicted thickness dependence, which places noise-active two-level systems in the volume and at the surfaces of the resonators, all at the absolute level set by the independently measured intrinsic loss. The same relation accounts for published data between 78 and 296~K; below 78~K, the loss measured at the resonance no longer represents the loss probed by the noise, marking the limit of the structural-damping assumption. Dissipation dilution therefore lowers the $1/f$ floor, and the longest useful integration time of a resonant sensor is set by its prestress, volume, temperature, and intrinsic loss angle.