Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · 2610.17822

Practical Mid-infrared Dual-comb Spectroscopy with Absolute Frequency Referencing Based on a Single-cavity Dual-comb Fiber Laser

Akifumi Asahara·Kaoru Minoshima
View original source ↗Read source document ↗Export metadata ↓

Abstract

We demonstrate a practical mid-infrared (MIR) dual-comb spectroscopy (DCS) method based on a bidirectional dual-comb fiber laser. By exploiting the inherently high relative stability and mutual coherence of the dual-comb laser, we stabilize the MIR dual-comb modes with sufficient precision using only piezoelectric control of the repetition frequencies. This simple configuration enables correction of residual timing jitter and phase noise in interferograms while preserving the absolute optical frequency scale defined by the experimentally obtained comb parameters, without requiring an external continuous-wave laser reference or tight phase-locking. Importantly, the proposed method does not merely produce apparently clean interferograms through signal processing, but enables coherent averaging while retaining both the physically meaningful interferometric waveforms and well-defined absolute frequency information. The proposed system is experimentally validated through MIR spectroscopy of N$_2$O around 3.9 $μ$m, achieving a signal-to-noise ratio of approximately 690 through coherent averaging of 10,000 interferograms over 65 s, along with the acquisition of an absorption spectrum consistent with the reference data. These results demonstrate a simple and practical approach to absolute-frequency-referenced MIR-DCS.

Explore related subjects

physics.optics

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Akifumi Asahara, Kaoru Minoshima. 2026-10-13. Practical Mid-infrared Dual-comb Spectroscopy with Absolute Frequency Referencing Based on a Single-cavity Dual-comb Fiber Laser. https://arxiv.org/abs/2610.17822

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Photonic reservoir computing with complex networks

Photonic reservoir computing has attracted increasing attention as a fast and low-cost approach for time-series prediction. Photonic reservoir computing utilizes the high speed, broad bandwidth, and spatial parallelism of light. However, the effect of the internal connection structure (network topology) on the computing performance has not been investigated for large-scale photonic reservoirs. In this study, we experimentally and numerically demonstrate photonic reservoir computing using a spatial light modulator to systematically evaluate the relationship between the network topology and the performance of reservoir computing. We introduce complex network structures such as small-world and scale-free network topologies of the internal nodes in the reservoir. We perform the memory capacity measurement and the one-step-ahead prediction task of the chaotic time series to compare the performance. We found that the small-world network exhibits the maximum memory capacity and the best prediction performance. Our numerical calculations reveal that the performance of the time-series prediction can be optimized by changing the rewiring probability of the network and the leak rate of the reservoir. We also implement photonic human brain network as a reservoir, which is designed by the connectomes of human brain activities. We found that the network topology strongly affects the performance of reservoir computing, and the small-world network structure outperforms the other configurations.

physics.optics↗
arXiv2026

Approximate reservoir computing with a semiconductor laser for reducing energy consumption

Photonic reservoir computing is a promising physical machine-learning approach for time-series prediction. Quantization of the reservoir response signal is an important consideration in the implementation of photonic reservoir computing, and the number of quantization bits and sampling frequency need to be optimized to achieve high prediction performance and low energy consumption. However, few studies have investigated the effects of the number of quantization bits and sampling frequency on both prediction performance and energy consumption. In this study, we introduce the concept of approximate reservoir computing with a semiconductor laser by quantizing the reservoir node states and output weights. We numerically evaluate the performance of a chaotic time-series prediction task and estimate the energy consumption per sample using a component-level model. By optimizing the number of quantization bits, the sampling frequency, and the injection current of the semiconductor laser, we achieve a significant reduction in the estimated energy consumption per sample while maintaining prediction performance. We also obtain model-based estimates of the throughput, energy efficiency, and energy per operation of the proposed reservoir-computing system.

physics.optics↗
arXiv2026

Fabrication-Aware Design of a Hybrid Metasurface-Bragg Mirror for Low-Noise Precision Optics

High-reflectivity coatings for precision interferometry must simultaneously minimize optical losses and thermally driven displacement noise. Dielectric Bragg mirrors provide robust high reflectance but rely on thick multilayer coatings, whereas metasurface mirrors provide high reflectance and low noise but are sensitive to fabrication-induced deviations. A fabrication-aware photonic design framework is introduced that combines a resonant single-layer metasurface, an etch-stop layer, an antiresonant spacer, and a reduced Bragg reflector. Fabrication effects, including geometric tolerances and line-edge roughness, are explicitly considered in the optical design. Full-wave electromagnetic simulations are combined with a truncated-Gaussian Monte Carlo analysis to determine the performance distribution under the assumed fabrication conditions. The ideal metasurface design achieves a modeled non-reflected power of $1-R<10^{-5}$. After roughness-aware reoptimization, the modeled non-reflected power remains below $1.04\cdot10^{-4}$ at $80\%$ fabrication yield. For the cryogenic ETpathfinder gravitational-wave testbed, two Bragg layer pairs reduce the non-reflected power of the complete stack to approximately $6.6\,\mathrm{ppm}$. The estimated thermal displacement-noise amplitude spectral density is $1.97\cdot10^{-20}\,\mathrm{m/\sqrt{Hz}}$ at $100\,\mathrm{Hz}$. The architecture connects fabrication robustness, optical performance, and thermal-noise reduction within a single design framework.

physics.optics↗