CLIS-MPPI: Closed-Loop Model Predictive Path Integral Control With Initial-State Sampling Under Execution Delay

Zidong Liu; Xu Chen

Home/Archive/arXiv

arXiv · 2610.21239

CLIS-MPPI: Closed-Loop Model Predictive Path Integral Control With Initial-State Sampling Under Execution Delay

Zidong Liu·Xu Chen

View original source ↗Read source document ↗Export metadata ↓

Abstract

Sampling-based motion planning such as Model Predictive Path Integral (MPPI) control has become attractive for robotics due to its ability to handle nonlinear dynamics and non-smooth objectives without gradient information, while leveraging parallel rollout computation for real-time performance. However, in real-world robotic systems, the optimized control input is often applied after a non-negligible planning delay, causing a mismatch between the state used in forward simulation and the actual state at control execution, which can significantly degrade planning accuracy and may even lead to unsafe behavior such as collisions. This paper proposes Closed-Loop MPPI with Initial-State Sampling (CLIS-MPPI), which explicitly addresses execution-time state mismatch by modeling planning delay as a distribution over plausible execution-time initial states, performing rollout optimization from sampled initial states, and applying a rollout-based local feedback correction during control execution. The proposed method is validated through real-world experiments on a 6-DoF UR5e manipulator in a narrow-passage task involving obstacle avoidance and end-effector target reaching. Across 5 real-world runs of the same task, standard MPPI collided in 2 runs, whereas CLIS-MPPI remained collision-free in all 5 runs. Averaged over all collision-free runs for each method (3 for MPPI and 5 for CLIS-MPPI), CLIS-MPPI reduced the average task completion time from 25.4s to 24.4s and the average end-effector path length from 0.456 m to 0.425 m. It also reduced the overall joint-position and joint-velocity root mean square errors (RMSEs) from 0.100 rad and 0.108 rad/s to 0.017 rad and 0.011 rad/s, respectively. These results demonstrate improved safety, planning-execution consistency, and motion smoothness.

Explore related subjects

cs.RO

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Zidong Liu, Xu Chen. 2026-10-15. CLIS-MPPI: Closed-Loop Model Predictive Path Integral Control With Initial-State Sampling Under Execution Delay. https://arxiv.org/abs/2610.21239

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Self-Refining Vision Language Model for Robotic Failure Detection and Reasoning

Reasoning about failures is crucial for building reliable and trustworthy robotic systems. Prior approaches either treat failure reasoning as a closed-set classification problem or assume access to ample human annotations. Failures in the real world are typically subtle, combinatorial, and difficult to enumerate, whereas rich reasoning labels are expensive to acquire. We address this problem by introducing ARMOR: Adaptive Round-based Multi-task mOdel for Robotic failure detection and reasoning. We formulate detection and reasoning as a multi-task self-refinement process, where the model iteratively predicts detection outcomes and natural language reasoning conditioned on past outputs. During training, ARMOR learns from heterogeneous supervision - large-scale sparse binary labels and small-scale rich reasoning annotations - optimized via a combination of offline and online imitation learning. At inference time, ARMOR generates multiple refinement trajectories and selects the most confident prediction via a self-certainty metric. Experiments across diverse environments show that ARMOR achieves state-of-the-art performance by improving over the previous approaches by up to 30% on failure detection rate and up to 100% in reasoning measured through LLM fuzzy match score, demonstrating robustness to heterogeneous supervision and open-ended reasoning beyond predefined failure modes. We provide additional visualizations on our website: https://sites.google.com/utexas.edu/armor

cs.RO↗

arXiv2026

DGS-Net: Learning Dexterous Grasps from Single-View Point Clouds via a Multi-Object Scene Dataset

Dexterous grasping in multi-object scene constitutes a fundamental challenge in robotic manipulation. Current mainstream grasping datasets predominantly focus on single-object scenarios and predefined grasp configurations, often neglecting environmental interference and the modeling of dexterous pre-grasp gesture, thereby limiting their generalizability in real-world applications. To address this, we propose DGS-Net, an end-to-end grasp prediction network capable of learning dense grasp configurations from single-view point clouds in multi-object scene. Furthermore, we propose a two-stage grasp data generation strategy that progresses from dense single-object grasp synthesis to dense scene-level grasp generation. Our dataset comprises 307 objects, 240 multi-object scenes, and over 350k validated grasps. By explicitly modeling grasp offsets and pre-grasp configurations, the dataset provides more robust and accurate supervision for dexterous grasp learning. Experimental results show that DGS-Net achieves grasp success rates of 88.63\% in simulation and 78.98\% on a real robotic platform, while exhibiting lower penetration with a mean penetration depth of 0.375 mm and penetration volume of 559.45 mm^3, outperforming existing methods and demonstrating strong effectiveness and generalization capability. Our dataset is available at https://github.com/4taotao8/DGS-Net.

cs.RO↗

arXiv2026

F2F-AP: Flow-to-Future Asynchronous Policy for Real-time Dynamic Manipulation

Asynchronous inference has emerged as a prevalent paradigm in robotic manipulation, achieving significant progress in ensuring trajectory smoothness and efficiency. However, a systemic challenge remains unresolved, as inherent latency causes generated actions to inevitably lag behind the real-time environment. This issue is particularly exacerbated in dynamic scenarios, where such temporal misalignment severely compromises the policy's ability to interpret and react to rapidly evolving surroundings. In this paper, we propose a novel framework that leverages predicted object flow to synthesize future observations, incorporating a flow-based contrastive learning objective to align the visual feature representations of predicted observations with ground-truth future states. Empowered by this anticipated visual context, our asynchronous policy gains the capacity for proactive planning and motion, enabling it to explicitly compensate for latency and robustly execute manipulation tasks involving actively moving objects. Experimental results demonstrate that our approach significantly enhances responsiveness and success rates in complex dynamic manipulation tasks.

cs.RO↗