Search arXiv⌕ Search

arXiv · 2611.07862

On the aerodynamics of an accelerating and decelerating propeller in hover at low Reynolds numbers

Abstract

Small unmanned aerial vehicles commonly regulate propeller thrust through rapid changes in rotational speed, yet it remains unclear how the inflow, the wake, and the near-surface velocity respond to these changes at low Reynolds numbers. A commercial two-bladed propeller was tested in hover with custom blade holders at three additional pitch offsets relative to the original blade geometry, $Θ=\,$0, 5, and $10^\circ$, and accelerated and decelerated between 3000 and 5000 RPM with open-loop step responses. The resulting nondimensional acceleration and deceleration numbers, below 0.011 and 0.007, suggest negligible acceleration effects. Phase-locked particle image velocimetry (PIV) at 40, 60, and $80\,\%$ rotor radius and in the meridian plane was combined with load measurements. The thrust coefficient responds quasi-steadily at $Θ= 10^\circ$, but shows hysteresis at the higher pitch offsets, with lower values during acceleration and higher values during deceleration than under steady conditions. This trend opposes expectations from dynamic inflow theory. The effect is largest at $Θ= 5^\circ$, with deviations from the steady values of up to 8\,% during acceleration and $5\,\%$ during deceleration, compared with $4\,\%$ and $3\,\%$ at $Θ= 10^\circ$. PIV reveals that the rotor-disk inflow, blade deformation, and sectional circulation remain largely quasi-steady, whereas velocity fluctuations, blade-wake vorticity, and tip-vortex circulation vary strongly, with the largest deviations at low rotational speeds rather than at peak acceleration or deceleration.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Manuel Ratz, Christophe Schram, A. Sciacchitano, Miguel A. Mendez. 2026-11-05. On the aerodynamics of an accelerating and decelerating propeller in hover at low Reynolds numbers. https://arxiv.org/abs/2611.07862

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Geometry-induced self-excited dynamo in a regular tetrahedron

We present a rotation-free magnetohydrodynamic dynamo driven by laminar thermal convection in a regular tetrahedral cavity. The tetrahedral boundaries organize the convective flow into a robust pattern of helical convection cells without global rotation or turbulence. Direct numerical simulations demonstrate exponential amplification of a weak seed magnetic field followed by nonlinear saturation. In the reference calculation, the saturated magnetic energy exceeds the kinetic energy. The velocity field develops $D_4$ dihedral symmetry, while the self-generated magnetic field exhibits a corresponding signed $D_4$ symmetry, including antisymmetry under $π$ rotations about the two horizontal axes. Analysis of the velocity and magnetic-field structures reveals a closed induction cycle sustained by geometry-induced helical convection. This system provides a conceptually simple setting for isolating and understanding the fundamental physical processes underlying magnetohydrodynamic dynamo action.

physics.flu-dyn↗

Projection-based segregated, iterative, and multi-stage physics-informed neural network for incompressible Navier-stokes equations

Physics-informed neural networks(PINNs) offer a mesh-free and continuously differentiable approach to fluid simulation. However, standard monolithic PINNs for incompressible Navier-Stokes (NS) equations often suffer from severe constraint coupling and spectral biases, limiting both convergence and accuracy. To address this challenge, we propose a segregated, iterative, and multi-stage PINN (SIM-PINN) inspired by the classical projection method in computational fluid dynamics. In SIM-PINN, the nonlinear NS equations are decoupled into the linearized momentum and pressure Poisson equations. Each is addressed separately using dedicated multi-stage neural networks and coupled through projection-based inner iterations. Each stage of the multi-stage neural networks for the momentum equations corresponds to one iteration of the projection method, in which the velocity fields are progressively refined at targeted frequencies. Upon iteration convergence, solutions to the fully coupled and nonlinear NS equations are recovered. By integrating the segregated and iterative framework with the multi-stage training, SIM-PINN alleviates the optimization difficulties of the incompressible NS equations arising from nonlinearity, constraint coupling, and spectral biases. The improved convergence and accuracy are demonstrated by simulations of steady lid-driven cavity and unsteady Kolmogorov flows.

physics.flu-dyn↗

Bayesian Kolmogorov-Arnold networks for trustworthy Reynolds-stress closures

Data-driven turbulence closures can improve Reynolds-averaged Navier-Stokes (RANS) predictions, but their use is limited by two issues: learned constitutive relations are often difficult to inspect, and predictions typically lack reliable uncertainty estimates. We develop a Bayesian tensor-basis Kolmogorov-Arnold network (BKAN) for Reynolds-stress anisotropy that addresses both within a single closure. Learnable univariate spline functions on network edges provide an inspectable representation that can, where sufficiently simple, be approximated symbolically. Variational posteriors over spline coefficients yield a predictive distribution separating epistemic uncertainty, due to limited training data, from aleatoric uncertainty, the irreducible scatter of high-fidelity targets at given inputs. Galilean and rotational invariance, symmetry, and tracelessness are enforced through the tensor basis, while physical realisability is treated separately through soft regularisation. A controlled regression benchmark assesses predictive accuracy, calibration, and Bayesian parameterisation. Placing the posterior on spline coefficients gives the best overall balance of accuracy, calibration, parameter cost, and interpretability. Applied to Reynolds-stress anisotropy, the BKAN is accurate in distribution, with calibrated, informative uncertainty that tends to identify larger prediction errors. Under geometric extrapolation, however, the model becomes overconfident: epistemic uncertainty increases but does not fully account for growing prediction errors. Finally, the framework is extended to three-dimensional wind-farm wakes, where the learned correction transfers to unseen layouts and posterior samples are propagated through the RANS solver, with the aleatoric component injected as a spatially correlated field, to obtain uncertainty bounds on the predicted wake flow.

physics.flu-dyn↗