Development of scintillating fiber detector technology for high rate particle tracking

Abstract

The performance of a scintillating fiber detector prototype for tracking under high rate conditions is investigated. A spatial resolution of about100 micron is aimed for the detector. Further demands are low occupancy and radiation hardness up to 1 Mrad/year. Fibers with different radii and different wavelengths of the scintillation light from different producers have been extensively tested concerning light output, attenuation length and radiation hardness, with and without coupling them to light guides of different length and diameter. In a testrun at a 3 GeV electron beam the space dependent efficiency and spatial resolution of fiber bundels were measured by means of two external reference detectors with a precision of 50 micron. The light output profile across fiber roads has been determined with the same accuracy. Different technologies were adopted for the construction of tracker modules consisting of 14 layers of 0.5 mm fibers and 0.7 mm pitch. A winding technology provides reliable results to produce later fiber modules of about 25 cm x 25 cm area. We conclude that on the basis of these results a fiber tracker for high rate conditions can be built.