Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · physics/0107020

Feedback Systems for Linear Colliders

L. Hendrickson·P. Grossberg·T. Himel·M. Minty·N. Phinney·P. Raimondi·T. Raubenheimer·H. Shoaee·P. Tenenbaum
View original source ↗Read source document ↗Export metadata ↓

Abstract

Feedback systems are essential for stable operation of a linear collider, providing a cost-effective method for relaxing tight tolerances. In the Stanford Linear Collider (SLC), feedback controls beam parameters such as trajectory, energy, and intensity throughout the accelerator. A novel dithering optimization system which adjusts final focus parameters to maximize luminosity contributed to achieving record performance in the 1997-98 run. Performance limitations of the steering feedback have been investigated, and improvements have been made. For the Next Linear Collider (NLC), extensive feedback systems are planned as an intregal part of the design. Feedback requiremetns for JLC (the Japanese Linear Collider) are essentially identical to NLC; some of the TESLA requirements are similar but there are significant differences. For NLC, algorithms which incorporate improvements upon the SLC implementation are being prototyped. Specialized systems for the damping rings, rf and interaction point will operate at high bandwidth and fast response. To correct for the motion of individual bunches within a train, both feedforward and feedback systems are planned. SLC experience has shown that feedback systems are an invaluable operational tool for decoupling systems, allowing precision tuning, and providing pulse-to-pulse diagnostics. Feedback systems for the NLC will incorporate the key SLC features and the benefits of advancing technologies.

Explore related subjects

physics.acc-ph

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

L. Hendrickson, P. Grossberg, T. Himel, M. Minty, N. Phinney, P. Raimondi, T. Raubenheimer, H. Shoaee, P. Tenenbaum. 2001-07-10. Feedback Systems for Linear Colliders. https://doi.org/10.1109/pac.1999.795699

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

High-Intense Gamma-Ray Emission from a Crystalline Undulator with Realistic Bending Profiles

The development of compact and intense $γ$-ray sources in the MeV energy range remains a significant frontier in radiation physics, with profound implications for nuclear physics, medicine and applied science. In this work, we present a comprehensive numerical investigation of the photon emission probability and brilliance of a Crystalline Undulator (CU) based on a periodically bent Si(110) crystal. Our approach integrates realistic deformation profiles obtained via Finite Element Method simulations of a realistic sample, where bending is induced by patterned Si$_3$N$_4$ surface stressors. Relativistic molecular dynamics simulations, performed using the MBN Explorer software package, consider a 10 GeV positron beam consistent with the foreseen FACET-II facility specifications. Our results reveal a distinct undulator radiation peak in the 1.6-2.1 MeV range, well-separated from the broader channeling radiation background. We show that for an optimal aperture angle of $1/2γ$, the source reaches a maximum peak brilliance of about $5\times10^{22}$~photons/s/mm$^2$/mrad$^2$/0.1\%~BW. This performance is highly competitive with large-scale Gamma-Beam Systems and exceeds that of Inverse-Compton Scattering sources, confirming the potential of crystalline undulators as high-brilliance, compact light sources for the MeV domain.

physics.acc-ph↗
arXiv2026

Simulation study of accelerator-based muography using the GeV-scale forward muon component at SHINE

Muography exploits the penetrating power of muons to image the interior of large dense objects, but cosmic-ray sources provide only ~1 {cm}^{-2} {min}^{-1} predominantly from above, limiting imaging speed and accessible geometries. Electron-driven muon production has recently been demonstrated with laser-wakefield accelerators, but shot-to-shot fluctuations hinder systematic studies required for quantitative accelerator muography. Using Geant4 Monte Carlo simulations, we model the full experimental setup at Shaft 2 of the Shanghai High repetition rate XFEL and Extreme light facility (SHINE), from a 3 GeV, 50 pC, 50 Hz commissioning electron beam interacting with a muon target through 25 m of beamline structures and a 3 m-thick concrete isolation wall. Approximately 0.28 effective reconstructed single-muon events per bunch, with residual kinetic energies below 1.2 GeV after traversing the wall, reach the downstream muography test area (~14 s^{-1}). The wall absorbs most charged background particles below ~1 GeV, while residual neutrons can be discriminated by their characteristic detector energy deposition. Scattering-tomography simulations show that $3\times 10^{5}$ effective muon events, accumulated in approximately 6 h at the commissioning rate, yield a Structural Similarity Index above 0.9, demonstrating the feasibility of quantitative accelerator-based muography using SHINE's electron-driven GeV-scale forward muon source. At the 8 GeV/50 kHz benchmark, the projected muon intensity exceeds $5 \times 10^{4}$ μ/s, corresponding conservatively to approximately one muon per bunch at the detector. This exceeds the cosmic-ray flux by orders of magnitude, while SHINE's superconducting linac provides a stable, controlled platform for developing electron-on-target muography.

physics.acc-ph↗
arXiv2026

Progress in Muon Cooling and Moderation Techniques

Muon beams are essential tools for a wide range of applications such as the search for rare muon decays and muon spectroscopy. However, conventional muon beams produced from pion decay have large emittance and broad momentum spread. Conventional beam-cooling techniques cannot improve the beam quality significantly owing to the 2.2 $μ$s muon mean lifetime. This has motivated the development of dedicated muon beam cooling and moderation methods. This review surveys the principal approaches, including ionisation cooling for high-brightness muon beams, low-energy muon moderation and frictional cooling for slow muon production, and laser ionisation of thermal muonium for ultra-low-emittance muon sources. The challenges associated with producing slow negative muons and emerging concepts based on cyclotron trapping and muon-catalysed fusion are also discussed. These complementary techniques offer promising pathways towards next-generation muon facilities and precision experiments.

physics.acc-ph↗