Search arXiv⌕ Search
Home/Archive/arXiv

arXiv · physics/0411222

The dependence of transverse and longitudinal resolutions on incident Gaussian beam widths in the illumination part of optical scanning microscopy

Hyung-Su Chon·Gisung Park·Sang-Bum Lee·Seokchan Yoon·Jaisoon Kim·Jai-Hyung Lee·Kyungwon An
View original source ↗Read source document ↗Export metadata ↓

Abstract

We studied both theoretically and experimentally the intensity distribution of a Gaussian laser beam when it was focussed by an objective lens with its numerical-aperture (NA) up to 0.95. Approximate formulae for full widths at half maximum (FWHM) of the intensity distribution at focus were derived for very large and very small initial beam waists with respect to the entrance pupil radius of the objective lens. In experiments the energy flux through a 0.5 micron pinhole was measured for various pinhole positions. We found that the FWHM's at focus in the transverse and the longitudinal directions do not increase much from the ultimate FWHM's until the input beam waist is reduced below the half of the entrance pupil radius. In addition, we observed significance of the spatial distribution of the input beam against a true Gaussian beam profile in the case of small initial beam waist. For high NA with resulting focal beam waists comparable to or smaller than the wavelength of the laser, the interaction between the electric field and the conducting surface of the pinhole caused the transverse FWHM to be measured slightly smaller than FWHM of the unperturbed intensity distribution convoluted with the pinhole opening.

Explore related subjects

physics.optics

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Hyung-Su Chon, Gisung Park, Sang-Bum Lee, Seokchan Yoon, Jaisoon Kim, Jai-Hyung Lee, Kyungwon An. 2006-05-03. The dependence of transverse and longitudinal resolutions on incident Gaussian beam widths in the illumination part of optical scanning microscopy. https://arxiv.org/abs/physics/0411222

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Mid-infrared reconfiguration of population flow in lanthanide nanocrystals

Converting mid-infrared (MIR) radiation to visible or near-infrared wavelengths is essential for imaging and sensing, yet achieving sensitive, low-power, and scalable detection remains challenging. Lanthanide nanocrystals provide an alternative through ratiometric luminescence but are typically constrained by Boltzmann statistics, which tie population distributions to lattice temperature and limit signal contrast. Here we show that MIR irradiation rebalances dissipative relaxation pathways, driving lanthanide emitters into a non-Boltzmann steady state that enables non-thermal control of population distributions. This allows emission behaviors inaccessible under thermal equilibrium. We exploit this regime to achieve linear MIR detection with respect to MIR power across 6.8 to 8.6 micrometers. The ratiometric response is intrinsically independent of the pump power, enabling operation at an ultralow excitation power of 10 uW, several orders of magnitude lower than conventional approaches. Using standard silicon photodetectors, we then demonstrate room-temperature MIR imaging with detection limits approaching 4 nW um-2. Our results establish lanthanide nanoparticles as an efficient platform for MIR conversion and sensing in nanophotonic systems.

physics.optics↗
arXiv2026

Metasurface-integrated VCSEL designed for polarization control in optical Ising machines

The orthogonal polarization states of vertical-cavity surface-emitting lasers (VCSELs) can be used to describe candidate solutions to the Ising Hamiltonian, which is useful for solving quadratic unconstrained binary optimization problems. However, the natural anisotropy of VCSELs tends to overly favor one polarization state, which impedes the system from working as desired. In this work, we have designed and fabricated a metasurface, which may lead to a VCSEL with reduced undesired anisotropy. By changing the geometric size of nano-structures in the metasurface, the polarization state of the output light can be altered. Based on the injection-locking theory and spin-flip model, we numerically show that VCSELs with lowered anisotropy are more easily affected by the injection locking needed in Ising systems. Additionally, we numerically study the evolution of a 3-bit VCSEL-based Ising system and verify that the computational accuracy of the photonic Ising machine can be improved to more than twice that of its counterpart with higher anisotropy.

physics.optics↗
arXiv2026

Topological Optical Frequency Combs

Optical frequency combs (OFCs) are revolutionary light sources characterized by discrete and equally spaced spectral lines, and they have found widespread applications in metrology, spectroscopy, and communications. In the early stages, OFCs were realized using mode-locked lasers. With advancements in the fabrication of high-quality factor ($Q$) microresonators and the increasing demand for miniaturized and integrable photonic chips, microresonator-based OFCs, commonly referred to as microcombs, have been developed. Although early studies of microcombs primarily focused on single microresonators or a few resonators, a significant breakthrough occurred in 2021 when it was theoretically predicted that light propagating in the topological edge channel of an array of ring resonators could generate nested frequency combs known as topological OFCs. Since then, the field of topological OFCs has progressed rapidly, with experimental observations made in 2024. This Perspective will introduce the history of OFCs, placing particular emphasis on the emergence and development of topological OFCs, as well as exploring the research challenges and opportunities associated with them.

physics.optics↗