arXiv subjects
Publications and source records attributed to A. Juste.
We review the asymmetries in top quark pair production at the Tevatron and the LHC. We summarize the experimental measurements and the interpretations of a possible excess in terms of new physics. We also review other top quark properties-emphasizing effects related to the $t \bar t$ asymmetries-as well as other collider signals.
We investigate a charge asymmetry in $t \bar t \gamma$ production at the LHC that provides complementary information to the measured asymmetries in $t \bar t$ production. We estimate the experimental uncertainty in its measurement at the LHC with 8 and 14 TeV. For new physics models that simultaneously reproduce the asymmetry excess in $t \bar t$ at the Tevatron and the SM-like asymmetry at the LHC, the measurement in $t \bar t \gamma$ at the LHC could exhibit significant deviations with respect to the SM prediction.
This report summarizes the work of the Energy Frontier Top Quark working group of the 2013 Community Summer Study (Snowmass).
We introduce the forward-backward asymmetries A_u, A_d corresponding to u ubar, d dbar -> t tbar production, respectively, at hadron colliders. These are collider- and center-of-mass-independent observables, directly related to the forward-backward and charge asymmetries measured at the Tevatron and the LHC, respectively. We discuss how to extract these asymmetries from data. Because these asymmetries are collider-independent, their measurement at these two colliders could elucidate the nature of the anomalous forward-backward asymmetry measured at the Tevatron. Our framework also shows in a model-independent fashion that a positive Tevatron asymmetry exceeding the standard model expectation is compatible with the small asymmetry measured at the LHC.
We propose a kinematical enhancement of the t tbar charge asymmetry at the LHC by selecting events with the t tbar centre of mass frame highly boosted along the beam axis. This kinematical selection increases the asymmetries and their significance up to a factor of two in a rather model-independent fashion. Hence, it can be a perfect complement to enhance model discrimination at the LHC.
This paper describes the mechanical design, the readout chain, the production, testing and the installation of the Silicon Microstrip Tracker of the D0 experiment at the Fermilab Tevatron collider. In addition, description of the performance of the detector during the experiment data collection between 2001 and 2010 is provided.
Discoveries at the LHC will soon set the physics agenda for future colliders. This report of a CERN Theory Institute includes the summaries of Working Groups that reviewed the physics goals and prospects of LHC running with 10 to 300/fb of integrated luminosity, of the proposed sLHC luminosity upgrade, of the ILC, of CLIC, of the LHeC and of a muon collider. The four Working Groups considered possible scenarios for the first 10/fb of data at the LHC in which (i) a state with properties that are compatible with a Higgs boson is discovered, (ii) no such state is discovered either because the Higgs properties are such that it is difficult to detect or because no Higgs boson exists, (iii) a missing-energy signal beyond the Standard Model is discovered as in some supersymmetric models, and (iv) some other exotic signature of new physics is discovered. In the contexts of these scenarios, the Working Groups reviewed the capabilities of the future colliders to study in more detail whatever new physics may be discovered by the LHC. Their reports provide the particle physics community with some tools for reviewing the scientific priorities for future colliders after the LHC produces its first harvest of new physics from multi-TeV collisions.
We discuss possibilities to measure the tt-gamma and ttZ couplings at hadron and lepton colliders. We also briefly describe how these measurements can be used to constrain the parameter space of models of new physics, in particular Little Higgs models.
Ten years after its discovery at the Tevatron collider, we still know little about the top quark. Its large mass suggests it may play a key role in the mechanism of Electroweak Symmetry Breaking (EWSB), or open a window of sensitivity to new physics related to EWSB and preferentially coupled to it. To determine whether this is the case, precision measurements of top quark properties are necessary. The high statistics samples being collected by the Tevatron experiments during Run II start to incisively probe the top quark sector. This report summarizes the experimental status of the top quark, focusing in particular on the recent measurements from the Tevatron.
This report discusses several topics in both top quark physics and QCD at an International Linear Collider (ILC). Issues such as measurements at the $t\bar{t}$ threshold, including both theoretical and machine requirements, and the determination of electroweak top quark couplings, are reviewed. New results concerning the potential of a 500 GeV $e^+e^-$ collider for measuring $Wtb$ couplings and the top quark Yukawa coupling are presented. The status of higher order QCD corrections to jet production cross sections, heavy quark form factors, and longitudinal gauge boson scattering, needed for percent-level studies at the ILC, are reviewed. A new study of the measurement of the hadronic structure of the photon at a $γγ$ collider is presented. The effects on top quark properties from several models of new physics, including composite models, Little Higgs theories, and CPT violation, are studied.
A precise measurement of the top quark Yukawa coupling is of great importance, since it may shed light on the mechanism of EWSB. We study the prospects of such measurement during the first phase of the ILC at sqrt(s)=500 GeV, focusing in particular on recent theoretical developments as well as the potential benefits of beam polarization. It is shown that both yield improvements that could possibly lead to a measurement competitive with the LHC.
We consider QCD tt~Z production at the LHC with Z->\barννand all-hadronic tt~ decays, i.e. pp -> p_T(miss)bb~+4 jets, as a tool to measure ttZ couplings. This channel has a significantly larger cross section than those where the Z boson decays leptonically. However, tt~, bb~+4 jet, tt~j and tt~jj production give rise to potentially large backgrounds. We show that these processes can be suppressed to an acceptable level with suitable cuts, and find that adding the p_T(miss)bb~+4 jet channel to the final states used in previous ttZ couplings analyses will improve the sensitivity by 10-60%. We also discuss how the measurement of the ttZ couplings may constrain Little Higgs models.
Ten years after its discovery at the Tevatron collider, we still know little about the top quark. Its large mass suggests it may play a key role in the mechanism of Electroweak Symmetry Breaking (EWSB), or open a window of sensitivity to new physics related to EWSB and preferentially coupled to it. To determine whether this is the case, precision measurements of top quark properties are necessary. The high statistics samples being collected by the Tevatron experiments during Run II start to incisively probe the top quark sector. This report summarizes the experimental status of the top quark, focusing in particular on the recent measurements from the Tevatron Run II.
We consider QCD t\bar{t}γand t\bar{t}Z production at hadron colliders as a tool to measure the ttγand ttZ couplings. At the Tevatron it may be possible to perform a first, albeit not very precise, test of the ttγvector and axial vector couplings in t\bar{t}γproduction, provided that more than 5 fb^{-1} of integrated luminosity are accumulated. The t\bar{t}Z cross section at the Tevatron is too small to be observable. At the CERN Large Hadron Collider (LHC) it will be possible to probe the ttγcouplings at the few percent level, which approaches the precision which one hopes to achieve with a next-generation e^+e^- linear collider. The LHC's capability of associated QCD t\bar{t}V (V=γ, Z) production has the added advantage that the ttγand ttZ couplings are not entangled. For an integrated luminosity of 300 fb^{-1}, the ttZ vector (axial vector) coupling can be determined with an uncertainty of 45-85% (15-20%), whereas the dimension-five dipole form factors can be measured with a precision of 50-55%. The achievable limits improve typically by a factor of 2-3 for the luminosity-upgraded (3 ab^{-1}) LHC.
Physics at the Large Hadron Collider (LHC) and the International e+e- Linear Collider (ILC) will be complementary in many respects, as has been demonstrated at previous generations of hadron and lepton colliders. This report addresses the possible interplay between the LHC and ILC in testing the Standard Model and in discovering and determining the origin of new physics. Mutual benefits for the physics programme at both machines can occur both at the level of a combined interpretation of Hadron Collider and Linear Collider data and at the level of combined analyses of the data, where results obtained at one machine can directly influence the way analyses are carried out at the other machine. Topics under study comprise the physics of weak and strong electroweak symmetry breaking, supersymmetric models, new gauge theories, models with extra dimensions, and electroweak and QCD precision physics. The status of the work that has been carried out within the LHC / LC Study Group so far is summarised in this report. Possible topics for future studies are outlined.
We present preliminary results on the search for single top quark production and measurements of top quark decay properties by the CDF and D0 collaborations of the Fermilab Tevatron collider, using datasets of 108-164 pb^-1 of proton-antiproton collisions.
Previous studies of the physics potential of LEP2 indicated that with the design luminosity of 500 inverse picobarn one may get a direct measurement of the mass of the W-boson with a precision in the range 30 - 50 MeV. This report presents an updated evaluation of the estimated error on the mass of the W-boson based on recent simulation work and improved theoretical input. The most efficient experimental methods which will be used are also described.