arXiv subjects

Adam Patel

Publications and source records attributed to Adam Patel.

6 recordsLinked to original sources

arXiv2024

One-dimensional mapping of femtosecond laser filaments using coherent microwave scattering

This paper reports on the use of coherent microwave scattering (CMS) for spatially resolved electron number density measurements of elongated plasma structures induced at mid-IR femtosecond filamentation in air. The presented studies comprise one-dimensional mapping of laser filaments induced via 3.9 um, 127.3 fs laser pulses at output energies up to 15 mJ. The axial electron number density was measured to be invariant (about 2x10$^{15}$ cm$^{-3}$) along the entire filament length and for all tested laser pulse energies 5-15 mJ, and the corresponding laser intensity in the middle portion of the filament was estimated to be nearly constant for 5-15 mJ pulse energies (about 30-40 TW/cm$^2$). These fundings support that intensity clamping conditions were achieved in the experiments. The proposed approach enables capabilities that are currently unavailable to perform absolute and longitudinally resolved measurements of electron number density in laser filaments and to precisely characterize conditions associated with self-focusing and intensity clamping.

physics.plasm-ph↗

arXiv2023

Geometrically-frustrated interactions drive structural complexity in amorphous calcium carbonate

Amorphous calcium carbonate (ACC) is an important precursor for biomineralisation in marine organisms. Among the key outstanding problems regarding ACC are how best to understand its structure and how to rationalise its metastability as an amorphous phase. Here, we report high-quality atomistic models of ACC generated by using state-of-the-art interatomic potentials to help guide fits to X-ray total scattering data. Exploiting a recently-developed inversion approach, we extract from these models the effective Ca$\boldsymbol\cdots$Ca interaction potential governing ACC formation. This potential contains minima at two competing distances, corresponding to the two different ways in which carbonate ions bridge Ca$^{2+}$-ion pairs. We reveal an unexpected mapping to the Lennard-Jones--Gauss (LJG) model normally studied in the context of computational soft-matter, with the empirical LJG parameters for ACC taking values known to promote structural complexity. In this way we show that both the complex structure of ACC and its resilience to crystallisation are actually encoded in the geometrically-frustrated effective interactions between Ca$^{\boldsymbol 2+}$ ions.

cond-mat.mtrl-sci↗

arXiv2022

Ionization rate and plasma dynamics at 3.9 micron femtosecond photoionization of air

The introduction of mid-IR optical parametric chirped pulse amplifiers (OPCPAs) has catalyzed interest in multi-millijoule, infrared femtosecond pulse-based filamentation. As tunneling ionization is a fundamental first stage in these high-intensity laser-matter interactions, characterizing the process is critical to understand derivative topical studies on femtosecond filamentation and self-focusing. Here, we report constructive-elastic microwave scattering-based measurements of total electron count, electron number densities, and photoionization rates generated by 3.9 micron femtosecond mid-infrared tunneling ionization of atmospheric air. Consequently, we determine photoionization rates in the range of 5.0x10$^{8}$-6.1x10$^{9}$ s$^{-1}$ for radiation intensities 1.3x10$^{13}$-1.9x10$^{14}$ W/cm$^{2}$, respectively. The proposed approach paves the wave to precisely tabulate photoionization rates in mid-IR for broad range of intensities and gas types and to study plasma dynamics at mid-IR filamentation.

physics.plasm-ph↗

arXiv2022

Initial transient stage of pin-to-pin nanosecond repetitively pulsed discharges in air

In this work, evolution of parameters of nanosecond repetitively pulsed (NRP) discharges in pin-to-pin configuration in air was studied during transient stage of initial twenty discharge pulses. Gas and plasma parameters in the discharge gap were measured using coherent microwave scattering (CMS), optical emission spectroscopy (OES) and laser Rayleigh scattering (LRS) for NRP discharges at repetition frequencies of 1, 10 and 100 kHz. Memory effects (when perturbations induced by the previous discharge pulse would not decay fully till the subsequent pulse) were detected for the repetition frequencies of 10 and 100 kHz. For 10 kHz NRP discharge, the discharge parameters experienced significant change after the first pulse and continued to substantially fluctuate between the subsequent pulses due to rapid evolution of gas density and temperature during the 100 us inter-pulse time caused by intense redistribution of the flow field in the gap on that time scale. For 100 kHz NRP discharge, the discharge pulse parameters reached a new steady state at about five pulses after initiation. This new steady state was associated with well-reproducible parameters between the discharge pulses and substantial reduction of breakdown voltage, discharge pulse energy, and electron number density in comparison with the first discharge pulse.

physics.plasm-ph↗

arXiv2021

Experimental study of atmospheric pressure single-pulse nanosecond discharge in pin-to-pin configuration

In this work, we present an experimental study of nanosecond high-voltage discharges in a pin-to-pin electrode configuration at atmospheric conditions operating in single-pulse mode (no memory effects). Various discharge parameters, including voltage, current, gas density, rotational/vibrational/gas temperature, and electron number density, were measured. Several different measurement techniques were used, including microwave Rayleigh scattering, laser Rayleigh scattering, optical emission spectroscopy enhanced with a nanosecond probing pulse, fast photography, and electrical parameter measurements. Spark and corona discharge regimes were studied with discharge pulse duration of 90 ns and electrode gap sizes ranging from 2 to 10 mm. The spark regime was observed for gaps < 6 mm using discharge pulse energies of 0.6-1 mJ per mm of the gap length. Higher electron number densities, total electron number per gap length, discharge currents, and gas temperatures were observed for smaller electrode gaps and larger pulse energies, reaching maximal values of about 7.5x10^15 cm-3, 3.5x10^11 electrons per mm, 22 A, and 4,000 K (at 10 us after the discharge), respectively, for a 2 mm gap and 1 mJ/mm discharge pulse energy. Initial breakdown was followed by a secondary breakdown occurring about 30-70 ns later and was associated with ignition of a cathode spot and transition of the discharge to cathodic arc. A majority of the discharge pulse energy was deposited into the gas before the secondary breakdown (85-89%). The electron number density after the ns discharge pulse decayed with a characteristic time scale of 150 ns governed by dissociative recombination and electron attachment to oxygen mechanisms. For the corona regime, substantially lower pulse energies (~0.1 mJ/mm), peak conduction current (1-2 A), and electron numbers (3-5x10^10 electrons per mm), and gas temperatures (360 K) were observed.

physics.plasm-ph↗

arXiv2021

Combined Microwave and Laser Rayleigh Scattering Diagnostics for Pin-to-Pin Nanosecond Discharges

In this work, the temporal decay of electrons produced by an atmospheric pin-to-pin nanosecond discharge operating in the spark regime was measured via a combination of microwave Rayleigh scattering (MRS) and laser Rayleigh scattering (LRS). Due to the initial energy deposition of the nanosecond pulse, a variance in local gas density occurs on the timescale of electron decay. Thus, the assumption of a constant collisional frequency is no longer applicable when electron number data is extracted from the MRS measurements. To recalibrate the MRS measurements throughout the electron decay period, temporally-resolved LRS measurements of the local gas density were performed over the event duration. Local gas density was measured to be 30% of the ambient level during the later stages of electron decay and recovers at about 1 ms after the discharge. A shock front traveling approximately 500 m/s was additionally observed. Coupled with plasma volume calibration via temporally-resolved ICCD imaging, the corrected decay curves of the electron number and electron number density are presented with a measured peak electron number density of 4.5*10^15 cm^-3 and decay rate of ~ 0.1-0.35*10^7 s^-1. A hybrid MRS and LRS diagnostic technique can be applied for a broad spectrum of atmospheric-pressure microplasmas where a variation in number gas density is expected due to an energy deposition in the discharge.

physics.plasm-ph↗