arXiv subjects

Alexander Valavanis

Publications and source records attributed to Alexander Valavanis.

4 recordsLinked to original sources

arXiv2025

Improving terahertz-detection sensitivity of 8x8 FET arrays through liquid-nitrogen cooling in a compact low-noise cryostat

We show that the sensitivity of antenna-coupled field-effect transistors (FETs) to terahertz (THz) radiation improves continuously with decreasing temperature. The noise-equivalent power (NEP) of 540 GHz patch-antenna-coupled FETs decreases as temperature reduces to 20 K. We project NEP values approaching 1 to 2 pW/sqrt(Hz) under efficient power coupling conditions (e.g., using a superstrate Si-lens), which is comparable to superconducting niobium transition-edge sensors (TESs) at 4 K. Building on these findings, a compact, low-noise, liquid-nitrogen-cooled (77 K) FET-based direct (incoherent) THz-power sensing system} for spectroscopy applications was realized. Here, an 8x8 pixel-binned detector array fabricated in a commercial 65-nm Si-CMOS process, was optimized for operation in the 2.85 to 3.4 THz band. Characterization was performed in the focal plane of a 2.85-THz quantum-cascade laser delivering approx. 2~mW of THz power. A linear dynamic range exceeding 67 dB was achieved without saturation (for 1~Hz-detection bandwidth). The system provides a -3 dB readout bandwidth of 5 MHz, exceeding that of conventional thermal detectors (typically 1 kHz). Combined with its broad temperature operability 20 K to 300 K and compact design, the system is particularly well suited for space- and payload-constrained platforms such as balloon- and satellite-based missions, where deep cryogenic cooling is impractical.

physics.app-ph↗

arXiv2024

Detectorless 3D terahertz imaging: achieving subwavelength resolution with reflectance confocal interferometric microscopy

Terahertz imaging holds great potential for non-destructive material inspection, but practical implementation has been limited by resolution constraints. In this study, we present a single-pixel THz imaging system based on a confocal microscope architecture, utilising a quantum cascade laser as both transmitter and phase-sensitive receiver. Our approach integrates laser feedback interferometry detection to achieve a two-fold improvement in lateral resolution and a two-order-of-magnitude enhancement in axial resolution over conventional imaging through precise interferometric phase measurements. This translates to a lateral resolution near $\lambda/2$ and a depth of focus better than $\lambda/5$, significantly outperforming traditional confocal systems. The system can produce a 0.5 Mpixel image in under two minutes, surpassing both raster-scanning single-pixel and multipixel focal-plane array-based imagers. Coherent operation enables simultaneous amplitude and phase image acquisition, and a custom visualisation method links amplitude to image saturation and phase to hue, enhancing material characterisation. A 3D tomographic analysis of a silicon chip reveals subwavelength features, demonstrating the system's potential for high-resolution THz imaging and material analysis. This work sets a new benchmark for THz imaging, overcoming key challenges and opening up transformative possibilities for non-destructive material inspection and characterisation.

physics.optics↗

arXiv2024

8x8 Patch-Antenna-Coupled TeraFET Detector Array for Terahertz Quantum-Cascade-Laser Applications

Monolithically integrated, antenna-coupled field-effect transistors (TeraFETs) are rapid and sensitive detectors for the terahertz range (0.3-10~THz) that can operate at room temperature. We conducted experimental characterizations of a single patch-antenna coupled TeraFET optimized for 3.4~THz operation and its integration into an 8x8 multi-element detector configuration. In this configuration, the entire TeraFET array operates as a unified detector element, combining the output signals of all detector elements. Both detectors were realized using a mature commercial Si-CMOS 65-nm process node. Our experimental characterization employed single-mode Quantum-Cascade Lasers (QCLs) emitting at 2.85~THz and 3.4~THz. The 8x8 multi-element detector yields two major improvements for sensitive power detection experiments. First, the larger detector area simplifies alignment and enhances signal stability. Second, the reduced detector impedance enabled the implementation of a TeraFET+QCL system capable of providing a -3~dB modulation bandwidth up to 21~MHz, which is currently limited primarily by the chosen readout circuitry. Finally, we validate the system's performance by providing high resolution gas spectroscopy data for methanol vapor around 3.4~THz, where a detection limit of 1.6e-5 absorbance, or 2.6e11~molecules/cm^3 was estimated under optimal coupling conditions.

physics.ins-det↗

arXiv2023

Liquid-Crystal-Based Controllable Attenuators Operating in the 1-4 Terahertz Band

Liquid-crystal devices (LCDs) offer a potential route toward adaptive optical components for use in the < 2 THz band of the electromagnetic spectrum. We demonstrate LCDs using a commercially available material (E7), with unbiased birefringence values of 0.14-0.18 in the 0.3-4 THz band. We exploit the linear dichroism of the material to modulate the emission from a 3.4-THz quantum cascade laser by up to 40%, dependent upon both the liquid-crystal layer thickness and the bias voltage applied.

physics.optics↗