arXiv subjects

Branimir Ćaran

Publications and source records attributed to Branimir Ćaran.

6 recordsLinked to original sources

arXiv2026

Observability Analysis and Online Calibration of Visual-Inertial-Wheel Odometry for 4WIS4WID Mobile Robots

In this paper, we present a visual-inertial-wheel odometry (VIWO) framework with online calibration for four-wheel independently steered and driven (4WIS4WID) mobile robots. We derive a 2D odometry model directly from the four driving velocities and steering angles, using both the longitudinal rolling constraints and the lateral no-slip constraints of all wheels. A preintegration model and analytical Jacobians are developed for efficient filtering and calibration. An observability analysis of the linearized VIWO system shows that a drive-only model makes all steering offsets unobservable, whereas the proposed redundant model restores their observability. The analysis also identifies four standard VINS unobservable directions and three additional directions associated with the arbitrary placement of the odometry reference frame. Furthermore, we characterize several degenerate motions, including zero yaw rate, constant steering, and a non-rolling wheel, and derive the corresponding excitation conditions for the thirteen wheel intrinsics that remain after fixing the odometry frame reference. The performance of the proposed system has been demonstrated in both simulation and real-world experiments on a 4WIS4WID mobile robot.

cs.RO↗

arXiv2026

Lyapunov-Based PI-Like Control for Robust Trajectory Tracking of a Four-Wheel Independently Driven and Steered Robot: Design and Experimental Validation

In this paper, a Lyapunov-based synthesis of a PI-like controller is proposed for robust trajectory tracking of an independently driven and steered four-wheel mobile robot. For the robot considered in this work, an explicit structurally verified mathematical model is used to enable systematic controller design with rigorous stability guarantees suitable for real time implementation. An augmented Lyapunov-based practical stability analysis is developed for the combined velocity-error and integral-error dynamics of the inner loop, yielding explicit bounds and sufficient conditions for practical stability and uniform ultimate boundedness of the combined velocity-error and integral-error state. The resulting control law retains a PI-like structure with model-based feedforward compensation, making it suitable for implementation on standard embedded platforms while improving robustness against configuration dependent residual dynamics and unmodelled effects. The effectiveness and robustness of the proposed design are demonstrated experimentally on a four-wheel independently steered and independently driven mobile robot platform, under both horizontal and vertical operating conditions and benchmarked against a PI controller and a sliding-mode controller.

cs.RO↗

arXiv2026

EKF-Based Depth Camera and Deep Learning Fusion for UAV-Person Distance Estimation and Following in SAR Operations

Vision-based Unmanned Aerial Vehicles (UAVs) frameworks aid human search tasks by detecting and recognizing specific individuals, then tracking and following them while maintaining a safe distance. A key safety requirement for UAV following is the accurate estimation of the distance between camera and target object under real-world conditions, achieved by fusing multiple image modalities. As part of the system for automatic people detection and face recognition using deep learning, in this paper we present the fusion of depth camera measurements and monocular camera-to-body distance estimation for robust tracking and following. Deep learning based filtering of depth camera data and estimation of camera-to-body distance from a monocular camera are achieved with YOLO-pose, enabling real-time fusion of depth information using the Extended Kalman Filter (EKF) algorithm. The proposed subsystem, designed for use in drones, estimates and measures the distance between the depth camera and the human body keypoints, to maintain the safe distance between the drone and the human target. Our system provides an accurate estimated distance, which has been validated against motion capture ground truth data. The system has been tested in real time indoors, where it reduces the average errors, RMSE and standard deviations of distance estimation up to 15,3% in three tested scenarios. Based on the test results, the EKF fusion-based approach increases the depth detection range by reducing the errors outside the optimal depth camera working range. It also shows improved robustness and precision in challenging conditions, such as reflections and poor visibility, making it suitable for SAR.

cs.RO↗

arXiv2026

Autonomous overtaking trajectory optimization using reinforcement learning and opponent pose estimation

Vehicle overtaking is one of the most complex driving maneuvers for autonomous vehicles. To achieve optimal autonomous overtaking, driving systems rely on multiple sensors that enable safe trajectory optimization and overtaking efficiency. This paper presents a reinforcement learning mechanism for multi-agent autonomous racing environments, enabling overtaking trajectory optimization, based on LiDAR and depth image data. The developed reinforcement learning agent uses pre-generated raceline data and sensor inputs to compute the steering angle and linear velocity for optimal overtaking. The system uses LiDAR with a 2D detection algorithm and a depth camera with YOLO-based object detection to identify the vehicle to be overtaken and its pose. The LiDAR and the depth camera detection data are fused using a UKF for improved opponent pose estimation and trajectory optimization for overtaking in racing scenarios. The results show that the proposed algorithm successfully performs overtaking maneuvers in both simulation and real-world experiments, with pose estimation RMSE of (0.0816, 0.0531) m in (x, y).

cs.RO↗

arXiv2025

Odometry Calibration and Pose Estimation of a 4WIS4WID Mobile Wall Climbing Robot

This paper presents the design of a pose estimator for a four wheel independent steer four wheel independent drive (4WIS4WID) wall climbing mobile robot, based on the fusion of multimodal measurements, including wheel odometry, visual odometry, and an inertial measurement unit (IMU) data using Extended Kalman Filter (EKF) and Unscented Kalman Filter (UKF). The pose estimator is a critical component of wall climbing mobile robots, as their operational environment involves carrying precise measurement equipment and maintenance tools in construction, requiring information about pose on the building at the time of measurement. Due to the complex geometry and material properties of building facades, the use of traditional localization sensors such as laser, ultrasonic, or radar is often infeasible for wall-climbing robots. Moreover, GPS-based localization is generally unreliable in these environments because of signal degradation caused by reinforced concrete and electromagnetic interference. Consequently, robot odometry remains the primary source of velocity and position information, despite being susceptible to drift caused by both systematic and non-systematic errors. The calibrations of the robot's systematic parameters were conducted using nonlinear optimization and Levenberg-Marquardt methods as Newton-Gauss and gradient-based model fitting methods, while Genetic algorithm and Particle swarm were used as stochastic-based methods for kinematic parameter calibration. Performance and results of the calibration methods and pose estimators were validated in detail with experiments on the experimental mobile wall climbing robot.

cs.RO↗

arXiv2025

Autonomous UAV Navigation for Search and Rescue Missions Using Computer Vision and Convolutional Neural Networks

In this paper, we present a subsystem, using Unmanned Aerial Vehicles (UAV), for search and rescue missions, focusing on people detection, face recognition and tracking of identified individuals. The proposed solution integrates a UAV with ROS2 framework, that utilizes multiple convolutional neural networks (CNN) for search missions. System identification and PD controller deployment are performed for autonomous UAV navigation. The ROS2 environment utilizes the YOLOv11 and YOLOv11-pose CNNs for tracking purposes, and the dlib library CNN for face recognition. The system detects a specific individual, performs face recognition and starts tracking. If the individual is not yet known, the UAV operator can manually locate the person, save their facial image and immediately initiate the tracking process. The tracking process relies on specific keypoints identified on the human body using the YOLOv11-pose CNN model. These keypoints are used to track a specific individual and maintain a safe distance. To enhance accurate tracking, system identification is performed, based on measurement data from the UAVs IMU. The identified system parameters are used to design PD controllers that utilize YOLOv11-pose to estimate the distance between the UAVs camera and the identified individual. The initial experiments, conducted on 14 known individuals, demonstrated that the proposed subsystem can be successfully used in real time. The next step involves implementing the system on a large experimental UAV for field use and integrating autonomous navigation with GPS-guided control for rescue operations planning.

cs.RO↗