Search arXiv⌕ Search

arXiv subjects

Christoph Dellago

Publications and source records attributed to Christoph Dellago.

At least 19 recordsLinked to original sources

Towards decoding the structure of water-magnetite interface

The molecular structure of water at iron-oxide interfaces is determined by the protonation state, orientation and population of interfacial OH species. These microscopic features can be decoded by combining surface-specific vibrational spectroscopy with reactive and accurate molecular dynamics simulations. In this way, it could be possible to connect the measured nonlinear optical response to specific molecular configurations at the magnetite-water interface, resolving the interfacial water structure. We investigated magnetite films in contact with liquid water at neutral and alkaline pH using phase-resolved sum-frequency generation (SFG) spectroscopy in the OH/OD stretching region and Fresnel correction of the optical response. In parallel, neural-network-potential molecular dynamics simulations were used to model the water-magnetite interface and identify interfacial water species, quantify their orientations, hydrogen-bonding environments and lifetimes, and compute species resolved SFG spectra. The combined analysis assigns distinct spectral features to dissociated surface OH groups, hydroxyls and water molecules adsorbed on octahedral iron sites, water bound at dissociation sites and water molecules above tetrahedral rows. The simulations reveal a reactive interfacial hydroxyl network with nanosecond-scale rearrangements and strong species-dependent hydrogen bonding. Experimentally, the SFG spectra show pronounced pH dependence, consistent with changes in surface charge and hydroxylation. A systematic difference between measured and computed SFG spectra indicates that the assumed surface model of magnetite does not fully represent the aqueous interface. This discrepancy provides a molecular constraint for improved models of magnetite-water interfaces and highlights SFG spectroscopy/ML-MD comparison as a valuable route to resolving oxide-water interfacial structures.

cond-mat.mtrl-sci↗

Generative Nested Sampling of Atomistic Thermodynamic Landscapes

Nested sampling (NS) resolves the thermodynamics of an atomistic system from a single simulation, but its practical reach is limited by the Markov-chain updates needed to decorrelate walkers within each likelihood-constrained ensemble. Flow-based NS has reduced this bottleneck for gravitational-wave (GW) inference, yet its transfer to atomistic systems is not merely a change of application. Comparing a GW150914-like binary-black-hole likelihood with an eight-particle two-dimensional Lennard-Jones (LJ) system of comparable dimensionality, we show that the two landscapes differ fundamentally: atomistic multimodality is discrete and combinatorial, generated by particle permutations separated by hard collision walls, and its coordinate coupling is dense and collective, whereas the GW posterior exhibits smooth degeneracies and localized parameter coupling. Guided by this diagnosis, we introduce NS-Flows: a single conditional normalizing flow, conditioned on the NS energy bound and trained on a sliding window of recent live sets, that replaces MCMC by direct parallel draws corrected by importance-weighted rejection resampling. Live sets supply the data self-consistently, allowing flow training without structured priors or a pre-existing dataset. For LJ disks under periodic boundary conditions, the algorithm can reduce energy evaluations by two orders of magnitude and wall-clock time by about 30%, an advantage that becomes more favorable as the cost of the potential grows. The flow's generative efficiency further acts as a physical diagnostic: it varies non-monotonically along the annealing trajectory, is lowest in the dense disordered regime, and is quantitatively captured by the constrained ensemble's internal mode complexity together with target drift across the training window, identifying liquid-like ensembles, not prior-target separation, as the hard case for current flow architectures.

cond-mat.stat-mech↗

Correlation-Free Transition Path Sampling through Shooting Point Generation Guided by Committor Learning

Studying the dynamical behavior of a system often depends on characterizing how it transitions between long-lived states. Because such transitions are rare, observing them usually requires specialized enhanced sampling techniques. Transition Path Sampling (TPS) is a well-established method for generating reactive trajectories, which is simple to implement and does not require the definition of a preconceived reaction coordinate. However, its efficiency is limited by its sequential nature and the resulting correlations between sampled paths. Previous work addressed this limitation by combining TPS with a sampling scheme based on conditioned Boltzmann Generators, a generative machine learning model capable of sampling a given target probability distribution. This approach produces uncorrelated transition paths but relies on an accurate reaction coordinate, which is rarely known in advance. Building on recent advances in committor learning, specifically on the Artificial Intelligence for Molecular Mechanism Discovery (AIMMD) method, in this work we introduce GenAIMMD, an iterative algorithm that actively and self-consistently learns the ideal reaction coordinate (the committor) and trains a conditioned Boltzmann Generator to sample from arbitrary bias windows along it. GenAIMMD thereby provides a correlation-free and fully parallelizable path sampling scheme that does not require prior knowledge of the system's transition mechanism. We apply GenAIMMD to a two-dimensional toy model and a higher-dimensional polymer system. In both cases, GenAIMMD succeeds in training the Boltzmann Generator and learning the committor. Benchmark results show a substantial increase in performance compared to standard TPS.

physics.comp-ph↗

Nonadiabatic Forward-Flux Sampling of Rare Molecular Gas-Phase Ammonia Photodissociation

Simulating rare events in photochemistry by brute-force surface hopping is computationally prohibitive: most propagated trajectories either remain nonreactive or follow dominant relaxation channels, while the reaction of interest may occur with very low probability. Path sampling methods have long addressed this problem for ground-state dynamics, but their extension to nonadiabatic processes has so far been limited to low-dimensional analytical models. Here, we demonstrate that our recently developed nonadiabatic forward-flux sampling (NAFFS) method can be applied to efficiently simulate rare-events in full-dimensional molecular systems. As a representative benchmark, we investigate the rare molecular photodissociation channel of gas-phase ammonia, NH$_3$ + h$ν\rightarrow$ NH + H$_2$. NAFFS samples reactive trajectories with the correct statistical weight, reproduces the reaction rate constant obtained in previous brute-force dynamical studies, provides direct access to mechanistic information through an averaged committor analysis, and reduces the simulation time per transition trajectory by up to three orders of magnitude. These results establish NAFFS as an efficient and statistically rigorous framework for investigating rare nonadiabatic processes in realistic molecular systems.

physics.chem-ph↗

Can DFT-trained neural network potentials reproduce structure, solvation, and water-exchange properties in aqueous magnesium solutions?

Magnesium ions play an essential role in many biological processes but remain challenging to model in biomolecular simulations. Despite considerable scientific effort, classical force fields fail to simultaneously reproduce key structural, thermodynamic and kinetic solution properties, likely due to their inability to explicitly account for quantum many-body effects. Here, we develop and systematically benchmark MACE neural network potentials (NNPs) for aqueous MgCl$_2$ solutions trained on revPBE-D3/zd and revPBE0-D3/zd density functional theory reference data and assess their ability to reproduce a broad range of experimental solution properties including the structure of the first hydration shell, diffusion coefficient, activity derivative, water-exchange rate and mechanism as well as solvation free energy. Both NNPs accurately reproduce the octahedral structure of the first hydration shell, ion pairing properties and diffusion coefficients. Combining the NNPs with transition path sampling and other enhanced sampling techniques allows us to capture the rare event of water exchange in the first hydration shell of Mg$^{2+}$ revealing a dissociative exchange mechanism. Transition interface sampling yields exchange rates within one order of magnitude of experiment, representing a substantial improvement over classical dissociative force fields. In contrast, the NNP-derived solvation free energy significantly underestimates the experimental value, revealing a limitation of the present local NNP architectures for describing ion solvation thermodynamics. Our results demonstrate that DFT-trained NNPs can accurately describe Mg$^{2+}$ hydration structure, diffusion, ion pairing, and exchange kinetics, while highlighting the need for explicit long-range electrostatic treatments to achieve quantitative agreement with experimental ion solvation free energies.

physics.chem-ph↗

NATPS: Nonadiabatic Transition Path Sampling Using Time-Reversible MASH Dynamics

Rare nonadiabatic events play a central role in photochemistry but remain difficult to simulate because excited-state dynamics is computationally demanding and often stochastic. Here we introduce a deterministic and time-reversible implementation of nonadiabatic dynamics that enables the application of transition path sampling (TPS) to excited-state processes. Our approach builds on the Mapping Approach to Surface Hopping (MASH) and establishes the conditions required for path ensemble sampling, in particular time reversibility and detailed balance. Combining this dynamics with the TPS framework yields a new method, termed nonadiabatic transition path sampling (NATPS). Using a model system of electronically coupled potential energy surfaces, we demonstrate that NATPS efficiently generates ensembles of reactive trajectories and provides mechanistic insight into nonadiabatic pathways. Compared with brute-force trajectory simulations and forward-flux sampling approaches, NATPS substantially reduces the computational effort required to obtain reactive trajectories.

physics.comp-ph↗

An Always-Accepting Algorithm for Transition Path Sampling

We present a one-way shooting algorithm for transition path sampling that accepts every proposed trajectory, yet samples the correct transition path ensemble for systems with overdamped stochastic dynamics. The method is based on two key elements: a procedure to propose trajectories that are always reactive, and a reweighting scheme that corrects for the bias introduced by always accepting the proposed paths. This approach significantly improves the efficiency of transition path sampling by eliminating the cost associated with generating trajectories that are then rejected. We demonstrate the performances of the algorithm by investigating the formation of CO$_2$ clathrate hydrates along different reaction mechanisms, showing that the increased efficiency allows proper sampling of the formation of crystalline hydrates at temperatures and pressures that are difficult to access with conventional schemes.

physics.comp-ph↗

Non-Markovian dynamics in ice nucleation

In simulation studies of crystallisation, the size of the largest crystalline nucleus is often used as a reaction coordinate to monitor the progress of the nucleation process. Here, we investigate, for the case of homogeneous ice nucleation, whether the nucleus size exhibits Markovian dynamics, as assumed in classical nucleation theory. Using 300 independent nucleation trajectories generated by molecular dynamics, we evaluate the mean recurrence time required to reach selected values of the largest nucleus size. Early recurrences consistently take longer than later ones, revealing a clear history dependence and thus non-Markovian dynamics. To identify the slow modes underlying this behaviour, we analyse several structural descriptors of the nucleus, observing subtle but systematic differences between nuclei at early and late recurrences. By training a neural network on 2,700 short trajectories to learn the committor, we identify relevant collective variables. Based on these features, symbolic regression provides a compact approximation of the committor, i.e., an improved reaction coordinate, which we subsequently test for Markovianity.

cond-mat.soft↗

Comparing the Mechanical and Thermodynamic Definitions of Pressure in Ice Nucleation

Crystal nucleation studies using hard-sphere and Lennard-Jones models have shown that the pressure within the nucleus is lower than that in the surrounding liquid. Here, we use the mechanical route to obtain it for an ice nucleus in supercooled water (TIP4P/Ice) at 1 bar and 247 K. From this (mechanical) pressure, we obtain the interfacial stress using a thermodynamic definition consistent with mechanical arguments. This pressure is compared with that of bulk ice at equal chemical potential (thermodynamic pressure), and the interfacial stress with the interfacial free energy. Furthermore, we investigate these properties on the basal plane. We find that, unlike in hard-sphere and Lennard-Jones systems, mechanical and thermodynamic pressures agree for the nucleus, and the interfacial stress and free energy are comparable. Yet the basal interface displays an interfacial stress nearly twice its interfacial free energy, suggesting that this agreement may be system dependent, underscoring the limitations of mechanical routes to solid-liquid interfacial free energies.

cond-mat.soft↗

Revisiting Shooting Point Monte Carlo Methods for Transition Path Sampling

Rare event sampling algorithms are essential for understanding processes that occur infrequently on the molecular scale, yet they are important for the long-time dynamics of complex molecular systems. One of these algorithms, transition path sampling (TPS), has become a standard technique to study such rare processes since no prior knowledge on the transition region is required. Most TPS methods generate new trajectories from old trajectories by selecting a point along the old trajectory, modifying its momentum in some way, and then ``shooting'' a new trajectory by integrating forward and backward in time. In some procedures, the shooting point is selected independently for each trial move, but in others, the shooting point evolves from one path to the next so that successive shooting points are related to each other. To account for this memory effect, we introduce a theoretical framework based on an extended ensemble that includes both paths and shooting indices. We derive appropriate acceptance rules for various path sampling algorithms in this extended formalism, ensuring the correct sampling of the transition path ensemble. Our framework reveals the need for amended acceptance criteria in the flexible-length aimless shooting and spring shooting methods.

physics.comp-ph↗

Hydrogen Bond Topology Reveals Layering of LDL-like and HDL-like Water at its Liquid/Vapor Interface

The discovery of high-density liquid (HDL) and low-density liquid (LDL) water has been a major success of molecular simulations, yet extending this analysis to interfacial water is challenging due to conventional order parameters assuming local homogeneity. This limitation previously prevented resolving the composition of the surface layer of the liquid/vapour interface. Here, we apply a recently introduced topological order parameter [R. Foffi and F. Sciortino, J. Phys. Chem. B 127, 378-386 (2022)] to analyze the composition of the water/vapor interface across a broad temperature range. Our results reveal that LDL-like water dominates the outermost region at all temperatures, while HDL-like water accumulates beneath it, presenting a clear layering roughly below the temperature of maximum density. This structured stratification, previously inaccessible, highlights the power of the topological order parameter in resolving interfacial molecular heterogeneity and provides new insights into the structural properties of water at interfaces.

cond-mat.soft↗

Iterative charge equilibration for fourth-generation high-dimensional neural network potentials

Machine learning potentials (MLP) allow to perform large-scale molecular dynamics simulations with about the same accuracy as electronic structure calculations provided that the selected model is able to capture the relevant physics of the system. For systems exhibiting long-range charge transfer, fourth-generation MLPs need to be used, which take global information about the system and electrostatic interactions into account. This can be achieved in a charge equilibration (QEq) step, but the direct solution (dQEq) of the set of linear equations results in an unfavorable cubic scaling with system size making this step computationally demanding for large systems. In this work, we propose an alternative approach that is based on the iterative solution of the charge equilibration problem (iQEq) to determine the atomic partial charges. We have implemented the iQEq method, which scales quadratically with system size, in the parallel molecular dynamics software LAMMPS for the example of a fourth-generation high-dimensional neural network potential (4G-HDNNP) intended to be used in combination with the n2p2 library. The method itself is general and applicable to many different types of fourth-generation MLPs. An assessment of the accuracy and the efficiency is presented for a benchmark system of FeCl$_3$ in water.

cond-mat.mtrl-sci↗

Machine learning potentials for redox chemistry in solution

Machine learning potentials (MLPs) represent atomic interactions with quantum mechanical accuracy offering an efficient tool for atomistic simulations in many fields of science. However, most MLPs rely on local atomic energies without information about the global composition of the system. To date, this has prevented the application of MLPs to redox reactions in solution, which involve chemical species in different oxidation states and electron transfer between them. Here, we show that fourth-generation MLPs overcome this limitation and can provide a physically correct description of redox chemical reactions. For the example of ferrous (Fe$^{2+}$) and ferric (Fe$^{3+}$) ions in water we show that the correct oxidation states are obtained matching the number of chloride counter ions irrespective of their positions in the system. Moreover, we demonstrate that our method can describe electron-transfer processes between ferrous and ferric ions, paving the way to simulations of general redox chemistry in solution.

physics.chem-ph↗

Unsupervised identification of crystal defects from atomistic potential descriptors

Identifying crystal defects is vital for unraveling the origins of many physical phenomena. Traditionally used order parameters are system-dependent and can be computationally expensive to calculate for long molecular dynamics simulations. Unsupervised algorithms offer an alternative independent of the studied system and can utilize precalculated atomistic potential descriptors from molecular dynamics simulations. We compare the performance of three such algorithms (PCA, UMAP, and PaCMAP) on silicon and water systems. Initially, we evaluate the algorithms for recognizing phases, including crystal polymorphs and the melt, followed by an extension of our analysis to identify interstitials, vacancies, and interfaces. While PCA is found unsuitable for effective classification, it has been shown to be a suitable initialization for UMAP and PaCMAP. Both UMAP and PaCMAP show promising results overall, with PaCMAP proving more robust in classification, except in cases of significant class imbalance, where UMAP performs better. Notably, both algorithms successfully identify nuclei in supercooled water, demonstrating their applicability to ice nucleation in water.

cond-mat.mtrl-sci↗

Electron-beam-induced adatom-vacancy-complexes in mono- and bilayer phosphorene

Phosphorene, a puckered two-dimensional allotrope of phosphorus, has sparked considerable interest in recent years due to its potential especially for optoelectronic applications with its layer-number-dependant direct band gap and strongly bound excitons. However, detailed experimental characterization of its intrinsic defects as well as its defect creation characteristics under electron irradiation are scarce. Here, we report on the creation and stability of a variety of defect configurations under 60 kV electron irradiation in mono- and bilayer phosphorene including the first experimental reports of stable adatom-vacancy-complexes. Displacement cross section measurements in bilayer phosphorene yield a value of 7.7 +- 1.4 barn with an estimated lifetime of adatom-vacancy-complexes of 19.9 +- 0.7 s, while some are stable for up to 68 s under continuous electron irradiation. Surprisingly, ab initio-based simulations indicate that the complexes should readily recombine, even in structures strained by up to 3 %. The presented results will help to improve the understanding of the wide variety of defects in phosphorene, their creation, and their stability, which may enable new pathways for defect engineered phosphorene devices.

cond-mat.mes-hall↗

Structure and dynamics of the magnetite(001)/water interface from molecular dynamics simulations based on a neural network potential

The magnetite/water interface is commonly found in nature and plays a crucial role in various technological applications. However, our understanding of its structural and dynamical properties at the molecular scale remains still limited. In this study, we develop an efficient Behler-Parrinello neural network potential (NNP) for the magnetite/water system, paying particular attention to the accurate generation of reference data with density functional theory. Using this NNP, we performed extensive molecular dynamics simulations of the magnetite (001) surface across a wide range of water coverages, from the single molecule to bulk water. Our simulations revealed several new ground states of low coverage water on the Subsurface Cation Vacancy (SCV) model and yielded a density profile of water at the surface that exhibits marked layering. By calculating mean square displacements, we obtained quantitative information on the diffusion of water molecules on the SCV for different coverages, revealing significant anisotropy. Additionally, our simulations provided qualitative insights into the dissociation mechanisms of water molecules at the surface.

physics.comp-ph↗

Thermodynamics of alkali feldspar solid solutions with varying Al-Si order: atomistic simulations using a neural network potential

The thermodynamic mixing properties of alkali feldspar solid solutions between the Na and K end members were computed through atomistic simulations using a neural network potential. We performed combined molecular dynamics and Monte Carlo simulations in the semi-grand canonical ensemble at 800 °C and considered three quenched disorder states in the Al-Si-O framework ranging from fully ordered to fully disordered. The excess Gibbs energy of mixing, excess enthalpy of mixing and excess entropy of mixing are in good agreement with literature data. In particular, the notion that increasing disorder in the Al-Si-O framework correlates with increasing ideality of Na-K mixing is successfully predicted. Finally, a recently proposed short range ordering of Na and K in the alkali sublattice is observed, which may be considered as a precursor to exsolution lamellae, a characteristic phenomenon in alkali feldspar of intermediate composition leading to perthite formation during cooling.

cond-mat.mtrl-sci↗

Mechanism and kinetics of sodium diffusion in Na-feldspar from neural network based atomistic simulations

Alkali diffusion is a first-order control for microstructure and compositional evolution of feldspar during cooling from high temperatures of primary magmatic or metamorphic crystallization, and knowledge of the respective diffusion coefficients is crucial for reconstructing thermal histories. Our understanding of alkali diffusion in feldspar is, however, hindered by an insufficient grasp of the underlying diffusion mechanisms. We performed molecular dynamics simulations of sodium feldspar (Albite) containing different point defects using a recently developed neural network potential. A high degree of agreement between the sodium self-diffusion coefficients obtained from model simulations and those determined experimentally in earlier studies motivated a detailed investigation into the interstitial and vacancy mechanisms, corresponding jump rates, correlation factors and anisotropy. We identified a dumbbell shaped double occupancy of an alkali site as an important point defect and a correlation effect originating from the orientation of the dumbbell as a possible cause for the $\perp\!\!(001) > \, \perp\!\!(010)$ diffusion anisotropy, which has been reported in a slew of feldspar cation diffusion experiments.

cond-mat.mtrl-sci↗