Search arXiv⌕ Search

arXiv subjects

Christoph Dellago

Publications and source records attributed to Christoph Dellago.

At least 55 records · Page 3Linked to original sources

Cation interstitial diffusion in lead telluride and cadmium telluride studied by means of neural network potential based molecular dynamics simulations

Using a recently developed approach to represent ab initio based force fields by a neural network potential, we perform molecular dynamics simulations of lead telluride (PbTe) and cadmium telluride (CdTe) crystals. In particular, we study the diffusion of a single cation interstitial in these two systems. Our simulations indicate that the interstitials migrate via two distinct mechanisms: through hops between interstitial sites and through exchanges with lattice atoms. We extract activation energies for both of these mechanisms and show how the temperature dependence of the total diffusion coefficient deviates from Arrhenius behaviour. The accuracy of the neural network approach is estimated by comparing the results for three different independently trained potentials.

physics.comp-ph↗

On the weak scaling of the contact distance between two fluctuating interfaces with system size

A pair of flat parallel surfaces, each freely diffusing along the direction of their separation, will eventually come into contact. If the shapes of these surfaces also fluctuate, then contact will occur when their centers of mass remain separated by a nonzero distance $\ell$. Here we examine the statistics of $\ell$ at the time of first contact for surfaces that evolve in time according to the Edwards-Wilkinson equation. We present a general approach to calculate its probability distribution and determine how its most likely value $\ell^*$ depends on the surfaces' lateral size $L$. We are motivated by an interest in the motion of interfaces between two phases at conditions of thermodynamic coexistence, and in particular the annihilation of domain wall pairs under periodic boundary conditions. Computer simulations of this scenario verify the predicted scaling behavior in two and three dimensions. In the latter case, slow growth where $\ell^\ast$ is an algebraic function of $\log L$ implies that slab-shaped domains remain topologically intact until $\ell$ becomes very small, contradicting expectations from equilibrium thermodynamics.

physics.comp-ph↗

The Origin of Mean-Field Behavior in an Elastic Ising Model

Simple elastic models of spin-crossover compounds are known empirically to exhibit classical critical behavior. We demonstrate how the long-ranged interactions responsible for this behavior arise naturally upon integrating out mechanical fluctuations of such a model. A mean field theory applied to the resulting effective Hamiltonian quantitatively accounts for both thermodynamics and kinetics observed in computer simulations, including a barrier to magnetization reversal that grows extensively with system size. For nanocrystals, which break translational symmetry, a straightforward extension of mean field theory yields similarly accurate results.

cond-mat.stat-mech↗

The Generic Unfolding of a Biomimetic Polymer during Force Spectroscopy

With the help of force spectroscopy, several analytical theories aim at estimating the rate coefficient of folding for various proteins. Nevertheless, a chief bottleneck lies in the fact that there is still no perfect consensus on how does a force generally perturb the crystal-coil transition. Consequently, the goal of our work is in clarifying the generic behavior of most proteins in force spectroscopy; in other words, what general signature does an arbitrary protein exhibit for its rate coefficient as a function of the applied force? By employing a biomimetic polymer in molecular simulations, we focus on evaluating its respective activation energy for unfolding, while pulling on various pairs of its monomers. Above all, we find that in the vicinity of the force-free scenario, this activation energy possesses a negative slope and a negative curvature as a function of the applied force. Our work is in line with the most recent theories for unfolding, which suggest that such a signature is expected for most proteins, and thus, we further reiterate that many of the classical formulae, that estimate the rate coefficient of the crystal-coil transition, are inadequate. Besides, we also present here an analytical expression which experimentalists can use for approximating the activation energy for unfolding; importantly, it is based on measurements for the mean and variance of the distance between the beads which are being pulled. In summary, our work presents an interesting view for protein folding in force spectroscopy.

cond-mat.soft↗

Hierarchical self-assembly of anisotropic colloidal platelets

Anisotropy at the level of the inter-particle interaction provides the particles with specific instructions for the self-assembly of target structures. The ability to synthesize non-spherical colloids, together with the possibility of controlling the particle bonding pattern via suitably placed interaction sites, is nowadays enlarging the playfield for materials design. We consider a model of anisotropic colloidal platelets with regular rhombic shape and two attractive sites placed along adjacent edges and we run Monte Carlo simulations in two-dimensions to investigate the two-stage assembly of these units into clusters with well-defined symmetries and, subsequently, into extended lattices. Our focus is on how the site positioning and site-site attraction strength can be tuned to obtain micellar aggregates that are robust enough to successively undergo to a second-stage assembly from sparse clusters into a stable hexagonal lattice.

cond-mat.soft↗

How patchiness controls the properties of chain-like assemblies of colloidal platelets

Patchy colloidal platelets with convex, non-spherical shapes have been realized with different materials at length scales ranging from nanometers to microns. While the assembly of these hard shapes tends to maximize edge-to-edge contacts, as soon as a directional attraction is added -- by means of, e.g., specific ligands along the particle edges -- a competition between shape and bonding anisotropy sets in, giving rise to a complex assembly scenario. We focus here on a two-dimensional system of patchy rhombi, i.e., colloidal platelets with a regular rhombic shape decorated with bonding sites along their perimeter. Specifically, we consider rhombi with two patches, placed on either opposite or adjacent edges. While for the first particle class only chains can form, for the latter we observe the emergence of either chains or loops, depending on the system parameters. According to the patch positioning -- classified in terms of different classes, topologies and distances from the edge center -- we are able to characterize the emerging chain-like assemblies in terms of length, packing abilities, flexibility properties and nematic ordering.

cond-mat.soft↗

Design of patchy rhombi: from close-packed tilings to open lattices

In the realm of functional materials, the production of two-dimensional structures with tuneable porosity is of paramount relevance for many practical applications: surfaces with regular arrays of pores can be used for selective adsorption or immobilization of guest units that are complementary in shape and/or size to the pores, thus achieving, for instance, selective filtering or well-defined responses to external stimuli. The principles that govern the formation of such structures are valid at both the molecular and the colloidal scale. Here we provide simple design directions to combine the anisotropic shape of the building units -- either molecules or colloids -- and selective directional bonding. Using extensive computer simulations we show that regular rhombic platelets decorated with attractive and repulsive interaction sites lead to specific tilings, going smoothly from close-packed arrangements to open lattices. The rationale behind the rich tiling scenario observed can be described in terms of steric incompatibilities, unsatisfied bonding geometries and interplays between local and long-range order.

cond-mat.soft↗

Consequences of lattice mismatch for phase equilibrium in heterostructured solids

Lattice mismatch can substantially impact the spatial organization of heterogeneous materials. We examine a simple model for lattice-mismatched solids over a broad range of temperature and composition, revealing both uniform and spatially modulated phases. Scenarios for coexistence among them are unconventional due to the extensive mechanical cost of segregation. Together with an adapted Maxwell construction for elastic phase separation, mean field theory predicts a phase diagram that captures key low-temperature features of Monte Carlo simulations.

cond-mat.stat-mech↗

Ab initio thermodynamics of liquid and solid water

Thermodynamic properties of liquid water as well as hexagonal (Ih) and cubic (Ic) ice are predicted based on density functional theory at the hybrid-functional level, rigorously taking into account quantum nuclear motion, anharmonic fluctuations and proton disorder. This is made possible by combining advanced free energy methods and state-of-the-art machine learning techniques. The ab initio description leads to structural properties in excellent agreement with experiments, and reliable estimates of the melting points of light and heavy water. We observe that nuclear quantum effects contribute a crucial 0.2 meV/H$_2$O to the stability of ice Ih, making it more stable than ice Ic. Our computational approach is general and transferable, providing a comprehensive framework for quantitative predictions of ab initio thermodynamic properties using machine learning potentials as an intermediate step.

cond-mat.mtrl-sci↗

Melting Si: beyond density functional theory

The melting point of silicon in the cubic diamond phase is calculated using the random phase approximation (RPA). The RPA includes exact exchange as well as an approximate treatment of local as well as non-local many body correlation effects of the electrons. We predict a melting temperature of about 1735 K and 1640 K without and with core polarization effects, respectively. Both values are within 3 % of the experimental melting temperature of 1687 K. In comparison, the commonly used gradient approximation to density functional theory predicts a melting point that is 200 K too low, and hybrid functionals overestimate the melting point by 150 K. We correlate the predicted melting point with the energy difference between cubic diamond and the beta-tin phase of silicon, establishing that this energy difference is an important benchmark for the development of approximate functionals. The current results establish that the RPA can be used to predict accurate finite temperature properties and underlines the excellent predictive properties of the RPA for condensed matter.

cond-mat.mtrl-sci↗

Theoretical prediction of the homogeneous ice nucleation rate: disentangling thermodynamics and kinetics

Estimating the homogeneous ice nucleation rate from undercooled liquid water is at the same time crucial for understanding many important physical phenomena and technological applications, and challenging for both experiments and theory. From a theoretical point of view, difficulties arise due to the long time scales required, as well as the numerous nucleation pathways involved to form ice nuclei with different stacking disorders. We computed the homogeneous ice nucleation rate at a physically relevant undercooling for a single-site water model, taking into account the diffuse nature of ice-water interfaces, stacking disorders in ice nuclei, and the addition rate of particles to the critical nucleus.We disentangled and investigated the relative importance of all the terms, including interfacial free energy, entropic contributions and the kinetic prefactor, that contribute to the overall nucleation rate.There has been a long-standing discrepancy for the predicted homogeneous ice nucleation rates, and our estimate is faster by 9 orders of magnitude compared with previous literature values. Breaking down the problem into segments and considering each term carefully can help us understand where the discrepancy may come from and how to systematically improve the existing computational methods.

cond-mat.stat-mech↗

Theoretical prediction of thermal polarisation

We present a mean-field theory to explain the thermo-orientation effect in an off-centre Stockmayer fluid. This effect is the underlying cause of thermally induced polarisation and thermally induced monopoles, which have recently been predicted theoretically. Unlike previous theories that are based either on phenomenological equations or on scaling arguments, our approach does not require any fitting parameters. Given an equation of state and assuming local equilibrium, we construct an effective Hamiltonian for the computation of local Boltzmann averages. This simple theoretical treatment predicts molecular orientations that are in very good agreement with simulation results for the range of dipole strengths investigated. By decomposing the overall alignment into contributions from the temperature and density gradients, we shed further light on how the non-equilibrium result arises from the competition between the two gradients.

cond-mat.stat-mech↗

Crystallization and flow in active patch systems

Based upon recent experiments in which Janus particles are made into active swimmers by illuminating them with laser light, we explore the effect of applying a light pattern on the sample, thereby creating activity inducing zones or active patches. We simulate a system of interacting Brownian diffusers that become active swimmers when moving inside an active patch and analyze the structure and dynamics of the ensuing stationary state. We find that, in some respects, the effect of spatially inhomogeneous activity is qualitatively similar to a temperature gradient. For asymmetric patches, however, this analogy breaks down because the ensuing stationary state is specific to partial active motion.

physics.comp-ph↗

Phase Transition and Interpore Correlations of Water in Nanopore Membranes

Using computer simulations, we study a membrane of parallel narrow pores filled with one-dimensional wires of hydrogen-bonded water molecules. We show that such a membrane is equivalent to a system of effective charges located at opposite sides of the membrane offering a computationally efficient way to model correlation effects in water-filled nanopore membranes. Based on our simulations we predict that membranes with square pore lattices undergo a continuous order-disorder transition to an antiferroelectric low-temperature phase in which water wires in adjacent pores are oriented in opposite directions. Strong antiferroelectric correlations exist also in the disordered phase far above the critical temperature or in membranes with geometric frustration, leading to a dielectric constant that is reduced considerably with respect to the case of uncoupled water wires. These correlations are also expected to hinder proton translocation through the membrane.

physics.comp-ph↗

Calibration and temperature measurement of levitated optomechanical sensors

Optically levitated nanoparticles offer enormous potential for precision sensing. However, as for any other metrology device, the absolute measurement performance of a levitated-particle sensor is limited by the accuracy of the calibration relating the measured signal to an absolute displacement of the particle. Here, we suggest and demonstrate calibration protocols for levitated-nanoparticle sensors. Our calibration procedures include the treatment of anharmonicities in the trapping potential, as well as a protocol using a harmonic driving force, which is applicable if the sensor is coupled to a heat bath of unknown temperature. Finally, using the calibration, we determine the center-of-mass temperature of an optically levitated particle in thermal equilibrium from its motion, and discuss the optimal measurement time required to determine said temperature.

physics.optics↗

Interplay of fast and slow dynamics in rare transition pathways: the disk-to-slab transition in the 2d Ising model

Rare transitions between long-lived stable states are often analyzed in terms of free energy landscapes computed as functions of a few collective variables. Here, using transitions between geometric phases as example, we demonstrate that the effective dynamics of a system along these variables are an essential ingredient in the description of rare events and that the static perspective provided by the free energy alone may be misleading. In particular, we investigate the disk-to-slab transition in the two-dimensional Ising model starting with a calculation of a two-dimensional free energy landscape and the distribution of committor probabilities. While at first sight it appears that the committor is incompatible with the free energy, they can be reconciled with each other using a two-dimensional Smoluchowski equation that combines the free energy landscape with state dependent diffusion coefficients. These results illustrate that dynamical information is not only required to calculate rate constants but that neglecting dynamics may also lead to an inaccurate understanding of the mechanism of a given process.

physics.comp-ph↗

Long-range dispersion effects on the water/vapor interface simulated using the most common models

The long-range contribution to dispersion forces is known to have a major impact on the properties of inhomogeneous fluids, and its correct treatment is increasingly recognized as being a necessary requirement to avoid cutoff-related artefacts. Although analytical corrections for quantities like the surface tension are known, these can not take into account the structural changes induced by the long-range contributions. Here, we analyze the interfacial properties of seven popular water models, comparing the results with the cut-off version of the dispersion potential. The differences in surface tension estimates are in all cases found to be less than 2 mN/m.

cond-mat.soft↗

Molecular mechanism for cavitation in water under tension

Despite its relevance in biology and engineering, the molecular mechanism driving cavitation in water remains unknown. Using computer simulations, we investigate the structure and dynamics of vapor bubbles emerging from metastable water at negative pressures. We find that in the early stages of cavitation, bubbles are irregularly shaped and become more spherical as they grow. Nevertheless, the free energy of bubble formation can be perfectly reproduced in the framework of classical nucleation theory (CNT) if the curvature dependence of the surface tension is taken into account. Comparison of the observed bubble dynamics to the predictions of the macroscopic Rayleigh--Plesset (RP) equation, augmented with thermal fluctuations, demonstrates that the growth of nanoscale bubbles is governed by viscous forces. Combining the dynamical prefactor determined from the RP equation with the free energy of CNT yields an analytical expression for the cavitation rate that reproduces the simulation results very well over a wide range of pressures. Furthermore, our theoretical predictions are in excellent agreement with cavitation rates obtained from inclusion experiments. This suggests that homogeneous nucleation is observed in inclusions, whereas only heterogeneous nucleation on impurities or defects occurs in other experiments.

physics.comp-ph↗