arXiv subjects

D. Deb

Publications and source records attributed to D. Deb.

11 recordsLinked to original sources

arXiv2025

Combining the second data release of the European Pulsar Timing Array with low-frequency pulsar data

Low-frequency radio data improve the sensitivity of pulsar timing arrays (PTAs) to propagation effects such as dispersion measure (DM) variations, enabling better noise characterization essential for detecting the stochastic gravitational wave background (GWB). We combined LOFAR (100-200 MHz) and NenuFAR (30-90 MHz) observations with the recent European and Indian PTA release (DR2new+) into a new dataset, DR2low, spanning ~11 years for 12 pulsars. DR2low allows updated noise models, increasing PTA sensitivity to the GWB. Using Libstempo and Enterprise, we applied standard noise models including red noise (RN) and time-variable DM (DMv) as power laws, and performed Bayesian model selection over RN, DMv, and an additional chromatic noise term (CN4). Compared to DR2new+, DR2low improves DM constraints and separates DM and RN contributions. We found that the RN is required in the final model for 10 out of 12 pulsars, compared to only 5 in the DR2new+ dataset. The improved sensitivity to plasma effects provided by DR2low also favors the identification of significant CN4 in eight pulsars, while none showed such evidence in DR2new+. The analysis also reveals unmodelled solar wind effects, particularly near solar conjunction, with residual delays absorbed into the DM component, highlighting the importance of accurately modelling the solar wind in PTA datasets.

astro-ph.HE↗

arXiv2023

Comparing recent PTA results on the nanohertz stochastic gravitational wave background

The Australian, Chinese, European, Indian, and North American pulsar timing array (PTA) collaborations recently reported, at varying levels, evidence for the presence of a nanohertz gravitational wave background (GWB). Given that each PTA made different choices in modeling their data, we perform a comparison of the GWB and individual pulsar noise parameters across the results reported from the PTAs that constitute the International Pulsar Timing Array (IPTA). We show that despite making different modeling choices, there is no significant difference in the GWB parameters that are measured by the different PTAs, agreeing within $1\sigma$. The pulsar noise parameters are also consistent between different PTAs for the majority of the pulsars included in these analyses. We bridge the differences in modeling choices by adopting a standardized noise model for all pulsars and PTAs, finding that under this model there is a reduction in the tension in the pulsar noise parameters. As part of this reanalysis, we "extended" each PTA's data set by adding extra pulsars that were not timed by that PTA. Under these extensions, we find better constraints on the GWB amplitude and a higher signal-to-noise ratio for the Hellings and Downs correlations. These extensions serve as a prelude to the benefits offered by a full combination of data across all pulsars in the IPTA, i.e., the IPTA's Data Release 3, which will involve not just adding in additional pulsars, but also including data from all three PTAs where any given pulsar is timed by more than as single PTA.

astro-ph.HE↗

arXiv2023

The second data release from the European Pulsar Timing Array: IV. Implications for massive black holes, dark matter and the early Universe

The European Pulsar Timing Array (EPTA) and Indian Pulsar Timing Array (InPTA) collaborations have measured a low-frequency common signal in the combination of their second and first data releases respectively, with the correlation properties of a gravitational wave background (GWB). Such signal may have its origin in a number of physical processes including a cosmic population of inspiralling supermassive black hole binaries (SMBHBs); inflation, phase transitions, cosmic strings and tensor mode generation by non-linear evolution of scalar perturbations in the early Universe; oscillations of the Galactic potential in the presence of ultra-light dark matter (ULDM). At the current stage of emerging evidence, it is impossible to discriminate among the different origins. Therefore, in this paper, we consider each process separately, and investigate the implications of the signal under the hypothesis that it is generated by that specific process. We find that the signal is consistent with a cosmic population of inspiralling SMBHBs, and its relatively high amplitude can be used to place constraints on binary merger timescales and the SMBH-host galaxy scaling relations. If this origin is confirmed, this is the first direct evidence that SMBHBs merge in nature, adding an important observational piece to the puzzle of structure formation and galaxy evolution. As for early Universe processes, the measurement would place tight constraints on the cosmic string tension and on the level of turbulence developed by first-order phase transitions. Other processes would require non-standard scenarios, such as a blue-tilted inflationary spectrum or an excess in the primordial spectrum of scalar perturbations at large wavenumbers. Finally, a ULDM origin of the detected signal is disfavoured, which leads to direct constraints on the abundance of ULDM in our Galaxy.

astro-ph.CO↗

arXiv2023

The second data release from the European Pulsar Timing Array II. Customised pulsar noise models for spatially correlated gravitational waves

The nanohertz gravitational wave background (GWB) is expected to be an aggregate signal of an ensemble of gravitational waves emitted predominantly by a large population of coalescing supermassive black hole binaries in the centres of merging galaxies. Pulsar timing arrays, ensembles of extremely stable pulsars, are the most precise experiments capable of detecting this background. However, the subtle imprints that the GWB induces on pulsar timing data are obscured by many sources of noise. These must be carefully characterized to increase the sensitivity to the GWB. In this paper, we present a novel technique to estimate the optimal number of frequency coefficients for modelling achromatic and chromatic noise and perform model selection. We also incorporate a new model to fit for scattering variations in the pulsar timing package temponest and created realistic simulations of the European Pulsar Timing Array (EPTA) datasets that allowed us to test the efficacy of our noise modelling algorithms. We present an in-depth analysis of the noise properties of 25 millisecond pulsars (MSPs) that form the second data release (DR2) of the EPTA and investigate the effect of incorporating low-frequency data from the Indian PTA collaboration. We use enterprise and temponest packages to compare noise models with those reported with the EPTA DR1. We find that, while in some pulsars we can successfully disentangle chromatic from achromatic noise owing to the wider frequency coverage in DR2, in others the noise models evolve in a more complicated way. We also find evidence of long-term scattering variations in PSR J1600$-$3053. Through our simulations, we identify intrinsic biases in our current noise analysis techniques and discuss their effect on GWB searches. The results presented here directly help improve sensitivity to the GWB and are already being used as part of global PTA efforts.

astro-ph.HE↗

arXiv2023

The second data release from the European Pulsar Timing Array III. Search for gravitational wave signals

We present the results of the search for an isotropic stochastic gravitational wave background (GWB) at nanohertz frequencies using the second data release of the European Pulsar Timing Array (EPTA) for 25 millisecond pulsars and a combination with the first data release of the Indian Pulsar Timing Array (InPTA). We analysed (i) the full 24.7-year EPTA data set, (ii) its 10.3-year subset based on modern observing systems, (iii) the combination of the full data set with the first data release of the InPTA for ten commonly timed millisecond pulsars, and (iv) the combination of the 10.3-year subset with the InPTA data. These combinations allowed us to probe the contributions of instrumental noise and interstellar propagation effects. With the full data set, we find marginal evidence for a GWB, with a Bayes factor of four and a false alarm probability of $4\%$. With the 10.3-year subset, we report evidence for a GWB, with a Bayes factor of $60$ and a false alarm probability of about $0.1\%$ ($\gtrsim 3\sigma$ significance). The addition of the InPTA data yields results that are broadly consistent with the EPTA-only data sets, with the benefit of better noise modelling. Analyses were performed with different data processing pipelines to test the consistency of the results from independent software packages. The inferred spectrum from the latest EPTA data from new generation observing systems is rather uncertain and in mild tension with the common signal measured in the full data set. However, if the spectral index is fixed at 13/3, the two data sets give a similar amplitude of ($2.5\pm0.7)\times10^{-15}$ at a reference frequency of $1\,{\rm yr}^{-1}$. By continuing our detection efforts as part of the International Pulsar Timing Array (IPTA), we expect to be able to improve the measurement of spatial correlations and better characterise this signal in the coming years.

astro-ph.HE↗

arXiv2023

The second data release from the European Pulsar Timing Array V. Search for continuous gravitational wave signals

We present the results of a search for continuous gravitational wave signals (CGWs) in the second data release (DR2) of the European Pulsar Timing Array (EPTA) collaboration. The most significant candidate event from this search has a gravitational wave frequency of 4-5 nHz. Such a signal could be generated by a supermassive black hole binary (SMBHB) in the local Universe. We present the results of a follow-up analysis of this candidate using both Bayesian and frequentist methods. The Bayesian analysis gives a Bayes factor of 4 in favor of the presence of the CGW over a common uncorrelated noise process, while the frequentist analysis estimates the p-value of the candidate to be 1%, also assuming the presence of common uncorrelated red noise. However, comparing a model that includes both a CGW and a gravitational wave background (GWB) to a GWB only, the Bayes factor in favour of the CGW model is only 0.7. Therefore, we cannot conclusively determine the origin of the observed feature, but we cannot rule it out as a CGW source. We present results of simulations that demonstrate that data containing a weak gravitational wave background can be misinterpreted as data including a CGW and vice versa, providing two plausible explanations of the EPTA DR2 data. Further investigations combining data from all PTA collaborations will be needed to reveal the true origin of this feature.

astro-ph.HE↗

arXiv2022

Quark stars with 2.6 $M_\odot$ in a non-minimal geometry-matter coupling theory of gravity

This work analyses the hydrostatic equilibrium configurations of strange stars in a non-minimal geometry-matter coupling (GMC) theory of gravity. Those stars are made of strange quark matter, whose distribution is governed by the MIT equation of state. The non-minimal GMC theory is described by the following gravitational action: $f(R,L)=R/2+L+\sigma RL$, where $R$ represents the curvature scalar, $L$ is the matter Lagrangian density, and $\sigma$ is the coupling parameter. When considering this theory, the strange stars become larger and more massive. In particular, when $\sigma=50$ km$^2$, the theory can achieve the 2.6 $M_\odot$, which is suitable for describing the pulsars PSR J2215+5135 and PSR J1614-2230, and the mass of the secondary object in the GW190814 event. The 2.6 $M_\odot$ is a value hardly achievable in General Relativity even considering fast rotation effects, and is also compatible with the mass of PSR J0952-0607 ($M = 2.35 \pm 0.17 ~M_\odot$), the heaviest and fastest pulsar in the disk of the Milky Way, recently measured, supporting the possible existence of strange quark matter in its composition. The non-minimal GMC theory can also give feasible results to describe the macroscopical features of strange star candidates.

gr-qc↗

arXiv2019

Study of the charged super-Chandrasekhar limiting mass white dwarfs in the $f(R,\mathcal{T})$ gravity

The equilibrium configuration of white dwarfs composed of a charged perfect fluid are investigated in the context of the $f(R,\mathcal{T})$ gravity, for which $R$ and $\mathcal{T}$ stand for the Ricci scalar and the trace of the energy-momentum tensor, respectively. By considering the functional form $f(R, \mathcal{T})=R+2\chi \mathcal{T}$, where $\chi$ is the matter-geometry coupling constant, and for a Gaussian ansatz for the electric distribution, some physical properties of charged white dwarfs were derived, namely: mass, radius, charge, electric field, effective pressure and energy density; their dependence on the parameter $\chi$ was also derived. In particular, the $\chi$ value important for the equilibrium configurations of charged white dwarfs has the same scale of $10^{-4}$ of that for non-charged stars and the order of the charge was $10^{20}$C, which is scales with the value of one solar mass, i.e., $\sqrt{G}M_\odot\sim 10^{20}$C. We have also shown that charged white dwarf stars in the context of the $f(R,\mathcal{T})$ have surface electric fields generally below the Schwinger limit of $1.3\times 10^{18}$V/m. In particular, a striking feature of the coupling between the effects of charge and $f(R,\mathcal{T})$ gravity theory is that the modifications in the background gravity increase the stellar radius, which in turn diminishes the surface electric field, thus enhancing stellar stability of charged stars. Most importantly, our study reveals that the present $f(R,T)$ gravity model can suitably explain the super-Chandrasekhar limiting mass white dwarfs, which are supposed to be the reason behind the over-luminous SNeIa and remain mostly unexplained in the background of general relativity (GR).

physics.gen-ph↗

arXiv2018

High performing ionanofluid electrolyte with higher lithium salt concentration for safer lithium metal batteries

A new class of high-performance pyrrolidinium cation based ionanofluid electrolytes with higher lithium salt concentration are developed. The electrolytes are formed by dispersing imidazolium ionic liquid functionalized TiO2 nanoparticles in low conducting, 0.6 M lithium salt doped N-alkyl-N-butylpyrrolidinium bis(trifluoromethylsulfonyl)imide (Pyr14TFSI) ionic liquid (IL) hosted electrolyte. Viscosity, ionic conductivity and thermal properties of these electrolytes are compared with well studied 0.2 M salt doped Pyr14TFSI IL-based electrolyte. The highly crystalline 0.6 M lithium salt dissolved IL-based electrolytes gradually become amorphous with the increasing dispersion of surface functionalized nanoparticles within it. The ionic conductivity of the electrolytes shows unusual viscosity decoupled characteristics and at the 5.0 wt% nanoparticle dispersion it attains a maximum value, higher than that of pure IL host. As compared to pure IL-based electrolytes, the ionanofluid electrolyte also possesses a significantly higher value of lithium ion transference number. The Li/LiMn2O4 cell with the best conducting ionanofluid electrolyte delivers a discharge capacity of about 131 mAh g-1 at 25 degree C at a current density of 24 mA g-1, much higher than that obtained in 0.2 M Li salt dissociated Pyr14TFSI electrolyte (87 mAh g-1). Superior interfacial compatibility between ionanofluid electrolyte and electrodes as indicated by the excellent rate performance with outstanding capacity retention of the cell as compared to pure IL-based analogue, further establish great application potentiality of this optimized newly developed electrolyte for safer LMBs.

physics.app-ph↗

arXiv2011

Modelling of laboratory data of bi-directional reflectance of regolith surface containing Alumina

Bidirectional reflectance of a surface is defined as the ratio of the scattered radiation at the detector to the incident irradiance as a function of geometry. The accurate knowledge of the bidirectional reflection function (BRF) of layers composed of discrete, randomly positioned scattering particles is very essential for many remote sensing, engineering, biophysical applications and in different areas of Astrophysics. The computations of BRF's for plane parallel particulate layers are usually reduced to solve the radiative transfer equation (RTE) by the existing techniques. In this work we present our laboratory data on bidirectional reflectance versus phase angle for two sample sizes of 0.3 and 1 $\mu m$ of Alumina for the He-Ne laser at 632.8 nm (red) and 543.5nm(green) wavelength. The nature of the phase curves of the asteroids depends on the parameters like- particle size, composition, porosity, roughness etc. In our present work we analyse the data which are being generated using single scattering phase function i.e. Mie theory considering particles to be compact sphere. The well known Hapke formula will be considered along with different particle phase function such as Mie and Henyey Greenstein etc to model the laboratory data obtained at the asteroid laboratory of Assam University.

astro-ph.IM↗

arXiv2008

Characteristics of Deterministic and Stochastic Sandpile Models in a Rotational Sandpile Model

Rotational constraint representing a local external bias generally has non-trivial effect on the critical behavior of lattice statistical models in equilibrium critical phenomena. In order to study the effect of rotational bias in a out of equilibrium situation like self-organized criticality, a new two state ``quasi-deterministic'' rotational sandpile model is developed here imposing rotational constraint on the flow of sand grains. An extended set of new critical exponents are found to characterize the avalanche properties at the non-equilibrium steady state of the model. The probability distribution functions are found to obey usual finite size scaling supported by negative time autocorrelation between the toppling waves. The model exhibits characteristics of both deterministic and stochastic sandpile models.

cond-mat.soft↗