Search arXivSearch

arXiv subjects

David Ferrand

Publications and source records attributed to David Ferrand.

13 recordsLinked to original sources

Cathodoluminescence Study of a Quantum Dot in a Nanowire for Single-Photon Emission

Cathodoluminescence in a scanning electron microscope was applied to a semiconductor quantum dot in a nanowire able to emit single photons. We show that cathodoluminescence can be used not only for imaging and spectroscopy, but also to measure the correlation function and characterize the purity of the single-photon emitter. The electron beam can be manipulated to minimize the collection of parasitic luminescence. At cryogenic temperatures, we observed that the thermal budget, as measured via the phonon sidebands, is close to that of non-resonant micro-photoluminescence. This makes cathodoluminescence an efficient tool in the quest of novel single-photon sources.

physics.optics

Calibration-free measurement of the phonon temperature around a single emitter

The emission properties of a localized solid-state emitter are strongly influenced by its environment. The coupling to acoustic phonons impacts the coherence of the emitter and its temperature dependence, and also results in the apparition of phonon sidebands besides the sharp zero-phonon line. Here, we present a method for measuring the absolute temperature of a localized emitter by directly plotting the ratio of the Stokes and anti-Stokes components of the phonon sideband as a function of the shift from the zero-phonon line. This approach requires no calibration and knowledge of the system, making it applicable to a wide range of emitters and materials. We validate the method using a CdSe quantum dot in a ZnSe nanowire. We thus show that the quantum dot is significantly heated under non-resonant excitation when increasing the incident power at low temperature and is ascribed to the drop in thermal conductivity at these temperatures.

physics.optics

Brightness and purity of a room-temperature single-photon source in the blue-green range

Single-photon sources are crucial for developing secure telecommunications. However, most systems operate at cryogenic temperatures. Here, we discuss a promising solid-state system emitting single photons at room temperature in the blue-green range, allowing for quantum communications in free space and underwater. The active element is a core-shell ZnSe tapered nanowire embedding a single CdSe quantum dot grown by molecular beam epitaxy. A patterned substrate enables a thorough study of the one and same nanowire by different methods. Our source exhibits anti-bunching with g(2)(0) < 0.3 near the centre of the photoluminescence line and shows high brightness. This work paves the way for developing single-photon sources operating at non-cryogenic temperatures.

physics.optics

Quantitative analysis of the blue-green single-photon emission from a quantum dot in a thick tapered nanowire

Quantum dots acting as single photon emitters in the blue-green range are fabricated and characterized at cryogenic temperature. They consist in CdSe dots inserted in (Zn,Mg)Se nanowires with a thick shell. Photoluminescence spectra, decay curves and autocorrelation functions were measured under nonresonant continuous-wave and pulsed excitation. An analytical approach is applied simultaneously to the decay curves and correlation functions. It allows a quantitative description of how these two quantities are affected by the exciton rise due to biexciton feeding, the bright exciton decay, the effect of the dark exciton, and the re-excitation between two laser pulses. Linewidths at our limit of resolution (200 $\mu$eV) are recorded. The reported correlation counts vary from a full control by re-excitation from traps, to a small contribution of re-excitation by mobile carriers or other QDs, as low as 5%.

cond-mat.mtrl-sci

Light / heavy hole switching with correlated characterization on a single quantum dot : Probing the light hole / heavy hole switching with correlated magneto-optical spectroscopy and chemical analysis on a single quantum dot

A whole series of complementary studies have been performed on the same, single nanowire containing a quantum dot: cathodoluminescence spectroscopy and imaging, micro-photoluminescence spectroscopy under magnetic field and as a function of temperature, and energy-dispersive X-ray spectrometry and imaging. The ZnTe nanowire was deposited on a Si 3 N 4 membrane with Ti/Al patterns. The complete set of data shows that the CdTe quantum dot features the heavy-hole state as a ground state, although the compressive mismatch strain promotes a light-hole ground state as soon as the aspect ratio is larger than unity (elongated dot). A numerical calculation of the whole structure shows that the transition from the heavy-hole to the light-hole configuration is pushed toward values of the aspect ratio much larger than unity by the presence of a (Zn,Mg)Te shell, and that the effect is further enhanced by a small valence band offset between the semiconductors in the dot and around it.

cond-mat.mes-hall

Nanowire growth and sublimation: CdTe quantum dots in ZnTe nanowires

The role of the sublimation of the compound and of the evaporation of the constituents from the gold nanoparticle during the growth of semiconductor nanowires is exemplified with CdTe-ZnTe heterostructures. Operating close to the upper temperature limit strongly reduces the amount of Cd present in the gold nanoparticle and the density of adatoms on the nanowire sidewalls. As a result, the growth rate is small and strongly temperature dependent, but a good control of the growth conditions allows the incorporation of quantum dots in nanowires with sharp interfaces and adjustable shape, and it minimizes the radial growth and the subsequent formation of additional CdTe clusters on the nanowire sidewalls, as confirmed by photoluminescence. Uncapped CdTe segments dissolve into the gold nanoparticle when interrupting the flux, giving rise to a bulb-like (pendant-droplet) shape attributed to the Kirkendall effect.

cond-mat.mtrl-sci

Light-hole Exciton in Nanowire Quantum Dot

Quantum dots inserted inside semiconductor nanowires are extremely promising candidates as building blocks for solid-state based quantum computation and communication. They provide very high crystalline and optical properties and offer a convenient geometry for electrical contacting. Having a complete determination and full control of their emission properties is one of the key goals of nanoscience researchers. Here we use strain as a tool to create in a single magnetic nanowire quantum dot a light-hole exciton, an optically active quasiparticle formed from a single electron bound to a single light hole. In this frame, we provide a general description of the mixing within the hole quadruplet induced by strain or confinement. A multi-instrumental combination of cathodoluminescence, polarisation-resolved Fourier imaging and magneto-optical spectroscopy, allow us to fully characterize the hole ground state, including its valence band mixing with heavy hole states.

cond-mat.mes-hall

Atomic-like spin noise in solid-state demonstrated with manganese in cadmium telluride

Spin noise spectroscopy is an optical technique which can probe spin resonances non-perturbatively. First applied to atomic vapours, it revealed detailed information about nuclear magnetism and the hyperfine interaction. In solids, this approach has been limited to carriers in semiconductor heterostructures. Here we show that atomic-like spin fluctuations of Mn ions diluted in CdT e (bulk and quantum wells) can be detected through the Kerr rotation associated to excitonic transitions. Zeeman transitions within and between hyperfine multiplets are clearly observed in zero and small magnetic fields and reveal the local symmetry because of crystal field and strain. The linewidths of these resonances are close to the dipolar limit. The sensitivity is high enough to open the way towards the detection of a few spins in systems where the decoherence due to nuclear spins can be suppressed by isotopic enrichment, and towards spin resonance microscopy with important applications in biology and materials science.

cond-mat.mtrl-sci

Strain in crystalline core-shell nanowires

The strain configuration induced by the lattice mismatch in a core-shell nanowire is calculated analytically, taking into account the crystal anisotropy and the difference in stiffness constants of the two materials. The method is applied to nanowires with the wurtzite structure or the zinc-blende structure with the hexagonal / trigonal axis along the nanowire, and the results are compared to available numerical calculations and experimental data. It is also applied to multishell nanowires, and to core-shell nanowires grown along the $<001>$ axis of cubic semiconductors.

cond-mat.mes-hall

Optical properties of single ZnTe nanowires grown at low temperature

Optically active gold-catalyzed ZnTe nanowires have been grown by molecular beam epitaxy, on a ZnTe(111) buffer layer, at low temperature 350\degree under Te rich conditions, and at ultra-low density (from 1 to 5 nanowires per micrometer^{2}. The crystalline structure is zinc blende as identified by transmission electron microscopy. All nanowires are tapered and the majority of them are <111> oriented. Low temperature micro-photoluminescence and cathodoluminescence experiments have been performed on single nanowires. We observe a narrow emission line with a blue-shift of 2 or 3 meV with respect to the exciton energy in bulk ZnTe. This shift is attributed to the strain induced by a 5 nm-thick oxide layer covering the nanowires, and this assumption is supported by a quantitative estimation of the strain in the nanowires.

cond-mat.mtrl-sci

Magnetization dynamics down to zero field in dilute (Cd,Mn)Te quantum wells

The evolution of the magnetization in (Cd,Mn)Te quantum wells after a short pulse of magnetic field was determined from the giant Zeeman shift of spectroscopic lines. The dynamics in absence of magnetic field was found to be up to three orders of magnitude faster than that at 1 T. Hyperfine interaction and strain are mainly responsible for the fast decay. The influence of a hole gas is clearly visible: at zero field anisotropic holes stabilize the system of Mn ions, while in a magnetic field of 1 T they are known to speed up the decay by opening an additional relaxation channel.

cond-mat.mtrl-sci

Magneto-optical spectroscopy of (Ga,Mn)N epilayers

We report on the magneto-optical spectroscopy and cathodoluminescence of a set of wurtzite (Ga,Mn)N epilayers with a low Mn content, grown by molecular beam epitaxy. The sharpness of the absorption lines associated to the Mn$^{3+}$ internal transitions allows a precise study of its Zeeman effect in both Faraday and Voigt configurations. We obtain a good agreement if we assume a dynamical Jahn-Teller effect in the 3d$^{4}$ configuration of Mn, and we determine the parameters of the effective Hamiltonians describing the $^{5}T\_{2}$ and $^{5}E$ levels, and those of the spin Hamiltonian in the ground spin multiplet, from which the magnetization of the isolated ion can be calculated. On layers grown on transparent substrates, transmission close to the band gap, and the associated magnetic circular dichroism, reveal the presence of the giant Zeeman effect resulting from exchange interactions between the Mn$^{3+}$ ions and the carriers. The spin-hole interaction is found to be ferromagnetic.

cond-mat.mtrl-sci

Hall effect and magnetoresistance in p-type ferromagnetic semiconductors

Recent works aiming at understanding magnetotransport phenomena in ferromagnetic III-V and II-VI semiconductors are described. Theory of the anomalous Hall effect in p-type magnetic semiconductors is discussed, and the relative role of side-jump and skew-scattering mechanisms assessed for (Ga,Mn)As and (Zn,Mn)Te. It is emphasized that magnetotransport studies of ferromagnetic semiconductors in high magnetic fields make it possible to separate the contributions of the ordinary and anomalous Hall effects, to evaluate the role of the spins in carrier scattering and localization as well as to determine the participation ratio of the ferromagnetic phase near the metal-insulator transition. A sizable negative magnetoresistance in the regime of strong magnetic fields is assigned to the weak localization effect.

cond-mat.mtrl-sci