Search arXivSearch

arXiv subjects

David Schwartz

Publications and source records attributed to David Schwartz.

4 recordsLinked to original sources

SmallSatSim: A GPU-Accelerated Microgravity Robotics Toolkit for Planning, Control, and Policy Learning

Microgravity rendezvous and close proximity operations (RPO) is a growing area of interest for applications spanning in-space assembly and manufacturing (ISAM), orbital debris remediation, and small body exploration. Developing autonomy for these operations requires integrating dynamics simulation with task definition, control and learning algorithms, robustness testing, and evaluation. We present \texttt{SmallSatSim}, an open-source toolkit for developing autonomy algorithms for robots operating in microgravity environments. Built on MuJoCo, \texttt{SmallSatSim} provides a common experiment and task abstraction for spacecraft models, planners, controllers and policies, actuator effects, disturbances, and evaluation, allowing model-based and learning-based approaches to operate on the same problem definitions. The framework combines conventional MuJoCo execution for model-based control with vectorized JAX/MJX execution for massively parallel policy learning. We demonstrate \texttt{SmallSatSim} through Monte Carlo experiments on model-based control under actuator perturbations, five-seed PPO and SAC training under nominal and randomized dynamics with out-of-distribution evaluation, contact-rich rendezvous and docking, and GPU scaling experiments.

cs.RO

Architecting Autonomy for Safe Microgravity Free-Flyer Inspection

Small free-flying spacecraft can provide vital extravehicular activity (EVA) services like inspection and repair for future orbital outposts like the Lunar Gateway. Operating adjacent to delicate space station and microgravity targets, these spacecraft require formalization to describe the autonomy that a free-flyer inspection mission must provide. This work explores the transformation of general mission requirements for this class of free-flyer into a set of concrete decisions for the planning and control autonomy architectures that will power such missions. Flowing down from operator commands for inspection of important regions and mission time-criticality, a motion planning problem emerges that provides the basis for developing autonomy solutions. Unique constraints are considered such as velocity limitations, pointing, and keep-in/keep-out zones, with mission fallback techniques for providing hierarchical safety guarantees under model uncertainties and failure. Planning considerations such as cost function design and path vs. trajectory control are discussed. The typical inputs and outputs of the planning and control autonomy stack of such a mission are also provided. Notional system requirements such as solve times and propellant use are documented to inform planning and control design. The entire proposed autonomy framework for free-flyer inspection is realized in the SmallSatSim simulation environment, providing a reference example of free-flyer inspection autonomy. The proposed autonomy architecture serves as a blueprint for future implementations of small satellite autonomous inspection in proximity to mission-critical hardware, going beyond the existing literature in terms of both (1) providing realistic system requirements for an autonomous inspection mission and (2) translating these requirements into autonomy design decisions for inspection planning and control.

cs.RO

Nonlinear Moving Horizon Estimation and Model Predictive Control for Buildings with Unknown HVAC Dynamics

We present a solution for modeling and online identification for heating, ventilation, and air conditioning (HVAC) control in buildings. Our approach comprises: (a) a resistance-capacitance (RC) model based on first order energy balance for deriving the zone temperature dynamics, and (b) a neural network for modeling HVAC dynamics. State estimation and model identification are simultaneously performed using nonlinear moving horizon estimation (MHE) with physical constraints for system states. We leverage the identified model in model predictive control (MPC) for occupant comfort satisfaction and HVAC energy savings and verify the approach using simulations. Our system relies only on building management system data, does not require extensive data storage, and does not require a detailed building model. This can significantly aid the large scale adoption of MPC for future occupant-centric control of grid-interactive buildings.

eess.SY

Advanced dispersion engineering of a III-Nitride micro-resonator for a blue/UV frequency comb

A systematic dispersion engineering approach is presented toward designing a III-Nitride micro-resonator for a blue/UV frequency comb. The motivation for this endeavor is to fill the need for compact, coherent, multi-wavelength photon sources that can be paired with, e.g., the $^{171}{\textrm{Yb}}^{+}$ ion in a photonic integrated chip for optical sensing, time-keeping, and quantum computing applications. The challenge is to overcome the normal material dispersion exhibited by the otherwise ideal i.e., low-loss and large-Kerr-coefficient) AlGaN family of materials, as this is a prerequisite for bright-soliton Kerr comb generation. The proposed approach exploits the avoided-crossing phenomenon in coupled waveguides to achieve strong anomalous dispersion in a desired wavelength range. The resulting designs reveal a wide range of dispersion response tunability, and are realizable with the current state-of-the-art growth and fabrication methods for AlGaN semiconductors. Numerical simulations of the spatio-temporal evolution of the intra-cavity field under continuous-wave laser pumping indicate that such a structure is capable of generating a broadband blue/UV bright-soliton Kerr frequency comb.

physics.optics