Search arXiv⌕ Search

arXiv subjects

Eli De Poorter

Publications and source records attributed to Eli De Poorter.

At least 19 recordsLinked to original sources

Scalable BLE Channel Sounding Localization with Ranging-Assisted PDoA

Bluetooth Channel Sounding (CS) enables accurate phase-based ranging, but multi-anchor localization requires sequential ranging exchanges that limit scalability and increase measurement latency. This paper proposes Ranging-Assisted Phase Difference of Arrival (RA-PDoA), a scalable BLE localization architecture combining one active anchor performing a standard two-way CS exchange with multiple passive receive-only anchors observing the same transmissions. A channel-recovery framework is derived that enables passive anchors to reconstruct a channel response suitable for super-resolution delay estimation, allowing multipath-robust ranging without participating in a two-way exchange. Coarse arrival-time information is further used to bound the position estimate and reject inconsistent range solutions. A comprehensive evaluation characterizes the impact of multipath propagation, body shadowing, synchronization requirements, oscillator impairments, anchor placement, and deployment inaccuracies, thereby quantifying the practical infrastructure requirements for scalable BLE localization. Simulation results in modeled indoor environments show that RA-PDoA reduces the 90th-percentile localization error from 175.3 cm to 95.5 cm under body shadowing while maintaining an airtime requirement independent of the number of anchors. The results demonstrate that a single active ranging link enables scalable and multipath-robust BLE Channel Sounding localization.

eess.SP↗

RFShape: An IQ-Pretrained Wireless Foundation Model for Heterogeneous IQ & CIR Representations

In wireless systems, foundation models have been proposed as alternative artificial intelligence models to replace task-specific models with a shared pretrained model that can be reused across many downstream applications (source separation, interference detection, localization, etc.). These wireless foundation models promise to reuse learned representations across diverse tasks, but choosing a foundation model also means choosing its input representation. For example, a model pretrained on spectrograms expects spectrograms, while one pretrained on in-phase/quadrature (IQ) samples expects IQ, limiting which pretrained model can be used for a given downstream problem. To remedy this, we present RFShape, a 7.4 M-parameter foundation model that breaks this coupling by adapting how a signal is presented to a shared pretrained encoder. RFShape is pretrained solely on synthetic IQ waveforms, without real captures, labels, or channel impulse responses (CIRs), and uses deterministic representation operators to support heterogeneous downstream inputs. Across ten tasks and nine datasets unseen during pretraining, the same encoder supports classification, ranging-error regression, and two-dimensional positioning. Representation selection alone increases 23-class radar recognition from 23.0% to 69.5% and short-range technology recognition from 70.8% to 97.1%. RFShape also outperforms CIR-pretrained ultra-wideband baselines by up to 12.7 percentage points for (N)LOS classification despite never observing CIRs during pretraining. These results show that foundation-model reuse need not be limited by the representation or modality seen during pretraining, and adapting how a signal is presented can extend a single pretrained encoder across heterogeneous wireless tasks.

eess.SP↗

Analytical Modeling of Latency and Energy Trade-offs in FiRa-Like BLE-UWB Ranging and Localization Systems

Accurate position and distance information provided by Ultra-Wideband (UWB) can enhance a wide range of applications. However, its receive-mode power consumption makes continuous channel monitoring impractical for energy-constrained devices. Consequently, UWB systems often rely on Bluetooth Low Energy (BLE) to discover peers and establish sessions before ranging begins. Although both technologies have been studied in isolation, an framework capturing the latency and energy consumption of the complete workflow is still lacking. To address this gap, we develop a unified analytical model for BLE-assisted UWB systems, from device-to-device ranging to infrastructure-based localization. The model includes closed-form expressions for discovery, parameter exchange, and ranging, and evaluates the resulting latency and energy consumption. Evaluation of three representative BLE configurations shows that the scanner consumes 28-57x more energy per discovery than the advertiser. In addition, the 99th-percentile discovery latency is 2-3.4x higher than the mean and reaches up to 110 s in the lowest-power configuration. The one-time BLE setup overhead is amortized after 24-562 ranging rounds, depending on the discovery configuration. Overall, the analysis demonstrates that the BLE discovery phase can dominate both the latency and the energy budget during short UWB interactions, making discovery configuration as important as the ranging scheme.

cs.NI↗

Entropy-Based Wireless Technology Recognition

Wireless Technology Recognition (WTR) enables identifying wireless technologies from received radio signals and is important for spectrum monitoring and management systems. Existing approaches either rely on handcrafted signal features with limited robustness or computationally intensive Deep Learning (DL) models operating on high-dimensional In-phase and Quadrature (IQ) samples or spectrograms. In this paper, we investigate a different hypothesis: wireless technologies can be distinguished through the temporal evolution of their local time-frequency complexity. To capture this behavior, we propose a lightweight WTR framework based on two-dimensional dispersion entropy. Entropy values are extracted from successive spectrogram regions to characterize the evolution of local spectrogram complexity throughout a transmission and summarized into a compact feature representation for classification using a Multilayer Perceptron (MLP). The framework is evaluated on seven wireless technologies, namely IEEE 802.11ah, IEEE 802.15.4 SUN-FSK, IEEE 802.15.4 SUN-OFDM, LoRa, IEEE 802.11n, LTE, and 5G NR, at Signal-to-Noise Ratios (SNRs) ranging from -20 dB to 40 dB. Experimental results show that the proposed approach consistently outperforms IQ-based and Short-Time Fourier Transform (STFT)-based Convolutional Neural Network (CNN) baselines, particularly at low and moderate SNRs. Averaged across all evaluated SNR levels, it achieves 82.73% accuracy, corresponding to improvements of 23.8% and 14.6% over the IQ-based and STFT-based CNN approaches, respectively. Furthermore, the approach maintains its recognition advantage with data-augmented training while requiring substantially shorter training times. The results demonstrate that temporal evolution of local spectrogram complexity provides a robust technology-specific fingerprint and an effective, computationally efficient representation for WTR.

eess.SP↗

Agentic RF Intelligence: Multi-Timescale 6G Sensing and Reasoning with On-Device Foundation Models

Future 6G systems share a central challenge with Physical AI: combining sensing, reasoning, and action on network-edge infrastructure in rapidly changing physical environments under strict latency, compute, and energy constraints. Addressing this challenge requires multi-timescale intelligence, combining fast perception that tracks wireless phenomena within milliseconds with slower reasoning that directs sensing and adapts network policies and resources over seconds. In this paper, we present a vision for Agentic RF Intelligence based on a dual-loop architecture that decouples fast, locally autonomous wireless sensing (e.g., detecting spectrum dynamics, interference, and signal sources) from slower agentic reasoning and orchestration. We provide an on-device prototype in which the full stack runs on a single NVIDIA Jetson Thor connected to a B200 Mini USRP. The fast loop processes IQ samples using signal-processing tools and wireless physical-layer foundation models (WPFM), while a local Large Language Model (LLM) asynchronously interprets RF events, invokes tools and steers sensing. Our experiments confirm the separation in timescales, as WPFMs operate at millisecond latency, while LLM interactions take seconds to minutes. The fast loop remains operational during agentic reasoning, providing initial evidence for the feasibility of this decoupled architecture. We conclude by outlining extensions toward memory-driven self-improvement, world models, network control, and multi-agent operation.

eess.SP↗

A comparison between ceiling-mounted FMCW, IR-UWB and Wi-Fi radar for in-bedroom human activity monitoring and sleep interruption detection

Despite their growing importance for contact-free radio frequency (RF) based healthcare monitoring, different radio technologies such as frequency-modulated continuous wave (FMCW) radar, impulse radio ultra-wideband (IR-UWB), and Wi-Fi sensing are rarely compared under identical deployment conditions, as existing studies typically differ in hardware, datasets, and evaluation methodologies. In addition, the performance of ceiling-mounted radars, despite their practical deployment and cost advantages in healthcare environments, remain underexplored. Therefore, this paper presents a controlled comparison and analysis of ceiling-mounted FMCW, IR-UWB, and Wi-Fi sensing using synchronized recordings from 20 participants across six room layouts. All technologies are evaluated with the same convolutional neural network (CNN) on both a fine-grained 10-class human activity recognition (HAR) task and a coarse 4-class sleep monitoring task. IR-UWB achieves the highest cross-subject activity recognition performance (89.0% macro F1), while FMCW generalizes best to unseen room layouts (83.8% macro F1). For sleep monitoring, all technologies exceed 92% macro F1 in unseen environments. The results reveal a fundamental trade-off between recognition performance and environmental robustness, which can be explained through differences in range resolution, antenna diversity, Doppler resolution, and spatial information retention. These findings provide practical guidelines for the design of healthcare-oriented RF sensing systems.

cs.LG↗

Wireless Physical-Layer Foundation Models: Architectures, Learning Paradigms, Applications, and Deployment

Foundation models, i.e., large neural networks pretrained on broad unlabeled data and adapted to many downstream tasks, have reshaped natural language processing and computer vision and are now being explored for the wireless physical layer. Wireless Physical-Layer Foundation Models (WPFMs) aim to learn transferable representations of signals such as channel state information (CSI), in-phase and quadrature (IQ) samples, and spectrograms so that a single pretrained backbone can support tasks ranging from channel estimation and prediction to localization and sensing while using limited task-specific data. This paper provides a dedicated review of WPFMs from learning design to practical deployment. We first establish the theoretical background, covering the neural architectures used for wireless signals, the self-supervised pretraining paradigms of masked modeling, contrastive learning, and generative pretraining, and the fine-tuning strategies that adapt pretrained models to downstream tasks. We then introduce a taxonomy that organizes existing models along five dimensions: architecture family, input modality and tokenization, pretraining objective, model scale and deployment target, and generalization capability. Building on this basis, we review applications across telecommunications, localization, and sensing, and, for each domain, analyze deployment feasibility by mapping model size to the memory, compute, and latency budgets of representative wireless hardware. Finally, we discuss model compression and efficient deployment, summarize the cross-cutting challenges, and outline open research directions. Our goal is to provide a reference that connects pretraining, architecture, and fine-tuning with the practical constraints of wireless systems.

eess.SP↗

Low-cost Embedded Breathing Rate Determination Using 802.15.4z IR-UWB Hardware for Remote Healthcare

Respiratory diseases account for a significant portion of global mortality. Affordable and early detection is an effective way of addressing these ailments. To this end, a low-cost commercial off-the-shelf (COTS), IEEE 802.15.4z standard compliant impulse-radio ultra-wideband (IR-UWB) radar system is used to estimate human respiration rates. We propose a convolutional neural network (CNN) specifically adapted to predict breathing rates from ultra-wideband (UWB) channel impulse response (CIR) data, and compare its performance with both other rule-based algorithms and model-based solutions. The study uses a diverse dataset, incorporating various real-life environments to evaluate system robustness. To facilitate future research, this dataset will be released as open source. Results show that the CNN achieves a mean absolute error (MAE) of 1.73 breaths per minute (BPM) in unseen situations, significantly outperforming rule-based methods (3.40 BPM). By incorporating calibration data from other individuals in the unseen situations, the error is further reduced to 0.84 BPM. In addition, this work evaluates the feasibility of running the pipeline on a low-cost embedded device. Applying 8-bit quantization to both the weights and input/output tensors, reduces memory requirements by 67% and inference time by 62% with only a 3% increase in MAE. As a result, we show it is feasible to deploy the algorithm on an nRF52840 system-on-chip (SoC) requiring only 46 KB of memory and operating with an inference time of only 199 ms. Once deployed, an analytical energy model estimates that the system, while continuously monitoring the room, can operate for up to 268.2 days without recharging when powered by a 20 000 mAh battery pack. For breathing monitoring in bed, the sampling rate can be lowered, extending battery life to 313.8 days, making the solution highly efficient for real-world, low-cost deployments.

eess.SP↗

Tracking the Turn: Mamba-Powered Human Orientation Detection using UWB

User orientation is crucial for many context-aware applications, including interactive museum experiences, smart door access, and intuitive human-environment interaction. However, most existing indoor localization systems focus on estimating position, while body orientation is typically assigned to secondary devices such as inertial measurement units. In this paper, we propose a purely UWB-based approach that predicts yaw orientation directly from UWB Channel Impulse Response (CIR) measurements recorded at fixed anchors as they receive transmissions from a single wearable tag. We use a bidirectional Mamba architecture that captures dependencies across the anchor observations through forward and backward recurrent scans. The model uses per-anchor CIR and a body-part conditioning module to adapt the representation to different tag placements on the body. Two different Kalman filters are used as post-processing stages to exploit temporal continuity: an orientation-based filter that smooths the neural network predictions, and a location-based filter that additionally incorporates position-derived heading corrections. We evaluated the model's performance in different scenarios to ensure generalizability. The proposed Mamba model achieves a mean absolute error of 38.6 degrees in its raw form, outperforming a rule-based baseline of 49.5 degrees. With the location-based Kalman filter, the error is further reduced to 18.9 degrees, corresponding to a 51% reduction.

eess.SP↗

Toward Autonomous O-RAN: A Multi-Scale Agentic AI Framework for Real-Time Network Control and Management

Open Radio Access Networks (O-RAN) promise flexible 6G network access through disaggregated, software-driven components and open interfaces, but this programmability also increases operational complexity. Multiple control loops coexist across the service management layer and RAN Intelligent Controller (RIC), while independently developed control applications can interact in unintended ways. In parallel, recent advances in generative Artificial Intelligence (AI) are enabling a shift from isolated AI models toward agentic AI systems that can interpret goals, coordinate multiple models and control functions, and adapt their behavior over time. This article proposes a multi-scale agentic AI framework for O-RAN that organizes RAN intelligence as a coordinated hierarchy across the Non-Real-Time (Non-RT), Near-Real-Time (Near-RT), and Real-Time (RT) control loops: (i) A Large Language Model (LLM) agent in the Non-RT RIC translates operator intent into policies and governs model lifecycles. (ii) Small Language Model (SLM) agents in the Near-RT RIC execute low-latency optimization and can activate, tune, or disable existing control applications; and (iii) Wireless Physical-layer Foundation Model (WPFM) agents near the distributed unit provide fast inference close to the air interface. We describe how these agents cooperate through standardized O-RAN interfaces and telemetry. Using a proof-of-concept implementation built on open-source models, software, and datasets, we demonstrate the proposed agentic approach in two representative scenarios: robust operation under non-stationary conditions and intent-driven slice resource control.

cs.NI↗

Towards mm-Level Accurate UWB Radar: High-Accuracy Phase-Based Obstacle Detection through Multi-Channel Fusion

Accurate, tag-free distance estimation with ultrawideband (UWB) radar is essential for applications such as autonomous guided vehicles, robotics, and environment characterization. For tag-based localization systems, phase-based UWB signal processing techniques have demonstrated sub-wavelength ranging precision, but these approaches are not applicable for passive (tagless) radar setups with weak reflections, mixed multipath conditions, and the absence of a known time-of-flight (ToF) first-path reference. This paper demonstrates for the first time that phase information can be effectively exploited in a fully passive UWB radar setting. We introduce a signal processing framework that extracts reliable distance information by combining coarse amplitude-based estimates with high-resolution phase changes across multiple frequency channels. By referencing phase measurements with the line-of-sight component, the method compensates for hardware-induced phase drift, while the use of multichannel frequency diversity enables disambiguation of periodic phase information and improves robustness against frequencyspecific channel degradation such as Fresnel zones. The proposed approach is validated on a robot equipped with a bistatic UWB radar using DW3000 devices and evaluated in a realistic metallic industrial environment. Experimental results show that our work consistently achieves centimeter-level accuracy even at high speeds, with a median error of 1.69 cm, significantly outperforming existing ~10cm accuracy UWB radar approaches relying only on amplitude-information. We further show how multi-channel fusion exploits uncorrelated channel degradation to reduce the error by more than 40% compared to single-channel operation, and outline how phase modeling and fusion can be pushed toward sub-centimeter accuracy.

eess.SP↗

Integration of UWB Radar on Mobile Robots for Continuous Obstacle and Environment Mapping

This paper presents an infrastructure-free approach for obstacle detection and environmental mapping using ultra-wideband (UWB) radar mounted on a mobile robotic platform. Traditional sensing modalities such as visual cameras and Light Detection and Ranging (LiDAR) fail in environments with poor visibility due to darkness, smoke, or reflective surfaces. In these vision-impaired conditions, UWB radar offers a promising alternative. To this end, this work explores the suitability of robot-mounted UWB radar for environmental mapping in anchor-free, unknown scenarios. The study investigates how different materials (metal, concrete and plywood) and UWB radio channels (5 and 9) influence the Channel Impulse Response (CIR). Furthermore, a processing pipeline is proposed to achieve reliable mapping of detected obstacles, consisting of 3 steps: 1) target identification (based on CIR peak detection); 2) filtering (based on peak properties, signal-to-noise score, and phase-difference of arrival); and 3) clustering (based on distance estimation and angle-of-arrival estimation). The proposed approach successfully reduces noise and multipath effects, achieving high obstacle detection performance across a range of materials. Even in challenging low-reflectivity scenarios such as concrete, the method achieves a precision of 73.42% and a recall of 83.38% on channel 9. This work offers a foundation for further development of UWB-based localisation and mapping (SLAM) systems that do not rely on visual features and, unlike conventional UWB localisation systems, do not require fixed anchor nodes for triangulation.

cs.RO↗

Reasoning Meets Representation: Envisioning Neuro-Symbolic Wireless Foundation Models

Recent advances in Wireless Physical Layer Foundation Models (WPFMs) promise a new paradigm of universal Radio Frequency (RF) representations. However, these models inherit critical limitations found in deep learning such as the lack of explainability, robustness, adaptability, and verifiable compliance with physical and regulatory constraints. In addition, the vision for an AI-native 6G network demands a level of intelligence that is deeply embedded into the systems and is trustworthy. In this vision paper, we argue that the neuro-symbolic paradigm, which integrates data-driven neural networks with rule- and logic-based symbolic reasoning, is essential for bridging this gap. We envision a novel Neuro-Symbolic framework that integrates universal RF embeddings with symbolic knowledge graphs and differentiable logic layers. This hybrid approach enables models to learn from large datasets while reasoning over explicit domain knowledge, enabling trustworthy, generalizable, and efficient wireless AI that can meet the demands of future networks.

eess.SP↗

Towards a Wireless Physical-Layer Foundation Model: Challenges and Strategies

Artificial intelligence (AI) plays an important role in the dynamic landscape of wireless communications, solving challenges unattainable by traditional approaches. This paper discusses the evolution of wireless AI, emphasizing the transition from isolated task-specific models to more generalizable and adaptable AI models inspired by recent successes in large language models (LLMs) and computer vision. To overcome task-specific AI strategies in wireless networks, we propose a unified wireless physical-layer foundation model (WPFM). Challenges include the design of effective pre-training tasks, support for embedding heterogeneous time series and human-understandable interaction. The paper presents a strategic framework, focusing on embedding wireless time series, self-supervised pre-training, and semantic representation learning. The proposed WPFM aims to understand and describe diverse wireless signals, allowing human interactivity with wireless networks. The paper concludes by outlining next research steps for WPFMs, including the integration with LLMs.

cs.NI↗

Lightweight Foundation Model for Wireless Time Series Downstream Tasks on Edge Devices

While machine learning is widely used to optimize wireless networks, training a separate model for each task in communication and localization is becoming increasingly unsustainable due to the significant costs associated with training and deployment. Foundation models offer a more scalable alternative by enabling a single model to be adapted across multiple tasks through fine-tuning with limited samples. However, current foundation models mostly rely on large-scale Transformer architectures, resulting in computationally intensive models unsuitable for deployment on typical edge devices. This paper presents a lightweight foundation model based on simple Multi-Layer-Perceptron (MLP) encoders that independently process input patches. Our model supports 4 types of downstream tasks (long-range technology recognition, short-range technology recognition, modulation recognition and line-of-sight-detection) from multiple input types (IQ and CIR) and different sampling rates. We show that, unlike Transformers, which can exhibit performance drops as downstream tasks are added, our MLP model maintains robust generalization performance, achieving over 97% accurate fine-tuning results for previously unseen data classes. These results are achieved despite having only 21K trainable parameters, allowing an inference time of 0.33 ms on common edge devices, making the model suitable for constrained real-time deployments.

eess.SP↗

A Unified Foundation Model for Wireless Technology Recognition and Localization

Wireless Technology Recognition (WTR) and localization are essential in modern communication systems, enabling efficient spectrum management, seamless coexistence of diverse technologies, and accurate positioning in dynamic environments. In real-world conditions, solutions must handle signals from various resources with different sampling rates, capturing devices, frequency bands, and propagation conditions. Traditional methods, such as energy detection and conventional Deep Learning (DL) models like Convolutional Neural Networks (CNNs), often lack the robustness to generalize across unseen technologies, environments, or tasks. In this work, we introduce a Transformer-based foundation model for both WTR and localization, pre-trained in a self-supervised manner on large-scale, unlabeled datasets of In-phase and Quadrature (IQ) and Channel Impulse Response (CIR) timeseries. The model leverages input patching for computational efficiency and employs a two-stage pipeline: self-supervised pre-training to learn general-purpose representations, followed by lightweight fine-tuning for task-specific adaptation. This enables the model to generalize to new wireless technologies and unseen environments using minimal labeled samples. Evaluations across short-range and long-range datasets show superior accuracy in WTR (up to 99.99%), Line-Of-Sight (LOS) detection (up to 100%), and ranging error correction (reducing Mean Absolute Error (MAE) by up to 50%), all while maintaining low computational complexity. These results underscore the potential of a reusable wireless foundation model for multi-task applications with minimal retraining.

eess.SP↗

UWB TDoA Error Correction using Transformers: Patching and Positional Encoding Strategies

Despite their high accuracy, UWB-based localization systems suffer inaccuracies when deployed in industrial locations with many obstacles due to multipath effects and non-line-of-sight (NLOS) conditions. In such environments, current error mitigation approaches for time difference of arrival (TDoA) localization typically exclude NLOS links. However, this exclusion approach leads to geometric dilution of precision problems and this approach is infeasible when the majority of links are NLOS. To address these limitations, we propose a transformer-based TDoA position correction method that uses raw channel impulse responses (CIRs) from all available anchor nodes to compute position corrections. We introduce different CIR ordering, patching and positional encoding strategies for the transformer, and analyze each proposed technique's scalability and performance gains. Based on experiments on real-world UWB measurements, our approach can provide accuracies of up to 0.39 m in a complex environment consisting of (almost) only NLOS signals, which is an improvement of 73.6 % compared to the TDoA baseline.

eess.SP↗

A Comprehensive Overview on UWB Radar: Applications, Standards, Signal Processing Techniques, Datasets, Radio Chips, Trends and Future Research Directions

Due to their large bandwidth, relatively low cost, and robust performance, UWB radio chips can be used for a wide variety of applications, including localization, communication, and radar. This article offers an exhaustive survey of recent progress in UWB radar technology. The goal of this survey is to provide a comprehensive view of the technical fundamentals and emerging trends in UWB radar. Our analysis is categorized into multiple parts. Firstly, we explore the fundamental concepts of UWB radar technology from a technology and standardization point of view. Secondly, we examine the most relevant UWB applications and use cases, such as device-free localization, activity recognition, presence detection, and vital sign monitoring, discussing each time the bandwidth requirements, processing techniques, algorithms, latest developments, relevant example papers, and trends. Next, we steer readers toward relevant datasets and available radio chipsets. Finally, we discuss ongoing challenges and potential future research avenues. As such, this overview paper is designed to be a cornerstone reference for researchers charting the course of UWB radar technology over the last decade.

eess.SP↗