arXiv subjects

Emma Batson

Publications and source records attributed to Emma Batson.

8 recordsLinked to original sources

arXiv2026

Ultrafast dynamics and light-induced superconductivity from first principles

Experiments on superconducting materials have unveiled unique emergent properties when they are driven far from equilibrium. However, a quantitative first-principles treatment that describes experimental observations is lacking. In this work, we develop an ab-initio model for the nonequilibrium response of optically irradiated superconducting films within the framework of conventional electron-phonon-mediated superconductivity, leveraging new numerical techniques to solve the Migdal-Eliashberg equations directly on the real-frequency axis. This enables us to quantitatively reproduce the optical response of superconducting films in pump-probe experiments and validate our approach on measurements of the differential reflectance of Pb and LaH$_{10}$ in response to a pump excitation. Similar calculations performed on the alkali-doped fulleride K$_3$C$_{60}$ reveal that a photo-induced superconducting state is generated after irradiation by an ultrafast mid-infrared pulse of sufficient intensity, as reported in prior experimental work. The enhancement in this framework is attributed to the excitation of quasiparticles to energies resonant with the strongest electron-phonon coupling in K$_3$C$_{60}$, in close analogy to the mechanism for enhancement of superconductivity under microwave irradiation, explaining the nature of the photo-induced superconducting state and elucidating the subsequent quasiparticle and phonon dynamics. Our results suggest that photo-induced superconductivity is accessible in more materials than previously recognized. We demonstrate this by performing calculations on calcium-intercalated graphite, CaC$_6$, and predict a similar photo-induced superconducting gap.

cond-mat.supr-con↗

arXiv2026

Fast Real-Axis Eliashberg Calculations: Full-bandwidth solutions beyond the constant density of states approximation

Experimentally relevant signatures of superconductivity require access to real-frequency quantities, such as the spectral functions, optical response, and transport properties, yet Migdal-Eliashberg calculations are commonly performed on the imaginary axis and then analytically continued, a step that is numerically delicate and can obscure physically relevant spectral features. Here we present a practical route to solving the finite-temperature Migdal-Eliashberg equations directly on the real-frequency axis, while retaining the effects from the full-bandwidth electronic structure. Our formulation accounts for particle-hole asymmetry through an energy-dependent electronic density of states, avoiding the constant density of states approximation often used in real-axis calculations, and includes a static screened Coulomb contribution. We introduce an efficient numerical technique to solve the Migdal-Eliashberg integrals whose computational cost scales linearly with the real-frequency grid, making high-resolution, full-bandwidth real-axis calculations feasible and providing direct access to the interacting Green's function and derived observables without analytic continuation. As an illustration, we apply the method to H$_{3}$S, where a van-Hove singularity near the Fermi level produces strong particle-hole asymmetry. The full-bandwidth solution yields noticeably different spectra than the constant density of states approximation and brings the superconducting gap and lineshapes into closer agreement with experiment, highlighting when band-structure details are essential. Furthermore, the methods presented here open the door to time-dependent, nonequilibrium simulations within Eliashberg theory.

cond-mat.supr-con↗

arXiv2025

Fast-Recovery Epitaxial NbN Superconducting Nanowire Single-Photon Detectors with Saturated Efficiency at 1550 nm in Liquid Helium

Achieving both high internal efficiency and fast reset times at elevated temperatures remains challenging due to limited understanding of how film properties govern SNSPD performance. We demonstrate that epitaxial NbN films on sapphire enable simultaneous high efficiency and rapid response. We fabricate and characterize SNSPDs based on these films deposited via DC magnetron sputtering on c-cut sapphire. High-quality epitaxial growth preserves a low electron diffusion coefficient and promotes strong electron-phonon coupling, yielding a high critical temperature and efficient hotspot formation in the dirty limit. X-ray diffraction and transmission electron microscopy confirm epitaxial alignment and lattice order. Nanowires of 20 nm width exhibit saturated internal efficiency at 1550 nm wavelength and short reset times at 4.2 K, enabled by lattice matching and high thermal conductance of the sapphire interface. Ab initio modeling reproduces photon count rates, linking device performance quantitatively to film properties such as diffusivity and electron-phonon coupling.

physics.app-ph↗

arXiv2025

Ab initio modeling of nonequilibrium dynamics in superconducting detectors and qubits

Nonequilibrium quasiparticle (QP) and phonon dynamics are central to the operation of superconducting devices. Superconducting detectors, such as the superconducting nanowire single-photon detector, perform best when a large QP population is generated in response to small perturbations. Conversely, for superconducting qubits and topologically protected Majorana fermions, even relatively small QP densities can lead to significant performance degradation, and thus, ideal materials are less susceptible to QP poisoning. However, existing models of these devices lack a rigorous description of the QP and phonon dynamics, relying on approximations and phenomenology. In this article, we combine kinetic equations with density functional theory to model the nonequilibrium dynamics of a superconducting film ab initio. To demonstrate the universality of our model, we illustrate two examples: (1) we develop a model for the detection of single photons in superconducting nanowires, and (2) we calculate the energy-relaxation rate of a transmon qubit due to the presence of excess QPs. Our examples demonstrate from first principles that NbN is well-suited for single-photon detection and that Ta transmon qubits possess reduced sensitivity to QP poisoning relative to other materials, which is likely in part responsible for their longer coherence times. In contrast to previous models, our ab initio approach makes these predictions without experimental input and thus can be used to accelerate progress in device development. Moreover, by considering the full-bandwidth electron-phonon coupling, our approach can incorporate strong-coupling effects. Our methods effectively integrate ab initio materials modeling with nonequilibrium theory of superconductivity to perform practical modeling of superconducting devices, providing a comprehensive approach that connects fundamental theory with device applications.

cond-mat.supr-con↗

arXiv2024

Characterizing and modeling the influence of geometry on the performance of superconducting nanowire cryotrons

The scaling of superconducting nanowire-based devices to larger arrays is often limited by the cabling required to interface with each device. Cryogenic integrated circuits constructed from nanowire cryotrons, or nanocryotrons, can address this limitation by performing signal processing on chip. In this study, we characterize key performance metrics of the nanocryotron to elucidate its potential as a logical element in cryogenic integrated circuits and develop an electro-thermal model to connect material parameters with device performance. We find that the performance of the nanocryotron depends significantly on the device geometry, and trade-offs are associated with optimizing the gain, jitter, and energy dissipation. We demonstrate that nanocryotrons fabricated on niobium nitride can achieve a grey zone less than 210 nA wide for a 5 ns long input pulse corresponding to a maximum achievable gain of 48 dB, an energy dissipation of less than 20 aJ per operation, and a jitter of less than 60 ps.

cond-mat.supr-con↗

arXiv2023

Coherent control of a superconducting qubit using light

Quantum communications technologies require a network of quantum processors connected with low loss and low noise communication channels capable of distributing entangled states. Superconducting microwave qubits operating in cryogenic environments have emerged as promising candidates for quantum processor nodes. However, scaling these systems is challenging because they require bulky microwave components with high thermal loads that can quickly overwhelm the cooling power of a dilution refrigerator. Telecommunication frequency optical signals, meanwhile, can be fabricated in significantly smaller form factors while avoiding challenges due to high signal loss, noise sensitivity, and thermal loads due to their high carrier frequency and propagation in silica optical fibers. Transduction of information via coherent links between optical and microwave frequencies is therefore critical to leverage the advantages of optics for superconducting microwave qubits, while also enabling superconducting processors to be linked with low-loss optical interconnects. Here, we demonstrate coherent optical control of a superconducting qubit. We achieve this by developing a microwave-optical quantum transducer that operates with up to 1.18% conversion efficiency with low added microwave noise, and demonstrate optically-driven Rabi oscillations in a superconducting qubit.

quant-ph↗

arXiv2023

Wafer-Scale MgB2 Superconducting Devices

Progress in superconducting device and detector technologies over the past decade have realized practical applications in quantum computers, detectors for far-infrared telescopes, and optical communications. Superconducting thin film materials, however, have remained largely unchanged, with aluminum still being the material of choice for superconducting qubits, and niobium compounds for high frequency/high kinetic inductance devices. Magnesium diboride ($\mathrm{MgB}_2$), known for its highest transition temperature ($\mathrm{T}_c$ = 39 K) among metallic superconductors, is a viable material for elevated temperature and higher frequency superconducting devices moving towards THz frequencies. However, difficulty in synthesizing wafer-scale thin films have prevented implementation of $\mathrm{MgB}_2$ devices into the application base of superconducting electronics. Here, we report ultra-smooth (< 0.5 nm root-mean-square roughness) and uniform $\mathrm{MgB}_2$ thin (< 100 nm) films over 100 mm in diameter for the first time and present prototype devices fabricated with these films demonstrating key superconducting properties including internal quality factor over $\mathrm{10}^4$ at 4.5 K and high tunable kinetic inductance in the order of tens of pH/sq in a 40 nm film. This groundbreaking advancement will enable development of elevated temperature, high frequency superconducting quantum circuits and devices.

cond-mat.supr-con↗

arXiv2022

Reduced ITO for Transparent Superconducting Electronics

Absorption of light in superconducting electronics is a major limitation on the quality of circuit architectures that integrate optical components with superconducting components. A 10 nm thick film of a typical superconducting material like niobium can absorb over half of any incident optical radiation. We propose instead using superconductors which are transparent to the wavelengths used elsewhere in the system. In this paper we investigated reduced indium tin oxide (ITO) as a potential transparent superconductor for electronics. We fabricated and characterized superconducting wires of reduced indium tin oxide. We also showed that a $\SI{10}{nm}$ thick film of the material would only absorb about 1 - 20\% of light between 500 - 1700 nm.

physics.app-ph↗