arXiv subjects

Evan Goetz

Publications and source records attributed to Evan Goetz.

15 recordsLinked to original sources

arXiv2026

Search for Long-Transient Gravitational Waves from Supernova SN2023ixf using GFH-v2 Pipeline

We present a directed search for long-transient gravitational waves from the possible newborn magnetar remnant of SN2023ixf, a nearby Type II core-collapse supernova in the M101 galaxy. The analysis uses LIGO Hanford and Livingston data from Engineering Run 15, using coincident data lying within the on-source window associated with the supernova. We target signals from a rapidly rotating, non-axisymmetric neutron star whose spin-down is dominated by gravitational-wave emission, producing a power-law decrease in frequency and a corresponding decrease in strain amplitude. The search is performed with the GFH-v2 pipeline, based on the Generalized Frequency Hough transform. No candidate survives the coincidence and follow-up analysis. We therefore set upper limits on the maximum detectable distance as a function of initial frequency and ellipticity. For the highest ellipticity interval, the 90% upper limits reach distances of about 1-2.5~Mpc across most of the analysed band. Although these limits are below the distance to M101, the search provides the first application of GFH-v2 to a nearby core-collapse supernova and characterizes its performance on real detector data.

astro-ph.IM↗

arXiv2026

Search for continuous gravitational waves from neutron stars in five globular clusters in the first part of the fourth LIGO-Virgo-KAGRA observing run

We present the results of directed searches for continuous gravitational waves from unknown neutron stars in five Milky Way globular clusters. We carry out these searches in the LIGO data from the first eight months of the fourth LIGO-Virgo-KAGRA observing run using the WEAVE semicoherent program, which sums matched-filter detection-statistic values over many time segments spanning the observation period. No gravitational wave signal is detected in the search band of 20-475 Hz. Injections of simulated continuous wave signals in the data indicate that we achieve the most sensitive results to date across most of the explored parameter space volume, obtaining median 95% confidence level upper limits as low as $\sim 4.2 \times 10^{-26}$ near 282 Hz for NGC 6397. We also derive upper limits on neutron star ellipticity and $r$-mode amplitudes, reaching $\lesssim 10^{-5}$ and $\lesssim 10^{-3}$, respectively, at frequencies above 200 Hz.

gr-qc↗

arXiv2024

Squeezing the quantum noise of a gravitational-wave detector below the standard quantum limit

Precision measurements of space and time, like those made by the detectors of the Laser Interferometer Gravitational-wave Observatory (LIGO), are often confronted with fundamental limitations imposed by quantum mechanics. The Heisenberg uncertainty principle dictates that the position and momentum of an object cannot both be precisely measured, giving rise to an apparent limitation called the Standard Quantum Limit (SQL). Reducing quantum noise below the SQL in gravitational-wave detectors, where photons are used to continuously measure the positions of freely falling mirrors, has been an active area of research for decades. Here we show how the LIGO A+ upgrade reduced the detectors' quantum noise below the SQL by up to 3 dB while achieving a broadband sensitivity improvement, more than two decades after this possibility was first presented.

gr-qc↗

arXiv2023

Search for continuous gravitational waves directed at sub-threshold radiometer candidates in O3 LIGO data

We present results of a follow-up search for continuous gravitational waves (CWs) associated with sub-threshold candidates from the LIGO-Virgo-KAGRA (LVK) All-Sky All-Frequency (ASAF) directed radiometer analysis, using Advanced LIGO data from the third observing run (O3). Each ASAF candidate corresponds to a $1/32\,\,\mathrm{Hz}$ frequency band and ${\sim}13\,\,\mathrm{deg}^2$ sky pixel. Assuming they represent possible CW sources, we analyze all $515$ ASAF candidates using a semi-coherent, $\mathcal{F}$-statistic-based matched filter search. The search algorithm incorporates a hidden Markov model (HMM), expanding the signal model to allow frequency spin-wandering, as well as unmodeled frequency evolution of less than $10^{-5}$ Hz per day that is not captured by the searched range of $\pm10^{-9}\,\,\mathrm{Hz/s}$ in frequency derivative. Significance thresholds with a $5\%$ probability of false alarm per ASAF candidate are determined empirically by searching detector noise at various off-target sky positions. We obtain $14$ outliers surviving a set of vetoes designed to eliminate instrumental artifacts. Upon further investigation, these outliers are deemed unlikely to represent astrophysical signals. We estimate the sensitivity of our search to both isolated and binary sources with orbital period greater than one year by recovering simulated signals added to detector data. The minimum detectable strain amplitude at $95\%$ confidence for isolated (long-period binary) sources is $h_0^{95\%} = 8.8\times 10^{-26}$ ($9.4\times 10^{-26}$) at a frequency of $222.6\,\,\mathrm{Hz}$. While this study focuses on ASAF sub-threshold candidates, the method presented could be applied to follow up candidates from future all-sky CW searches, complementing currently existing methods.

gr-qc↗

arXiv2023

Search for Gravitational Waves from Scorpius X-1 in LIGO O3 Data With Corrected Orbital Ephemeris

Improved observational constraints on the orbital parameters of the low-mass X-ray binary Scorpius~X-1 were recently published in Killestein et al (2023). In the process, errors were corrected in previous orbital ephemerides, which have been used in searches for continuous gravitational waves from Sco~X-1 using data from the Advanced LIGO detectors. We present the results of a re-analysis of LIGO detector data from the third observing run of Advanced LIGO and Advanced Virgo using a model-based cross-correlation search. The corrected region of parameter space, which was not covered by previous searches, was about 1/3 as large as the region searched in the original O3 analysis, reducing the required computing time. We have confirmed that no detectable signal is present over a range of gravitational-wave frequencies from $25\textrm{Hz}$ to $1600\textrm{Hz}$, analogous to the null result of Abbott et al (2022). Our search sensitivity is comparable to that of Abbott et al (2022), who set upper limits corresponding, between $100\textrm{Hz}$ and $200\textrm{Hz}$, to an amplitude $h_0$ of about $10^{-25}$ when marginalized isotropically over the unknown inclination angle of the neutron star's rotation axis, or less than $4\times 10^{-26}$ assuming the optimal orientation.

astro-ph.HE↗

arXiv2021

Characterization of systematic error in Advanced LIGO calibration in the second half of O3

We present the probability distribution of the systematic errors in the most accurate, high-latency version of the reconstructed dimensionless strain $h$, at the Hanford and Livingston LIGO detectors, used for gravitational-wave astrophysical analysis, including parameter estimation, in the last five months of the third observing run (O3B). This work extends the results presented in Sun et. al (2020) [1] for the first six months of the third observing run (O3A). The complex-valued, frequency-dependent, and slowly time-varying systematic error (excursion from unity magnitude and zero phase) in O3B generally remains at a consistent level as in O3A, yet changes of detector configurations in O3B have introduced a non-negligible change in the frequency dependence of the error, leading to larger excursions from unity at some frequencies and/or during some observational periods; in some other periods the excursions are smaller than those in O3A. For O3B, the upper limit on the systematic error and associated uncertainty is 11.29% in magnitude and 9.18 deg in phase (68% confidence interval) in the most sensitive frequency band 20-2000 Hz. The systematic error alone is estimated at levels of < 2% in magnitude and $\lesssim 4$ deg in phase. These errors and uncertainties are dominated by the imperfect modeling of the frequency dependence of the detector response functions rather than the uncertainty in the absolute reference, the photon calibrators.

astro-ph.IM↗

arXiv2021

Point absorbers in Advanced LIGO

Small, highly absorbing points are randomly present on the surfaces of the main interferometer optics in Advanced LIGO. The resulting nano-meter scale thermo-elastic deformations and substrate lenses from these micron-scale absorbers significantly reduces the sensitivity of the interferometer directly though a reduction in the power-recycling gain and indirect interactions with the feedback control system. We review the expected surface deformation from point absorbers and provide a pedagogical description of the impact on power build-up in second generation gravitational wave detectors (dual-recycled Fabry-Perot Michelson interferometers). This analysis predicts that the power-dependent reduction in interferometer performance will significantly degrade maximum stored power by up to 50% and hence, limit GW sensitivity, but suggests system wide corrections that can be implemented in current and future GW detectors. This is particularly pressing given that future GW detectors call for an order of magnitude more stored power than currently used in Advanced LIGO in Observing Run 3. We briefly review strategies to mitigate the effects of point absorbers in current and future GW wave detectors to maximize the success of these enterprises.

physics.ins-det↗

arXiv2020

physiCal: A physical approach to the marginalization of LIGO calibration uncertainties

The data from ground based gravitational-wave detectors such as Advanced LIGO and Virgo must be calibrated to convert the digital output of photodetectors into a relative displacement of the test masses in the detectors, producing the quantity of interest for inference of astrophysical gravitational wave sources. Both statistical uncertainties and systematic errors are associated with the calibration process, which would in turn affect the analysis of detected sources, if not accounted for. Currently, source characterization algorithms either entirely neglect the possibility of calibration uncertainties or account for them in a way that does not use knowledge of the calibration process itself. We present physiCal, a new approach to account for calibration errors during the source characterization step, which directly uses all the information available about the instrument calibration process. Rather than modeling the overall detector's response function, we consider the individual components that contribute to the response. We implement this method and apply it to the compact binaries detected by LIGO and Virgo during the second observation run, as well as to simulated binary neutron stars for which the sky position and distance are known exactly. We find that the physiCal model performs as well as the method currently used within the LIGO-Virgo collaboration, but additionally it enables improving the measurement of specific components of the instrument control through astrophysical calibration.

gr-qc↗

arXiv2020

Characterization of systematic error in Advanced LIGO calibration

The raw outputs of the detectors within the Advanced Laser Interferometer Gravitational-Wave Observatory need to be calibrated in order to produce the estimate of the dimensionless strain used for astrophysical analyses. The two detectors have been upgraded since the second observing run and finished the year-long third observing run. Understanding, accounting, and/or compensating for the complex-valued response of each part of the upgraded detectors improves the overall accuracy of the estimated detector response to gravitational waves. We describe improved understanding and methods used to quantify the response of each detector, with a dedicated effort to define all places where systematic error plays a role. We use the detectors as they stand in the first half (six months) of the third observing run to demonstrate how each identified systematic error impacts the estimated strain and constrain the statistical uncertainty therein. For this time period, we estimate the upper limit on systematic error and associated uncertainty to be $< 7\%$ in magnitude and $< 4$ deg in phase ($68\%$ confidence interval) in the most sensitive frequency band 20-2000 Hz. The systematic error alone is estimated at levels of $< 2\%$ in magnitude and $< 2$ deg in phase.

astro-ph.IM↗

arXiv2019

The US Program in Ground-Based Gravitational Wave Science: Contribution from the LIGO Laboratory

Recent gravitational-wave observations from the LIGO and Virgo observatories have brought a sense of great excitement to scientists and citizens the world over. Since September 2015,10 binary black hole coalescences and one binary neutron star coalescence have been observed. They have provided remarkable, revolutionary insight into the "gravitational Universe" and have greatly extended the field of multi-messenger astronomy. At present, Advanced LIGO can see binary black hole coalescences out to redshift 0.6 and binary neutron star coalescences to redshift 0.05. This probes only a very small fraction of the volume of the observable Universe. However, current technologies can be extended to construct "$3^\mathrm{rd}$ Generation" (3G) gravitational-wave observatories that would extend our reach to the very edge of the observable Universe. The event rates over such a large volume would be in the hundreds of thousands per year (i.e.tens per hour). Such 3G detectors would have a 10-fold improvement in strain sensitivity over the current generation of instruments, yielding signal-to-noise ratios of 1000 for events like those already seen. Several concepts are being studied for which engineering studies and reliable cost estimates will be developed in the next 5 years.

astro-ph.IM↗

arXiv2019

Blip glitches in Advanced LIGO data

Blip glitches are short noise transients present in data from ground-based gravitational-wave observatories. These glitches resemble the gravitational-wave signature of massive binary black hole mergers. Hence, the sensitivity of transient gravitational-wave searches to such high-mass systems and other potential short duration sources is degraded by the presence of blip glitches. The origin and rate of occurrence of this type of glitch have been largely unknown. In this paper we explore the population of blip glitches in Advanced LIGO during its first and second observing runs. On average, we find that Advanced LIGO data contains approximately two blip glitches per hour of data. We identify four subsets of blip glitches correlated with detector auxiliary or environmental sensor channels, however the physical causes of the majority of blips remain unclear.

physics.ins-det↗

arXiv2017

Calibration Uncertainty for Advanced LIGO's First and Second Observing Runs

Calibration of the Advanced LIGO detectors is the quantification of the detectors' response to gravitational waves. Gravitational waves incident on the detectors cause phase shifts in the interferometer laser light which are read out as intensity fluctuations at the detector output. Understanding this detector response to gravitational waves is crucial to producing accurate and precise gravitational wave strain data. Estimates of binary black hole and neutron star parameters and tests of general relativity require well-calibrated data, as miscalibrations will lead to biased results. We describe the method of producing calibration uncertainty estimates for both LIGO detectors in the first and second observing runs.

astro-ph.IM↗

arXiv2016

Searches for continuous gravitational waves from Scorpius X-1 and XTE J1751-305 in LIGO's sixth science run

Scorpius X-1 (Sco X-1) and X-ray transient (XTE) J1751-305 are Low-Mass X-ray Binaries (LMXBs) that may emit continuous gravitational waves detectable in the band of ground-based interferometric observatories. Neutron stars in LMXBs could reach a torque-balance steady-state equilibrium in which angular momentum addition from infalling matter from the binary companion is balanced by angular momentum loss, conceivably due to gravitational-wave emission. Torque-balance predicts a scale for detectable gravitational-wave strain based on observed X-ray flux. This paper describes a search for Sco X-1 and XTE J1751-305 in LIGO Science Run 6 data using the TwoSpect algorithm, based on searching for orbital modulations in the frequency domain. While no detections are claimed, upper limits on continuous gravitational-wave emission from Sco X-1 are obtained, spanning gravitational-wave frequencies from 40 to 2040 Hz and projected semi-major axes from 0.90 to 1.98 light-seconds. These upper limits are injection validated, equal any previous set in initial LIGO data, and extend over a broader parameter range. At optimal strain sensitivity, achieved at 165 Hz, the 95% confidence level random-polarization upper limit on dimensionless strain $h_0$ is approximately $1.8 \times 10^{-24}$. Closest approach to the torque-balance limit, within a factor of 27, is also at 165 Hz. These are the first upper limits known to date on $r$-mode emission from this XTE source. Upper limits are set in particular narrow frequency bands of interest for J1751-305. The TwoSpect method will be used in upcoming searches of Advanced LIGO and Virgo data.

gr-qc↗

arXiv2015

Tuning into Scorpius X-1: adapting a continuous gravitational-wave search for a known binary system

We describe how the TwoSpect data analysis method for continuous gravitational waves (GWs) has been tuned for directed sources such as the Low Mass X-ray Binary (LMXB), Scorpius X-1 (Sco X-1). A comparison of five search algorithms generated simulations of the orbital and GW parameters of Sco X-1. Where that comparison focused on relative performance, here the simulations help quantify the sensitivity enhancement and parameter estimation abilities of this directed method, derived from an all-sky search for unknown sources, using doubly Fourier- transformed data. Sensitivity is shown to be enhanced when the source sky location and period are known, because we can run a fully-templated search, bypassing the all-sky hierarchical stage using an incoherent harmonic sum. The GW strain and frequency as well as the projected semi-major axis of the binary system are recovered and uncertainty estimated, for simulated signals that are detected. Upper limits on GW strain are set for undetected signals. Applications to future GW observatory data are discussed. Robust against spin-wandering and computationally tractable despite unknown frequency, this directed search is an important new tool for finding gravitational signals from LMXBs.

gr-qc↗

arXiv2015

Coherently combining short data segments for all-sky semi-coherent continuous gravitational wave searches

We present a method for coherently combining short data segments from gravitational-wave detectors to improve the sensitivity of semi-coherent searches for continuous gravitational waves. All-sky searches for continuous gravitational waves from unknown sources are computationally limited. The semi-coherent approach reduces the computational cost by dividing the entire observation timespan into short segments to be analyzed coherently, then combined together incoherently. Semi-coherent analyses that attempt to improve sensitivity by coherently combining data from multiple detectors face a computational challenge in accounting for uncertainties in signal parameters. In this article, we lay out a technique to meet this challenge using summed Fourier transform coefficients. Applying this technique to one all-sky search algorithm called TwoSpect, we confirm that the sensitivity of all-sky, semi-coherent searches can be improved by coherently combining the short data segments. For misaligned detectors, however, this improvement requires careful attention when marginalizing over unknown polarization parameters. In addition, care must be taken in correcting for differential detector velocity due to the Earth's rotation for high signal frequencies and widely separated detectors.

gr-qc↗