arXiv subjects

F. Rodriguez

Publications and source records attributed to F. Rodriguez.

11 recordsLinked to original sources

arXiv2026

Halo Occupation Distribution estimation performance for LSST data

Upcoming imaging surveys, such as the Vera C. Rubin Observatory Legacy Survey of Space and Time (LSST), will enable high signal-to-noise measurements of galaxy clustering. The halo occupation distribution (HOD) is a widely used framework to describe the connection between galaxies and dark matter haloes, playing a key role in evaluating models of galaxy formation and constraining cosmological parameters. Consequently, developing robust methods for estimating this statistic is crucial to fully exploit data from current and future galaxy surveys. The main goal of this project is to extend a background subtraction method to estimate the HOD with more photometry-based information in preparation for the clustering analysis of the upcoming LSST data and to enable the study of the HOD with significantly improved statistical power. We evaluate the performance of the method using a mock galaxy redshift survey constructed from the cosmoDC2 catalogue. We implement an extension of the background subtraction technique to utilize information from photometric galaxy surveys. To identify the centres of galaxy groups, we implement an iterative centroiding approach (Central Galaxy Finder). We evaluate the impact of each step in our pipeline, including group size estimation from luminosity and purity, and completeness on group identification, along with the influence of observational systematics such as the use of photometric redshifts and halo mass uncertainties. We demonstrate the validity of the proposed method using a mock galaxy catalogue, recovering the HOD from cosmoDC2 over the absolute magnitude range $M_r = -20.0$ to $-17.0$ and halo masses up to $10^{15}\, \mathrm{M_\odot}$. We present key performance metrics to quantify the precision and reliability of the group finder and the resulting HOD measurements.

astro-ph.CO↗

arXiv2025

Efficient variable-length hanging tether parameterization for marsupial robot planning in 3D environments

This paper presents a novel approach to efficiently parameterize and estimate the state of a hanging tether for path and trajectory planning of a UGV tied to a UAV in a marsupial configuration. Most implementations in the state of the art assume a taut tether or make use of the catenary curve to model the shape of the hanging tether. The catenary model is complex to compute and must be instantiated thousands of times during the planning process, becoming a time-consuming task, while the taut tether assumption simplifies the problem, but might overly restrict the movement of the platforms. In order to accelerate the planning process, this paper proposes defining an analytical model to efficiently compute the hanging tether state, and a method to get a tether state parameterization free of collisions. We exploit the existing similarity between the catenary and parabola curves to derive analytical expressions of the tether state.

cs.RO↗

arXiv2024

The PAU Survey: Enhancing photometric redshift estimation using DEEPz

We present photometric redshifts for 1 341 559 galaxies from the Physics of the Accelerating Universe Survey (PAUS) over 50.38 ${\rm deg}^{2}$ of sky to $i_{\rm AB}=23$. Redshift estimation is performed using DEEPz, a deep-learning photometric redshift code. We analyse the photometric redshift precision when varying the photometric and spectroscopic samples. Furthermore, we examine observational and instrumental effects on the precision of the photometric redshifts, and we compare photometric redshift measurements with those obtained using a template method-fitting BCNz2. Finally, we examine the use of photometric redshifts in the identification of close galaxy pairs. We find that the combination of samples from W1+W3 in the training of DEEPz significantly enhances the precision of photometric redshifts. This also occurs when we recover narrow band fluxes using broad bands measurements. We show that DEEPz determines the redshifts of galaxies in the prevailing spectroscopic catalogue used in the training of DEEPz with greater precision. For the faintest galaxies ($i_{\rm AB}=21-23$), we find that DEEPz improves over BCNz2 both in terms of the precision (20-50 per cent smaller scatter) and in returning a smaller outlier fraction in two of the wide fields. The catalogues were tested for the identification of close galaxy pairs, showing that DEEPz is effective for the identification of close galaxy pairs for samples with $i_{\rm AB} < 22.5$ and redshift $0.2 < z < 0.6$. In addition, identifying close galaxy pairs common between DEEPz and BCNz2 is a promising approach to improving the purity of the catalogues of these systems.

astro-ph.GA↗

arXiv2024

Compact groups of galaxies in GAMA -- Probing the densest minor systems at intermediate redshifts

[Abridged] Over the years, several compact group catalogues have been built using different methods, but most of them are not deep enough to go beyond the very local universe with a high level of redshift completeness. We build statistically reliable samples of compact groups to study the influence of their inner extreme environment at intermediate redshifts. We adopted the GAMA redshift survey as a parent catalogue, complemented with galaxies from the SDSS, to identify compact groups using Hickson-like criteria. We explored the parameter space to perform several identifications: we reduced the maximum galaxy separation in the line-of-sight to 500 km/s and we implemented different magnitude ranges to define membership. For comparison, we used control samples extracted from a catalogue of loose groups to contrast properties with the compact groups. We build five considerably large compact group samples, ranging from more than 400 up to ~2400 systems, and maximum redshifts from 0.2 to 0.4. The overall properties of each sample are in agreement with previous findings. Compact groups tend to have a larger fraction of quenched galaxies than control loose groups, mainly for low stellar mass galaxies in compact groups with small crossing times. In addition, ~45% of compact groups are embedded in loose galaxy systems and display the highest compactness, lowest crossing times and brightest first-ranked galaxies compared to compact groups considered non-embedded or isolated. There is almost no evolution of compact group properties with redshift. Our results confirm previous findings that postulate compact groups as one of the suitable places to study the suppression of the star formation rate in galaxies primarily due to galaxy interactions. These new samples will be valuable to deepen the analysis of these peculiar galaxy systems in a redshift regime poorly explored so far.

astro-ph.GA↗

arXiv2024

Structure and large scale environment of galaxy pairs in the S-PLUS DR4

In this paper, we use photometric data from the S-PLUS DR4 survey to identify isolated galaxy pairs and analyse their characteristics and properties. Our results align with previous spectroscopic studies, particularly in luminosity function parameters, suggesting a consistent trait among galaxy systems. Our findings reveal a high fraction of red galaxies across all samples, irrespective of projected distance, velocity difference, or luminosity ratio. We found that the proximity of a neighbour to its central galaxy influences its colour due to environmental effects. We also found that central and neighbour have different behaviours: central galaxies maintain a stable red colour regardless of luminosity, while neighbour colours vary based on luminosity ratios. When the central is significantly brighter, the neighbour tends to be less red. According to our division in red, blue and mixed pairs, we found evidence of galactic conformity. Red pair fractions increase in closer pairs and in pairs of similar luminosity, indicating shared environments promoting red galaxy formation. Analysing local density, the expected colour-density relation is of course recovered, but it is strongly determined by the stellar mass of the pair. In denser environments, the red pair fractions increase, blue pairs decrease and for mixed pairs it depends on their stellar mass: more massive mixed pairs decrease their fraction whereas the lower massive ones increase it. These results shed light on the intricate relationship between galaxy pairs, their characteristics, and environmental influences on colour, providing insights into their evolutionary histories.

astro-ph.GA↗

arXiv2023

The PAU Survey: Close galaxy pairs identification and analysis

Galaxy pairs constitute the initial building blocks of galaxy evolution, which is driven through merger events and interactions. Thus, the analysis of these systems can be valuable in understanding galaxy evolution and studying structure formation. In this work, we present a new publicly available catalogue of close galaxy pairs identified using photometric redshifts provided by the Physics of the Accelerating Universe Survey (PAUS). To efficiently detect them we take advantage of the high-precision photo$-z$ ($\sigma_{68} < 0.02$) and apply an identification algorithm previously tested using simulated data. This algorithm considers the projected distance between the galaxies ($r_p < 50$ kpc), the projected velocity difference ($\Delta V < 3500$ km/s) and an isolation criterion to obtain the pair sample. We applied this technique to the total sample of galaxies provided by PAUS and to a subset with high-quality redshift estimates. Finally, the most relevant result we achieved was determining the mean mass for several subsets of galaxy pairs selected according to their total luminosity, colour and redshift, using galaxy-galaxy lensing estimates. For pairs selected from the total sample of PAUS with a mean $r-$band luminosity $10^{10.6} h^{-2} L_\odot$, we obtain a mean mass of $M_{200} = 10^{12.2} h^{-1} M_\odot$, compatible with the mass-luminosity ratio derived for elliptical galaxies. We also study the mass-to-light ratio $M/L$ as a function of the luminosity $L$ and find a lower $M/L$ (or steeper slope with $L$) for pairs than the one extrapolated from the measurements in groups and galaxy clusters.

astro-ph.GA↗

arXiv2019

3D strain in 2D materials: Experimental test in unsupported monolayer graphene under pressure

Previous Raman measurements on supported graphene under high pressure reported a very different shift rate of in-plane phonon frequency of graphene (16 cm$^{-1}$GPa$^{-1}$) from graphite (4.7 cm$^{-1}$GPa$^{-1}$), implying very different in-plane anharmonicity that graphene gets stiffer than graphite in-plane under the same pressure. It was suggested that it could be due to the adhesion of graphene to substrates. We have therefore performed high pressure Raman measurements on unsupported graphene and we find a similar in-plane stiffness and anharmonicity of graphene (5.4 cm$^{-1}$GPa$^{-1}$) to graphite. On the other hand, the out-of-plane stiffness of graphene is hard to define, due to the 2D nature of graphene. However, we estimate a similar out-of-plane stiffness of graphene (1.4$\pm$295 GPa) to that of graphite (38.7$\pm$7 GPa), by measuring its effect on the shift of the in-plane phonon frequency with pressure.

cond-mat.mtrl-sci↗

arXiv2017

Nonlinear light mixing by graphene plasmons

Graphene is known to possess strong optical nonlinearity. Its nonlinear response can be further enhanced by graphene plasmons. Here, we report a novel nonlinear electro-absorption effect observed in nanostructured graphene due to excitation of graphene plasmons. We experimentally detect and theoretically explain enhanced nonlinear mixing of near-infrared and mid-infrared light in arrays of graphene nanoribbons. Strong compression of light by graphene plasmons implies that the effect is non-local in nature and orders of magnitude larger than the conventional local graphene nonlinearity. The effect can be used in variety of applications including nonlinear light modulators, light multiplexors, light logic, and sensing devices.

cond-mat.mes-hall↗

arXiv2014

The Significance of Bundling Effects on Carbon Nanotubes' Response to Hydrostatic Compression

The study of the G-mode pressure coefficients of carbon nanotubes, reflecting the stiff sp2 bond pressure dependence, is essential to the understanding of their extraordinary mechanical properties as well as fundamental mechanics. However, it is hindered by the availability of carbon nanotubes samples only as bundles or isolated with surfactants. Octadecylamine functionalized carbon nanotubes are mostly of a single diameter and can be stably dispersed in 1, 2-dichloroethane and chloroform without surfactants. Here we perform high pressure Raman spectroscopy on these tubes and obtain their experimental G-mode pressure coefficients for individual tubes and bundles. The G-plus pressure coefficient for bundles is only about half of that for individual tubes in 1, 2-dichloroethane and is about two-thirds in chloroform. The G-minus pressure coefficient for bundles is about one-third of G-plus in 1, 2-dichloroethane and about the same in chloroform. These results for the first time provide unambiguous experimental evidence of the significant effect of bundling on carbon nanotubes' G-mode pressure coefficients, identifying it as one of the major reasons for the lack of consensus on what the values should be in the literature.

cond-mat.mtrl-sci↗

arXiv2012

Anomalous high-pressure Jahn-Teller behavior in CuWO4

High-pressure optical-absorption measurements performed in CuWO4 up to 20 GPa provide experimental evidence of the persistence of the Jahn-Teller (JT) distortion in the whole pressure range both in the low-pressure triclinic and in the highpressure monoclinic phase. The electron-lattice coupling associated with the eg(Exe) and t2g(Txe) orbitals of Cu2+ in CuWO4 are obtained from correlations between the JT distortion of the CuO6 octahedron and the associated structure of Cu2+ d-electronic levels. This distortion and its associated JT energy (EJT) decrease upon compression in both phases. However, both the distortion and associated EJT increase sharply at the phase transition pressure (PT = 9.9 GPa) and we estimate that the JT distortion persists for a wide pressure range not being suppressed up to 37 GPa. These results shed light on the transition mechanism of multiferroic CuWO4 suggesting that the pressureinduced structural phase transition is a way to minimize the distortive effects associated with the toughness of the JT distortion.

cond-mat.mtrl-sci↗

arXiv2010

High-pressure structural phase transitions in CuWO4

We study the effects of pressure on the structural, vibrational, and magnetic behavior of cuproscheelite. We performed powder x-ray diffraction and Raman spectroscopy experiments up to 27 GPa as well as ab initio total-energy and lattice-dynamics calculations. Experiments provide evidence that a structural phase transition takes place at 10 GPa from the low-pressure triclinic phase (P-1) to a monoclinic wolframite-type structure (P2/c). Calculations confirmed this finding and indicate that the phase transformation involves a change in the magnetic order. In addition, the equation of state for the triclinic phase is determined: V0 = 132.8(2) A3, B0 = 139 (6) GPa and = 4. Furthermore, experiments under different stress conditions show that non-hydrostatic stresses induce a second phase transition at 17 GPa and reduce the compressibility of CuWO4, B0 = 171(6) GPa. The pressure dependence of all Raman modes of the triclinic and high-pressure phases is also reported and discussed.

cond-mat.mtrl-sci↗