arXiv subjects

F. Sayede

Publications and source records attributed to F. Sayede.

5 recordsLinked to original sources

arXiv2021

The Solar Line Emission Dopplerometer project

Observations of the dynamics of solar coronal structures are necessary to investigate space weather phenomena and global heating of the corona. The profiles of high temperature lines emitted by the hot plasma are usually integrated by narrow band filters or recorded by classical spectroscopy. We present in this paper details of a new transportable instrument (under construction) for imaging spectroscopy: the Solar Line Emission Dopplerometer (SLED). It uses the Multi-channel Subtractive Double Pass (MSDP) technique, which combines the advantages of both filters and narrow slit spectrographs, i.e. high temporal, spatial and spectral resolutions. The SLED will measure at high cadence (1 Hz) the line-of-sight velocities (Doppler shifts) of hot coronal loops, in the forbidden lines of FeX 637. nm and FeXIV 530.3 nm. It will follow the dynamics of fast evolving events of solar activity such as flares or Coronal Mass Ejections (CMEs), and also study coronal heating by short period waves. Observations will be performed with the coronagraph at the Lomnicky Stit Observatory (LSO, in Slovakia) or during total eclipses. The SLED will also observe the dynamics of solar prominences in Halpha 656.3 nm or HeD3 587.6 nm lines when mounted on the Bialkow coronagraph (near Wroclaw, Poland). It is fully compatible with polarimetric measurements by various techniques.

astro-ph.SR↗

arXiv2021

Four decades of advances from MSDP to S4I and SLED imaging spectrometers

The Multichannel Subtractive Double Pass (MSDP) is an imaging spectroscopy technique, which allows observations of spectral line profiles over a 2D field of view with high spatial and temporal resolution. It has been intensively used since 1977 on various spectrographs (Meudon, Pic du Midi, the German Vacuum Tower Telescope, THEMIS, Wroc{\l}aw). We summarize previous developments and describe the capabilities of a new design that has been developed at Meudon and that has higher spectral resolution and increased channel number: Spectral Sampling with Slicer for Solar Instrumentation (S4I), which can be combined with a new and fast polarimetry analysis. This new generation MSDP technique is well adapted to large telescopes. Also presented are the goals of a derived compact version of the instrument, the Solar Line Emission Dopplerometer (SLED), dedicated to dynamic studies of coronal loops observed in the forbidden iron lines, and prominences. It is designed for observing total solar eclipses, and for deployment on the Wroc{\l}aw and Lomnicky peak coronagraphs respectively for prominence and coronal observations.

astro-ph.SR↗

arXiv2016

The Gamma-ray Cherenkov Telescope for the Cherenkov Telescope Array

The Cherenkov Telescope Array (CTA) is a forthcoming ground-based observatory for very-high-energy gamma rays. CTA will consist of two arrays of imaging atmospheric Cherenkov telescopes in the Northern and Southern hemispheres, and will combine telescopes of different types to achieve unprecedented performance and energy coverage. The Gamma-ray Cherenkov Telescope (GCT) is one of the small-sized telescopes proposed for CTA to explore the energy range from a few TeV to hundreds of TeV with a field of view $\gtrsim 8^\circ$ and angular resolution of a few arcminutes. The GCT design features dual-mirror Schwarzschild-Couder optics and a compact camera based on densely-pixelated photodetectors as well as custom electronics. In this contribution we provide an overview of the GCT project with focus on prototype development and testing that is currently ongoing. We present results obtained during the first on-telescope campaign in late 2015 at the Observatoire de Paris-Meudon, during which we recorded the first Cherenkov images from atmospheric showers with the GCT multi-anode photomultiplier camera prototype. We also discuss the development of a second GCT camera prototype with silicon photomultipliers as photosensors, and plans toward a contribution to the realisation of CTA.

astro-ph.IM↗

arXiv2016

The GCT camera for the Cherenkov Telescope Array

The Gamma-ray Cherenkov Telescope (GCT) is proposed for the Small-Sized Telescope component of the Cherenkov Telescope Array (CTA). GCT's dual-mirror Schwarzschild-Couder (SC) optical system allows the use of a compact camera with small form-factor photosensors. The GCT camera is ~0.4 m in diameter and has 2048 pixels; each pixel has a ~0.2 degree angular size, resulting in a wide field-of-view. The design of the GCT camera is high performance at low cost, with the camera housing 32 front-end electronics modules providing full waveform information for all of the camera's 2048 pixels. The first GCT camera prototype, CHEC-M, was commissioned during 2015, culminating in the first Cherenkov images recorded by a SC telescope and the first light of a CTA prototype. In this contribution we give a detailed description of the GCT camera and present preliminary results from CHEC-M's commissioning.

astro-ph.IM↗

arXiv2013

SST-GATE: A dual mirror telescope for the Cherenkov Telescope Array

The Cherenkov Telescope Array (CTA) will be the world's first open observatory for very high energy gamma-rays. Around a hundred telescopes of different sizes will be used to detect the Cherenkov light that results from gamma-ray induced air showers in the atmosphere. Amongst them, a large number of Small Size Telescopes (SST), with a diameter of about 4 m, will assure an unprecedented coverage of the high energy end of the electromagnetic spectrum (above ~1TeV to beyond 100 TeV) and will open up a new window on the non-thermal sky. Several concepts for the SST design are currently being investigated with the aim of combining a large field of view (~9 degrees) with a good resolution of the shower images, as well as minimizing costs. These include a Davies-Cotton configuration with a Geiger-mode avalanche photodiode (GAPD) based camera, as pioneered by FACT, and a novel and as yet untested design based on the Schwarzschild-Couder configuration, which uses a secondary mirror to reduce the plate-scale and to allow for a wide field of view with a light-weight camera, e.g. using GAPDs or multi-anode photomultipliers. One objective of the GATE (Gamma-ray Telescope Elements) programme is to build one of the first Schwarzschild-Couder prototypes and to evaluate its performance. The construction of the SST-GATE prototype on the campus of the Paris Observatory in Meudon is under way. We report on the current status of the project and provide details of the opto-mechanical design of the prototype, the development of its control software, and simulations of its expected performance.

astro-ph.IM↗