arXiv subjects

G. Cheng

Publications and source records attributed to G. Cheng.

At least 19 recordsLinked to original sources

arXiv2026

Narrow spectral artifact investigation and mitigation in LIGO data from the fourth LIGO-Virgo-KAGRA observing run

We present efforts to identify, characterize, and mitigate narrow spectral artifacts in LIGO detector data during the fourth LIGO-Virgo-KAGRA observing run. Narrow spectral artifacts in gravitational-wave detectors are non-astrophysical noise sources that can degrade searches for narrowband persistent gravitational waves. Identifying and, where possible, mitigating these noise sources is one of the core efforts of the LIGO Detector Characterization group. Key software tools have been updated and new tools deployed for the fourth LIGO-Virgo-KAGRA observing run to facilitate investigations and data monitoring. We discuss these tool upgrades, and present several identified narrowband artifacts that have been successfully investigated and mitigated in LIGO data. Regardless of whether artifacts are mitigated or not, narrowband persistent gravitational-wave searches require information on which frequency bands contain non-astrophysical artifacts. Minimizing the number of bands containing non-astrophysical artifacts is essential to maximize the potential for discovery of a new class of gravitational-wave signals.

astro-ph.IM↗

arXiv2025

Benchmark brown dwarfs -- I. A blue M2 + T5 wide binary and a probable young [M4 + M4] + [T7 + T8] hierarchical quadruple

Benchmark brown dwarfs in wide binary systems are crucial for characterizing substellar objects and calibrating atmospheric and evolutionary models. However, brown dwarf benchmarks with subsolar metallicity, very cool temperatures, or suitability for dynamical mass measurements are rare, limiting our understanding across the full range of mass, age, and metallicity. We present the discovery of two new multiple systems containing T dwarf companions, identified through a targeted search using CatWISE2020 and Gaia catalogues. L 122-88 AB is a wide binary comprising a mildly metal-poor M2 dwarf and a T5 dwarf, separated by 215.6 arcsec at a distance of 33.106+/-0.014 pc. Atmospheric model fitting to the near infrared spectrum of L 122-88 A suggests a mildly metal-poor composition ([Fe/H] = -0.2). UPM J1040-3551 AB is a candidate hierarchical quadruple system at 25.283+/-0.013 pc, consisting of a likely astrometric binary of two M4 dwarfs and a probable unresolved spectral binary of T7 and T8 dwarfs, separated by 65.48 arcsec from the primary. The H-alpha emission detected in UPM J1040-3551 A indicates an age range of 0.3-2.0 Gyr. This age estimate suggests that the T8 component has a mass between 9 and 28 Jupiter masses, potentially classifying it as a planetary-mass object. These systems augment the sample of benchmark brown dwarfs, particularly in the underexplored regime of cool temperature, providing valuable opportunities for refining our understanding of substellar objects.

astro-ph.SR↗

arXiv2025

Ultrafast laser high-aspect-ratio extreme nanostructuring of glass beyond {\lambda}/100

The ultimate feature size is key in ultrafast laser material processing. A capacity to signiicantly exceed optical limits and to structure below 100nm is essential to advance ultrafast processing into the field of metamaterials. Such achievement requires to combine the control of optical near-fields and of material reactions, while preserving the exibility of long working distances, compatible with a mature laser process. Using sub-ps and ps non-diffractive Bessel beams, we demonstrate unprecedented feature sizes below a hundredth of the incident 1$\mu$m wavelength over an extended focus depth of tens of $\mu$m. Record features sizes, down to 7nm, result from self-generated near-field light components initiated by cavities induced by far-field radiation in a back-surface illumination geometry. This sustains the generation of more confined near-field evanescent components along the laser scan with nm pitch, perpendicular to the incident field direction, driving by local thermal ablation a super-resolved laser structuring process. The near-field pattern is replicated with high robustness, advancing towards a 10nm nanoscribing tool with a $\mu$m-sized laser pen. The process is controllable by the field orientation. The non-diffractive irradiation develops evanescent fields over the focusing length, resulting in a high aspect ratio trenching with nm section and $\mu$m depth. Higher energy doses trigger the self-organization of quasi-periodic patterns seeded by spatially modulated scattering, similarly to optical modelocking. A predictive multipulse simulation method validates the far-field-induced near-field electromagnetic scenario of void nanochannel growth and replication, indicating the processing range and resolution on the surface and in the depth.

physics.optics↗

arXiv2024

The Continuous Electron Beam Accelerator Facility at 12 GeV

This review paper describes the energy-upgraded CEBAF accelerator. This superconducting linac has achieved 12 GeV beam energy by adding 11 new high-performance cryomodules containing eighty-eight superconducting cavities that have operated CW at an average accelerating gradient of 20 MV/m. After reviewing the attributes and performance of the previous 6 GeV CEBAF accelerator, we discuss the upgraded CEBAF accelerator system in detail with particular attention paid to the new beam acceleration systems. In addition to doubling the acceleration in each linac, the upgrade included improving the beam recirculation magnets, adding more helium cooling capacity to allow the newly installed modules to run cold, adding a new experimental hall, and improving numerous other accelerator components. We review several of the techniques deployed to operate and analyze the accelerator performance, and document system operating experience and performance. In the final portion of the document, we present much of the current planning regarding projects to improve accelerator performance and enhance operating margins, and our plans for ensuring CEBAF operates reliably into the future. For the benefit of potential users of CEBAF, the performance and quality measures for beam delivered to each of the experimental halls is summarized in the appendix.

physics.acc-ph↗

arXiv2023

Development of a prototype superconducting radio-frequency cavity for conduction-cooled accelerators

The higher efficiency of superconducting radio-frequency (SRF) cavities compared to normal-conducting ones enables the development of high-energy continuous-wave linear accelerators (linacs). Recent progress in the development of high-quality Nb$_3$Sn film coatings along with the availability of cryocoolers with high cooling capacity at 4 K makes it feasible to operate SRF cavities cooled by thermal conduction at relevant accelerating gradients for use in accelerators. A possible use of conduction-cooled SRF linacs is for environmental applications, requiring electron beams with energy of $1 - 10$ MeV and 1 MW of power. We have designed a 915 MHz SRF linac for such an application and developed a prototype single-cell cavity to prove the proposed design by operating it with cryocoolers at the accelerating gradient required for 1 MeV energy gain. The cavity has a $\sim 3$ $\mu$m thick Nb$_3$Sn film on the inner surface, deposited on a $\sim4$ mm thick bulk Nb substrate and a bulk $\sim7$ mm thick Cu outer shell with three Cu attachment tabs. The cavity was tested up to a peak surface magnetic field of 53 mT in liquid He at 4.3 K. A horizontal test cryostat was designed and built to test the cavity cooled with three Gifford-McMahon cryocoolers. The rf tests of the conduction-cooled cavity, performed at General Atomics, achieved a peak surface magnetic field of 50 mT and stable operation was possible with up to 18.5 W of rf heat load. The peak frequency shift due to microphonics was 23 Hz. These results represent the highest peak surface magnetic field achieved in a conduction-cooled SRF cavity to date and meet the requirements for a 1 MeV energy gain.

physics.acc-ph↗

arXiv2021

Probing the Spatial Variation of the Inter-Valley Tunnel Coupling in a Silicon Triple Quantum Dot

Electrons confined in silicon quantum dots exhibit orbital, spin, and valley degrees of freedom. The valley degree of freedom originates from the bulk bandstructure of silicon, which has six degenerate electronic minima. The degeneracy can be lifted in silicon quantum wells due to strain and electronic confinement, but the "valley splitting" of the two lowest lying valleys is known to be sensitive to atomic-scale disorder. Large valley splittings are desirable to have a well-defined spin qubit. In addition, an understanding of the inter-valley tunnel coupling that couples different valleys in adjacent quantum dots is extremely important, as the resulting gaps in the energy level diagram may affect the fidelity of charge and spin transfer protocols in silicon quantum dot arrays. Here we use microwave spectroscopy to probe spatial variations in the valley splitting, and the intra- and inter-valley tunnel couplings ($t_{ij}$ and $t'_{ij}$) that couple dots $i$ and $j$ in a triple quantum dot (TQD). We uncover large spatial variations in the ratio of inter-valley to intra-valley tunnel couplings $t_{12}'/t_{12}=0.90$ and $t_{23}'/t_{23}=0.56$. By tuning the interdot tunnel barrier we also show that $t'_{ij}$ scales linearly with $t_{ij}$, as expected from theory. The results indicate strong interactions between different valley states on neighboring dots, which we attribute to local inhomogeneities in the silicon quantum well.

cond-mat.mes-hall↗

arXiv2020

Multi-metallic conduction cooled superconducting radio-frequency cavity with high thermal stability

Superconducting radio-frequency cavities are commonly used in modern particle accelerators for applied and fundamental research. Such cavities are typically made of high-purity, bulk Nb and are cooled by a liquid helium bath at a temperature of ~2 K. The size, cost and complexity of operating a particle accelerator with a liquid helium refrigerator makes the current cavity technology not favorable for use in industrial-type accelerators. We developed a multi-metallic 1.495~GHz elliptical cavity conductively cooled by a cryocooler. The cavity has a ~2 $\mu$m thick layer of Nb$_3$Sn on the inner surface, exposed to the rf field, deposited on a ~3 mm thick bulk Nb shell and a bulk Cu shell, of thickness $\geqslant 5$ mm deposited on the outer surface by electroplating. A bolt-on Cu plate 1.27 cm thick was used to thermally connect the cavity equator to the second stage of a Gifford-McMahon cryocooler with a nominal capacity of 2 W at 4.2 K. The cavity was tested initially in liquid helium at 4.3 K and reached a peak surface magnetic field of ~36 mT with a quality factor of $2\times 10^9$. The cavity cooled by the crycooler achieved a peak surface magnetic field of ~29 mT, equivalent to an accelerating gradient of 6.5 MV/m, and it was able to operate in continuous-wave with as high as 5 W dissipation in the cavity for 1 h without any thermal breakdown. This result represents a paradigm shift in the technology of superconducting accelerator cavities.

physics.ins-det↗

arXiv2018

Significant Excess of ElectronLike Events in the MiniBooNE Short-Baseline Neutrino Experiment

The MiniBooNE experiment at Fermilab reports results from an analysis of $\nu_e$ appearance data from $12.84 \times 10^{20}$ protons on target in neutrino mode, an increase of approximately a factor of two over previously reported results. A $\nu_e$ charged-current quasielastic event excess of $381.2 \pm 85.2$ events ($4.5 \sigma$) is observed in the energy range $200<E_\nu^{QE}<1250$~MeV. Combining these data with the $\bar \nu_e$ appearance data from $11.27 \times 10^{20}$ protons on target in antineutrino mode, a total $\nu_e$ plus $\bar \nu_e$ charged-current quasielastic event excess of $460.5 \pm 99.0$ events ($4.7 \sigma$) is observed. If interpreted in a two-neutrino oscillation model, ${\nu}_{\mu} \rightarrow {\nu}_e$, the best oscillation fit to the excess has a probability of $21.1\%$, while the background-only fit has a $\chi^2$ probability of $6 \times 10^{-7}$ relative to the best fit. The MiniBooNE data are consistent in energy and magnitude with the excess of events reported by the Liquid Scintillator Neutrino Detector (LSND), and the significance of the combined LSND and MiniBooNE excesses is $6.0 \sigma$. A two-neutrino oscillation interpretation of the data would require at least four neutrino types and indicate physics beyond the three neutrino paradigm.Although the data are fit with a two-neutrino oscillation model, other models may provide better fits to the data.

hep-ex↗

arXiv2018

First Measurement of Monoenergetic Muon Neutrino Charged Current Interactions

We report the first measurement of monoenergetic muon neutrino charged current interactions. MiniBooNE has isolated 236 MeV muon neutrino events originating from charged kaon decay at rest ($K^+ \rightarrow \mu^+ \nu_\mu$) at the NuMI beamline absorber. These signal $\nu_\mu$-carbon events are distinguished from primarily pion decay in flight $\nu_\mu$ and $\overline{\nu}_\mu$ backgrounds produced at the target station and decay pipe using their arrival time and reconstructed muon energy. The significance of the signal observation is at the 3.9$\sigma$ level. The muon kinetic energy, neutrino-nucleus energy transfer ($\omega=E_\nu-E_\mu$), and total cross section for these events is extracted. This result is the first known-energy, weak-interaction-only probe of the nucleus to yield a measurement of $\omega$ using neutrinos, a quantity thus far only accessible through electron scattering.

hep-ex↗

arXiv2014

Using L/E Oscillation Probability Distributions

This paper explores the use of $L/E$ oscillation probability distributions to compare experimental measurements and to evaluate oscillation models. In this case, $L$ is the distance of neutrino travel and $E$ is a measure of the interacting neutrino's energy. While comparisons using allowed and excluded regions for oscillation model parameters are likely the only rigorous method for these comparisons, the $L/E$ distributions are shown to give qualitative information on the agreement of an experiment's data with a simple two-neutrino oscillation model. In more detail, this paper also outlines how the $L/E$ distributions can be best calculated and used for model comparisons. Specifically, the paper presents the $L/E$ data points for the final MiniBooNE data samples and, in the Appendix, explains and corrects the mistaken analysis published by the ICARUS collaboration.

hep-ex↗

arXiv2013

Measurement of the Antineutrino Neutral-Current Elastic Differential Cross Section

We report the measurement of the flux-averaged antineutrino neutral current elastic scattering cross section ($dσ_{\bar νN \rightarrow \bar νN}/dQ^{2}$) on CH$_{2}$ by the MiniBooNE experiment using the largest sample of antineutrino neutral current elastic candidate events ever collected. The ratio of the antineutrino to neutrino neutral current elastic scattering cross sections and a ratio of antineutrino neutral current elastic to antineutrino charged current quasi elastic cross section is also presented.

hep-ex↗

arXiv2013

First Measurement of the Muon Anti-Neutrino Double-Differential Charged Current Quasi-Elastic Cross Section

The largest sample ever recorded of $\numub$ charged-current quasi-elastic (CCQE, $\numub + p \to \mup + n$) candidate events is used to produce the minimally model-dependent, flux-integrated double-differential cross section $\frac{d^{2}σ}{dT_μd\uz}$ for $\numub$ incident on mineral oil. This measurement exploits the unprecedented statistics of the MiniBooNE anti-neutrino mode sample and provides the most complete information of this process to date. Also given to facilitate historical comparisons are the flux-unfolded total cross section $σ(E_ν)$ and single-differential cross section $\frac{dσ}{d\qsq}$ on both mineral oil and on carbon by subtracting the $\numub$ CCQE events on hydrogen. The observed cross section is somewhat higher than the predicted cross section from a model assuming independently-acting nucleons in carbon with canonical form factor values. The shape of the data are also discrepant with this model. These results have implications for intra-nuclear processes and can help constrain signal and background processes for future neutrino oscillation measurements.

hep-ex↗

arXiv2013

Improved Search for $\bar \nu_\mu \rightarrow \bar \nu_e$ Oscillations in the MiniBooNE Experiment

The MiniBooNE experiment at Fermilab reports results from an analysis of $\bar \nu_e$ appearance data from $11.27 \times 10^{20}$ protons on target in antineutrino mode, an increase of approximately a factor of two over the previously reported results. An event excess of $78.4 \pm 28.5$ events ($2.8 \sigma$) is observed in the energy range $200<E_\nu^{QE}<1250$ MeV. If interpreted in a two-neutrino oscillation model, $\bar{\nu}_{\mu}\rightarrow\bar{\nu}_e$, the best oscillation fit to the excess has a probability of 66% while the background-only fit has a $\chi^2$-probability of 0.5% relative to the best fit. The data are consistent with antineutrino oscillations in the $0.01 < \Delta m^2 < 1.0$ eV$^2$ range and have some overlap with the evidence for antineutrino oscillations from the Liquid Scintillator Neutrino Detector (LSND). All of the major backgrounds are constrained by in-situ event measurements so non-oscillation explanations would need to invoke new anomalous background processes. The neutrino mode running also shows an excess at low energy of $162.0 \pm 47.8$ events ($3.4 \sigma$) but the energy distribution of the excess is marginally compatible with a simple two neutrino oscillation formalism. Expanded models with several sterile neutrinos can reduce the incompatibility by allowing for CP violating effects between neutrino and antineutrino oscillations.

hep-ex↗

arXiv2012

Dual baseline search for muon antineutrino disappearance at 0.1 eV^2 < Δm^2 < 100 eV^2

The MiniBooNE and SciBooNE collaborations report the results of a joint search for short baseline disappearance of \bar{ν_μ} at Fermilab's Booster Neutrino Beamline. The MiniBooNE Cherenkov detector and the SciBooNE tracking detector observe antineutrinos from the same beam, therefore the combined analysis of their datasets serves to partially constrain some of the flux and cross section uncertainties. Uncertainties in the ν_μ background were constrained by neutrino flux and cross section measurements performed in both detectors. A likelihood ratio method was used to set a 90% confidence level upper limit on \bar{ν_μ} disappearance that dramatically improves upon prior limits in the Δm^2=0.1-100 eV^2 region.

hep-ex↗

arXiv2012

A Combined $\nu_\mu \to \nu_e$ and $\bar\nu_\mu \to \bar\nu_e$ Oscillation Analysis of the MiniBooNE Excesses

The MiniBooNE experiment at Fermilab reports results from an analysis of the combined $\nu_e$ and $\bar \nu_e$ appearance data from $6.46 \times 10^{20}$ protons on target in neutrino mode and $11.27 \times 10^{20}$ protons on target in antineutrino mode. A total excess of $240.3 \pm 34.5 \pm 52.6$ events ($3.8 \sigma$) is observed from combining the two data sets in the energy range $200<E_\nu^{QE}<1250$ MeV. In a combined fit for CP-conserving $\nu_\mu \rightarrow \nu_e$ and $\bar{\nu}_{\mu}\rightarrow\bar{\nu}_e$ oscillations via a two-neutrino model, the background-only fit has a $\chi^2$-probability of 0.03% relative to the best oscillation fit. The data are consistent with neutrino oscillations in the $0.01 < \Delta m^2 < 1.0$ eV$^2$ range and with the evidence for antineutrino oscillations from the Liquid Scintillator Neutrino Detector (LSND).

hep-ex↗

arXiv2012

Low temperature laser scanning microscopy of a superconducting radio-frequency cavity

An apparatus was developed to obtain, for the first time, 2D maps of the surface resistance of the inner surface of an operating superconducting radio-frequency niobium cavity by a low-temperature laser scanning microscopy technique. This allows identifying non-uniformities of the surface resistance with a spatial resolution of about one order of magnitude better than with earlier methods and surface resistance resolution of ~ 1 micro-Ohm at 3.3 GHz. A signal-to-noise ratio of about 10 dB was obtained with 240 mW laser power and 1 Hz modulation frequency. The various components of the apparatus, the experimental procedure and results are discussed in detail in this contribution.

cond-mat.supr-con↗

arXiv2011

Dual baseline search for muon neutrino disappearance at 0.5 eV^2 < Δm^2 < 40 eV^2

The SciBooNE and MiniBooNE collaborations report the results of a ν_μdisappearance search in the Δm^2 region of 0.5-40 eV^2. The neutrino rate as measured by the SciBooNE tracking detectors is used to constrain the rate at the MiniBooNE Cherenkov detector in the first joint analysis of data from both collaborations. Two separate analyses of the combined data samples set 90% confidence level (CL) limits on ν_μdisappearance in the 0.5-40 eV^2 Δm^2 region, with an improvement over previous experimental constraints between 10 and 30 eV^2.

hep-ex↗

arXiv2011

Improved Parameterization of $K^+$ Production in p-Be Collisions at Low Energy Using Feynman Scaling

This paper describes an improved parameterization for proton-beryllium production of secondary $K^{+}$ mesons for experiments with primary proton beams from 8.89 to 24 GeV. The parameterization is based on Feynman scaling in which the invariant cross section is described as a function of $x_{F}$ and $p_{T}$. This method is theoretically motivated and provides a better description of the energy dependence of kaon production at low beam energies than other parameterizations such as the commonly used "Modified Sanford-Wang" model. This Feynman scaling parameterization has been used for the simulation of the neutrino flux from the Booster Neutrino Beam (BNB) at Fermilab and has been shown to agree with the neutrino interaction data from the SciBooNE experiment. This parameterization will also be useful for future neutrino experiments with low primary beam energies, such as those planned for the Project X accelerator.

hep-ex↗