arXiv subjects

Han Li

Publications and source records attributed to Han Li.

At least 37 records · Page 2Linked to original sources

arXiv2026

Development of Small-pitch, Ultra-thin 3D Silicon Sensors at USTC

We report on the development of 3D silicon sensors at the University of Science and Technology of China (USTC). The sensor involves columnar electrodes (5 um in diameter) of both doping types, etched from the same wafer side. The p+ electrodes pass through the epitaxial wafer, whereas the n+ electrodes stop at a short distance from the opposite side of the epitaxial wafer. Based on the current processing capacity, the sensors feature an ultra-thin active substrate (50 um) and a small pixel size of 50 um x 50 um or 25 um x 25 um. This R&D project aims to establish a sensor technology to simultaneously measure position and time information at the single-pixel level. The first fabrication run, using a merged layout containing both pixel sizes, has been completed. The design and fabrication of the sensors, followed by their characterization, including Current-Voltage (I-V) measurements and Sr-90 beta source measurements, are reported in this paper.

physics.ins-det↗

arXiv2026

Assessing the impact of climate change and rising temperatures on life insurance portfolios

Climate change may materially affect long-term life insurance liabilities by altering both the level and seasonal pattern of mortality. This article develops a multi-population mortality framework that combines a Hermite spline model with a distributed lag non-linear model to capture age-, region-, and temperature-specific mortality effects. We apply the framework to mortality and temperature data from 15 Spanish NUTS-2 regions and project future mortality under three shared socioeconomic pathway (SSP) scenarios. We then assess the implications for a hypothetical whole life insurance portfolio through expected death-benefit payments and portfolio profit and loss. The results reveal an important seasonal offset: warmer conditions reduce expected payoffs during winter periods but increase them during summer periods, with these effects becoming more pronounced under more severe climate scenarios and for policies issued in later years. Over longer horizons, adverse summer mortality effects become increasingly important. The portfolio analysis further shows that climate-related mortality risk can materially increase the dispersion and downside risk of portfolio outcomes, particularly under SSP5-8.5. These findings highlight the importance of incorporating temperature-related mortality effects into long-term life insurance liability projections and risk assessment.

stat.AP↗

arXiv2026

KUAISHOU Explorer LLM-Rec Challenge 2026: Reasoning Generative Recommendation

Generative recommendation, has been attracted a surge of attentions in industrial and academic research community, towards to build more smart system to build next-generation recommender. Under the significant developing wave of large language model, our team have been developed Semantic ID based OneRec/OneRec-V2. These models have been widely deployed in production and demonstrate the scaling potential of the autoregressive next-item prediction paradigm for industrial recommender systems. Building on the success of OneRec, we further explored a series of models, including OneRec-Think, OpenOneRec, and OneReason, that connect item Semantic IDs with natural language in a unified representation space and seek to unlock the potential of natural-language chain-of-thought (CoT) reasoning for recommendation. However, our preliminary works found that introducing reasoning CoT does not always improve the recommendation performance. To address this issue, OneReason strengthens the semantic alignment between items and language, introduces structured template-based supervision for interest reasoning, and applies advanced reinforcement learning techniques to make reasoning more beneficial to recommendation. As a frontier topic to building recommendation foundation models, we believe this topic has significant research value and hope to encourage more researchers to explore it together. To this end, together with the SIGIR 2026 community, we organized the KUAISHOU Explorer LLM-Rec Challenge 2026: Reasoning Generative Recommendation.

cs.IR↗

arXiv2026

SimTrace: Grounded Multimodal User Trajectories Generation for Online User Modeling

Virtual clients offer a cost-effective approach to support applications such as A/B testing, recommender system development, and interface evaluation. However, building them requires access to large-scale, semantically faithful, fine-grained online user trajectories. These data are difficult to obtain because proprietary logs are subject to privacy restrictions and small businesses often lack sufficient traffic. Consequently, existing public datasets either abstract away fine-grained user interaction details or preserve rich context but remain platform-specific and small-scale. To address this gap, we propose SimTrace, a framework that generates faithful, fine-grained synthetic multimodal clickstreams through a computer-use client agent that is grounded in real user trajectories and the given web environment. SimTrace anonymizes real interactions and constructs a simulated twin of the given web environment, then uses both to generate synthetic interaction trajectories. Each action is paired with its corresponding web observations and user context, yielding a shareable alternative to confidential logs for developing computer-use agent-style virtual clients. We apply SimTrace to an e-commerce setting and evaluate both its fidelity and downstream utility. SimTrace outperforms competing baselines on 7 out of 8 fidelity metrics. Models trained on synthetic data achieve performance comparable to those trained on real data on downstream tasks such as purchase prediction and recommendation. For next action prediction task, augmenting real data with synthetic data further improves accuracy by 11.0% relative to training on real data alone. We release SimTrace as an open-source package to facilitate research on online user behavior modeling.

cs.AI↗

arXiv2026

Sprout: Building Dynamic Memory While Reasoning for Agentic Video Understanding

Long video understanding relies on video memory to overcome the context limits of multimodal large language models. Existing methods follow a build-then-reasoning pipeline: memory is built offline for the entire video, then reasoned over as a static source. In practice a long video is shared by several questions, and this pipeline is costly at both ends: with few questions, building memory for the whole video costs far more than answering them; with many questions, the memory is never updated, so what is learned while answering questions is lost to the next question. To alleviate these, we introduce Sprout, an agentic framework that builds memory while reasoning: a temporal tree that sprouts detailed nodes as questions are answered. The agent watches the video segment by segment at a low frame rate, stopping when the current question can be answered, remembers each segment as a coarse node of the tree, and revisits key intervals at a higher frame rate to refine the tree with the recovered details. Once a segment is recorded as text, its video input is removed from the context history, while the original video remains reachable through the video tools. The memory tree and prior question--answer records persist across questions, so the memory is online and dynamic: built from the first question onward and updated by every question thereafter. We find that replacing accumulated video inputs with textual memory substantially reduces context usage while maintaining accuracy, with slight improvements in some settings. Across benchmarks on three models, Sprout achieves competitive or improved accuracy relative to representative offline memory methods, with no upfront construction stage and lower context cost per question.

cs.CV↗

arXiv2026

Lngram v2: Latent N-Gram Memory with Interpretable Discrete Representations

Transformers lack a native lookup mechanism, requiring repeated dense computation to recognize and reuse local static patterns. Lngram v1 introduces tokenizer-independent conditional memory through discrete latent n-gram addressing, but its memory capacity is coupled with the backbone width, limiting scalability due to high parameter and activation costs. We propose Lngram v2, which decouples the number of routes, memory dimension, and backbone width, and introduces a context-aware grouped-query attention readout to scale memory capacity independently. A zero-value Sink and counterfactual surrogate gradients further improve readout selectivity and routing trainability while preserving hard discrete addressing. Experiments across vision--language models (VLMs) of different scales show consistent improvements, including successful scaling to a 30B-parameter model. Compared with Lngram v1, Lngram v2 substantially reduces both total and activated memory parameters while maintaining or improving language modeling performance. Further analysis shows that its discrete IDs preserve substantial semantic structure of continuous hidden states, enabling semantic recovery from IDs alone and stable ID--semantic associations across datasets. These results establish Lngram v2 as an efficient and scalable latent conditional memory mechanism whose discrete addresses also provide a structured interface for analyzing internal model representations.

cs.CL↗

arXiv2026

Scaling Articulated Rationales for MLLM-based Recommendation

We presented SARA, an industrial framework that transforms sparse articulated user rationales into scalable recommendation signals. Its data engine curates questionnaire responses into SARA-HQ, providing explicit preference supervision for aligning SARA-7B through SFT and Quality-Refining DPO. This alignment extends rationale generation from $86{,}564$ questionnaire-covered authors to the full $10$M-author space. SARA-Ranker translates the generated positive and negative rationales into features for user--author interaction modeling and negative-feedback history modeling, connecting articulated reasons to production ranking. Evaluation on unseen authors demonstrates that SARA-7B generates more specific, relevant, and grounded rationales than the evaluated general-purpose MLLMs. On top of a strong industrial ranking baseline with multimodal features, separate online A/B tests show that positive-rationale integration increases watch time by $0.99\%$, while negative-rationale integration reduces Hate feedback by $8.16\%$. Daily refresh and more than $30$ days of production deployment further demonstrate the operational feasibility of the approach. These findings establish articulated rationales as a useful complement to behavioral and content signals, and demonstrate a practical role for MLLMs in scaling sparse human explanations into preference information that improves industrial recommendation.

cs.IR↗

arXiv2026

DeepSeek-V4.1-Flash: Pushing the Limits of KV Cache Compression

The widespread adoption of long-horizon agents has made model workloads increasingly input-heavy. Although prior work has substantially reduced the cost of long-context computation, prefill remains computationally expensive, and large KV caches continue to strain HBM and SSD capacity and data-transfer bandwidth. Together, these compute, storage, and bandwidth demands constitute the primary bottleneck to further lowering deployment costs. To address this challenge, we introduce DeepSeek-V4.1-Flash, a multimodal Mixture-of-Experts (MoE) model with 552B backbone parameters and support for contexts of up to one million tokens. With its Causal Encoder-Decoder (CED) architecture, the model activates 16B parameters per token during decode but only 8B parameters during prefill, substantially improving cost efficiency for agentic workloads. To push the limits of KV cache compression, DeepSeek-V4.1-Flash combines cross-layer KV cache reuse in Compressed Sparse Attention 2 (CSA2) with FP4 KV caching. These designs reduce its global KV cache footprint (always in HBM) to 890 bytes per token, roughly 1/4 of the corresponding footprint of DeepSeek-V4-Flash. Further, through a dedicated deployment optimization known as SWA Bounded Replay, DeepSeek-V4.1-Flash reduces its persistent KV cache footprint (always on SSD or in host memory) to roughly 1/8 of that of DeepSeek-V4-Flash. Despite its much smaller KV cache footprint, the model delivers substantially better performance than the baseline. In addition, we streamline the DeepSeek-V4 architecture and introduce several efficient architectural extensions. We pretrain DeepSeek-V4.1-Flash on a multimodal corpus comprising 45T tokens and conduct comprehensive post-training, yielding strong performance across diverse text-based and multimodal agentic scenarios. Model checkpoints are available at https://huggingface.co/deepseek-ai/DeepSeek-V4.1-Flash.

cs.CL↗

arXiv2026

On Sequence Reconstruction Problem for q-ary Deletion Channels

The sequence reconstruction problem for $q$-ary deletion channels, introduced by Levenshtein in 2001, concerns the minimum number of channels required to uniquely recover a transmitted sequence when each channel introduces exactly $t$ deletions. Combinatorially, it is equivalent to determining $N_q(n,d,t)$, the maximum intersection size of two $t$-deletion balls with centers at Levenshtein distance at least $d$, for $q$-ary sequences of length $n$ over the alphabet $Σ_q=\{0,1,\dots,q-1\}$. Levenshtein solved the uncoded case $N_q(n,1,t)$ for all $n\ge t$; subsequently, Gabrys and Yaakobi determined $N_2(n,2,t)$, and Wang et al. extended the result to $N_3(n,2,t)$. In this paper, we study the problem for $q$-ary sequences under minimum Levenshtein distance $d=2$ with channels that introduce exactly $t$ deletions. We determine the exact value of $N_q(n,2,t)$ for all $t\ge 2, q\geq 4$, and for sufficiently large $n$, and construct explicit pairs of sequences attaining the maximum intersection. Furthermore, for each $q\ge3$, we characterize all extremal sequence pairs. In particular, if the intersection size matches the first two terms of $N_q(n,2,t)$, then the two center sequences must contain, at the same positions, length-5 blocks of the forms $(a,b,c,a,b)$ and $(b,a,c,b,a)$ for some distinct $a,b,c\inΣ_q$; for $t\ge q+2$, the exact maximum $N_q(n,2,t)$ is attained precisely by $2q!$ unordered pairs of sequences with a specific block structure. Asymptotically, we prove that for $q\ge 4$ and $t\ge 2$, \[ N_q(n,2,t)=\frac{6}{(t-2)!}n^{t-2}-\frac{3t+13}{(t-3)!}n^{t-3}+\frac{3t^2+25t+64}{4(t-4)!}n^{t-4}+O(n^{t-5}). \] Moreover, $N_q(n,2,t)$ and $N_{q-1}(n,2,t)$ share their first $q-1$ terms, and for $t\ge q$ the coefficient of $n^{t-q}$ in their difference is $\frac{6t-6q+5}{(t-q)!}$.

cs.IT↗

arXiv2026

Counteraction-Aware Multi-Teacher On-Policy Distillation for General Capability Recovery with Domain Preservation

Domain specialization can improve LLM behavior, but often weakens the general capabilities inherited from the original model. Recent Multi-Teacher On-Policy Distillation (MOPD) pipelines recover model capabilities by supervising student-generated trajectories with teacher feedback, but typically assume teacher-aligned prompt coverage, requiring prompts to match the teachers' training distributions. This assumption is difficult to satisfy when the general teacher is an open-source model whose post-training data are unknown. Instead of attempting to reconstruct this hidden distribution, we study general capability recovery with readily available proxy general prompts. We identify two failure modes of vanilla MOPD in this incomplete-coverage situation: recovery-preservation counteraction from mixing conflicting recovery and preservation gradients, and weak-signal flattening from uniformly averaging samples with unequal correction demand. We propose \textbf{Counteraction-Aware Multi-Teacher On-Policy Distillation} (\textbf{CaMOPD}), which addresses these issues with decoupled alternating training and gap-based sample selection. CaMOPD allocates dedicated updates to general recovery, periodically performs domain-preservation updates, and selects samples with larger averaged token-level teacher-student log-probability gaps to concentrate correction signals. Across role-play dialogue and medical reasoning QA scenarios, CaMOPD outperforms all baselines in general capability recovery while maintaining domain-specific behavior. Gradient coherence analyses further support the intended effect of CaMOPD in producing more coherent correction signals.

cs.AI↗

arXiv2026

ClinConsensus: A Physician-Calibrated Benchmark for Evaluating Clinical Rubric Coverage in Chinese Medical LLMs

Open-ended medical LLM evaluation remains weakly grounded in physician-calibrated coverage of clinically relevant response criteria, especially in localized clinical settings. We introduce \textsc{ClinConsensus}, a Chinese medical benchmark of 2{,}500 expert-curated cases spanning 36 specialties, 12 task themes, multiple difficulty levels, and lay-facing versus professional-facing settings. Each case is paired with 30 case-specific binary rubric criteria. To evaluate whether responses satisfy enough physician-authored criteria, we propose \emph{Clinician-Anchored Coverage Score} (CACS), a physician-calibrated threshold metric instantiated at $k=10$, and develop a dual-judge framework combining a GPT-5.1 grader with a physician-supervised Qwen3-8B judge. Evaluating 11 frontier LLMs, we find a persistent coverage gap: Rubric Accuracy ranges from 39.6\% to 52.1\%, whereas CACS@10 ranges from 17.8\% to 32.9\%, leaving a 19.2--21.9 point gap across models. Stratified analyses further reveal substantial variation across reasoning, evidence use, structured extraction, medication instructions, follow-up, and dialogue register. These results suggest that medical LLM evaluation should measure thresholded, rubric-grounded clinical coverage rather than average partial correctness.

cs.CL↗

arXiv2026

WeAgent-MMGenEdit: A Full-Stack Recipe for Multimodal Agentic Image Generation and Editing

Image generation and editing models have advanced rapidly, yet remain unreliable when prompts require external world knowledge. Bounded and long-tail parametric knowledge prevents direct or reason-then-generate approaches from recovering the required facts and visual appearances. Existing agentic generation and editing methods mitigate this limitation with retrieval tools, yet remain constrained by insufficient visual verification, overloaded policy models, and weak integration of retrieved textual and visual evidence. To address these limitations, we present WeAgent-MMGenEdit, a full-stack recipe including a multimodal harness, a scalable data construction pipeline, a comprehensive benchmark, and post-training methods for the agent policy and image backend. We first introduce WeAgent-Harness, a multimodal runtime with persistent evidence management and dedicated verification and integration tools that organize retrieved multimodal evidence into a dense carrier. Upon this, we develop a scalable pipeline for prompt synthesis and agentic trajectory collection, yielding 23K supervised trajectories and 14.7K RL tasks with three-layer verifiable checklists. We further introduce WeBench-MMGenEdit, a bilingual benchmark covering both knowledge-intensive image generation and multi-image editing. Finally, a two-sided post-training recipe based on SFT and RL improves the agent policy and image backend. Together, WeAgent-MMGenEdit enables a 30B-total/3B-active policy to outperform similarly sized policy models and approach the performance of a 1T-parameter agent.

cs.CV↗

arXiv2026

Large Language Models for HVAC Operations in Building Energy Systems: A Critical Review of Methods, Applications, and Deployment Readiness

Building automation systems generate rich sensor data yet remain insight-poor because heterogeneous point naming, missing metadata, and fragmented documentation obstruct their operational use. This systematic review analyses and codes 66 peer-reviewed studies on large language models (LLMs) for HVAC operations published between 2023 and March 2026. Each study is classified across five application families and three LLM method families and assessed for evidence realism, deployment readiness, and the responsibility boundary between the LLM and physical HVAC decisions. The corpus is concentrated in building energy modelling (BEM, 32 of 66 papers), while load forecasting remains too sparse for subfield-level conclusions. Only four studies reach pilot-level evidence, and none reports sustained operational deployment. No study was classified as ready-now for industry adoption; three were near-term and 63 research-only. Nevertheless, several bounded, human-in-the-loop uses merit near-term trials, including point-name normalisation, document-grounded operator support, BEM workflow assistance, and advisory interfaces around physics-based controllers. Conventional machine learning (ML), model predictive control (MPC), reinforcement learning (RL) and ontology-based tools remain more adopted for high-frequency control, short-horizon numerical forecasting, and well-posed ontology mapping, while autonomous agentic operation and unvalidated occupant proxies remain research-stage. Current evidence therefore supports LLMs primarily as semantic and workflow layers rather than autonomous HVAC controllers. Future work should prioritise field-validated benchmarks, orchestration evaluation under operational constraints, and LLM-MPC/RL architectures with bounded latency and verifiable safety properties.

cs.AI↗

arXiv2026

Joint Alignment and Distillation for Video Generation via Sample-Guided Distribution Matching

Aligning video generative models to human preferences heavily relies on Reinforcement Learning (RL), which suffers from extensive computational overhead. Existing workflows typically treat RL and distillation as disconnected stages: applying RL before distillation incurs prohibitive computational costs, whereas applying RL after distillation frequently leads to model collapse. To overcome these limitations, we propose a unified, single-stage optimization framework grounded in Distribution Matching (DM). In the standard DM framework, distillation updates the model via a gradient direction that minimizes the gap between the real and fake models, guiding generations toward clarity and high fidelity. Building upon this, we introduce DM-Align, which derives a complementary gradient direction to guide the model toward human-preferred samples. Inspired by DPO and GRPO, our method leverages the distributional gap -- formulated from either preference pairs or intra-group exploration -- to directly construct this preference-guided gradient. By synergizing these two gradient directions, our approach eliminates the need for multi-step reward evaluation and complex ODE-SDE conversions inherent in traditional RL. Comprehensive experiments across multiple foundational video models demonstrate that this sample-guided framework robustly enhances both distillation quality and preference alignment, consistently outperforming both standalone variants and sequential two-stage pipelines.

cs.CV↗

arXiv2026

Geometry-Grounded Unified 3D Perception for Autonomous Driving

Camera-based autonomous driving perception requires a shared representation that preserves metric 3D structure across synchronized multi-camera streams. However, existing image-based frameworks often rely on backbones pretrained for semantic recognition, and introduce 3D geometry through downstream task-specific modules. As a result, their shared representations may fail to preserve explicit metric geometry and consistent 3D scene structure. In this paper, we present a Geometry-grounded Unified 3D Perception (GeoUP) framework that adapts the reconstruction-oriented latent of VGGT to calibrated, streaming multi-camera driving scenes. GeoUP factorizes cross-image interaction into self, temporal, and view attention to capture structurally distinct temporal and cross-view correspondences. It further injects calibration-aware raymap encodings to provide metric scale and camera geometry. The resulting geometry-grounded latent is decoded for metric depth estimation, 3D object detection, and semantic occupancy prediction, corresponding to surface-, instance-, and volume-level readouts of the same 3D scene. Through joint multi-task and multi-dataset training, GeoUP effectively leverages heterogeneous annotations and generalizes across diverse sensor configurations and perception ranges. Extensive experiments on nuScenes, Argoverse 2, Waymo, KITTI, and DDAD demonstrate that GeoUP achieves SOTA performance across detection, occupancy, and depth estimation. These results validate the effectiveness of geometry-grounded representations for unified 3D driving perception.

cs.CV↗

arXiv2026

SatDL: Jointly Optimizing Data Redistribution and Training for Satellite-Based Distributed Learning

Satellite-based distributed learning promises to train machine-learning models directly in orbit using massive, globally dispersed sensor data, thereby avoiding large-scale data downloads to ground servers. However, training convergence is significantly slowed by severe non-IID data, specifically label imbalance, as each satellite observes different geographic regions with distinct labels. This imbalance extends training duration and increases energy consumption for solar-powered satellites. Existing approaches either fully redistribute data to enforce IID conditions - accelerating convergence but incurring substantial communication delays - or avoid redistribution entirely by modifying local learning algorithms to mitigate the impact of label imbalance, which, however, still prolong training and increase energy use. Both extremes result in excessive total end-to-end learning time (data-transfer delay plus training time) and thus elevated onboard energy consumption. We present SatDL, a data-redistribution framework designed to minimize total end-to-end learning time. At its core, SatDL develops a Distributor-Critic framework that jointly models and optimizes data-transfer delay and training time. Evaluations through trace-driven simulations of a 1,584-satellite Starlink constellation and hardware emulations using NVIDIA Jetson and A100 GPUs across five datasets show SatDL reduces total end-to-end learning time by up to 18.6% and onboard energy consumption by 12.23-88.00%, while maintaining inference accuracy within a few percentage points of state-of-the-art baselines.

cs.DC↗

arXiv2026

WeAgent-MMSearch: Native Text-Vision Interaction for Multimodal Search Agents

Multimodal search agents extend parametric knowledge with newly emerging and long-tail evidence from the open web. Yet many existing agentic search environments often expose retrieved evidence only as text and omit tool-returned images from subsequent context, reducing visually grounded trajectories to text-only reasoning. Long-horizon interaction also compounds tool-call, response-length, timeout, and budget failures, which can discard salvageable trajectories, waste rollout computation, and disturb policy updates. To address these issues, we introduce WeAgent-Harness, a multimodal agentic harness that supports native text-vision interaction and runtime recovery. Retrieved images receive persistent disk references, allowing the model to inspect, process, and cite them throughout the trajectory. Based on this harness, we develop WeAgent-MMSearch, an integrated system spanning data construction, agentic post-training, and multimodal rollout. For data construction, a strong MLLM uses WeAgent-Harness to discover, synthesize, and verify MMSearch-style tasks and collect expert trajectories. During post-training, our Failure-Aware GSPO (FA-GSPO) recovers salvageable abnormal rollouts and filters invalid ones to improve bounded multimodal planning and search. We also introduce VisTarget-Bench, a 150-task human-verified benchmark that pairs each question with a held-out target image, distinguishing image-retrieval failures from visual-perception failures. Evaluation on VisTarget-Bench and seven public benchmarks shows that agentic post-training improves the average score by 19.22 points, enabling our model to outperform similarly sized open-source models and rival models with roughly ten times its parameter count.

cs.AI↗

arXiv2026

GUIDE: Generative Unsupervised Chinese Query Correction via Phonetic and Visual Shared-ID Encoding

Chinese query correction (CQC) is important for search and query recommendation on content platforms, but supervised methods rely on large annotated correction pairs that are costly to maintain as query vocabularies evolve. Unsupervised correction with language models is attractive, yet in the short-query setting, unconstrained generation often over-corrects ambiguous inputs toward high-frequency phrases, causing intent drift. We propose \textsc{GUIDE}, a generative unsupervised framework for CQC based on a confuse-then-clarify paradigm. \textsc{GUIDE} encodes phonetically or visually confusable characters with shared-IDs and reconstructs the original query with an encoder--decoder architecture, which constrains correction to plausible confusion neighborhoods while learning from unlabeled query streams. A time-decayed, query-frequency-weighted objective further supports adaptation to rapidly changing query vocabularies. Experiments on \textit{QSpell 250K} and a large-scale real-world dataset (\textit{KwaiSearch}) show that \textsc{GUIDE} consistently outperforms strong baselines, while online A/B testing further confirms gains in correction quality and downstream engagement.

cs.CL↗