arXiv subjects

Haruki Nishimura

Publications and source records attributed to Haruki Nishimura.

18 recordsLinked to original sources

arXiv2026

The Gaussian Is Enough: Flow-Matching Priors Do Not Help When Fine-Tuning Large Behavior Models

Modern robot imitation learning increasingly relies on generative policies based on diffusion or flow-matching models, which generate actions by transforming samples from a prior distribution. A key question is whether the choice of prior matters. Replacing the standard Gaussian with a closer-to-target, non-Gaussian prior has been shown to substantially improve performance when training from scratch. A natural next step is to ask whether these gains transfer to fine-tuning pretrained Large Behavior Models (LBMs) such as LBM 1.0, $π_{0.5}$, and GR00T~N1.5, where one might expect even larger gains. Surprisingly, we find that this is not the case, except possibly at very low fine-tuning data fractions. Across over 100K simulation rollouts spanning all three aforementioned LBMs on 40+ tasks in two simulation platforms, and 1250 hardware rollouts on five bimanual manipulation tasks, non-Gaussian priors that are demonstrably closer to the target yield statistically indistinguishable or worse fine-tuning performance than a standard Gaussian prior. Diagnostic analyses suggest why: fine-tuned imitation learning policies converge to similar action predictions across priors, despite their fine-tuned encoder embeddings diverging substantially from the pretrained embeddings and each other. A learning-rate ablation further confirms that encoder training is the dominant factor in fine-tuning performance, substantially outweighing the effect of prior choice. We conclude with concrete directions for future research on when and why learned priors might still matter in fine-tuning. Project page: https://cxu-tri.github.io/non_gaussian_FT/

cs.RO↗

arXiv2026

STITCH-OPE: Trajectory Stitching with Guided Diffusion for Off-Policy Evaluation

Off-policy evaluation (OPE) estimates the performance of a target policy using offline data collected from a behavior policy, and is crucial in domains such as robotics or healthcare where direct interaction with the environment is costly or unsafe. Existing OPE methods are ineffective for high-dimensional, long-horizon problems, due to exponential blow-ups in variance from importance weighting or compounding errors from learned dynamics models. To address these challenges, we propose STITCH-OPE, a model-based generative framework that leverages denoising diffusion for long-horizon OPE in high-dimensional state and action spaces. Starting with a diffusion model pre-trained on the behavior data, STITCH-OPE generates synthetic trajectories from the target policy by guiding the denoising process using the score function of the target policy. STITCH-OPE proposes two technical innovations that make it advantageous for OPE: (1) prevents over-regularization by subtracting the score of the behavior policy during guidance, and (2) generates long-horizon trajectories by stitching partial trajectories together end-to-end. We provide a theoretical guarantee that under mild assumptions, these modifications result in an exponential reduction in variance versus long-horizon trajectory diffusion. Experiments on the D4RL and OpenAI Gym benchmarks show substantial improvement in mean squared error, correlation, and regret metrics compared to state-of-the-art OPE methods.

cs.RO↗

arXiv2026

VLA Foundry: A Unified Framework for Training Vision-Language-Action Models

We present VLA Foundry, an open-source framework that unifies LLM, VLM, and VLA training in a single codebase. Most open-source VLA efforts specialize on the action training stage, often stitching together incompatible pretraining pipelines. VLA Foundry instead provides a shared training stack with end-to-end control, from language pretraining to action-expert fine-tuning. VLA Foundry supports both from-scratch training and pretrained backbones from Hugging Face. To demonstrate the utility of our framework, we train and release two types of models: the first trained fully from scratch through our LLM-->VLM-->VLA pipeline and the second built on the pretrained Qwen3-VL backbone. We evaluate closed-loop policy performance of both models on LBM Eval, an open-data, open-source simulator. We also contribute usability improvements to the simulator and the STEP analysis tools for easier public use. In the nominal evaluation setting, our fully-open from-scratch model is on par with our prior closed-source work and substituting in the Qwen3-VL backbone leads to a strong multi-task table top manipulation policy outperforming our baseline by a wide margin. The VLA Foundry codebase is available at https://github.com/TRI-ML/vla_foundry and all multi-task model weights are released on https://huggingface.co/collections/TRI-ML/vla-foundry. Additional qualitative videos are available on the project website https://tri-ml.github.io/vla_foundry.

cs.RO↗

arXiv2026

Beyond Binary Success: Sample-Efficient and Statistically Rigorous Robot Policy Comparison

Generalist robot manipulation policies are becoming increasingly capable, but are limited in evaluation to a small number of hardware rollouts. This strong resource constraint in real-world testing necessitates both more informative performance measures and reliable and efficient evaluation procedures to properly assess model capabilities and benchmark progress in the field. This work presents a novel framework for robot policy comparison that is sample-efficient, statistically rigorous, and applicable to a broad set of evaluation metrics used in practice. Based on safe, anytime-valid inference (SAVI), our test procedure is sequential, allowing the evaluator to stop early when sufficient statistical evidence has accumulated to reach a decision at a pre-specified level of confidence. Unlike previous work developed for binary success, our unified approach addresses a wide range of informative metrics: from discrete partial credit task progress to continuous measures of episodic reward or trajectory smoothness, spanning both parametric and nonparametric comparison problems. Through extensive validation on simulated and real-world evaluation data, we demonstrate up to 70% reduction in evaluation burden compared to standard batch methods and up to 50% reduction compared to state-of-the-art sequential procedures designed for binary outcomes, with no loss of statistical rigor. Notably, our empirical results show that competing policies can be separated more quickly when using fine-grained task progress than binary success metrics.

cs.RO↗

arXiv2026

Impact of Different Failures on a Robot's Perceived Reliability

Robots fail, potentially leading to a loss in the robot's perceived reliability (PR), a measure correlated with trustworthiness. In this study we examine how various kinds of failures affect the PR of the robot differently, and how this measure recovers without explicit social repair actions by the robot. In a preregistered and controlled online video study, participants were asked to predict a robot's success in a pick-and-place task. We examined manipulation failures (slips), freezing (lapses), and three types of incorrect picked objects or place goals (mistakes). Participants were shown one of 11 videos -- one of five types of failure, one of five types of failure followed by a successful execution in the same video, or a successful execution video. This was followed by two additional successful execution videos. Participants bet money either on the robot or on a coin toss after each video. People's betting patterns along with a qualitative analysis of their survey responses highlight that mistakes are less damaging to PR than slips or lapses, and some mistakes are even perceived as successes. We also see that successes immediately following a failure have the same effect on PR as successes without a preceding failure. Finally, we show that successful executions recover PR after a failure. Our findings highlight which robot failures are in higher need of repair in a human-robot interaction, and how trust could be recovered by robot successes.

cs.RO↗

arXiv2026

A Systematic Study of Data Modalities and Strategies for Co-training Large Behavior Models for Robot Manipulation

Large behavior models have shown strong dexterous manipulation capabilities by extending imitation learning to large-scale training on multi-task robot data, yet their generalization remains limited by the insufficient robot data coverage. To expand this coverage without costly additional data collection, recent work relies on co-training: jointly learning from target robot data and heterogeneous data modalities. However, how different co-training data modalities and strategies affect policy performance remains poorly understood. We present a large-scale empirical study examining five co-training data modalities: standard vision-language data, dense language annotations for robot trajectories, cross-embodiment robot data, human videos, and discrete robot action tokens across single- and multi-phase training strategies. Our study leverages 4,000 hours of robot and human manipulation data and 50M vision-language samples to train vision-language-action policies. We evaluate 89 policies over 58,000 simulation rollouts and 2,835 real-world rollouts. Our results show that co-training with forms of vision-language and cross-embodiment robot data substantially improves generalization to distribution shifts, unseen tasks, and language following, while discrete action token variants yield no significant benefits. Combining effective modalities produces cumulative gains and enables rapid adaptation to unseen long-horizon dexterous tasks via fine-tuning. Training exclusively on robot data degrades the visiolinguistic understanding of the vision-language model backbone, while co-training with effective modalities restores these capabilities. Explicitly conditioning action generation on chain-of-thought traces learned from co-training data does not improve performance in our simulation benchmark. Together, these results provide practical guidance for building scalable generalist robot policies.

cs.RO↗

arXiv2025

SAFE: Multitask Failure Detection for Vision-Language-Action Models

While vision-language-action models (VLAs) have shown promising robotic behaviors across a diverse set of manipulation tasks, they achieve limited success rates when deployed on novel tasks out of the box. To allow these policies to safely interact with their environments, we need a failure detector that gives a timely alert such that the robot can stop, backtrack, or ask for help. However, existing failure detectors are trained and tested only on one or a few specific tasks, while generalist VLAs require the detector to generalize and detect failures also in unseen tasks and novel environments. In this paper, we introduce the multitask failure detection problem and propose SAFE, a failure detector for generalist robot policies such as VLAs. We analyze the VLA feature space and find that VLAs have sufficient high-level knowledge about task success and failure, which is generic across different tasks. Based on this insight, we design SAFE to learn from VLA internal features and predict a single scalar indicating the likelihood of task failure. SAFE is trained on both successful and failed rollouts and is evaluated on unseen tasks. SAFE is compatible with different policy architectures. We test it on OpenVLA, $π_0$, and $π_0$-FAST in both simulated and real-world environments extensively. We compare SAFE with diverse baselines and show that SAFE achieves state-of-the-art failure detection performance and the best trade-off between accuracy and detection time using conformal prediction. More qualitative results and code can be found at the project webpage: https://vla-safe.github.io/

cs.RO↗

arXiv2025

CUPID: Curating Data your Robot Loves with Influence Functions

In robot imitation learning, policy performance is tightly coupled with the quality and composition of the demonstration data. Yet, developing a precise understanding of how individual demonstrations contribute to downstream outcomes - such as closed-loop task success or failure - remains a persistent challenge. We propose CUPID, a robot data curation method based on a novel influence function-theoretic formulation for imitation learning policies. Given a set of evaluation rollouts, CUPID estimates the influence of each training demonstration on the policy's expected return. This enables ranking and selection of demonstrations according to their impact on the policy's closed-loop performance. We use CUPID to curate data by 1) filtering out training demonstrations that harm policy performance and 2) subselecting newly collected trajectories that will most improve the policy. Extensive simulated and hardware experiments show that our approach consistently identifies which data drives test-time performance. For example, training with less than 33% of curated data can yield state-of-the-art diffusion policies on the simulated RoboMimic benchmark, with similar gains observed in hardware. Furthermore, hardware experiments show that our method can identify robust strategies under distribution shift, isolate spurious correlations, and even enhance the post-training of generalist robot policies. Videos and code are made available at: https://cupid-curation.github.io.

cs.RO↗

arXiv2025

A Careful Examination of Large Behavior Models for Multitask Dexterous Manipulation

Robot manipulation has seen tremendous progress in recent years, with imitation learning policies enabling successful performance of dexterous and hard-to-model tasks. Concurrently, scaling data and model size has led to the development of capable language and vision foundation models, motivating large-scale efforts to create general-purpose robot foundation models. While these models have garnered significant enthusiasm and investment, meaningful evaluation of real-world performance remains a challenge, limiting both the pace of development and inhibiting a nuanced understanding of current capabilities. In this paper, we rigorously evaluate multitask robot manipulation policies, referred to as Large Behavior Models (LBMs), by extending the Diffusion Policy paradigm across a corpus of simulated and real-world robot data. We propose and validate an evaluation pipeline to rigorously analyze the capabilities of these models with statistical confidence. We compare against single-task baselines through blind, randomized trials in a controlled setting, using both simulation and real-world experiments. We find that multi-task pretraining makes the policies more successful and robust, and enables teaching complex new tasks more quickly, using a fraction of the data when compared to single-task baselines. Moreover, performance predictably increases as pretraining scale and diversity grows. Project page: https://toyotaresearchinstitute.github.io/lbm1/

cs.RO↗

arXiv2025

Can We Detect Failures Without Failure Data? Uncertainty-Aware Runtime Failure Detection for Imitation Learning Policies

Recent years have witnessed impressive robotic manipulation systems driven by advances in imitation learning and generative modeling, such as diffusion- and flow-based approaches. As robot policy performance increases, so does the complexity and time horizon of achievable tasks, inducing unexpected and diverse failure modes that are difficult to predict a priori. To enable trustworthy policy deployment in safety-critical human environments, reliable runtime failure detection becomes important during policy inference. However, most existing failure detection approaches rely on prior knowledge of failure modes and require failure data during training, which imposes a significant challenge in practicality and scalability. In response to these limitations, we present FAIL-Detect, a modular two-stage approach for failure detection in imitation learning-based robotic manipulation. To accurately identify failures from successful training data alone, we frame the problem as sequential out-of-distribution (OOD) detection. We first distill policy inputs and outputs into scalar signals that correlate with policy failures and capture epistemic uncertainty. FAIL-Detect then employs conformal prediction (CP) as a versatile framework for uncertainty quantification with statistical guarantees. Empirically, we thoroughly investigate both learned and post-hoc scalar signal candidates on diverse robotic manipulation tasks. Our experiments show learned signals to be mostly consistently effective, particularly when using our novel flow-based density estimator. Furthermore, our method detects failures more accurately and faster than state-of-the-art (SOTA) failure detection baselines. These results highlight the potential of FAIL-Detect to enhance the safety and reliability of imitation learning-based robotic systems as they progress toward real-world deployment.

cs.RO↗

arXiv2025

Is Your Imitation Learning Policy Better than Mine? Policy Comparison with Near-Optimal Stopping

Imitation learning has enabled robots to perform complex, long-horizon tasks in challenging dexterous manipulation settings. As new methods are developed, they must be rigorously evaluated and compared against corresponding baselines through repeated evaluation trials. However, policy comparison is fundamentally constrained by a small feasible sample size (e.g., 10 or 50) due to significant human effort and limited inference throughput of policies. This paper proposes a novel statistical framework for rigorously comparing two policies in the small sample size regime. Prior work in statistical policy comparison relies on batch testing, which requires a fixed, pre-determined number of trials and lacks flexibility in adapting the sample size to the observed evaluation data. Furthermore, extending the test with additional trials risks inducing inadvertent p-hacking, undermining statistical assurances. In contrast, our proposed statistical test is sequential, allowing researchers to decide whether or not to run more trials based on intermediate results. This adaptively tailors the number of trials to the difficulty of the underlying comparison, saving significant time and effort without sacrificing probabilistic correctness. Extensive numerical simulation and real-world robot manipulation experiments show that our test achieves near-optimal stopping, letting researchers stop evaluation and make a decision in a near-minimal number of trials. Specifically, it reduces the number of evaluation trials by up to 32% as compared to state-of-the-art baselines, while preserving the probabilistic correctness and statistical power of the comparison. Moreover, our method is strongest in the most challenging comparison instances (requiring the most evaluation trials); in a multi-task comparison scenario, we save the evaluator more than 160 simulation rollouts.

cs.RO↗

arXiv2024

How Generalizable Is My Behavior Cloning Policy? A Statistical Approach to Trustworthy Performance Evaluation

With the rise of stochastic generative models in robot policy learning, end-to-end visuomotor policies are increasingly successful at solving complex tasks by learning from human demonstrations. Nevertheless, since real-world evaluation costs afford users only a small number of policy rollouts, it remains a challenge to accurately gauge the performance of such policies. This is exacerbated by distribution shifts causing unpredictable changes in performance during deployment. To rigorously evaluate behavior cloning policies, we present a framework that provides a tight lower-bound on robot performance in an arbitrary environment, using a minimal number of experimental policy rollouts. Notably, by applying the standard stochastic ordering to robot performance distributions, we provide a worst-case bound on the entire distribution of performance (via bounds on the cumulative distribution function) for a given task. We build upon established statistical results to ensure that the bounds hold with a user-specified confidence level and tightness, and are constructed from as few policy rollouts as possible. In experiments we evaluate policies for visuomotor manipulation in both simulation and hardware. Specifically, we (i) empirically validate the guarantees of the bounds in simulated manipulation settings, (ii) find the degree to which a learned policy deployed on hardware generalizes to new real-world environments, and (iii) rigorously compare two policies tested in out-of-distribution settings. Our experimental data, code, and implementation of confidence bounds are open-source.

cs.RO↗

arXiv2024

Residual Q-Learning: Offline and Online Policy Customization without Value

Imitation Learning (IL) is a widely used framework for learning imitative behavior from demonstrations. It is especially appealing for solving complex real-world tasks where handcrafting reward function is difficult, or when the goal is to mimic human expert behavior. However, the learned imitative policy can only follow the behavior in the demonstration. When applying the imitative policy, we may need to customize the policy behavior to meet different requirements coming from diverse downstream tasks. Meanwhile, we still want the customized policy to maintain its imitative nature. To this end, we formulate a new problem setting called policy customization. It defines the learning task as training a policy that inherits the characteristics of the prior policy while satisfying some additional requirements imposed by a target downstream task. We propose a novel and principled approach to interpret and determine the trade-off between the two task objectives. Specifically, we formulate the customization problem as a Markov Decision Process (MDP) with a reward function that combines 1) the inherent reward of the demonstration; and 2) the add-on reward specified by the downstream task. We propose a novel framework, Residual Q-learning, which can solve the formulated MDP by leveraging the prior policy without knowing the inherent reward or value function of the prior policy. We derive a family of residual Q-learning algorithms that can realize offline and online policy customization, and show that the proposed algorithms can effectively accomplish policy customization tasks in various environments. Demo videos and code are available on our website: https://sites.google.com/view/residualq-learning.

cs.LG↗

arXiv2023

In-Distribution Barrier Functions: Self-Supervised Policy Filters that Avoid Out-of-Distribution States

Learning-based control approaches have shown great promise in performing complex tasks directly from high-dimensional perception data for real robotic systems. Nonetheless, the learned controllers can behave unexpectedly if the trajectories of the system divert from the training data distribution, which can compromise safety. In this work, we propose a control filter that wraps any reference policy and effectively encourages the system to stay in-distribution with respect to offline-collected safe demonstrations. Our methodology is inspired by Control Barrier Functions (CBFs), which are model-based tools from the nonlinear control literature that can be used to construct minimally invasive safe policy filters. While existing methods based on CBFs require a known low-dimensional state representation, our proposed approach is directly applicable to systems that rely solely on high-dimensional visual observations by learning in a latent state-space. We demonstrate that our method is effective for two different visuomotor control tasks in simulation environments, including both top-down and egocentric view settings.

cs.RO↗

arXiv2023

RAP: Risk-Aware Prediction for Robust Planning

Robust planning in interactive scenarios requires predicting the uncertain future to make risk-aware decisions. Unfortunately, due to long-tail safety-critical events, the risk is often under-estimated by finite-sampling approximations of probabilistic motion forecasts. This can lead to overconfident and unsafe robot behavior, even with robust planners. Instead of assuming full prediction coverage that robust planners require, we propose to make prediction itself risk-aware. We introduce a new prediction objective to learn a risk-biased distribution over trajectories, so that risk evaluation simplifies to an expected cost estimation under this biased distribution. This reduces the sample complexity of the risk estimation during online planning, which is needed for safe real-time performance. Evaluation results in a didactic simulation environment and on a real-world dataset demonstrate the effectiveness of our approach. The code and a demo are available.

cs.LG↗

arXiv2021

SACBP: Belief Space Planning for Continuous-Time Dynamical Systems via Stochastic Sequential Action Control

We propose a novel belief space planning technique for continuous dynamics by viewing the belief system as a hybrid dynamical system with time-driven switching. Our approach is based on the perturbation theory of differential equations and extends Sequential Action Control to stochastic dynamics. The resulting algorithm, which we name SACBP, does not require discretization of spaces or time and synthesizes control signals in near real-time. SACBP is an anytime algorithm that can handle general parametric Bayesian filters under certain assumptions. We demonstrate the effectiveness of our approach in an active sensing scenario and a model-based Bayesian reinforcement learning problem. In these challenging problems, we show that the algorithm significantly outperforms other existing solution techniques including approximate dynamic programming and local trajectory optimization.

math.OC↗

arXiv2021

RAT iLQR: A Risk Auto-Tuning Controller to Optimally Account for Stochastic Model Mismatch

Successful robotic operation in stochastic environments relies on accurate characterization of the underlying probability distributions, yet this is often imperfect due to limited knowledge. This work presents a control algorithm that is capable of handling such distributional mismatches. Specifically, we propose a novel nonlinear MPC for distributionally robust control, which plans locally optimal feedback policies against a worst-case distribution within a given KL divergence bound from a Gaussian distribution. Leveraging mathematical equivalence between distributionally robust control and risk-sensitive optimal control, our framework also provides an algorithm to dynamically adjust the risk-sensitivity level online for risk-sensitive control. The benefits of the distributional robustness as well as the automatic risk-sensitivity adjustment are demonstrated in a dynamic collision avoidance scenario where the predictive distribution of human motion is erroneous.

cs.RO↗

arXiv2020

Risk-Sensitive Sequential Action Control with Multi-Modal Human Trajectory Forecasting for Safe Crowd-Robot Interaction

This paper presents a novel online framework for safe crowd-robot interaction based on risk-sensitive stochastic optimal control, wherein the risk is modeled by the entropic risk measure. The sampling-based model predictive control relies on mode insertion gradient optimization for this risk measure as well as Trajectron++, a state-of-the-art generative model that produces multimodal probabilistic trajectory forecasts for multiple interacting agents. Our modular approach decouples the crowd-robot interaction into learning-based prediction and model-based control, which is advantageous compared to end-to-end policy learning methods in that it allows the robot's desired behavior to be specified at run time. In particular, we show that the robot exhibits diverse interaction behavior by varying the risk sensitivity parameter. A simulation study and a real-world experiment show that the proposed online framework can accomplish safe and efficient navigation while avoiding collisions with more than 50 humans in the scene.

cs.RO↗