arXiv subjects

Houman Owhadi

Publications and source records attributed to Houman Owhadi.

At least 109 records · Page 6Linked to original sources

arXiv2011

Space-time FLAVORS: finite difference, multisymlectic, and pseudospectral integrators for multiscale PDEs

We present a new class of integrators for stiff PDEs. These integrators are generalizations of FLow AVeraging integratORS (FLAVORS) for stiff ODEs and SDEs introduced in [Tao, Owhadi and Marsden 2010] with the following properties: (i) Multiscale: they are based on flow averaging and have a computational cost determined by mesoscopic steps in space and time instead of microscopic steps in space and time; (ii) Versatile: the method is based on averaging the flows of the given PDEs (which may have hidden slow and fast processes). This bypasses the need for identifying explicitly (or numerically) the slow variables or reduced effective PDEs; (iii) Nonintrusive: A pre-existing numerical scheme resolving the microscopic time scale can be used as a black box and easily turned into one of the integrators in this paper by turning the large coefficients on over a microscopic timescale and off during a mesoscopic timescale; (iv) Convergent over two scales: strongly over slow processes and in the sense of measures over fast ones; (v) Structure-preserving: for stiff Hamiltonian PDEs (possibly on manifolds), they can be made to be multi-symplectic, symmetry-preserving (symmetries are group actions that leave the system invariant) in all variables and variational.

math.NA↗

arXiv2011

Variational integrators for electric circuits

In this contribution, we develop a variational integrator for the simulation of (stochastic and multiscale) electric circuits. When considering the dynamics of an electrical circuit, one is faced with three special situations: 1. The system involves external (control) forcing through external (controlled) voltage sources and resistors. 2. The system is constrained via the Kirchhoff current (KCL) and voltage laws (KVL). 3. The Lagrangian is degenerate. Based on a geometric setting, an appropriate variational formulation is presented to model the circuit from which the equations of motion are derived. A time-discrete variational formulation provides an iteration scheme for the simulation of the electric circuit. Dependent on the discretization, the intrinsic degeneracy of the system can be canceled for the discrete variational scheme. In this way, a variational integrator is constructed that gains several advantages compared to standard integration tools for circuits; in particular, a comparison to BDF methods (which are usually the method of choice for the simulation of electric circuits) shows that even for simple LCR circuits, a better energy behavior and frequency spectrum preservation can be observed using the developed variational integrator.

math.NA↗

arXiv2010

Equivalence of concentration inequalities for linear and non-linear functions

We consider a random variable $X$ that takes values in a (possibly infinite-dimensional) topological vector space $\mathcal{X}$. We show that, with respect to an appropriate "normal distance" on $\mathcal{X}$, concentration inequalities for linear and non-linear functions of $X$ are equivalent. This normal distance corresponds naturally to the concentration rate in classical concentration results such as Gaussian concentration and concentration on the Euclidean and Hamming cubes. Under suitable assumptions on the roundness of the sets of interest, the concentration inequalities so obtained are asymptotically optimal in the high-dimensional limit.

math.PR↗

arXiv2010

Temperature and Friction Accelerated Sampling of Boltzmann-Gibbs Distribution

This paper is concerned with tuning friction and temperature in Langevin dynamics for fast sampling from the canonical ensemble. We show that near-optimal acceleration is achieved by choosing friction so that the local quadratic approximation of the Hamiltonian is a critical damped oscillator. The system is also over-heated and cooled down to its final temperature. The performances of different cooling schedules are analyzed as functions of total simulation time.

physics.comp-ph↗

arXiv2010

Structure preserving Stochastic Impulse Methods for stiff Langevin systems with a uniform global error of order 1 or 1/2 on position

Impulse methods are generalized to a family of integrators for Langevin systems with quadratic stiff potentials and arbitrary soft potentials. Uniform error bounds (independent from stiff parameters) are obtained on integrated positions allowing for coarse integration steps. The resulting integrators are explicit and structure preserving (quasi-symplectic for Langevin systems).

math.NA↗

arXiv2010

A non-adapted sparse approximation of PDEs with stochastic inputs

We propose a method for the approximation of solutions of PDEs with stochastic coefficients based on the direct, i.e., non-adapted, sampling of solutions. This sampling can be done by using any legacy code for the deterministic problem as a black box. The method converges in probability (with probabilistic error bounds) as a consequence of sparsity and a concentration of measure phenomenon on the empirical correlation between samples. We show that the method is well suited for truly high-dimensional problems (with slow decay in the spectrum).

math.NA↗

arXiv2010

Non-intrusive and structure preserving multiscale integration of stiff ODEs, SDEs and Hamiltonian systems with hidden slow dynamics via flow averaging

We introduce a new class of integrators for stiff ODEs as well as SDEs. These integrators are (i) {\it Multiscale}: they are based on flow averaging and so do not fully resolve the fast variables and have a computational cost determined by slow variables (ii) {\it Versatile}: the method is based on averaging the flows of the given dynamical system (which may have hidden slow and fast processes) instead of averaging the instantaneous drift of assumed separated slow and fast processes. This bypasses the need for identifying explicitly (or numerically) the slow or fast variables (iii) {\it Nonintrusive}: A pre-existing numerical scheme resolving the microscopic time scale can be used as a black box and easily turned into one of the integrators in this paper by turning the large coefficients on over a microscopic timescale and off during a mesoscopic timescale (iv) {\it Convergent over two scales}: strongly over slow processes and in the sense of measures over fast ones. We introduce the related notion of two-scale flow convergence and analyze the convergence of these integrators under the induced topology (v) {\it Structure preserving}: for stiff Hamiltonian systems (possibly on manifolds), they can be made to be symplectic, time-reversible, and symmetry preserving (symmetries are group actions that leave the system invariant) in all variables. They are explicit and applicable to arbitrary stiff potentials (that need not be quadratic). Their application to the Fermi-Pasta-Ulam problems shows accuracy and stability over four orders of magnitude of time scales. For stiff Langevin equations, they are symmetry preserving, time-reversible and Boltzmann-Gibbs reversible, quasi-symplectic on all variables and conformally symplectic with isotropic friction.

math.NA↗

arXiv2010

Long-Run Accuracy of Variational Integrators in the Stochastic Context

This paper presents a Lie-Trotter splitting for inertial Langevin equations (Geometric Langevin Algorithm) and analyzes its long-time statistical properties. The splitting is defined as a composition of a variational integrator with an Ornstein-Uhlenbeck flow. Assuming the exact solution and the splitting are geometrically ergodic, the paper proves the discrete invariant measure of the splitting approximates the invariant measure of inertial Langevin to within the accuracy of the variational integrator in representing the Hamiltonian. In particular, if the variational integrator admits no energy error, then the method samples the invariant measure of inertial Langevin without error. Numerical validation is provided using explicit variational integrators with first, second, and fourth order accuracy.

math.NA↗

arXiv2010

Flux norm approach to finite dimensional homogenization approximations with non-separated scales and high contrast

We consider divergence-form scalar elliptic equations and vectorial equations for elasticity with rough ($L^\infty(Ω)$, $Ω\subset \R^d$) coefficients $a(x)$ that, in particular, model media with non-separated scales and high contrast in material properties. We define the flux norm as the $L^2$ norm of the potential part of the fluxes of solutions, which is equivalent to the usual $H^1$-norm. We show that in the flux norm, the error associated with approximating, in a properly defined finite-dimensional space, the set of solutions of the aforementioned PDEs with rough coefficients is equal to the error associated with approximating the set of solutions of the same type of PDEs with smooth coefficients in a standard space (e.g., piecewise polynomial). We refer to this property as the {\it transfer property}. A simple application of this property is the construction of finite dimensional approximation spaces with errors independent of the regularity and contrast of the coefficients and with optimal and explicit convergence rates. This transfer property also provides an alternative to the global harmonic change of coordinates for the homogenization of elliptic operators that can be extended to elasticity equations. The proofs of these homogenization results are based on a new class of elliptic inequalities which play the same role in our approach as the div-curl lemma in classical homogenization.

math.AP↗

arXiv2009

Discrete Geometric Structures in Homogenization and Inverse Homogenization with application to EIT

We introduce a new geometric approach for the homogenization and inverse homogenization of the divergence form elliptic operator with rough conductivity coefficients $σ(x)$ in dimension two. We show that conductivity coefficients are in one-to-one correspondence with divergence-free matrices and convex functions $s(x)$ over the domain $Ω$. Although homogenization is a non-linear and non-injective operator when applied directly to conductivity coefficients, homogenization becomes a linear interpolation operator over triangulations of $Ω$ when re-expressed using convex functions, and is a volume averaging operator when re-expressed with divergence-free matrices. Using optimal weighted Delaunay triangulations for linearly interpolating convex functions, we obtain an optimally robust homogenization algorithm for arbitrary rough coefficients. Next, we consider inverse homogenization and show how to decompose it into a linear ill-posed problem and a well-posed non-linear problem. We apply this new geometric approach to Electrical Impedance Tomography (EIT). It is known that the EIT problem admits at most one isotropic solution. If an isotropic solution exists, we show how to compute it from any conductivity having the same boundary Dirichlet-to-Neumann map. It is known that the EIT problem admits a unique (stable with respect to $G$-convergence) solution in the space of divergence-free matrices. As such we suggest that the space of convex functions is the natural space in which to parameterize solutions of the EIT problem.

math.AP↗

arXiv2008

Numerical Homogenization of the Acoustic Wave Equations with a Continuum of Scales

In this paper, we consider numerical homogenization of acoustic wave equations with heterogeneous coefficients, namely, when the bulk modulus and the density of the medium are only bounded. We show that under a Cordes type condition the second order derivatives of the solution with respect to harmonic coordinates are $L^2$ (instead $H^{-1}$ with respect to Euclidean coordinates) and the solution itself is in $L^{\infty}(0,T,H^2(Ω))$ (instead of $L^{\infty}(0,T,H^1(Ω))$ with respect to Euclidean coordinates). Then, we propose an implicit time stepping method to solve the resulted linear system on coarse spatial scales, and present error estimates of the method. It follows that by pre-computing the associated harmonic coordinates, it is possible to numerically homogenize the wave equation without assumptions of scale separation or ergodicity.

math.NA↗

arXiv2008

Ergodicity of Langevin Processes with Degenerate Diffusion in Momentums

This paper introduces a geometric method for proving ergodicity of degenerate noise driven stochastic processes. The driving noise is assumed to be an arbitrary Levy process with non-degenerate diffusion component (but that may be applied to a single degree of freedom of the system). The geometric conditions are the approximate controllability of the process the fact that there exists a point in the phase space where the interior of the image of a point via a secondarily randomized version of the driving noise is non void. The paper applies the method to prove ergodicity of a sliding disk governed by Langevin-type equations (a simple stochastic rigid body system). The paper shows that a key feature of this Langevin process is that even though the diffusion and drift matrices associated to the momentums are degenerate, the system is still at uniform temperature.

math.PR↗

arXiv2007

Stochastic Variational Integrators

This paper presents a continuous and discrete Lagrangian theory for stochastic Hamiltonian systems on manifolds. The main result is to derive stochastic governing equations for such systems from a critical point of a stochastic action. Using this result the paper derives Langevin-type equations for constrained mechanical systems and implements a stochastic analog of Lagrangian reduction. These are easy consequences of the fact that the stochastic action is intrinsically defined. Stochastic variational integrators (SVIs) are developed using a discretized stochastic variational principle. The paper shows that the discrete flow of an SVI is a.s. symplectic and in the presence of symmetry a.s. momentum-map preserving. A first-order mean-square convergent SVI for mechanical systems on Lie groups is introduced. As an application of the theory, SVIs are exhibited for multiple, randomly forced and torqued rigid-bodies interacting via a potential.

math.PR↗

arXiv2007

Bistable equilibrium points of mercury body burden

In the last century mercury levels in the global environment have tripled as a result of increased pollution from industrial, occupational, medicinal and domestic uses \cite{BaMe03}. Glutathione is known to be the main agent responsible for the excretion of mercury (we refer to \cite{Thim05}, \cite{ZalBar99} and \cite{Lyn02}). It has also been shown that mercury inhibits glutathione synthetase (an enzyme acting in the synthesization of Glutathione), therefore leading to decreased glutathione levels (we refer to \cite{Thim05}, \cite{GeGe05}, \cite{GeGe06} and \cite{RDeth04}). Mercury also interferes with the production of heme in the porphyrin pathway \cite{WoMaEc93}. Heme is needed for biological energy production and ability to detox organic toxins via the P450 enzymes \cite{Boy06}. The purpose of this paper is to show that body's response to mercury exposure is hysteretic, i.e. when this feedback of mercury on its main detoxifying agents is strong enough then mercury body burden has two points of equilibrium: one with normal abilities to detoxify and low levels of mercury and one with inhibited abilities to detoxify and high levels of mercury. Furthermore, a small increase of body's mercury burden may not be sufficient to trigger observable neurotoxic effects but it may be sufficient to act as a switch leading to an accumulation of mercury in the body through environmental exposure until its toxicity becomes manifest.

q-bio.OT↗

arXiv2007

Ballistic Transport at Uniform Temperature

A paradigm for isothermal, mechanical rectification of stochastic fluctuations is introduced in this paper. The central idea is to transform energy injected by random perturbations into rigid-body rotational kinetic energy. The prototype considered in this paper is a mechanical system consisting of a set of rigid bodies in interaction through magnetic fields. The system is stochastically forced by white noise and dissipative through mechanical friction. The Gibbs-Boltzmann distribution at a specific temperature defines the unique invariant measure under the flow of this stochastic process and allows us to define ``the temperature'' of the system. This measure is also ergodic and weakly mixing. Although the system does not exhibit global directed motion, it is shown that global ballistic motion is possible (the mean-squared displacement grows like t squared). More precisely, although work cannot be extracted from thermal energy by the second law of thermodynamics, it is shown that ballistic transport from thermal energy is possible. In particular, the dynamics is characterized by a meta-stable state in which the system exhibits directed motion over random time scales. This phenomenon is caused by interaction of three attributes of the system: a non flat (yet bounded) potential energy landscape, a rigid body effect (coupling translational momentum and angular momentum through friction) and the degeneracy of the noise/friction tensor on the momentums (the fact that noise is not applied to all degrees of freedom).

math.PR↗

arXiv2007

Stochastic Variational Partitioned Runge-Kutta Integrators for Constrained Systems

Stochastic variational integrators for constrained, stochastic mechanical systems are developed in this paper. The main results of the paper are twofold: an equivalence is established between a stochastic Hamilton-Pontryagin (HP) principle in generalized coordinates and constrained coordinates via Lagrange multipliers, and variational partitioned Runge-Kutta (VPRK) integrators are extended to this class of systems. Among these integrators are first and second-order strongly convergent RATTLE-type integrators. We prove order of accuracy of the methods provided. The paper also reviews the deterministic treatment of VPRK integrators from the HP viewpoint.

math.NA↗

arXiv2005

Homogenization of parabolic equations with a continuum of space and time scales

This paper addresses the issue of homogenization of linear divergence form parabolic operators in situations where no ergodicity and no scale separation in time or space are available. Namely, we consider divergence form linear parabolic operators in $Ω\subset \R^n$ with $L^\infty(Ω\times (0,T))$-coefficients. It appears that the inverse operator maps the unit ball of $L^2(Ω\times (0,T))$ into a space of functions which at small (time and space) scales are close in $H^1$-norm to a functional space of dimension $n$. It follows that once one has solved these equations at least $n$-times it is possible to homogenize them both in space and in time, reducing the number of operations counts necessary to obtain further solutions. In practice we show that under a Cordes type condition that the first order time derivatives and second order space derivatives of the solution of these operators with respect to harmonic coordinates are in $L^2$ (instead of $H^{-1}$ with Euclidean coordinates). If the medium is time independent then it is sufficient to solve $n$ times the associated elliptic equation in order to homogenize the parabolic equation.

math.AP↗

arXiv2005

Metric based up-scaling

We consider divergence form elliptic operators in dimension $n\geq 2$ with $L^\infty$ coefficients. Although solutions of these operators are only Hölder continuous, we show that they are differentiable ($C^{1,α}$) with respect to harmonic coordinates. It follows that numerical homogenization can be extended to situations where the medium has no ergodicity at small scales and is characterized by a continuum of scales by transferring a new metric in addition to traditional averaged (homogenized) quantities from subgrid scales into computational scales and error bounds can be given. This numerical homogenization method can also be used as a compression tool for differential operators.

math.NA↗