arXiv subjects

Jianping Yu

Publications and source records attributed to Jianping Yu.

14 recordsLinked to original sources

arXiv2025

Monolithic low-noise erbium-doped thin-film lithium niobate waveguide amplifier with 18 dB fiber to fiber net gain

Erbium-doped waveguide amplifiers have captured great attentions in recent years due to the rapid advance of photonic integration materials and fabrication techniques. In this work, a compact erbium-doped thin-film lithium niobate waveguide amplifier integrated with high-efficiency edge-couplers on the small footprint of 2 mm{\cross}25 mm, achieving >18 dB fiber-to-fiber (off-chip) net gain with bidirectional pumping by ~1480 nm laser diodes, is fabricated by the photolithography assisted chemo-mechanical etching technique. The fiber-to-fiber noise figures of the amplifier are also characterized to be around 5 dB, and the maximum amplified signal powers at the output fiber are above 13 dBm. Theoretical amplifier modeling resolving the erbium absorption and emission spectra predicts the efficient gain scaling with waveguide length for most of the telecom C-band wavelengths. The demonstrated high-external-gain erbium-doped waveguide amplifier will benefit various applications from optical communication and metrology to integrated photonic computing and artificial intelligence

physics.optics↗

arXiv2024

An electro-optically tunable arrayed waveguide grating fabricated on thin film lithium niobate

We design and fabricate an 8-channel thin film lithium niobate (TFLN) arrayed-waveguide grating (AWG) and demonstrate the electro-optical tunability of the device. The monolithically integrated microelectrodes are designed for waveguides phase modulation and wavelength tunning. Experiments show that the fabricated electro-optically controlled TFLN AWG has a channel spacing of 200 GHz and a wavelength tuning efficiency of 10 pm/V.

physics.optics↗

arXiv2024

An integrated electro-optically tunable multi-channel interference cavity laser

We demonstrated a continuously tunable laser system by butt coupling a reflective semiconductor optical amplifier (RSOA) chip with a thin-film lithium niobate (TFLN) based multi-channel interference (MCI) cavity chip. This hybrid integrated lasers allows for fine-tuning of the laser wavelength from 1538 nm to 1560 nm with a resolution of 0.014 nm and a side-mode suppression ratio (SMSR) exceeding 30 dB. The MCI cavity chip is fabricated using the photolithography assisted chemo-mechanical etching (PLACE) technique. The developed laser has an output power of approximately 10 {\mu}W, which can be further amplified to 70 mW using a commercial erbium-doped fiber amplifier (EDFA) without significant broadening of the laser linewidth.

physics.optics↗

arXiv2024

Compact low-half-wave-voltage thin film lithium niobate electro-optic phase modulator fabricated by photolithography assisted chemo-mechanical etching

This paper presents a compact dual-arm thin film lithium niobate (TFLN) electro-optic phase modulator fabricated using the photolithography-assisted chemo-mechanical etching (PLACE) technique. The design of the device allows for complete utilization of the microwave electric field, doubling the modulation efficiency compared to single-arm modulators in theory. With a half-wave voltage of approximately 3 V and a modulation length of 1 cm, the device outperforms conventional phase modulators. Furthermore, the phase modulator exhibits low sensitivity to optical wavelengths in the range of 1510-1600 nm and offers a low insertion loss of 2.8 dB. The capability to generate multiple sideband signals for optical frequency comb applications is also demonstrated, producing 29 sideband signals at an input microwave power of 2 W.

physics.optics↗

arXiv2023

Thin Film Lithium Niobate Electro-optic Isolator Fabricated by photolithography assisted chemo-mechanical etching (PLACE)

We report a thin-film lithium niobate electro-optic isolator fabricated by photolithography-assisted chemo-mechanical etching in this work. The device demonstrates 39.50 dB isolation when subjected to a 24 GHz microwave of 25.5 dBm on its electrodes. The measured isolation remains consistently above 30 dB within the 1510 nm to 1600 nm wavelength range. The overall device insertion loss, specifically the fiber-to-fiber insert loss, has been measured to be 2.6 dB, which is attributed to our highly efficient spot size converter and the low propagation loss observed in the fabricated waveguides.

physics.optics↗

arXiv2023

On-chip arrayed waveguide grating fabricated on thin film lithium niobate

We design an on-chip 8-channel TFLN AWG and fabricate the device using photolithography assisted chemo-mechanical etching (PLACE) technique. We experimentally measure the transmission of the fabricated TFLN AWG near the central wavelength of 1550 nm. We obtain an on-chip loss as low as 3.32 dB, a single-channel bandwidth of 1.6 nm and a total-channel bandwidth of 12.8 nm. The crosstalk between adjacent channels was measured to be below -7.01 dB within the wavelength range from 1543 nm to 1558 nm, and the crosstalk between non-adjacent channels was below -15 dB.

physics.optics↗

arXiv2022

Monolithically integrated active passive waveguide array fabricated on thin film lithium niobate using a single continuous photolithography process

We demonstrate a robust low-loss optical interface by tiling passive (i.e., without doping of active ions) thin film lithium niobate (TFLN) and active (i.e., doped with rare earth ions) TFLN substrates for monolithic integration of passive/active lithium niobate photonics. The tiled substrates composed of both active and passive areas allow to pattern the mask of the integrated active passive photonic device at once using a single continuous photolithography process. The interface loss of tiled substrate is measured as low as 0.26 dB. Thanks to the stability provided by this approach, a four-channel waveguide amplifier is realized in a straightforward manner, which shows a net gain of ~5 dB at 1550-nm wavelength and that of ~8 dB at 1530-nm wavelength for each channel. The robust low-loss optical interface for passive/active photonic integration will facilitate large-scale high performance photonic devices which require on-chip light sources and amplifiers.

physics.optics↗

arXiv2022

Learning Self-Modulating Attention in Continuous Time Space with Applications to Sequential Recommendation

User interests are usually dynamic in the real world, which poses both theoretical and practical challenges for learning accurate preferences from rich behavior data. Among existing user behavior modeling solutions, attention networks are widely adopted for its effectiveness and relative simplicity. Despite being extensively studied, existing attentions still suffer from two limitations: i) conventional attentions mainly take into account the spatial correlation between user behaviors, regardless the distance between those behaviors in the continuous time space; and ii) these attentions mostly provide a dense and undistinguished distribution over all past behaviors then attentively encode them into the output latent representations. This is however not suitable in practical scenarios where a user's future actions are relevant to a small subset of her/his historical behaviors. In this paper, we propose a novel attention network, named self-modulating attention, that models the complex and non-linearly evolving dynamic user preferences. We empirically demonstrate the effectiveness of our method on top-N sequential recommendation tasks, and the results on three large-scale real-world datasets show that our model can achieve state-of-the-art performance.

cs.IR↗

arXiv2022

On-chip integrated Yb3+-doped waveguide amplifiers on thin film lithium niobate

We report the fabrication and optical characterization of Yb3+-doped waveguide amplifiers (YDWA) on the thin film lithium niobate fabricated by photolithography assisted chemo-mechanical etching. The fabricated Yb3+-doped lithium niobate waveguides demonstrates low propagation loss of 0.13 dB/cm at 1030 nm and 0.1 dB/cm at 1060 nm. The internal net gain of 5 dB at 1030 nm and 8 dB at 1060 nm are measured on a 4.0 cm long waveguide pumped by 976nm laser diodes, indicating the gain per unit length of 1.25 dB/cm at 1030 nm and 2 dB/cm at 1060 nm, respectively. The integrated Yb3+-doped lithium niobate waveguide amplifiers will benefit the development of a powerful gain platform and are expected to contribute to the high-density integration of thin film lithium niobate based photonic chip.

physics.optics↗

arXiv2021

A high-gain cladded waveguide amplifier on erbium doped thin-film lithium niobate fabricated using photolithography assisted chemo-mechanical etching

Erbium doped integrated waveguide amplifier and laser prevail in power consumption, footprint, stability and scalability over the counterparts in bulk materials, underpinning the lightwave communication and large-scale sensing. Subject to the highly confined mode and moderate propagation loss, gain and power scaling in such integrated micro-to-nanoscale devices prove to be more challenging compared to their bulk counterparts. In this work, stimulated by the prevalent success of double-cladding optical fiber in high-gain/power operation, a Ta2O5 cladding is employed in the erbium doped lithium niobate (LN) waveguide amplifier fabricated on the thin film lithium niobate on insulator (LNOI) wafer by the photolithography assisted chemomechanical etching (PLACE) technique. Above 20 dB small signal internal net gain is achieved at the signal wavelength around 1532 nm in the 10 cm long LNOI amplifier pumped by the diode laser at ~980 nm. Experimental characterizations reveal the advantage of Ta2O5 cladding in higher optical gain compared with the air-clad amplifier, which is further explained by the theoretical modeling of the LNOI amplifier including the guided mode structures and the steady-state response of erbium ions.

physics.optics↗

arXiv2020

Incubation Induced Light Concentration Beyond the Diffraction Limit for High-Resolution Glass Printing

In the past two decades, tremendous efforts have been exerted to understand and control the delivery of ultrashort laser pulses into various types of transparent materials ranging from glass and crystal to polymer and even bio-materials. This approach opens up the route toward determinative and highly localized modification within the transparent materials, enabling three-dimensional (3D) micromachining of the materials into sophisticated structures and devices with the extreme geometrical flexibility. Owing to the linear diffraction and nonlinear self-focusing effects, the focal volume typically exhibits an asymmetric profile stretching along the longitudinal direction. This effect becomes more severe when focusing deeply into the transparent substrates for printing objects of large heights. In this work a new laser-material interaction regime is identified with the exceptional incubation effect originating from self-regulated multiple-pulse interactions with accumulated material changes. Our finding reveals a focal-volume-invariant modification deeply inside the fused silica glass, in striking contrary to the traditional believes that the geometrical shape of the laser induced modification follows the intensity distribution of the inscription laser. A macro-scale geometrically complex glass sculpture is successfully manufactured with the incubation assisted ultrashort laser inscription at uniform micrometer resolutions in all three dimensions.

physics.optics↗

arXiv2011

Modelling on the Guaranteed QoS for Wireless Sensor Networks: A Network Calculus Approach

Wireless sensor networks (WSNs) became one of the high technology domains during the last ten years. Real-time applications for them make it necessary to provide the guaranteed Quality of Service (QoS). The main contributions of this paper are a system skeleton and a guaranteed QoS model that are suitable for the WSNs. To do it, we develop a sensor node model based on virtual buffer sharing and present a two-layer scheduling model using the network calculus. With the system skeleton, we develop a guaranteed QoS model, such as the upper bounds on buffer queue length/delay/effective bandwidth, and single-hop/ multi-hops delay/jitter/effective bandwidth. Numerical results show the system skeleton and the guaranteed QoS model are scalable for different types of flows, including the self-similar traffic flows, and the parameters of flow regulators and service curves of sensor nodes affect them. Our proposal leads to buffer dimensioning, guaranteed QoS support and control in the WSNs.

cs.NI↗

arXiv2011

Degree and connectivity of the Internet's scale-free topology

In this paper we theoretically and empirically study the degree and connectivity of the Internet's scale-free topology at the autonomous system (AS) level. The basic features of the scale-free network have influence on the normalization constant of the degree distribution p(k). We develop a mathematics model of the Internet's scale-free topology. On this model we theoretically get the formulas of the average degree, the ratios of the kmin-degree (minimum degree) nodes and the kmax-degree (maximum degree) nodes, the fraction of the degrees (or links) in the hands of the richer (top best-connected) nodes. We find the average degree is larger for smaller power-law exponent {\lambda} and larger minimum or maximum degree. The ratio of the kmin-degree nodes is larger for larger {\lambda} and smaller kmin or kmax. The ratio of the kmax-degree ones is larger for smaller {\lambda} and kmax or larger kmin. The richer nodes hold most of the total degrees of the AS-level Internet topology. In addition, we reveal the ratio of the kmin-degree nodes or the rate of the increase of the average degree has power-law decay with the increase of the kmin. The ratio of the kmax-degree nodes has power-law decay with the increase of the kmax, and the fraction of the degrees in the hands of the richer 27% nodes is about 73% (the '73/27 rule'). At last, we empirically calculate, based on empirical data extracted from BGP, the average degree and the ratio and fraction using our method and other methods, and find that our method is rigorous and effective for the AS-level Internet topology.

cs.NI↗

arXiv2009

Checking Behavioral Consistency Constraints for Pervasive Context in Asynchronous Environments

Context consistency checking, the checking of specified constraint on properties of contexts, is essential to context-aware applications. In order to delineate and adapt to dynamic changes in the pervasive computing environment, context-aware applications often need to specify and check behavioral consistency constraints over the contexts. This problem is challenging mainly due to the distributed and asynchronous nature of pervasive computing environments. Specifically, the critical issue in checking behavioral constraints is the temporal ordering of contextual activities. The contextual activities usually involve multiple context collecting devices, which are fully-decentralized and interact in an asynchronous manner. However, existing context consistency checking schemes do not work in asynchronous environments, since they implicitly assume the availability of a global clock or relay on synchronized interactions. To this end, we propose the Ordering Global Activity (OGA) algorithm, which detects the ordering of the global activities based on predicate detection in asynchronous environments. The essence of our approach is the message causality and its on-the-fly coding as logic vector clocks in asynchronous environments. We implement the Middleware Infrastructure for Predicate detection in Asynchronous environments (MIPA), over which the OGA algorithm is implemented and evaluated. The evaluation results show the impact of asynchrony on the checking of behavioral consistency constraints, which justifies the primary motivation of our work. They also show that OGA can achieve accurate checking of behavioral consistency constraints in dynamic pervasive computing environments.

cs.SE↗