arXiv subjects

Jie Li

Publications and source records attributed to Jie Li.

At least 775 records · Page 43Linked to original sources

arXiv2012

Transit Timing Observations from Kepler: III. Confirmation of 4 Multiple Planet Systems by a Fourier-Domain Study of Anti-correlated Transit Timing Variations

We present a method to confirm the planetary nature of objects in systems with multiple transiting exoplanet candidates. This method involves a Fourier-Domain analysis of the deviations in the transit times from a constant period that result from dynamical interactions within the system. The combination of observed anti-correlations in the transit times and mass constraints from dynamical stability allow us to claim the discovery of four planetary systems Kepler-25, Kepler-26, Kepler-27, and Kepler-28, containing eight planets and one additional planet candidate.

astro-ph.EP↗

arXiv2012

Detection of Potential Transit Signals in the First Three Quarters of Kepler Mission Data

We present the results of a search for potential transit signals in the first three quarters of photometry data acquired by the Kepler Mission. The targets of the search include 151,722 stars which were observed over the full interval and an additional 19,132 stars which were observed for only 1 or 2 quarters. From this set of targets we find a total of 5,392 detections which meet the Kepler detection criteria: those criteria are periodicity of the signal, an acceptable signal-to-noise ratio, and a composition test which rejects spurious detections which contain non-physical combinations of events. The detected signals are dominated by events with relatively low signal-to-noise ratio and by events with relatively short periods. The distribution of estimated transit depths appears to peak in the range between 40 and 100 parts per million, with a few detections down to fewer than 10 parts per million. The detected signals are compared to a set of known transit events in the Kepler field of view which were derived by a different method using a longer data interval; the comparison shows that the current search correctly identified 88.1% of the known events. A tabulation of the detected transit signals, examples which illustrate the analysis and detection process, a discussion of future plans and open, potentially fruitful, areas of further research are included.

astro-ph.EP↗

arXiv2011

Kepler-22b: A 2.4 Earth-radius Planet in the Habitable Zone of a Sun-like Star

A search of the time-series photometry from NASA's Kepler spacecraft reveals a transiting planet candidate orbiting the 11th magnitude G5 dwarf KIC 10593626 with a period of 290 days. The characteristics of the host star are well constrained by high-resolution spectroscopy combined with an asteroseismic analysis of the Kepler photometry, leading to an estimated mass and radius of 0.970 +/- 0.060 MSun and 0.979 +/- 0.020 RSun. The depth of 492 +/- 10ppm for the three observed transits yields a radius of 2.38 +/- 0.13 REarth for the planet. The system passes a battery of tests for false positives, including reconnaissance spectroscopy, high-resolution imaging, and centroid motion. A full BLENDER analysis provides further validation of the planet interpretation by showing that contamination of the target by an eclipsing system would rarely mimic the observed shape of the transits. The final validation of the planet is provided by 16 radial velocities obtained with HIRES on Keck 1 over a one year span. Although the velocities do not lead to a reliable orbit and mass determination, they are able to constrain the mass to a 3σ upper limit of 124 MEarth, safely in the regime of planetary masses, thus earning the designation Kepler-22b. The radiative equilibrium temperature is 262K for a planet in Kepler-22b's orbit. Although there is no evidence that Kepler-22b is a rocky planet, it is the first confirmed planet with a measured radius to orbit in the Habitable Zone of any star other than the Sun.

astro-ph.EP↗

arXiv2011

Magneto-optical Kerr Effect Studies of Square Artificial Spin Ice

We report a magneto-optical Kerr effect study of the collective magnetic response of artificial square spin ice, a lithographically-defined array of single-domain ferromagnetic islands. We find that the anisotropic inter-island interactions lead to a non-monotonic angular dependence of the array coercive field. Comparisons with micromagnetic simulations indicate that the two perpendicular sublattices exhibit distinct responses to island edge roughness, which clearly influence the magnetization reversal process. Furthermore, such comparisons demonstrate that disorder associated with roughness in the island edges plays a hitherto unrecognized but essential role in the collective behavior of these systems.

cond-mat.mes-hall↗

arXiv2011

The Kepler-19 System: A Transiting 2.2 R_Earth Planet and a Second Planet Detected via Transit Timing Variations

We present the discovery of the Kepler-19 planetary system, which we first identified from a 9.3-day periodic transit signal in the Kepler photometry. From high-resolution spectroscopy of the star, we find a stellar effective temperature Teff=5541 \pm 60 K, a metallicity [Fe/H]=-0.13 \pm 0.06, and a surface gravity log(g)=4.59 \pm 0.10. We combine the estimate of Teff and [Fe/H] with an estimate of the stellar density derived from the photometric light curve to deduce a stellar mass of M_star = 0.936 \pm 0.040 M_Sun and a stellar radius of R_star = 0.850 \pm 0.018 R_Sun. We rule out the possibility that the transits result from an astrophysical false positive by first identifying the subset of stellar blends that reproduce the precise shape of the light curve. We conclude that the planetary scenario is more than three orders of magnitude more likely than a blend. The blend scenario is independently disfavored by the achromaticity of the transit: we measure a transit depth with Spitzer at 4.5 μm of 547+113-110 ppm, consistent with the depth measured in the Kepler optical bandpass of 567\pm6 ppm. We determine a physical radius of the planet Kepler-19b of R_p = 2.209 \pm 0.048 R_Earth. From radial-velocity observations of the star, we find an upper limit on the planet mass of 20.3 M_Earth, corresponding to a maximum density of 10.4 g cm^-3. We report a significant sinusoidal deviation of the transit times from a predicted linear ephemeris, which we conclude is due to an additional perturbing body in the system. We cannot uniquely determine the orbital parameters of the perturber, as various dynamical mechanisms match the amplitude, period, and shape of the transit timing signal and satisfy the host star's radial velocity limits. However, the perturber in these mechanisms has period <160 days and mass <6 M_Jup, confirming its planetary nature as Kepler-19c. [Abridged]

astro-ph.EP↗

arXiv2011

Ignoring your neighbors: Moment correlations dominated by indirect or distant interactions in an ordered nanomagnet array

We have studied the moment correlations within triangular lattice arrays of single-domain co-aligned nanoscale ferromagnetic islands. Independent variation of lattice spacing along and perpendicular to the island axis tunes the magnetostatic interactions between islands through a broad range of relative strengths. For certain lattice parameters, the sign of the correlations between near-neighbor island moments is opposite to that favored by the pair-wise interaction. This finding, supported by analysis of the total correlation in terms of direct and convoluted indirect contributions across multiple pairwise interactions, indicates that indirect interactions and/or those mediated by further neighbors can be tuned to be dominant, with implications for the wide range of systems composed of interacting nanomagnets.

cond-mat.mes-hall↗

arXiv2011

Transit Timing Observations from Kepler: I. Statistical Analysis of the First Four Months

The architectures of multiple planet systems can provide valuable constraints on models of planet formation, including orbital migration, and excitation of orbital eccentricities and inclinations. NASA's Kepler mission has identified 1235 transiting planet candidates (Borcuki et al 2011). The method of transit timing variations (TTVs) has already confirmed 7 planets in two planetary systems (Holman et al. 2010; Lissauer et al. 2011a). We perform a transit timing analysis of the Kepler planet candidates. We find that at least ~12% of planet candidates currently suitable for TTV analysis show evidence suggestive of TTVs, representing at least ~65 TTV candidates. In all cases, the time span of observations must increase for TTVs to provide strong constraints on planet masses and/or orbits, as expected based on n-body integrations of multiple transiting planet candidate systems (assuming circular and coplanar orbits). We find that the fraction of planet candidates showing TTVs in this data set does not vary significantly with the number of transiting planet candidates per star, suggesting significant mutual inclinations and that many stars with a single transiting planet should host additional non-transiting planets. We anticipate that Kepler could confirm (or reject) at least ~12 systems with multiple transiting planet candidates via TTVs. Thus, TTVs will provide a powerful tool for confirming transiting planets and characterizing the orbital dynamics of low-mass planets. If Kepler observations were extended to at least six years, then TTVs would provide much more precise constraints on the dynamics of systems with multiple transiting planets and would become sensitive to planets with orbital periods extending into the habitable zone of solar-type stars.

astro-ph.EP↗

arXiv2011

SafeZone: A Hierarchical Inter-Domain Authenticated Source Address Validation Solution

Next generation Internet is highly concerned about the issue of reliability. Principally, the foundation of reliability is authentication of the source IP address. With the signature-and-verification based defense mechanisms available today, unfortunately, there is a lack of hierarchical architecture, which makes the structure of the trust alliance excessively flat and single. Moreover, with the increasing scale of the trust alliance, costs of validation grow so quickly that they do not adapt to incremental deployment. Via comparison with traditional solutions, this article proposes a hierarchical, inter-domain authenticated source address validation solution named SafeZone. SafeZone employs two intelligent designs, lightweight tag replacement and a hierarchical partitioning scheme, each of which helps to ensure that SafeZone can construct trustworthy and hierarchical trust alliances without the negative influences and complex operations on de facto networks. Extensive experiments also indicate that SafeZone can effectively obtain the design goals of a hierarchical architecture, along with lightweight, loose coupling and "multi-fence support" and as well as an incremental deployment scheme.

cs.NI↗

arXiv2011

Characteristics of planetary candidates observed by Kepler, II: Analysis of the first four months of data

On 1 February 2011 the Kepler Mission released data for 156,453 stars observed from the beginning of the science observations on 2 May through 16 September 2009. There are 1235 planetary candidates with transit like signatures detected in this period. These are associated with 997 host stars. Distributions of the characteristics of the planetary candidates are separated into five class-sizes; 68 candidates of approximately Earth-size (radius < 1.25 Earth radii), 288 super-Earth size (1.25 Earth radii < radius < 2 Earth radii), 662 Neptune-size (2 Earth radii < radius < 6 Earth radii), 165 Jupiter-size (6 Earth radii < radius < 15 Earth radii), and 19 up to twice the size of Jupiter (15 Earth radii < radius < 22 Earth radii). In the temperature range appropriate for the habitable zone, 54 candidates are found with sizes ranging from Earth-size to larger than that of Jupiter. Five are less than twice the size of the Earth. Over 74% of the planetary candidates are smaller than Neptune. The observed number versus size distribution of planetary candidates increases to a peak at two to three times Earth-size and then declines inversely proportional to area of the candidate. Our current best estimates of the intrinsic frequencies of planetary candidates, after correcting for geometric and sensitivity biases, are 6% for Earth-size candidates, 7% for super-Earth size candidates, 17% for Neptune-size candidates, and 4% for Jupiter-size candidates. Multi-candidate, transiting systems are frequent; 17% of the host stars have multi-candidate systems, and 33.9% of all the candidates are part of multi-candidate systems.

astro-ph.EP↗

arXiv2011

The Distribution of Transit Durations for Kepler Planet Candidates and Implications for their Orbital Eccentricities

Doppler planet searches have discovered that giant planets follow orbits with a wide range of orbital eccentricities, revolutionizing theories of planet formation. The discovery of hundreds of exoplanet candidates by NASA's Kepler mission enables astronomers to characterize the eccentricity distribution of small exoplanets. Measuring the eccentricity of individual planets is only practical in favorable cases that are amenable to complementary techniques (e.g., radial velocities, transit timing variations, occultation photometry). Yet even in the absence of individual eccentricities, it is possible to study the distribution of eccentricities based on the distribution of transit durations (relative to the maximum transit duration for a circular orbit). We analyze the transit duration distribution of Kepler planet candidates. We find that for host stars with T_eff > 5100 K we cannot invert this to infer the eccentricity distribution at this time due to uncertainties and possible systematics in the host star densities. With this limitation in mind, we compare the observed transit duration distribution with models to rule out extreme distributions. If we assume a Rayleigh eccentricity distribution for Kepler planet candidates, then we find best-fits with a mean eccentricity of 0.1-0.25 for host stars with T_eff < 5100 K. We compare the transit duration distribution for different subsets of Kepler planet candidates and discuss tentative trends with planetary radius and multiplicity. High-precision spectroscopic follow-up observations for a large sample of host stars will be required to confirm which trends are real and which are the results of systematic errors in stellar radii. Finally, we identify planet candidates that must be eccentric or have a significantly underestimated stellar radius.

astro-ph.EP↗

arXiv2011

KOI-126: A Triply-Eclipsing Hierarchical Triple with Two Low-Mass Stars

The Kepler spacecraft has been monitoring the light from 150,000 stars in its primary quest to detect transiting exoplanets. Here we report on the detection of an eclipsing stellar hierarchical triple, identified in the Kepler photometry. KOI-126 (A,(B, C)), is composed of a low-mass binary (masses M_B = 0.2413+/-0.0030 M_Sun, M_C = 0.2127+/-0.0026 M_Sun; radii R_B = 0.2543+/-0.0014 R_Sun, R_C = 0.2318+/-0.0013 R_Sun; orbital period P_1 = 1.76713+/-0.00019 days) on an eccentric orbit about a third star (mass M_A = 1.347+/-0.032 M_Sun; radius R_A = 2.0254+/-0.0098 R_Sun; period of orbit around the low-mass binary P_2 = 33.9214+/-0.0013 days; eccentricity of that orbit e_2 = 0.3043+/-0.0024). The low-mass pair probe the poorly sampled fully-convective stellar domain offering a crucial benchmark for theoretical stellar models.

astro-ph.SR↗

arXiv2010

Effective Temperature in an Interacting, Externally Driven, Vertex System: Theory and Experiment on Artificial Spin Ice

Frustrated arrays of interacting single-domain nanomagnets provide important model systems for statistical mechanics, because they map closely onto well-studied vertex models and are amenable to direct imaging and custom engineering. Although these systems are manifestly athermal, we demonstrate that the statistical properties of both hexagonal and square lattices can be described by an effective temperature based on the magnetostatic energy of the arrays. This temperature has predictive power for the moment configurations and is intimately related to how the moments are driven by an oscillating external field.

cond-mat.stat-mech↗

arXiv2010

Kepler Mission Design, Realized Photometric Performance, and Early Science

The Kepler Mission, launched on Mar 6, 2009 was designed with the explicit capability to detect Earth-size planets in the habitable zone of solar-like stars using the transit photometry method. Results from just forty-three days of data along with ground-based follow-up observations have identified five new transiting planets with measurements of their masses, radii, and orbital periods. Many aspects of stellar astrophysics also benefit from the unique, precise, extended and nearly continuous data set for a large number and variety of stars. Early results for classical variables and eclipsing stars show great promise. To fully understand the methodology, processes and eventually the results from the mission, we present the underlying rationale that ultimately led to the flight and ground system designs used to achieve the exquisite photometric performance. As an example of the initial photometric results, we present variability measurements that can be used to distinguish dwarf stars from red giants.

astro-ph.EP↗

arXiv2010

On the Model Transform in Stochastic Network Calculus

Stochastic network calculus requires special care in the search of proper stochastic traffic arrival models and stochastic service models. Tradeoff must be considered between the feasibility for the analysis of performance bounds, the usefulness of performance bounds, and the ease of their numerical calculation. In theory, transform between different traffic arrival models and transform between different service models are possible. Nevertheless, the impact of the model transform on performance bounds has not been thoroughly investigated. This paper is to investigate the effect of the model transform and to provide practical guidance in the model selection in stochastic network calculus.

cs.PF↗

arXiv2010

Discovery and Rossiter-McLaughlin Effect of Exoplanet Kepler-8b

We report the discovery and the Rossiter-McLaughlin effect of Kepler-8b, a transiting planet identified by the NASA Kepler Mission. Kepler photometry and Keck-HIRES radial velocities yield the radius and mass of the planet around this F8IV subgiant host star. The planet has a radius RP = 1.419 RJ and a mass, MP = 0.60 MJ, yielding a density of 0.26 g cm^-3, among the lowest density planets known. The orbital period is P = 3.523 days and orbital semima jor axis is 0.0483+0.0006/-0.0012 AU. The star has a large rotational v sin i of 10.5 +/- 0.7 km s^-1 and is relatively faint (V = 13.89 mag), both properties deleterious to precise Doppler measurements. The velocities are indeed noisy, with scatter of 30 m s^-1, but exhibit a period and phase consistent with the planet implied by the photometry. We securely detect the Rossiter-McLaughlin effect, confirming the planet's existence and establishing its orbit as prograde. We measure an inclination between the projected planetary orbital axis and the projected stellar rotation axis of lambda = -26.9 +/- 4.6 deg, indicating a moderate inclination of the planetary orbit. Rossiter-McLaughlin measurements of a large sample of transiting planets from Kepler will provide a statistically robust measure of the true distribution of spin-orbit orientations for hot jupiters in general.

astro-ph.EP↗

arXiv2010

Initial Characteristics of Kepler Long Cadence Data For Detecting Transiting Planets

The Kepler Mission seeks to detect Earth-size planets transiting solar-like stars in its ~115 deg^2 field of view over the course of its 3.5 year primary mission by monitoring the brightness of each of ~156,000 Long Cadence stellar targets with a time resolution of 29.4 minutes. We discuss the photometric precision achieved on timescales relevant to transit detection for data obtained in the 33.5-day long Quarter 1 (Q1) observations that ended 2009 June 15. The lower envelope of the photometric precision obtained at various timescales is consistent with expected random noise sources, indicating that Kepler has the capability to fulfill its mission. The Kepler light curves exhibit high precision over a large dynamic range, which will surely permit their use for a large variety of investigations in addition to finding and characterizing planets. We discuss the temporal characteristics of both the raw flux time series and the systematic error-corrected flux time series produced by the Kepler Science Pipeline, and give examples illustrating Kepler's large dynamic range and the variety of light curves obtained from the Q1 observations.

astro-ph.EP↗

arXiv2010

Overview of the Kepler Science Processing Pipeline

The Kepler Mission Science Operations Center (SOC) performs several critical functions including managing the ~156,000 target stars, associated target tables, science data compression tables and parameters, as well as processing the raw photometric data downlinked from the spacecraft each month. The raw data are first calibrated at the pixel level to correct for bias, smear induced by a shutterless readout, and other detector and electronic effects. A background sky flux is estimated from ~4500 pixels on each of the 84 CCD readout channels, and simple aperture photometry is performed on an optimal aperture for each star. Ancillary engineering data and diagnostic information extracted from the science data are used to remove systematic errors in the flux time series that are correlated with these data prior to searching for signatures of transiting planets with a wavelet-based, adaptive matched filter. Stars with signatures exceeding 7.1 sigma are subjected to a suite of statistical tests including an examination of each star's centroid motion to reject false positives caused by background eclipsing binaries. Physical parameters for each planetary candidate are fitted to the transit signature, and signatures of additional transiting planets are sought in the residual light curve. The pipeline is operational, finding planetary signatures and providing robust eliminations of false positives.

astro-ph.EP↗

arXiv2010

Instrument Performance in Kepler's First Months

The Kepler Mission relies on precise differential photometry to detect the 80 parts per million (ppm) signal from an Earth-Sun equivalent transit. Such precision requires superb instrument stability on time scales up to ~2 days and systematic error removal to better than 20 ppm. To this end, the spacecraft and photometer underwent 67 days of commissioning, which included several data sets taken to characterize the photometer performance. Because Kepler has no shutter, we took a series of dark images prior to the dust cover ejection, from which we measured the bias levels, dark current, and read noise. These basic detector properties are essentially unchanged from ground-based tests, indicating that the photometer is working as expected. Several image artifacts have proven more complex than when observed during ground testing, as a result of their interactions with starlight and the greater thermal stability in flight, which causes the temperature-dependent artifact variations to be on the timescales of transits. Because of Kepler's unprecedented sensitivity and stability, we have also seen several unexpected systematics that affect photometric precision. We are using the first 43 days of science data to characterize these effects and to develop detection and mitigation methods that will be implemented in the calibration pipeline. Based on early testing, we expect to attain Kepler's planned photometric precision over 80%-90% of the field of view.

astro-ph.EP↗