arXiv subjects

Jonathan Simon

Publications and source records attributed to Jonathan Simon.

At least 19 recordsLinked to original sources

arXiv2026

Strategic Plan for Neutral Atom Quantum Computation

We present a strategic plan for neutral atom quantum computation, bringing together hardware development and theory advancements to achieve the goal of practical quantum advantage. The concept of practical quantum advantage is defined, along with how to verify claims of advantage, and approaches to designing quantum algorithms that deliver practical advantage. Future directions for neutral atom quantum processor hardware are described: scaling-up system size, Qubit encodings and atomic platforms, going further below threshold with neutral-atom logical-qubit performance, continuous reloading of qubits, and fast readout. We also explore opportunities for scalable integrated photonic control technologies. Alongside hardware advancements, new developments in quantum error correction and compilation of quantum circuits are proposed. Finally, we examine the opportunity of networking multiple neutral atom quantum processors together to perform distributed quantum computing and overcome possible limitations of a single system.

quant-ph↗

arXiv2026

Ultrabroadband Passive Laser Noise Suppression to Quantum Noise Limit through on-chip Second Harmonic Generation

Laser intensity noise limits performance in quantum sensing, metrology, and computing. Existing stabilization methods face a trade-off between bandwidth and complexity: electronic feedback loops are speed-limited, while optical resonators are constrained by narrow linewidths and locking requirements. Here, we demonstrate an all-optical "noise eater" that passively suppresses intensity fluctuations from DC to >10 gigahertz. By leveraging high-efficiency second-harmonic generation in nanophotonic lithium niobate waveguides, we operate at a pump-depletion stationary point where input fluctuations are decoupled from the output to first order. This passive and nonresonant nanophotonic device suppresses relative intensity noise by 25 to 60 dB over the full measurement bandwidth and stabilizes a noisy fiber amplifier output to the shot-noise limit. Our results establish a scalable, wide-bandwidth paradigm for laser stabilization essential for high-throughput quantum technologies and deployable photonic sensing systems.

physics.optics↗

arXiv2026

Stability, degeneracy, and scalability of a 600-site cavity array microscope

Optical cavities are a foundational technology for controlling light-matter interactions. While interfacing a single cavity to either an atom or ensemble has become a standard tool, the advent of single atom control in large atomic arrays has spurred interest in a new frontier of ``many-cavity QED,'' featuring many independent resonators capable of separately addressing individual quantum emitters. In this fast-evolving landscape, the cavity array microscope was recently introduced -- employing free space intra-cavity optics to engineer a two-dimensional array of tightly spaced cavity TEM$_{00}$ modes with wavelength-scale waists, ideally suited for interfacing with atom arrays. Here we realize the next-generation of this architecture, achieving hundreds of degenerate cavity modes with improved, uniform finesse, and explore the technical features of the system which will enable further scalability. In particular, we study imperfections, including optical aberrations, field of view constraints, array non-degeneracies, and losses from optical elements. We identify the sensitivity to these various vectors and exposit the control knobs and techniques necessary to align and operate the system in a stable manner. Ultimately, we lay out a pathway towards operation with tens of thousands of independent cavities while maintaining compatibility with existing atom arrays, paving the way to myriad applications including highly parallelized remote entanglement generation, fast and non-destructive mid-circuit readout, and the implementation of hybrid atom-photon Hamiltonians.

physics.atom-ph↗

arXiv2026

Quantum-controlled synthetic materials

Analog quantum simulators and digital quantum computers are two distinct paradigms driving near-term applications in modern quantum science, from probing many-body phenomena to identifying computational advantage over classical systems. A transformative opportunity on the horizon is merging the high-fidelity many-body evolution in analog simulators with the robust control and measurement of digital machines. Such a hybrid platform would unlock new capabilities in state preparation, characterization and dynamical control. Here, we embed digital quantum control in the analog evolution of a synthetic quantum material by entangling the lattice potential landscape of a Bose-Hubbard circuit with an ancilla qubit. This Hamiltonian-level control induces dynamics under a superposition of different lattice configurations and guides the many-body system to novel strongly-correlated states where different phases of matter coexist -- ordering photons into superpositions of solid and fluid eigenstates. Leveraging hybrid control modalities, we adiabatically introduce disorder to localize the photons into an entangled cat state and enhance its coherence using a many-body echo technique. This work illustrates the potential for entangling quantum computers with quantum matter -- synthetic and solid-state -- for advantage in sensing and materials characterization.

quant-ph↗

arXiv2026

A 10 Megahertz Spatial Light Modulator

Rapid and programmable shaping of light fields is central to modern microscopy, display technologies, optical communications and sensing, quantum engineering, and quantum information processing. Current wavefront shaping technologies face a fundamental dichotomy: liquid-crystal-on-silicon spatial light modulators (LCoS-SLMs) offer high pixel count but suffer from low refresh rates, while acousto-optic deflectors (AODs) provide moderate speed with restricted optical beam geometries. Though recent advances in photonic integrated circuits achieve fast switching, there is currently no tool that provides MHz-rate, continuous motion, and arbitrarily reconfigurable control over a set of diffraction-limited spots. Here we introduce a new class of spatial light modulator that provides both 2D pixel geometry and high speed. The device operates by encoding spatial information in frequency bins via a broadband optical phase modulator, and decoding them via a first-of-its-kind, high-resolution 2D spectrometer. The spectrometer, based on the architecture which we call the Re-Imaging Phased Array (RIPA), achieves its sensitivity through long path-lengths, enabled by intra-spectrometer re-imaging lens-guides. We demonstrate site-resolved optical pulsing with a 44(1)~ns rise time, corresponding to frame rates exceeding 10 million frames per second, as well as arbitrary, reconfigurable 2D addressing and multi-site operations, including asynchronous, independent beam motion, splitting, and recombination. Leveraging these tools opens new horizons in rapid optical manipulation of matter across science, from fast, scalable control that approaches the inertial and radiation limits of atoms in quantum processors, to dynamically programmable, microsecond-resolved illumination in microscopy and neuro-biological imaging.

quant-ph↗

arXiv2025

Consciousness in Artificial Intelligence? A Framework for Classifying Objections and Constraints

We develop a taxonomical framework for classifying challenges to the possibility of consciousness in digital artificial intelligence systems. This framework allows us to identify the level of granularity at which a given challenge is intended (the levels we propose correspond to Marr's levels) and to disambiguate its degree of force: is it a challenge to computational functionalism that leaves the possibility of digital consciousness open (degree 1), a practical challenge to digital consciousness that suggests improbability without claiming impossibility (degree 2), or an argument claiming that digital consciousness is strictly impossible (degree 3)? We apply this framework to 14 prominent examples from the scientific and philosophical literature. Our aim is not to take a side in the debate, but to provide structure and a tool for disambiguating between challenges to computational functionalism and challenges to digital consciousness, as well as between different ways of parsing such challenges.

cs.AI↗

arXiv2025

A Second-Order Optical Butterworth Fabry-P\'erot Filter

Filters with flat-top pass-bands are a key enabling technology for signal processing. From communication to sensing, the ability to choose a pass \emph{band}, rather than a single pass \emph{frequency}, while still efficiently suppressing backgrounds at other frequencies, is a critical capability for ensuring both detection sensitivity and power efficiency. Efficient transmission of a single frequency can be achieved by a single-pole resonator -- which in optics is a Fabry-P\'erot cavity offering linewidths from kHz to GHz and beyond. Coupling multiple resonators allows for the construction of flat-top multi-pole filters. These, although straightforward from RF to THz where resonators are macroscopic and tunable, are more difficult to control in the optical band and typically realized with dielectric stacks, whose passband widths exceed 100 GHz. Here, we bridge the gap to narrower bandwidth flat-top filters by proposing and implementing a second-order Butterworth-type optical filter in a single two-mirror Fabry-P\'erot cavity, by coupling the two polarization modes. We demonstrate a pass-band width of 2.68(1)~GHz, a maximum stopband suppression of 43~dB, and a passband insertion loss of 2.2(1)~dB, with out-of-band power suppression falling as the fourth power of detuning. This approach is viable down to much narrower filters, and has the potential to improve high-frequency phase noise performance of lasers, enhance the sensitivity of LIDARs, and provide higher quality narrowband filtering, for example, for Raman spectroscopy.

physics.optics↗

arXiv2025

Multi-Turn Puzzles: Evaluating Interactive Reasoning and Strategic Dialogue in LLMs

Large language models (LLMs) excel at solving problems with clear and complete statements, but often struggle with nuanced environments or interactive tasks which are common in most real-world scenarios. This highlights the critical need for developing LLMs that can effectively engage in logically consistent multi-turn dialogue, seek information and reason with incomplete data. To this end, we introduce a novel benchmark comprising a suite of multi-turn tasks each designed to test specific reasoning, interactive dialogue, and information-seeking abilities. These tasks have deterministic scoring mechanisms, thus eliminating the need for human intervention. Evaluating frontier models on our benchmark reveals significant headroom. Our analysis shows that most errors emerge from poor instruction following, reasoning failures, and poor planning. This benchmark provides valuable insights into the strengths and weaknesses of current LLMs in handling complex, interactive scenarios and offers a robust platform for future research aimed at improving these critical capabilities.

cs.CL↗

arXiv2025

A cavity array microscope for parallel single-atom interfacing

Neutral atom arrays and optical cavity QED systems have developed in parallel as central pillars of modern experimental quantum science. While each platform has demonstrated exceptional capabilities-such as high-fidelity quantum logic in atom arrays, and strong light-matter coupling in cavities-their combination holds promise for realizing fast and non-destructive atom measurement, building large-scale quantum networks, and engineering hybrid atom-photon Hamiltonians. However, to date, experiments integrating the two platforms have been limited to spatially interfacing the entire atom array with one global cavity mode, a configuration that constrains addressability, parallelism, and scalability. Here we introduce the cavity array microscope, an experimental platform where each individual atom is strongly coupled to its own individual cavity across a two-dimensional array of over 40 modes. Our approach requires no nanophotonic elements, and instead uses a new free-space cavity geometry with intra-cavity lenses to realize above-unity peak cooperativity with micron-scale mode waists and spacings, compatible with typical atom array length scales while keeping atoms far from dielectric surfaces. We achieve homogeneous atom-cavity coupling, and show fast, non-destructive, parallel readout on millisecond timescales, including through a fiber array as a proof-of-principle for networking applications. As an outlook, we realize a next-generation iteration of the platform with over 500 cavities and a nearly 10 times improvement in finesse. Our work unlocks the regime of many-cavity QED, and opens an unexplored frontier of large-scale quantum networking with atom arrays.

quant-ph↗

arXiv2025

Light-controlled strong coupling of optical cavity modes spaced by 200 THz

Cavities have driven significant advances in optical physics and quantum science, with applications ranging from lasers and spectroscopy to quantum information processing, simulation and metrology. For standard optical cavities, each eigenmode corresponds to a single, well-defined frequency. Here, we present a macroscopic optical Fabry-P\'erot cavity whose eigenmodes are coherent superpositions of two frequency modes in the VIS-NIR range. Specifically, we demonstrate strong coupling between 384 THz (780 nm) and 580 THz (516 nm) cavity modes by incorporating an intracavity $\chi^{(2)}$ crystal driven by a non-resonant optical pump at 1529 nm. Strong coupling enables us to demonstrate frequency conversion with an end-to-end, free-space conversion efficiency of 30(1)%, limited by current cavity design and internal cavity losses. We also demonstrate coupling between distinct spatial modes at the two frequencies, extending coherent control to the spatial basis. In conjunction with improved resonator design and low-loss nonlinear crystals, we anticipate a factor of $>$50 increase in two-mode-cooperativity for stronger coupling and near-unity conversion efficiency at low pump powers. This platform opens new avenues for cavity-QED experiments, with potential applications spanning cavity-mediated interactions between distinct atomic species, interconnects for quantum networking and modular computing, and spatially multimode cavity physics.

physics.atom-ph↗

arXiv2024

Millimeter-Wave Superconducting Qubit

Manipulating the electromagnetic spectrum at the single-photon level is fundamental for quantum experiments. In the visible and infrared range, this can be accomplished with atomic quantum emitters, and with superconducting qubits such control is extended to the microwave range (below 10 GHz). Meanwhile, the region between these two energy ranges presents an unexplored opportunity for innovation. We bridge this gap by scaling up a superconducting qubit to the millimeter-wave range (near 100 GHz). Working in this energy range greatly reduces sensitivity to thermal noise compared to microwave devices, enabling operation at significantly higher temperatures, up to 1 K. This has many advantages by removing the dependence on rare $^3$He for refrigeration, simplifying cryogenic systems, and providing orders of magnitude higher cooling power, lending the flexibility needed for novel quantum sensing and hybrid experiments. Using low-loss niobium trilayer junctions, we realize a qubit at 72 GHz cooled to 0.87 K using only $^4$He. We perform Rabi oscillations to establish control over the qubit state, and measure relaxation and dephasing times of 15.8 and 17.4 ns respectively. This demonstration of a millimeter-wave quantum emitter offers exciting prospects for enhanced sensitivity thresholds in high-frequency photon detection, provides new options for quantum transduction and for scaling up and speeding up quantum computing, enables integration of quantum systems where $^3$He refrigeration units are impractical, and importantly paves the way for quantum experiments exploring a novel energy range.

quant-ph↗

arXiv2024

Superconducting Qubits Above 20 GHz Operating over 200 mK

Current state-of-the-art superconducting microwave qubits are cooled to extremely low temperatures to avoid sources of decoherence. Higher qubit operating temperatures would significantly increase the cooling power available, which is desirable for scaling up the number of qubits in quantum computing architectures and integrating qubits in experiments requiring increased heat dissipation. To operate superconducting qubits at higher temperatures, it is necessary to address both quasiparticle decoherence (which becomes significant for aluminum junctions above 160 mK) and dephasing from thermal microwave photons (which are problematic above 50 mK). Using low-loss niobium trilayer junctions, which have reduced sensitivity to quasiparticles due to niobium's higher superconducting transition temperature, we fabricate transmons with higher frequencies than previously studied, up to 24 GHz. We measure decoherence and dephasing times of about 1 us, corresponding to average qubit quality factors of approximately $10^5$, and find that decoherence is unaffected by quasiparticles up to 1 K. Without relaxation from quasiparticles, we are able to explore dephasing from purely thermal sources, finding that our qubits can operate up to approximately 250 mK while maintaining similar performance. The thermal resilience of these qubits creates new options for scaling up quantum processors, enables hybrid quantum experiments with high heat dissipation budgets, and introduces a material platform for even higher-frequency qubits.

quant-ph↗

arXiv2023

Low-loss Millimeter-wave Resonators with an Improved Coupling Structure

Millimeter-wave superconducting resonators are a useful tool for studying quantum device coherence in a new frequency domain. However, improving resonators is difficult without a robust and reliable method for coupling millimeter-wave signals to 2D structures. We develop and characterize a tapered transition structure coupling a rectangular waveguide to a planar slotline waveguide with better than 0.5 dB efficiency over 14 GHz, and use it to measure ground-shielded resonators in the W band (75 - 110 GHz). Having decoupled the resonators from radiative losses, we consistently achieve single-photon quality factors above $10^5$, with a two-level-system loss limit above $10^6$, and verify the effectiveness of oxide removal treatments to reduce loss. These values are 4-5 times higher than those previously reported in the W band, and much closer to typical planar microwave resonators. The improved losses demonstrated by these on-chip millimeter-wave devices shed new light on quantum decoherence in a different frequency regime, offer increased selectivity for high-frequency detectors, and enables new possibilities for hybrid quantum experiments integrating millimeter-wave frequencies.

quant-ph↗

arXiv2023

Manybody Interferometry of Quantum Fluids

Characterizing strongly correlated matter is an increasingly central challenge in quantum science, where structure is often obscured by massive entanglement. From semiconductor heterostructures and 2D materials to synthetic atomic, photonic and ionic quantum matter, progress in preparation of manybody quantum states is accelerating, opening the door to new approaches to state characterization. It is becoming increasingly clear that in the quantum regime, state preparation and characterization should not be treated separately - entangling the two processes provides a quantum advantage in information extraction. From Loschmidt echo to measure the effect of a perturbation, to out-of-time-order-correlators (OTOCs) to characterize scrambling and manybody localization, to impurity interferometry to measure topological invariants, and even quantum Fourier transform-enhanced sensing, protocols that blur the distinction between state preparation and characterization are becoming prevalent. Here we present a new approach which we term 'manybody Ramsey interferometry' that combines adiabatic state preparation and Ramsey spectroscopy: leveraging our recently-developed one-to-one mapping between computational-basis states and manybody eigenstates, we prepare a superposition of manybody eigenstates controlled by the state of an ancilla qubit, allow the superposition to evolve relative phase, and then reverse the preparation protocol to disentangle the ancilla while localizing phase information back into it. Ancilla tomography then extracts information about the manybody eigenstates, the associated excitation spectrum, and thermodynamic observables. This work opens new avenues for characterizing manybody states, paving the way for quantum computers to efficiently probe quantum matter.

quant-ph↗

arXiv2023

Consciousness in Artificial Intelligence: Insights from the Science of Consciousness

Whether current or near-term AI systems could be conscious is a topic of scientific interest and increasing public concern. This report argues for, and exemplifies, a rigorous and empirically grounded approach to AI consciousness: assessing existing AI systems in detail, in light of our best-supported neuroscientific theories of consciousness. We survey several prominent scientific theories of consciousness, including recurrent processing theory, global workspace theory, higher-order theories, predictive processing, and attention schema theory. From these theories we derive "indicator properties" of consciousness, elucidated in computational terms that allow us to assess AI systems for these properties. We use these indicator properties to assess several recent AI systems, and we discuss how future systems might implement them. Our analysis suggests that no current AI systems are conscious, but also suggests that there are no obvious technical barriers to building AI systems which satisfy these indicators.

cs.AI↗

arXiv2023

Improved Coherence in Optically-Defined Niobium Trilayer Junction Qubits

Niobium offers the benefit of increased operating temperatures and frequencies for Josephson junctions, which are the core component of superconducting devices. However existing niobium processes are limited by more complicated fabrication methods and higher losses than now-standard aluminum junctions. Combining recent trilayer fabrication advancements, methods to remove lossy dielectrics and modern superconducting qubit design, we revisit niobium trilayer junctions and fabricate all-niobium transmons using only optical lithography. We characterize devices in the microwave domain, measuring coherence times up to $62~\mu$s and an average qubit quality factor above $10^5$: much closer to state-of-the-art aluminum-junction devices. We find the higher superconducting gap energy also results in reduced quasiparticle sensitivity above $0.16~$K, where aluminum junction performance deteriorates. Our junction process is readily applied to standard optical-based foundry processes, opening new avenues for direct integration and scalability, and paves the way for higher-temperature and higher-frequency quantum devices.

quant-ph↗

arXiv2023

Sources of Richness and Ineffability for Phenomenally Conscious States

Conscious states (states that there is something it is like to be in) seem both rich or full of detail, and ineffable or hard to fully describe or recall. The problem of ineffability, in particular, is a longstanding issue in philosophy that partly motivates the explanatory gap: the belief that consciousness cannot be reduced to underlying physical processes. Here, we provide an information theoretic dynamical systems perspective on the richness and ineffability of consciousness. In our framework, the richness of conscious experience corresponds to the amount of information in a conscious state and ineffability corresponds to the amount of information lost at different stages of processing. We describe how attractor dynamics in working memory would induce impoverished recollections of our original experiences, how the discrete symbolic nature of language is insufficient for describing the rich and high-dimensional structure of experiences, and how similarity in the cognitive function of two individuals relates to improved communicability of their experiences to each other. While our model may not settle all questions relating to the explanatory gap, it makes progress toward a fully physicalist explanation of the richness and ineffability of conscious experience: two important aspects that seem to be part of what makes qualitative character so puzzling.

q-bio.NC↗

arXiv2023

A Cavity Load Lock Apparatus for Next-Generation Quantum Optics Experiments

Cavity quantum electrodynamics (QED), the study of the interaction between quantized emitters and photons confined in an optical cavity, is an important tool for quantum science in computing, networking, and synthetic matter. In atomic cavity QED, this approach typically relies upon an ultra-high vacuum chamber that hosts a cold trapped atomic ensemble and an optical cavity. Upgrading the cavity necessitates a months-long laborious process of removing external optics, venting, replacing the resonator, baking, and replacing optics, constituting a substantial bottleneck to innovation in resonator design. In this work, we demonstrate that the flexibility of optical cavities, and the quick turnaround time in switching between them, can be restored with the vacuum loadlock technique--reducing the cycle time to install a cavity, bake it, and transport it into the science chamber to days, achieving 3x10^(-10) Torr pressure in the science chamber. By reducing vacuum limitations, this approach is particularly powerful for labs interested in quickly exploring novel optic cavities, or any other atomic physics relying on in-vacuum optics.

quant-ph↗