arXiv subjects

Kaspar Althoefer

Publications and source records attributed to Kaspar Althoefer.

At least 19 recordsLinked to original sources

arXiv2026

Layered e-skin for Shear Sensing

This paper presents a stacked two-layer force-sensing resistor (FSR) array designed for robotic fingertips that combines high-resolution pressure mapping with shear-force estimation. A compliant lattice elastomer spacer converts shear loading into a measurable inter-layer displacement, producing relative center-of-pressure (CoP) shifts between layers. A physics-based moment balance links inter-layer CoP displacement to shear force, while an end-to-end CNN--GRU model captures nonlinear effects from load-dependent compression and contact redistribution. This model, with both layers as input, achieves coefficients of determination $R^2 = 0.914$ for $F_x$ and $R^2 = 0.944$ for $F_y$, consistently outperforming single-layer baselines for shear-force estimation. Robotic manipulation experiments show that, for contact-motion tracking, the deep layer tracks the translation and rotation imposed by the robot arm, whereas the superficial layer tracks the slip at the contact surface. Transient changes in the difference between the total pressure responses of the two layers provide the best slip-event detection performance among the tested cues. These results demonstrate that two-layer FSR arrays can provide three-axis force estimation, contact-motion tracking, and slip-event detection beyond conventional normal-force sensing.

cs.RO↗

arXiv2026

A Multi-Vine Soft Robot Enabling Accessible Working Channel and Steering

Soft eversion robots, also known as vine robots, have attracted growing interest for navigation and inspection tasks, including minimally invasive medical applications [1]. A vine robot consists of a thin, flexible, inextensible tube folded inward that everts and grows forward when pressurized. This tip-growth enables navigation with minimal friction, making vine robots well suited for complex environments such as the human colon [2]. While their inherent softness allows passive conforma- tion to curved pathways in confined spaces, navigation performance strongly depends on environmental inter- actions, including contact angle and the length of un- constrained deployed material [3], [4]. Sharp directional changes, such as those in the sigmoid colon, often limit passive growth and necessitate active steering. Existing solutions include distributed artificial muscles [5] or dedicated tip-based steering mechanisms [6]. In addition, many applications require payload delivery, such as sensors and tools [7], [8]. Within the ERC Synergy project EndoTheranostics, this motivates the development of vine robots capable of delivering micro- surgical tools during growth. Prior work has integrated working channels within the vine body [8], [9], but these approaches constrain tool size, introduce friction, and limit access to the environment to the robot tip. In this work, we propose a multi-vine architecture in which two vine robots are coupled to an externally integrated working channel via soft mounting tips [10]. Independent vine actuation enables active tip steering while advancing the working channel without embed- ding it within the vine bodies Figure 1. Experiments demonstrate sharp steering of nearly 90 degrees during growth, highlighting the potential of this architecture for versatile medical and non-medical applications.

cs.RO↗

arXiv2026

Soft Eversion Robots for Colonoscopy: Challenges, Open Problems, and Emerging Solutions

Conventional colonoscopy remains limited by patient discomfort and procedural risks, motivating research into compliant robotic alternatives. Eversion robots, which advance via pressure-driven tip growth, eliminate sliding friction against the colon wall and offer a less intrusive approach to traversal. However, no existing design simultaneously satisfies all clinical requirements. This paper benchmarks four recent eversion robot architectures against the key anatomical and clinical constraints of colonoscopy, including colon length, minimum luminal diameter, bending angle, and working-channel needs. We identify the central trade-offs each design reveals, particularly the difficulty of integrating steering and payload delivery without sacrificing the soft, low-friction behaviour that makes eversion robots attractive. We then provide design guidance across material selection, steering strategy, and payload delivery, and highlight open problems for clinical translation.

cs.RO↗

arXiv2026

6G Empowering Future Robotics: A Vision for Next-Generation Autonomous Systems

The convergence of robotics and next-generation communication is a critical driver of technological advancement. As the world transitions from 5G to 6G, the foundational capabilities of wireless networks are evolving to support increasingly complex and autonomous systems. We examine the transformative impact of 6G on enhancing key robotics functionalities. It provides a systematic mapping of IMT-2030 key performance indicators to robotic functional blocks, including sensing, perception, cognition, actuation, and self-learning. Building upon this mapping, we propose a high-level architectural framework integrating robotic, intelligent, and network service planes, underscoring the need for a holistic approach. As an example, use case, we present a real-time, dynamic safety framework enabled by IMT-2030 capabilities for safe and efficient human-robot collaboration in shared spaces.

cs.NI↗

arXiv2026

A Soft Robotic Interface for Chick-Robot Affective Interactions

The potential of Animal-Robot Interaction (ARI) in welfare applications depends on how much an animal perceives a robotic agent as socially relevant, non-threatening and potentially attractive (acceptance). Here, we present an animal-centered soft robotic affective interface for newly hatched chicks (Gallus gallus). The soft interface provides safe and controllable cues, including warmth, breathing-like rhythmic deformation, and face-like visual stimuli. We evaluated chick acceptance of the interface and chick-robot interactions by measuring spontaneous approach and touch responses during video tracking. Overall, chicks approached and spent increasing time on or near the interface, demonstrating acceptance of the device. Across different layouts, chicks showed strong preference for warm thermal stimulation, which increased over time. Face-like visual cues elicited a swift and stable preference, speeding up the initial approach to the tactile interface. Although the breathing cue did not elicit any preference, neither did it trigger avoidance, paving the way for further exploration. These findings translate affective interface concepts to ARI, demonstrating that appropriate soft, thermal and visual stimuli can sustain early chick-robot interactions. This work establishes a reliable evaluation protocol and a safe baseline for designing multimodal robotic devices for animal welfare and neuroscientific research.

cs.RO↗

arXiv2026

Robotic Fruits with Tunable Stiffness and Sensing: Towards a Methodology for Developing Realistic Physical Twins of Fruits

The global agri-food sector faces increasing challenges from labour shortages, high consumer demand, and supply-chain disruptions, resulting in substantial losses of unharvested produce. Robotic harvesting has emerged as a promising alternative; however, evaluating and training soft grippers for delicate fruits remains difficult due to the highly variable mechanical properties of natural produce. This makes it difficult to establish reliable benchmarks or data-driven control strategies. Existing testing practices rely on large quantities of real fruit to capture this variability, leading to inefficiency, higher costs, and waste. The methodology presented in this work aims to address these limitations by developing tunable soft physical twins that emulate the stiffness characteristics of real fruits at different ripeness levels. A fiber-reinforced pneumatic physical twin of a kiwi fruit was designed and fabricated to replicate the stiffness at different ripeness levels. Experimental results show that the stiffness of the physical twin can be tuned accurately over multiple trials (97.35 - 99.43% accuracy). Gripping tasks with a commercial robotic gripper showed that sensor feedback from the physical twin can reflect the applied gripping forces. Finally, a stress test was performed over 50 cycles showed reliable maintenance of desired stiffness (0.56 - 1.10% error). This work shows promise that robotic physical twins could adjust their stiffness to resemble that of real fruits. This can provide a sustainable, controllable platform for benchmarking and training robotic grippers.

cs.RO↗

arXiv2026

Human Emotion-Mediated Soft Robotic Arts: Exploring the Intersection of Human Emotions, Soft Robotics and Arts

Soft robotics has emerged as a versatile field with applications across various domains, from healthcare to industrial automation, and more recently, art and interactive installations. The inherent flexibility, adaptability, and safety of soft robots make them ideal for applications that require delicate, organic, and lifelike movement, allowing for immersive and responsive interactions. This study explores the intersection of human emotions, soft robotics, and art to establish and create new forms of human emotion-mediated soft robotic art. In this paper, we introduce two soft embodiments: a soft character and a soft flower as an art display that dynamically responds to brain signals based on alpha waves, reflecting different emotion levels. We present how human emotions can be measured as alpha waves based on brain/EEG signals, how we map the alpha waves to the dynamic movements of the two soft embodiments, and demonstrate our proposed concept using experiments. The findings of this study highlight how soft robotics can embody human emotional states, offering a new medium for insightful artistic expression and interaction, and demonstrating how art displays can be embodied.

cs.RO↗

arXiv2026

Enabling High-Curvature Navigation in Eversion Robots through Buckle-Inducing Constrictive Bands

Tip-growing eversion robots are renowned for their ability to access remote spaces through narrow passages. However, achieving reliable navigation remains a significant challenge. Existing solutions often rely on artificial muscles integrated into the robot body or active tip-steering mechanisms. While effective, these additions introduce structural complexity and compromise the defining advantages of eversion robots: their inherent softness and compliance. In this paper, we propose a passive approach to reduce bending stiffness by purposefully introducing buckling points along the robot's outer wall. We achieve this by integrating inextensible diameter-reducing circumferential bands at regular intervals along the robot body facilitating forward motion through tortuous, obstacle cluttered paths. Rather than relying on active steering, our approach leverages the robot's natural interaction with the environment, allowing for smooth, compliant navigation. We present a Cosserat rod-based mathematical model to quantify this behavior, capturing the local stiffness reductions caused by the constricting bands and their impact on global bending mechanics. Experimental results demonstrate that these bands reduce the robot's stiffness when bent at the tip by up to 91 percent, enabling consistent traversal of 180 degree bends with a bending radius of as low as 25 mm-notably lower than the 35 mm achievable by standard eversion robots under identical conditions. The feasibility of the proposed method is further demonstrated through a case study in a colon phantom. By significantly improving maneuverability without sacrificing softness or increasing mechanical complexity, this approach expands the applicability of eversion robots in highly curved pathways, whether in relation to pipe inspection or medical procedures such as colonoscopy.

cs.RO↗

arXiv2025

Advancing Embodied Intelligence in Robotic-Assisted Endovascular Procedures: A Systematic Review of AI Solutions

Endovascular procedures have revolutionized vascular disease treatment, yet their manual execution is challenged by the demands for high precision, operator fatigue, and radiation exposure. Robotic systems have emerged as transformative solutions to mitigate these inherent limitations. A pivotal moment has arrived, where a confluence of pressing clinical needs and breakthroughs in AI creates an opportunity for a paradigm shift toward Embodied Intelligence (EI), enabling robots to navigate complex vascular networks and adapt to dynamic physiological conditions. Data-driven approaches, leveraging advanced computer vision, medical image analysis, and machine learning, drive this evolution by enabling real-time vessel segmentation, device tracking, and anatomical landmark detection. Reinforcement learning and imitation learning further enhance navigation strategies and replicate expert techniques. This review systematically analyzes the integration of EI into endovascular robotics, identifying profound systemic challenges such as the heterogeneity in validation standards and the gap between human mimicry and machine-native capabilities. Based on this analysis, a conceptual roadmap is proposed that reframes the ultimate objective away from systems that supplant clinical decision-making. This vision of augmented intelligence, where the clinician's role evolves into that of a high-level supervisor, provides a principled foundation for the future of the field.

cs.RO↗

arXiv2025

Differential Analysis of Pseudo Haptic Feedback: Novel Comparative Study of Visual and Auditory Cue Integration for Psychophysical Evaluation

Pseudo-haptics exploit carefully crafted visual or auditory cues to trick the brain into "feeling" forces that are never physically applied, offering a low-cost alternative to traditional haptic hardware. Here, we present a comparative psychophysical study that quantifies how visual and auditory stimuli combine to evoke pseudo-haptic pressure sensations on a commodity tablet. Using a Unity-based Rollball game, participants (n = 4) guided a virtual ball across three textured terrains while their finger forces were captured in real time with a Robotous RFT40 force-torque sensor. Each terrain was paired with a distinct rolling-sound profile spanning 440 Hz - 4.7 kHz, 440 Hz - 13.1 kHz, or 440 Hz - 8.9 kHz; crevice collisions triggered additional "knocking" bursts to heighten realism. Average tactile forces increased systematically with cue intensity: 0.40 N, 0.79 N and 0.88 N for visual-only trials and 0.41 N, 0.81 N and 0.90 N for audio-only trials on Terrains 1-3, respectively. Higher audio frequencies and denser visual textures both elicited stronger muscle activation, and their combination further reduced the force needed to perceive surface changes, confirming multisensory integration. These results demonstrate that consumer-grade isometric devices can reliably induce and measure graded pseudo-haptic feedback without specialized actuators, opening a path toward affordable rehabilitation tools, training simulators and assistive interfaces.

cs.HC↗

arXiv2025

TacEva: A Performance Evaluation Framework For Vision-Based Tactile Sensors

Vision-Based Tactile Sensors (VBTSs) are widely used in robotic tasks because of the high spatial resolution they offer and their relatively low manufacturing costs. However, variations in their sensing mechanisms, structural dimension, and other parameters lead to significant performance disparities between existing VBTSs. This makes it challenging to optimize them for specific tasks, as both the initial choice and subsequent fine-tuning are hindered by the lack of standardized metrics. To address this issue, TacEva is introduced as a comprehensive evaluation framework for the quantitative analysis of VBTS performance. The framework defines a set of performance metrics that capture key characteristics in typical application scenarios. For each metric, a structured experimental pipeline is designed to ensure consistent and repeatable quantification. The framework is applied to multiple VBTSs with distinct sensing mechanisms, and the results demonstrate its ability to provide a thorough evaluation of each design and quantitative indicators for each performance dimension. This enables researchers to pre-select the most appropriate VBTS on a task by task basis, while also offering performance-guided insights into the optimization of VBTS design. A list of existing VBTS evaluation methods and additional evaluations can be found on our website: https://stevenoh2003.github.io/TacEva/

cs.RO↗

arXiv2025

Embedding high-resolution touch across robotic hands enables adaptive human-like grasping

Developing robotic hands that adapt to real-world dynamics remains a fundamental challenge in robotics and machine intelligence. Despite significant advances in replicating human hand kinematics and control algorithms, robotic systems still struggle to match human capabilities in dynamic environments, primarily due to inadequate tactile feedback. To bridge this gap, we present F-TAC Hand, a biomimetic hand featuring high-resolution tactile sensing (0.1mm spatial resolution) across 70% of its surface area. Through optimized hand design, we overcome traditional challenges in integrating high-resolution tactile sensors while preserving the full range of motion. The hand, powered by our generative algorithm that synthesizes human-like hand configurations, demonstrates robust grasping capabilities in dynamic real-world conditions. Extensive evaluation across 600 real-world trials demonstrates that this tactile-embodied system significantly outperforms non-tactile-informed alternatives in complex manipulation tasks (p<0.0001). These results provide empirical evidence for the critical role of rich tactile embodiment in developing advanced robotic intelligence, offering new perspectives on the relationship between physical sensing capabilities and intelligent behavior.

cs.RO↗

arXiv2025

Tac-Man: Tactile-Informed Prior-Free Manipulation of Articulated Objects

Integrating robots into human-centric environments such as homes, necessitates advanced manipulation skills as robotic devices will need to engage with articulated objects like doors and drawers. Key challenges in robotic manipulation of articulated objects are the unpredictability and diversity of these objects' internal structures, which render models based on object kinematics priors, both explicit and implicit, inadequate. Their reliability is significantly diminished by pre-interaction ambiguities, imperfect structural parameters, encounters with unknown objects, and unforeseen disturbances. Here, we present a prior-free strategy, Tac-Man, focusing on maintaining stable robot-object contact during manipulation. Without relying on object priors, Tac-Man leverages tactile feedback to enable robots to proficiently handle a variety of articulated objects, including those with complex joints, even when influenced by unexpected disturbances. Demonstrated in both real-world experiments and extensive simulations, it consistently achieves near-perfect success in dynamic and varied settings, outperforming existing methods. Our results indicate that tactile sensing alone suffices for managing diverse articulated objects, offering greater robustness and generalization than prior-based approaches. This underscores the importance of detailed contact modeling in complex manipulation tasks, especially with articulated objects. Advancements in tactile-informed approaches significantly expand the scope of robotic applications in human-centric environments, particularly where accurate models are difficult to obtain. See additional material at https://tacman-aom.github.io.

cs.RO↗

arXiv2025

Tactile Robotics: An Outlook

Robotics research has long sought to give robots the ability to perceive the physical world through touch in an analogous manner to many biological systems. Developing such tactile capabilities is important for numerous emerging applications that require robots to co-exist and interact closely with humans. Consequently, there has been growing interest in tactile sensing, leading to the development of various technologies, including piezoresistive and piezoelectric sensors, capacitive sensors, magnetic sensors, and optical tactile sensors. These diverse approaches utilise different transduction methods and materials to equip robots with distributed sensing capabilities, enabling more effective physical interactions. These advances have been supported in recent years by simulation tools that generate large-scale tactile datasets to support sensor designs and algorithms to interpret and improve the utility of tactile data. The integration of tactile sensing with other modalities, such as vision, as well as with action strategies for active tactile perception highlights the growing scope of this field. To further the transformative progress in tactile robotics, a holistic approach is essential. In this outlook article, we examine several challenges associated with the current state of the art in tactile robotics and explore potential solutions to inspire innovations across multiple domains, including manufacturing, healthcare, recycling and agriculture.

cs.RO↗

arXiv2024

Variable Stiffness & Dynamic Force Sensor for Tissue Palpation

Palpation of human tissue during Minimally Invasive Surgery is hampered due to restricted access. In this extended abstract, we present a variable stiffness and dynamic force range sensor that has the potential to address this challenge. The sensor utilises light reflection to estimate sensor deformation, and from this, the force applied. Experimental testing at different pressures (0, 0.5 and 1 PSI) shows that stiffness and force range increases with pressure. The force calibration results when compared with measured forces produced an average RMSE of 0.016, 0.0715 and 0.1284 N respectively, for these pressures.

physics.med-ph↗

arXiv2024

Haptic Stiffness Perception Using Hand Exoskeletons in Tactile Robotic Telemanipulation

Robotic telemanipulation - the human-guided manipulation of remote objects - plays a pivotal role in several applications, from healthcare to operations in harsh environments. While visual feedback from cameras can provide valuable information to the human operator, haptic feedback is essential for accessing specific object properties that are difficult to be perceived by vision, such as stiffness. For the first time, we present a participant study demonstrating that operators can perceive the stiffness of remote objects during real-world telemanipulation with a dexterous robotic hand, when haptic feedback is generated from tactile sensing fingertips. Participants were tasked with squeezing soft objects by teleoperating a robotic hand, using two methods of haptic feedback: one based solely on the measured contact force, while the second also includes the squeezing displacement between the leader and follower devices. Our results demonstrate that operators are indeed capable of discriminating objects of different stiffness, relying on haptic feedback alone and without any visual feedback. Additionally, our findings suggest that the displacement feedback component may enhance discrimination with objects of similar stiffness.

cs.RO↗

arXiv2024

Leveraging Tactile Sensing to Render both Haptic Feedback and Virtual Reality 3D Object Reconstruction in Robotic Telemanipulation

Dexterous robotic manipulator teleoperation is widely used in many applications, either where it is convenient to keep the human inside the control loop, or to train advanced robot agents. So far, this technology has been used in combination with camera systems with remarkable success. On the other hand, only a limited number of studies have focused on leveraging haptic feedback from tactile sensors in contexts where camera-based systems fail, such as due to self-occlusions or poor light conditions like smoke. This study demonstrates the feasibility of precise pick-and-place teleoperation without cameras by leveraging tactile-based 3D object reconstruction in VR and providing haptic feedback to a blindfolded user. Our preliminary results show that integrating these technologies enables the successful completion of telemanipulation tasks previously dependent on cameras, paving the way for more complex future applications.

cs.RO↗

arXiv2024

Hydraulic Volumetric Soft Everting Vine Robot Steering Mechanism for Underwater Exploration

Despite a significant proportion of the Earth being covered in water, exploration of what lies below has been limited due to the challenges and difficulties inherent in the process. Current state of the art robots such as Remotely Operated Vehicles (ROVs) and Autonomous Underwater Vehicles (AUVs) are bulky, rigid and unable to conform to their environment. Soft robotics offers solutions to this issue. Fluid-actuated eversion or growing robots, in particular, are a good example. While current eversion robots have found many applications on land, their inherent properties make them particularly well suited to underwater environments. An important factor when considering underwater eversion robots is the establishment of a suitable steering mechanism that can enable the robot to change direction as required. This project proposes a design for an eversion robot that is capable of steering while underwater, through the use of bending pouches, a design commonly seen in the literature on land-based eversion robots. These bending pouches contract to enable directional change. Similar to their land-based counterparts, the underwater eversion robot uses the same fluid in the medium it operates in to achieve extension and bending but also to additionally aid in neutral buoyancy. The actuation method of bending pouches meant that robots needed to fully extend before steering was possible. Three robots, with the same design and dimensions were constructed from polyethylene tubes and tested. Our research shows that although the soft eversion robot design in this paper was not capable of consistently generating the same amounts of bending for the inflation volume, it still achieved suitable bending at a range of inflation volumes and was observed to bend to a maximum angle of 68 degrees at 2000 ml, which is in line with the bending angles reported for land-based eversion robots in the literature.

cs.RO↗