arXiv subjects

Kevin Luke

Publications and source records attributed to Kevin Luke.

16 recordsLinked to original sources

arXiv2026

CHIME/Slow overview and pilot survey: A new backend to search for second-duration radio transients with the CHIME telescope

We present an overview of CHIME/Slow, a real-time transient search backend under development to search for second-duration radio transients using the CHIME telescope, and results obtained from a pilot survey carried out using the prototype version of the search pipeline. The prototype CHIME/Slow pipeline was tested on archival data obtained in December 2022, January 2023 and February 2023 with a total on-sky time of 17 days with an instantaneous Field of View (FoV) of $\sim$13 deg$^2$ . In this pilot survey, we detected nine bursts, one from a new non-repeating source and eight from the known hyperactive repeating source FRB 20220912A. Out of these nine bursts, two bursts from the repeater were not detected by CHIME/FRB, while the non-repeater was detected in the side-lobe of a beam in the CHIME/FRB exhibiting shorter pulse width and narrower bandwidth compared to the CHIME/Slow detection. Here we report properties of the bursts, discuss the sensitivity and completeness of the current version of the CHIME/Slow pipeline, and outline future development to improve its performance. Finally, based on these results, we report the all-sky rate (95% credible region) of radio transients with pulse widths between 16 ms to 5 s, fluence above 5 Jy ms and observing frequency of 600 MHz to be between 184 and 4556 bursts sky$^{-1}$ day$^{-1}$.

astro-ph.IM↗

arXiv2024

Integrated lithium niobate photonic computing circuit based on efficient and high-speed electro-optic conversion

Here we show a photonic computing accelerator utilizing a system-level thin-film lithium niobate circuit which overcomes this limitation. Leveraging the strong electro-optic (Pockels) effect and the scalability of this platform, we demonstrate photonic computation at speeds up to 1.36 TOPS while consuming 0.057 pJ/OP. Our system features more than 100 thin-film lithium niobate high-performance components working synergistically, surpassing state-of-the-art systems on this platform. We further demonstrate binary-classification, handwritten-digit classification, and image classification with remarkable accuracy, showcasing our system's capability of executing real algorithms. Finally, we investigate the opportunities offered by combining our system with a hybrid-integrated distributed feedback laser source and a heterogeneous-integrated modified uni-traveling carrier photodiode. Our results illustrate the promise of thin-film lithium niobate as a computational platform, addressing current bottlenecks in both electronic and photonic computation. Its unique properties of high-performance electro-optic weight encoding and conversion, wafer-scale scalability, and compatibility with integrated lasers and detectors, position thin-film lithium niobate photonics as a valuable complement to silicon photonics, with extensions to applications in ultrafast and power-efficient signal processing and ranging.

physics.optics↗

arXiv2022

Integrated Electro-Optic Isolator on Thin Film Lithium Niobate

Optical isolator is an indispensable component of almost any optical system and is used to protect a laser from unwanted reflections for phase-stable coherent operation. The development of chip-scale optical systems, powered by semiconductor lasers integrated on the same chip, has resulted in a need for a fully integrated optical isolator. However, conventional approaches based on application of magneto-optic materials to break the reciprocity and provide required isolation have significant challenges in terms of material processing and insertion loss. As a result, many magnetic-free approaches have been explored, including acousto-optics, optical nonlinearity, and electro-optics. However, to date, the realization of an integrated isolator with low insertion loss, high isolation ratio, broad bandwidth, and low power consumption on a monolithic material platform is still absent. Here we realize non-reciprocal traveling-wave EO-based isolator on thin-film LN, enabling maximum optical isolation of 48 dB and an on-chip insertion loss of 0.5 dB using a single-frequency microwave drive at 21-dBm RF power. The isolation ratio is verified to be larger than 37 dB across a tunable optical wavelength range from 1510 to 1630 nm. We verify that our hybrid DFB laser - LN isolator module successfully protects the single-mode operation and the linewidth of the DFB laser from reflection. Our result is a significant step towards a practical high-performance optical isolator on chip.

physics.optics↗

arXiv2020

Breaking voltage-bandwidth limits in integrated lithium niobate modulators using micro-structured electrodes

Electro-optic modulators with low voltage and large bandwidth are crucial for both analog and digital communications. Recently, thin-film lithium niobate modulators have enable dramatic performance improvements by reducing the required modulation voltage while maintaining high bandwidths. However, the reduced electrode gaps in such modulators leads to significantly higher microwave losses, which limit electro-optic performance at high frequencies. Here we overcome this limitation and achieve a record combination of low RF half-wave voltage of 1.3 V while maintaining electro-optic response with 1.8-dB roll-off at 50 GHz. This demonstration represents a significant improvement in voltage-bandwidth limit, one that is comparable to that achieved when switching from legacy bulk to thin-film lithium niobate modulators. Leveraging the low-loss electrode geometry, we show that sub-volt modulators with $>$ 100 GHz bandwidth can be enabled.

physics.app-ph↗

arXiv2020

Wafer-scale low-loss lithium niobate photonic integrated circuits

Thin-film lithium niobate (LN) photonic integrated circuits (PICs) could enable ultrahigh performance in electro-optic and nonlinear optical devices. To date, realizations have been limited to chip-scale proof-of-concepts. Here we demonstrate monolithic LN PICs fabricated on 4- and 6-inch wafers with deep ultraviolet lithography and show smooth and uniform etching, achieving 0.27 dB/cm optical propagation loss on wafer-scale. Our results show that LN PICs are fundamentally scalable and can be highly cost-effective.

physics.app-ph↗

arXiv2017

Counter-rotating cavity solitons in a silicon nitride microresonator

We demonstrate the generation of counter-rotating cavity solitons in a silicon nitride microresonator using a fixed, single-frequency laser. We demonstrate a dual 3-soliton state with a difference in the repetition rates of the soliton trains that can be tuned by varying the ratio of pump powers in the two directions. Such a system enables a highly compact, tunable dual comb source that can be used for applications such as spectroscopy and distance ranging.

physics.optics↗

arXiv2016

On-chip dual comb source for spectroscopy

Dual-comb spectroscopy is a powerful technique for real-time, broadband optical sampling of molecular spectra which requires no moving components. Recent developments with microresonator-based platforms have enabled frequency combs at the chip scale. However, the need to precisely match the resonance wavelengths of distinct high-quality-factor microcavities has hindered the development of an on-chip dual comb source. Here, we report the first simultaneous generation of two microresonator combs on the same chip from a single laser. The combs span a broad bandwidth of 51 THz around a wavelength of 1.56 $\mu$m. We demonstrate low-noise operation of both frequency combs by deterministically tuning into soliton mode-locked states using integrated microheaters, resulting in narrow ($<$ 10 kHz) microwave beatnotes. We further use one mode-locked comb as a reference to probe the formation dynamics of the other comb, thus introducing a technique to investigate comb evolution without auxiliary lasers or microwave oscillators. We demonstrate broadband high-SNR absorption spectroscopy of dichloromethane spanning 170 nm using the dual comb source over a 20 $\mu$s acquisition time. Our device paves the way for compact and robust dual-comb spectrometers at nanosecond timescales.

physics.optics↗

arXiv2016

Dynamics of mode-coupling-induced microresonator frequency combs in normal dispersion

We experimentally and theoretically investigate the dynamics of microresonator-based frequency comb generation assisted by mode coupling in the normal group-velocity dispersion (GVD) regime. We show that mode coupling can initiate intracavity modulation instability (MI) by directly perturbing the pump-resonance mode. We also observe the formation of a low-noise comb as the pump frequency is tuned further into resonance from the MI point. We determine the phase-matching conditions that accurately predict all the essential features of the MI and comb spectra, and extend the existing analogy between mode coupling and high-order dispersion to the normal GVD regime. We discuss the applicability of our analysis to the possibility of broadband comb generation in the normal GVD regime.

physics.optics↗

arXiv2016

Breather soliton dynamics in microresonators

The generation of temporal cavity solitons in microresonators results in low-noise optical frequency combs which are critical for applications in spectroscopy, astronomy, navigation or telecommunications. Breather solitons also form an important part of many different classes of nonlinear wave systems with a localized temporal structure that exhibits oscillatory behavior. To date, the dynamics of breather solitons in microresonators remains largely unexplored, and its experimental characterization is challenging. Here, we demonstrate the excitation of breather solitons in two different microresonator platforms based on silicon nitride and on silicon. We investigate the dependence of the breathing frequency on pump detuning and observe the transition from period-1 to period-2 oscillation in good agreement with the numerical simulations. Our study presents experimental confirmation of the stability diagram of dissipative cavity solitons predicted by the Lugiato-Lefever equation and is importance to understanding the fundamental dynamical properties of solitons within the larger context of nonlinear science.

physics.optics↗

arXiv2016

Thermally Controlled Comb Generation and Soliton Modelocking in Microresonators

We report the first demonstration of thermally controlled soliton modelocked frequency comb generation in microresonators. By controlling the electric current through heaters integrated with silicon nitride microresonators, we demonstrate a systematic and repeatable pathway to single- and multi-soliton modelocked states without adjusting the pump laser wavelength. Such an approach could greatly simplify the generation of modelocked frequency combs and facilitate applications such as chip-based dual-comb spectroscopy.

physics.optics↗

arXiv2015

Dual-pumped degenerate Kerr oscillator in a silicon nitride microresonator

We demonstrate a degenerate parametric oscillator in a silicon-nitride microresonator. We use two frequency-detuned pump waves to perform parametric four-wave mixing and operate in the normal group-velocity dispersion regime to produce signal and idler fields that are frequency degenerate. Our theoretical modeling shows that this regime enables generation of bimodal phase states, analogous to the \c{hi}(2)-based degenerate OPO. Our system offers potential for realization of CMOS-chip-based coherent optical computing and an all-optical quantum random number generator.

physics.optics↗

arXiv2015

Silicon-Nitride Platform for Narrowband Entangled Photon Generation

CMOS-compatible photonic chips are highly desirable for real-world quantum optics devices due to their scalability, robustness, and integration with electronics. Despite impressive advances using Silicon nanostructures, challenges remain in reducing their linear and nonlinear losses and in creating narrowband photons necessary for interfacing with quantum memories. Here we demonstrate the potential of the silicon nitride (Si3N4) platform by realizing an ultracompact, bright, entangled photon-pair source with selectable photon bandwidths down to 30 MHz, which is unprecedented for an integrated source. Leveraging Si3N4's moderate thermal expansion, simple temperature control of the chip enables precise wavelength stabilization and tunability without active control. Single-mode photon pairs at 1550 nm are generated at rates exceeding 107 s-1 with mW's of pump power and are used to produce time-bin entanglement. Moreover, Si3N4 allows for operation from the visible to the mid-IR, which make it highly promising for a wide range of integrated quantum photonics applications.

quant-ph↗

arXiv2015

Tunable Squeezing Using Coupled Ring Resonators on a Silicon Nitride Chip

We demonstrate continuous tuning of the squeezing level generated in a double-ring optical parametric oscillator by externally controlling the coupling condition using electrically controlled integrated microheaters. We accomplish this by utilizing the avoided crossing exhibited by a pair of coupled silicon nitride microring resonators. We directly detect a change in the squeezing level from 0.5 dB in the undercoupled regime to 2 dB in the overcoupled regime, which corresponds to a change in the generated on-chip squeezing factor from 0.9 dB to 3.9 dB. Such wide tunability in the squeezing level can be harnessed for on-chip quantum enhanced sensing protocols which require an optimal degree of squeezing.

quant-ph↗

arXiv2015

Tunable frequency combs based on dual microring resonators

In order to achieve efficient parametric frequency comb generation in microresonators, external control of coupling between the cavity and the bus waveguide is necessary. However, for passive monolithically integrated structures, the coupling gap is fixed and cannot be externally controlled, making tuning the coupling inherently challenging. We design a dual-cavity coupled microresonator structure in which tuning one ring resonance frequency induces a change in the overall cavity coupling condition. We demonstrate wide extinction tunability with high efficiency by engineering the ring coupling conditions. Additionally, we note a distinct dispersion tunability resulting from coupling two cavities of slightly different path lengths, and present a new method of modal dispersion engineering. Our fabricated devices consist of two coupled high quality factor silicon nitride microresonators, where the extinction ratio of the resonances can be controlled using integrated microheaters. Using this extinction tunability, we optimize comb generation efficiency as well as provide tunability for avoiding higher-order mode-crossings, known for degrading comb generation. The device is able to provide a 110-fold improvement in the comb generation efficiency. Finally, we demonstrate open eye diagrams using low-noise phase-locked comb lines as a wavelength-division multiplexing channel.

physics.optics↗

arXiv2013

On-Chip Optical Squeezing

We present the first demonstration of all-optical squeezing in an on-chip monolithically integrated CMOS-compatible platform. Our device consists of a low loss silicon nitride microring optical parametric oscillator (OPO) with a gigahertz cavity linewidth. We measure 1.7 dB (5 dB corrected for losses) of sub-shot noise quantum correlations between bright twin beams generated in the microring four-wave-mixing OPO pumped above threshold. This experiment demonstrates a compact, robust, and scalable platform for quantum optics and quantum information experiments on-chip.

physics.optics↗

arXiv2013

Overcoming Si3N4 film stress limitations for High Quality factor ring resonators

Silicon nitride (Si3N4) ring resonators are critical for a variety of photonic devices. However the intrinsically high film stress of silicon nitride has limited both the optical confinement and quality factor (Q) of ring resonators. We show that stress in Si3N4 films can be overcome by introducing mechanical trenches for isolating photonic devices from propagating cracks. We demonstrate a Si3N4 ring resonator with an intrinsic quality factor of 7 million, corresponding to a propagation loss of 4.2 dB/m. This is the highest quality factor reported to date for high confinement Si3N4 ring resonators in the 1550 nm wavelength range.

physics.optics↗