arXiv subjects

Li Zhang

Publications and source records attributed to Li Zhang.

At least 739 records · Page 41Linked to original sources

arXiv2020

Strong and tunable spin-orbit interaction in a single crystalline InSb nanosheet

A dual-gate InSb nanosheet field-effect device is realized and is used to investigate the physical origin and the controllability of the spin-orbit interaction in a narrow bandgap semiconductor InSb nanosheet. We demonstrate that by applying a voltage over the dual gate, efficiently tuning of the spin-orbit interaction in the InSb nanosheet can be achieved. We also find the presence of an intrinsic spin-orbit interaction in the InSb nanosheet at zero dual-gate voltage and identify its physical origin as a build-in asymmetry in the device layer structure. Having a strong and controllable spin-orbit interaction in an InSb nanosheet could simplify the design and realization of spintronic deceives, spin-based quantum devices and topological quantum devices.

cond-mat.mes-hall↗

arXiv2020

Skin disease diagnosis with deep learning: a review

Skin cancer is one of the most threatening diseases worldwide. However, diagnosing skin cancer correctly is challenging. Recently, deep learning algorithms have emerged to achieve excellent performance on various tasks. Particularly, they have been applied to the skin disease diagnosis tasks. In this paper, we present a review on deep learning methods and their applications in skin disease diagnosis. We first present a brief introduction to skin diseases and image acquisition methods in dermatology, and list several publicly available skin datasets for training and testing algorithms. Then, we introduce the conception of deep learning and review popular deep learning architectures. Thereafter, popular deep learning frameworks facilitating the implementation of deep learning algorithms and performance evaluation metrics are presented. As an important part of this article, we then review the literature involving deep learning methods for skin disease diagnosis from several aspects according to the specific tasks. Additionally, we discuss the challenges faced in the area and suggest possible future research directions. The major purpose of this article is to provide a conceptual and systematically review of the recent works on skin disease diagnosis with deep learning. Given the popularity of deep learning, there remains great challenges in the area, as well as opportunities that we can explore in the future.

eess.IV↗

arXiv2020

A Novel 3D Non-Stationary Multi-Frequency Multi-Link Wideband MIMO Channel Model

In this paper, a multi-frequency multi-link three-dimensional (3D) non-stationary wideband multiple-input multiple-output (MIMO) channel model is proposed. The spatial consistency and multi-frequency correlation are considered in parameters initialization of every single-link and different frequencies, including large scale parameters (LSPs) and small scale parameters (SSPs). Moreover, SSPs are time-variant and updated when scatterers and the receiver (Rx) are moving. The temporal evolution of clusters is modeled by birth and death processes. The single-link channel model which has considered the inter-correlation can be easily extended to multi-link channel model. Statistical properties, including spatial cross-correlation function (CCF), power delay profile (PDP), and correlation matrix collinearity (CMC) are investigated and compared with the 3rd generation partner project (3GPP) TR 38.901 and quasi deterministic radio channel generator (QuaDRiGa) channel models. Besides, the CCF is validated against measurement data.

cs.IT↗

arXiv2020

A gamma-ray periodic modulation in Globular Cluster 47 Tucanae

The Globular Cluster 47 Tucanae was firstly detected in gamma-rays by the Large Area Telescope (LAT) onboard the \emph{Fermi} Gamma-ray Space Telescope, and the gamma-ray emission has been widely attributed to the millisecond pulsars. In this work, we analyze the Fermi-LAT pass 8 data ranging from 2008 August to 2017 May and report the detection of a modulation with a period of $18.416\pm0.008$ hours at a significance level of $\sim 4.8σ$. This is the first time to detect a significant modulation with a period much longer than that of millisecond pulsars in gamma-rays from Globular Clusters. The periodic modulation signal appears in the {\it Swift}-BAT data as well. The phase-folded Chandra X-ray light curve of a point source may have provided an additional clue.

astro-ph.HE↗

arXiv2020

A Systematic Literature Review on Federated Learning: From A Model Quality Perspective

As an emerging technique, Federated Learning (FL) can jointly train a global model with the data remaining locally, which effectively solves the problem of data privacy protection through the encryption mechanism. The clients train their local model, and the server aggregates models until convergence. In this process, the server uses an incentive mechanism to encourage clients to contribute high-quality and large-volume data to improve the global model. Although some works have applied FL to the Internet of Things (IoT), medicine, manufacturing, etc., the application of FL is still in its infancy, and many related issues need to be solved. Improving the quality of FL models is one of the current research hotspots and challenging tasks. This paper systematically reviews and objectively analyzes the approaches to improving the quality of FL models. We are also interested in the research and application trends of FL and the effect comparison between FL and non-FL because the practitioners usually worry that achieving privacy protection needs compromising learning quality. We use a systematic review method to analyze 147 latest articles related to FL. This review provides useful information and insights to both academia and practitioners from the industry. We investigate research questions about academic research and industrial application trends of FL, essential factors affecting the quality of FL models, and compare FL and non-FL algorithms in terms of learning quality. Based on our review's conclusion, we give some suggestions for improving the FL model quality. Finally, we propose an FL application framework for practitioners.

cs.LG↗

arXiv2020

Gaussian Process Modeling $\it{Fermi}$-LAT $γ$-ray Blazar Variability: A Sample of Blazars with $γ$-ray Quasi-periodicities

Blazar variability may be driven by stochastic processes. On the other hand, quasi-periodic oscillation (QPO) behaviors are recently reported to be detected in $\it{Fermi}$-LAT data of blazars. However, the significances of these QPO signals given by traditional Fourier-like methods are still questioned. We analyze $γ$-ray light curves of the QPO blazars with two Gaussian process methods, CARMA and $\it{celerite}$, to examine the appropriateness of Gaussian processes for characterizing $γ$-ray light curves of blazars and the existence of the reported QPOs. We collect a sample of 27 blazars with possible $γ$-ray periodicity and generate their $\sim11$ years $\it{Fermi}$-LAT light curves. We apply the Gaussian process models to the $γ$-ray light curves, and build their intrinsic power spectral densities (PSDs). The results show that in general the $γ$-ray light curves can be characterized by CARMA and $\textit{celerite}$ models, indicating that $γ$-ray variabilities of blazars are essentially Gaussian processes. The resulting PSDs are generally the red noise shapes with slopes between $-0.6$ and $-1.7$. Possible evidence for the $γ$-ray QPOs in PKS 0537$-$441 and PG 1553$+$113 are found in the Gaussian process modelings.

astro-ph.HE↗

arXiv2020

Direct Classification of Emotional Intensity

In this paper, we present a model that can directly predict emotion intensity score from video inputs, instead of deriving from action units. Using a 3d DNN incorporated with dynamic emotion information, we train a model using videos of different people smiling that outputs an intensity score from 0-10. Each video is labeled framewise using a normalized action-unit based intensity score. Our model then employs an adaptive learning technique to improve performance when dealing with new subjects. Compared to other models, our model excels in generalization between different people as well as provides a new framework to directly classify emotional intensity.

cs.CV↗

arXiv2020

A Low-Power Time-to-Digital Converter for the CMS Endcap Timing Layer (ETL) Upgrade

We present the design and test results of a Time-to-Digital-Converter (TDC). The TDC will be a part of the readout ASIC, called ETROC, to read out Low-Gain Avalanche Detectors (LGADs) for the CMS Endcap Timing Layer (ETL) of High-Luminosity LHC upgrade. One of the challenges of the ETROC design is that the TDC is required to consume less than 200 W for each pixel at the nominal hit occupancy of 1%. To meet the low-power requirement, we use a single delay line for both the Time of Arrival (TOA) and the Time over Threshold (TOT) measurements without delay control. A double-strobe self-calibration scheme is used to compensate for process variation, temperature, and power supply voltage. The TDC is fabricated in a 65 nm CMOS technology. The overall performances of the TDC have been evaluated. The TOA has a bin size of 17.8 ps within its effective dynamic range of 11.6 ns. The effective measurement precision of the TOA is 5.6 ps and 9.9 ps with and without the nonlinearity correction, respectively. The TDC block consumes 97 W at the hit occupancy of 1%. Over a temperature range from 23 C to 78 C and a power supply voltage range from 1.05 V to 1.35 V (the nominal value of 1.20 V), the self-calibrated bin size of the TOA varies within 0.4%. The measured TDC performances meet the requirements except that more tests will be performed in the future to verify that the TDC complies with the radiation-tolerance specifications.

physics.ins-det↗

arXiv2020

A 20 Gbps Data Transmitting ASIC with PAM4 for Particle Physics Experiments

We present the design principle and test results of a data transmitting ASIC, GBS20, for particle physics experiments. The goal of GBS20 will be an ASIC that employs two serializers each from the 10.24 Gbps lpGBT SerDes, sharing the PLL also from lpGBT. A PAM4 encoder plus a VCSEL driver will be implemented in the same die to use the same clock system, eliminating the need of CDRs in the PAM4 encoder. This way the transmitter module, GBT20, developed using the GBS20 ASIC, will have the exact lpGBT data interface and transmission protocol, with an output up to 20.48 Gbps over one fiber. With PAM4 embedded FPGAs at the receiving end, GBT20 will halve the fibers needed in a system and better use the input bandwidth of the FPGA. A prototype, GBS20v0 is fabricated using a commercial 65 nm CMOS technology. This prototype has two serializers and a PAM4 encoder sharing the lpGBT PLL, but no user data input. An internal PRBS generator provides data to the serializers. GBS20v0 is tested barely up to 20.48 Gbps. With lessons learned from this prototype, we are designing the second prototype, GBS20v1, that will have 16 user data input channels each at 1.28 Gbps. We present the design concept of the GBS20 ASIC and the GBT20 module, the preliminary test results, and lessons learned from GBS20v0 and the design of GBS20v1 which will be not only a test chip but also a user chip with 16 input data channels.

physics.ins-det↗

arXiv2020

A 10 Gbps Driver/Receiver ASIC and Optical Modules for Particle Physics Experiments

We present the design and test results of a Drivers and Limiting AmplifierS ASIC operating at 10 Gbps (DLAS10) and three Miniature Optical Transmitter/Receiver/Transceiver modules (MTx+, MRx+, and MTRx+) based on DLAS10. DLAS10 can drive two Transmitter Optical Sub-Assemblies (TOSAs) of Vertical Cavity Surface Emitting Lasers (VCSELs), receive the signals from two Receiver Optical Sub-Assemblies (ROSAs) that have no embedded limiting amplifiers, or drive a VCSEL TOSA and receive the signal from a ROSA, respectively. Each channel of DLAS10 consists of an input Continuous Time Linear Equalizer (CTLE), a four-stage limiting amplifier (LA), and an output driver. The LA amplifies the signals of variable levels to a stable swing. The output driver drives VCSELs or impedance-controlled traces. DLAS10 is fabricated in a 65 nm CMOS technology. The die is 1 mm x 1 mm. DLAS10 is packaged in a 4 mm x 4 mm 24-pin quad-flat no-leads (QFN) package. DLAS10 has been tested in MTx+, MRx+, and MTRx+ modules. Both measured optical and electrical eye diagrams pass the 10 Gbps eye mask test. The input electrical sensitivity is 40 mVp-p, while the input optical sensitivity is -12 dBm. The total jitter of MRx+ is 29 ps (P-P) with a random jitter of 1.6 ps (RMS) and a deterministic jitter of 9.9 ps. Each MTx+/MTRx+ module consumes 82 mW/ch and 174 mW/ch, respectively.

physics.ins-det↗

arXiv2020

Depth Guided Adaptive Meta-Fusion Network for Few-shot Video Recognition

Humans can easily recognize actions with only a few examples given, while the existing video recognition models still heavily rely on the large-scale labeled data inputs. This observation has motivated an increasing interest in few-shot video action recognition, which aims at learning new actions with only very few labeled samples. In this paper, we propose a depth guided Adaptive Meta-Fusion Network for few-shot video recognition which is termed as AMeFu-Net. Concretely, we tackle the few-shot recognition problem from three aspects: firstly, we alleviate this extremely data-scarce problem by introducing depth information as a carrier of the scene, which will bring extra visual information to our model; secondly, we fuse the representation of original RGB clips with multiple non-strictly corresponding depth clips sampled by our temporal asynchronization augmentation mechanism, which synthesizes new instances at feature-level; thirdly, a novel Depth Guided Adaptive Instance Normalization (DGAdaIN) fusion module is proposed to fuse the two-stream modalities efficiently. Additionally, to better mimic the few-shot recognition process, our model is trained in the meta-learning way. Extensive experiments on several action recognition benchmarks demonstrate the effectiveness of our model.

cs.CV↗

arXiv2020

LID 2020: The Learning from Imperfect Data Challenge Results

Learning from imperfect data becomes an issue in many industrial applications after the research community has made profound progress in supervised learning from perfectly annotated datasets. The purpose of the Learning from Imperfect Data (LID) workshop is to inspire and facilitate the research in developing novel approaches that would harness the imperfect data and improve the data-efficiency during training. A massive amount of user-generated data nowadays available on multiple internet services. How to leverage those and improve the machine learning models is a high impact problem. We organize the challenges in conjunction with the workshop. The goal of these challenges is to find the state-of-the-art approaches in the weakly supervised learning setting for object detection, semantic segmentation, and scene parsing. There are three tracks in the challenge, i.e., weakly supervised semantic segmentation (Track 1), weakly supervised scene parsing (Track 2), and weakly supervised object localization (Track 3). In Track 1, based on ILSVRC DET, we provide pixel-level annotations of 15K images from 200 categories for evaluation. In Track 2, we provide point-based annotations for the training set of ADE20K. In Track 3, based on ILSVRC CLS-LOC, we provide pixel-level annotations of 44,271 images for evaluation. Besides, we further introduce a new evaluation metric proposed by \cite{zhang2020rethinking}, i.e., IoU curve, to measure the quality of the generated object localization maps. This technical report summarizes the highlights from the challenge. The challenge submission server and the leaderboard will continue to open for the researchers who are interested in it. More details regarding the challenge and the benchmarks are available at https://lidchallenge.github.io

cs.CV↗

arXiv2020

Towards Optimal Filter Pruning with Balanced Performance and Pruning Speed

Filter pruning has drawn more attention since resource constrained platform requires more compact model for deployment. However, current pruning methods suffer either from the inferior performance of one-shot methods, or the expensive time cost of iterative training methods. In this paper, we propose a balanced filter pruning method for both performance and pruning speed. Based on the filter importance criteria, our method is able to prune a layer with approximate layer-wise optimal pruning rate at preset loss variation. The network is pruned in the layer-wise way without the time consuming prune-retrain iteration. If a pre-defined pruning rate for the entire network is given, we also introduce a method to find the corresponding loss variation threshold with fast converging speed. Moreover, we propose the layer group pruning and channel selection mechanism for channel alignment in network with short connections. The proposed pruning method is widely applicable to common architectures and does not involve any additional training except the final fine-tuning. Comprehensive experiments show that our method outperforms many state-of-the-art approaches.

cs.CV↗

arXiv2020

Observation of nonreciprocal magneto-optical scattering in nonencapsulated few-layered CrI3

Magneto-optical effect refers to a rotation of polarization plane, which has been widely studied in traditional ferromagnetic metal and insulator films and scarcely in two-dimensional layered materials. Here we uncover a new nonreciprocal magneto-inelastic light scattering effect in ferromagnetic few-layer CrI3. We observed a rotation of the polarization plane of inelastic light scattering between -20o and +60o that are tunable by an out-of-plane magnetic field from -2.5 to 2.5 T. It is experimentally observed that the degree of polarization can be magnetically manipulated between -20% and 85%. This work raises a new magneto-optical phenomenon and could create opportunities of applying 2D ferromagnetic materials in Raman lasing, topological photonics, and magneto-optical modulator for information transport and storage.

cond-mat.mtrl-sci↗

arXiv2020

Long-Term Cloth-Changing Person Re-identification

Person re-identification (Re-ID) aims to match a target person across camera views at different locations and times. Existing Re-ID studies focus on the short-term cloth-consistent setting, under which a person re-appears in different camera views with the same outfit. A discriminative feature representation learned by existing deep Re-ID models is thus dominated by the visual appearance of clothing. In this work, we focus on a much more difficult yet practical setting where person matching is conducted over long-duration, e.g., over days and months and therefore inevitably under the new challenge of changing clothes. This problem, termed Long-Term Cloth-Changing (LTCC) Re-ID is much understudied due to the lack of large scale datasets. The first contribution of this work is a new LTCC dataset containing people captured over a long period of time with frequent clothing changes. As a second contribution, we propose a novel Re-ID method specifically designed to address the cloth-changing challenge. Specifically, we consider that under cloth-changes, soft-biometrics such as body shape would be more reliable. We, therefore, introduce a shape embedding module as well as a cloth-elimination shape-distillation module aiming to eliminate the now unreliable clothing appearance features and focus on the body shape information. Extensive experiments show that superior performance is achieved by the proposed model on the new LTCC dataset. The code and dataset will be available at https://naiq.github.io/LTCC_Perosn_ReID.html.

cs.CV↗

arXiv2020

Photonic topological valley-locked waveguides

Topological valley kink states have become a significant research frontier with considerable intriguing applications such as robust on-chip communications and topological lasers. Unlike guided modes with adjustable widths in most conventional waveguides, the valley kink states are usually highly confined around the domain walls and thus lack the mode width degree of freedom (DOF), posing a serious limitation to potential device applications. Here, by adding a photonic crystal (PhC) featuring a Dirac point between two valley PhCs with opposite valley-Chern numbers, we design and experimentally demonstrate topological valley-locked waveguides (TVLWs) with tunable mode widths. The photoinc TVLWs could find unique applications, such as high-energy-capacity topological channel intersections, valley-locked energy concentrators, and topological cavities with designable confinement, as verified numerically and experimentally. The TVLWs with width DOF could be beneficial to interface with the exsisting photonic waveguides and devices, and serve as a novel platform for practical use of topological lasing, field enhancement, on-chip communicaitons, and high-capacity energy transport.

physics.app-ph↗

arXiv2020

Large-scale Gastric Cancer Screening and Localization Using Multi-task Deep Neural Network

Gastric cancer is one of the most common cancers, which ranks third among the leading causes of cancer death. Biopsy of gastric mucosa is a standard procedure in gastric cancer screening test. However, manual pathological inspection is labor-intensive and time-consuming. Besides, it is challenging for an automated algorithm to locate the small lesion regions in the gigapixel whole-slide image and make the decision correctly.To tackle these issues, we collected large-scale whole-slide image dataset with detailed lesion region annotation and designed a whole-slide image analyzing framework consisting of 3 networks which could not only determine the screening result but also present the suspicious areas to the pathologist for reference. Experiments demonstrated that our proposed framework achieves sensitivity of 97.05% and specificity of 92.72% in screening task and Dice coefficient of 0.8331 in segmentation task. Furthermore, we tested our best model in real-world scenario on 10,315 whole-slide images collected from 4 medical centers.

eess.IV↗

arXiv2020

Mobility edge of Stark many-body localization

We investigate many-body localization of interacting spinless fermions in a one-dimensional disordered and tilted lattice. The fermions undergo energy-dependent transitions from ergodic to Stark many-body localization driven by the tilted potential, which are manifested by the appearance of mobility edges between delocalized states and Stark many-body localized states even when the disorder is weak. We can concretely diagnose these transitions rather than crossovers by finite-size scaling of energy-level statistics. Moreover, in the Stark many-body localization, the entanglement entropy obeys the area law scaling, in analogy to that in the conventional many-body localization.

quant-ph↗