arXiv subjects

Lin Zhao

Publications and source records attributed to Lin Zhao.

At least 289 records · Page 16Linked to original sources

arXiv2017

A Unified Stochastic Hybrid System Approach to Aggregate Modeling of Responsive Loads

Aggregate load modeling is of fundamental importance for systematic analysis and design of various demand response strategies. Instead of keeping track of the trajectories of individual loads, the aggregate modeling problem focuses on characterizing the density evolution of the load population. Most existing models are only applicable to Thermostatically Controlled Loads (TCL) with first-order linear dynamics. This paper develops a unified aggregate modeling approach that can be used for general TCLs as well as deferrable loads. We propose a deterministic hybrid system model to describe individual load dynamics under demand response rules, and develop a general stochastic hybrid system (SHS) model to capture the population dynamics. We also derive a set of partial differential equations (PDE) that governs the probability density evolution of the SHS. Our results cannot be obtained using the exiting SHS tools in the literature as the proposed SHS model involves both random and deterministic switchings with general switching surfaces in multi-dimensional domains. The derived PDE model includes many existing aggregate load modeling results as special cases and can be used in many other realistic modeling scenarios that have not been studied in the literature.

eess.SY↗

arXiv2017

Electronic structure of heavy fermion system CePt2In7 from angle-resolved photoemission spectroscopy

We have carried out high-resolution angle-resolved photoemission measurements on the Cebased heavy fermion compound CePt2In7 that exhibits stronger two-dimensional character than the prototypical heavy fermion system CeCoIn5. Multiple Fermi surface sheets and a complex band structure are clearly resolved. We have also performed detailed band structure calculations on CePt2In7. The good agreement found between our measurements and the calculations suggests that the band renormalization effect is rather weak in CePt2In7. A comparison of the common features of the electronic structure of CePt2In7 and CeCoIn5 indicates that CeCoIn5 shows a much stronger band renormalization effect than CePt2In7. These results provide new information for understanding the heavy fermion behaviors and unconventional superconductivity in Ce-based heavy fermion systems.

cond-mat.str-el↗

arXiv2017

Electronic structure and nematic phase transition in superconducting multi-layer FeSe films grown by pulsed laser deposition method

We report comprehensive angle-resolved photoemission investigations on the electronic structure of single crystal multiple-layer FeSe films grown on CaF2 substrate by pulsed laser deposition (PLD) method. Measurements on FeSe/CaF2 samples with different superconducting transition temperatures Tc of 4 K, 9 K and 14 K reveal electronic difference in their Fermi surface and band structure. Indication of the nematic phase transition is observed from temperature-dependent measurements of these samples; the nematic transition temperature is 140-160 K, much higher than 90 K for the bulk FeSe. Potassium deposition is applied onto the surface of these samples; the nematic phase is suppressed by potassium deposition which introduces electrons to these FeSe films and causes a pronounced electronic structure change. We compared and discussed the electronic structure and superconductivity of the FeSe/CaF2 films by PLD method with the FeSe/SrTiO3 films by molecular beam epitaxy (MBE) method and bulk FeSe. The PLD-grown multilayer FeSe/CaF2 is more hole-doped than that in MBE-grown multiple-layer FeSe films. Our results on FeSe/CaF2 films by PLD method establish a link between bulk FeSe single crystal and FeSe/SrTiO3 films by MBE method, and provide important information to understand superconductivity in FeSe-related systems.

cond-mat.supr-con↗

arXiv2017

Stability Analysis of Multi-Period Electricity Market with Heterogeneous Dynamic Assets

Market-based coordination of demand side assets has gained great interests in recent years. In spite of its efficiency, there is a risk that the interaction between the dynamic assets through the price signal could result in an unstable closed-loop system. This may cause oscillating power consumption profiles and high volatile energy price. This paper proposes an electricity market model which explicitly considers the heterogeneous dynamic asset models. We show that the market dynamics can be modeled by a discrete nonlinear system, and then derive analytical conditions to guarantee the stability of the market via contraction analysis. These conditions imply that the market stability can be guaranteed by choosing bidding functions with relatively shallower slopes in the linear region. Finally, numerical examples are provided to demonstrate the application of the derived stability conditions.

math.OC↗

arXiv2017

A Geometric Approach to Aggregate Flexibility Modeling of Thermostatically Controlled Loads

Coordinated aggregation of a large population of thermostatically controlled loads (TCLs) presents a great potential to provide various ancillary services to the grid. One of the key challenges of integrating TCLs into system level operation and control is developing a simple and portable model to accurately capture their aggregate flexibility. In this paper, we propose a geometric approach to model the aggregate flexibility of TCLs. We show that the set of admissible power profiles of an individual TCL is a polytope, and their aggregate flexibility is the Minkowski sum of the individual polytopes. In order to represent their aggregate flexibility in an intuitive way and achieve a tractable approximation, we develop optimization-based algorithms to approximate the polytopes by the homothets of a given convex set. As a special application, this set is chosen as a \emph{virtual battery model} and the corresponding optimal approximations are solved efficiently by equivalent linear programming problems. Numerical results show that our algorithms yield significant improvement in characterizing the aggregate flexibility over existing modeling methods. We also conduct case studies to demonstrate the efficacy of our approaches by coordinating TCLs to track a frequency regulation signal from the Pennsylvania-New Jersey-Maryland (PJM) Interconnection.

math.OC↗

arXiv2017

Question Generation from a Knowledge Base with Web Exploration

Question generation from a knowledge base (KB) is the task of generating questions related to the domain of the input KB. We propose a system for generating fluent and natural questions from a KB, which significantly reduces the human effort by leveraging massive web resources. In more detail, a seed question set is first generated by applying a small number of hand-crafted templates on the input KB, then more questions are retrieved by iteratively forming already obtained questions as search queries into a standard search engine, before finally questions are selected by estimating their fluency and domain relevance. Evaluated by human graders on 500 random-selected triples from Freebase, questions generated by our system are judged to be more fluent than those of \newcite{serban-EtAl:2016:P16-1} by human graders.

cs.CL↗

arXiv2016

A unified integral equation scheme for doubly-periodic Laplace and Stokes boundary value problems in two dimensions

We present a spectrally-accurate scheme to turn a boundary integral formulation for an elliptic PDE on a single unit cell geometry into one for the fully periodic problem. Applications include computing the effective permeability of composite media (homogenization), and microfluidic chip design. Our basic idea is to exploit a small least squares solve to apply periodicity without ever handling periodic Green's functions. We exhibit fast solvers for the two-dimensional (2D) doubly-periodic Neumann Laplace problem (flow around insulators), and Stokes non-slip fluid flow problem, that for inclusions with smooth boundaries achieve 12-digit accuracy, and can handle thousands of inclusions per unit cell. We split the infinite sum over the lattice of images into a directly-summed "near" part plus a small number of auxiliary sources which represent the (smooth) remaining "far" contribution. Applying physical boundary conditions on the unit cell walls gives an expanded linear system, which, after a rank-1 or rank-3 correction and a Schur complement, leaves a well-conditioned square system which can be solved iteratively using fast multipole acceleration plus a low-rank term. We are rather explicit about the consistency and nullspaces of both the continuous and discretized problems. The scheme is simple (no lattice sums, Ewald methods, nor particle meshes are required), allows adaptivity, and is essentially dimension- and PDE-independent, so would generalize without fuss to 3D and to other non-oscillatory elliptic problems such as elastostatics. We incorporate recently developed spectral quadratures that accurately handle close-to-touching geometries. We include many numerical examples, and provide a software implementation.

math.NA↗

arXiv2016

Decreased aneurysmal subarachnoid hemorrhage incidence rate in elderly population than in middle aged population: a retrospective analysis of 8,144 cases in Mainland China

Purpose: Rupture of an intracranial aneurysm is the most common cause of subarachnoid haemorrhage (SAH), which is a life-threatening acute cerebrovascular event that typically affects working-age people. This study aims to investigate the aneurysmal SAH incidence rate in elderly population than in middle aged population in China. Materials and methods: Aneurysmal SAH cases were collected retrospectively from the archives of 21 hospitals in Mainland China. All the cases collected were from September 2016 and backward consecutively for a period of time up to 8 years. SAH was initially diagnosed by brain computed tomography, and CT angiography (CTA) or digital subtraction angiography (DSA) was followed and SAH was confirmed to be due to cerebral aneurysm. When for cases multiple bleeding occurred, the age of the first SAH was used in this study. The toltal incidence from all hospital at each age were summed together for females and males; then adjusted by the total population number at each age for females and males. The total population data was from the 2010 population census of the People's Republic of China. Results: In total there were 8,144 cases, with 4,861 females and 3,283 males. Our analysis shows for both females and males the relative aneurysmal SAH rate started to decrease after around 65 years old. The males the relative aneurysmal SAH rate might have started to decrease after around 55 years old. Conclusion: In contrast to previous reports, our data demonstrated a decreased aneurysmal subarachnoid hemorrhage incidence rate in elderly population than in middle aged population. Our data therefore support the hypothesis that aneurysms do not grow progressively once they form but probably either rupture or stabilize and that very elderly patients are at a reduced risk of rupture compared with atients who are younger with the same-sized aneurysms.

q-bio.TO↗

arXiv2016

On Social Optima of Non-Cooperative Mean Field Games

This paper studies the connections between mean-field games and the social welfare optimization problems. We consider a mean field game in functional spaces with a large population of agents, each of which seeks to minimize an individual cost function. The cost functions of different agents are coupled through a mean field term that depends on the mean of the population states. We show that under some mild conditions any $ε$-Nash equilibrium of the mean field game coincides with the optimal solution to a convex social welfare optimization problem. The results are proved based on a general formulation in the functional spaces and can be applied to a variety of mean field games studied in the literature. Our result also implies that the computation of the mean field equilibrium can be cast as a convex optimization problem, which can be efficiently solved by a decentralized primal dual algorithm. Numerical simulations are presented to demonstrate the effectiveness of the proposed approach.

math.OC↗

arXiv2016

Extracting Flexibility of Heterogeneous Deferrable Loads via Polytopic Projection Approximation

Aggregation of a large number of responsive loads presents great power flexibility for demand response. An effective control and coordination scheme of flexible loads requires an accurate and tractable model that captures their aggregate flexibility. This paper proposes a novel approach to extract the aggregate flexibility of deferrable loads with heterogeneous parameters using polytopic projection approximation. First, an exact characterization of their aggregate flexibility is derived analytically, which in general contains exponentially many inequality constraints with respect to the number of loads. In order to have a tractable solution, we develop a numerical algorithm that gives a sufficient approximation of the exact aggregate flexibility. Geometrically, the flexibility of each individual load is a polytope, and their aggregation is the Minkowski sum of these polytopes. Our method originates from an alternative interpretation of the Minkowski sum as projection. The aggregate flexibility can be viewed as the projection of a high-dimensional polytope onto the subspace representing the aggregate power. We formulate a robust optimization problem to optimally approximate the polytopic projection with respect to the homothet of a given polytope. To enable efficient and parallel computation of the aggregate flexibility for a large number of loads, a muti-stage aggregation strategy is proposed. The scheduling policy for individual loads is also derived. Finally, an energy arbitrage problem is solved to demonstrate the effectiveness of the proposed method.

math.OC↗

arXiv2016

Electronic structure of the ingredient planes of cuprate superconductor Bi2Sr2CuO6+δ: a comparison study with Bi2Sr2CaCu2O8+δ

By means of low-temperature scanning tunneling microscopy, we report on the electronic structures of BiO and SrO planes of Bi2Sr2CuO6+δ (Bi-2201) superconductor prepared by argon-ion bombardment and annealing. Depending on post annealing conditions, the BiO planes exhibit either pseudogap (PG) with sharp coherence peaks and an anomalously large gap of 49 meV or van Hove singularity (VHS) near the Fermi level, while the SrO is always characteristic of a PG-like feature. This contrasts with Bi2Sr2CaCu2O8+δ (Bi-2212) superconductor where VHS occurs solely on the SrO plane. We disclose the interstitial oxygen dopants (δ in the formulas) as a primary cause for the occurrence of VHS, which are located dominantly around the BiO and SrO planes, respectively, in Bi-2201 and Bi-2212. This is supported by the contrasting structural buckling amplitude of BiO and SrO planes in the two superconductors. Our findings provide solid evidence for the irrelevance of PG to the superconductivity in the two superconductors, as well as insights into why Bi-2212 can achieve a higher superconducting transition temperature than Bi-2201, and by implication, the mechanism of cuprate superconductivity.

cond-mat.supr-con↗

arXiv2016

Spectroscopic Evidence of Type II Weyl Semimetal State in WTe2

Quantum topological materials, exemplified by topological insulators, three-dimensional Dirac semimetals and Weyl semimetals, have attracted much attention recently because of their unique electronic structure and physical properties. Very lately it is proposed that the three-dimensional Weyl semimetals can be further classified into two types. In the type I Weyl semimetals, a topologically protected linear crossing of two bands, i.e., a Weyl point, occurs at the Fermi level resulting in a point-like Fermi surface. In the type II Weyl semimetals, the Weyl point emerges from a contact of an electron and a hole pocket at the boundary resulting in a highly tilted Weyl cone. In type II Weyl semimetals, the Lorentz invariance is violated and a fundamentally new kind of Weyl Fermions is produced that leads to new physical properties. WTe2 is interesting because it exhibits anomalously large magnetoresistance. It has ignited a new excitement because it is proposed to be the first candidate of realizing type II Weyl Fermions. Here we report our angle-resolved photoemission (ARPES) evidence on identifying the type II Weyl Fermion state in WTe2. By utilizing our latest generation laser-based ARPES system with superior energy and momentum resolutions, we have revealed a full picture on the electronic structure of WTe2. Clear surface state has been identified and its connection with the bulk electronic states in the momentum and energy space shows a good agreement with the calculated band structures with the type II Weyl states. Our results provide spectroscopic evidence on the observation of type II Weyl states in WTe2. It has laid a foundation for further exploration of novel phenomena and physical properties in the type II Weyl semimetals.

cond-mat.mes-hall↗

arXiv2016

Electronic Evidence for Type II Weyl Semimetal State in MoTe2

Topological quantum materials, including topological insulators and superconductors, Dirac semimetals and Weyl semimetals, have attracted much attention recently for their unique electronic structure, spin texture and physical properties. Very lately, a new type of Weyl semimetals has been proposed where the Weyl Fermions emerge at the boundary between electron and hole pockets in a new phase of matter, which is distinct from the standard type I Weyl semimetals with a point-like Fermi surface. The Weyl cone in this type II semimetals is strongly tilted and the related Fermi surface undergos a Lifshitz transition, giving rise to a new kind of chiral anomaly and other new physics. MoTe2 is proposed to be a candidate of a type II Weyl semimetal; the sensitivity of its topological state to lattice constants and correlation also makes it an ideal platform to explore possible topological phase transitions. By performing laser-based angle-resolved photoemission (ARPES) measurements with unprecedentedly high resolution, we have uncovered electronic evidence of type II semimetal state in MoTe2. We have established a full picture of the bulk electronic states and surface state for MoTe2 that are consistent with the band structure calculations. A single branch of surface state is identified that connects bulk hole pockets and bulk electron pockets. Detailed temperature-dependent ARPES measurements show high intensity spot-like features that is ~40 meV above the Fermi level and is close to the momentum space consistent with the theoretical expectation of the type II Weyl points. Our results constitute electronic evidence on the nature of the Weyl semimetal state that favors the presence of two sets of type II Weyl points in MoTe2.

cond-mat.mtrl-sci↗

arXiv2016

Electronic Evidence of Temperature-Induced Lifshitz Transition and Topological Nature in ZrTe5

The topological materials have attracted much attention recently. While three-dimensional topological insulators are becoming abundant, two-dimensional topological insulators remain rare, particularly in natural materials. ZrTe5 has host a long-standing puzzle on its anomalous transport properties; its underlying origin remains elusive. Lately, ZrTe5 has ignited renewed interest because it is predicted that single-layer ZrTe5 is a two-dimensional topological insulator and there is possibly a topological phase transition in bulk ZrTe5. However, the topological nature of ZrTe5 is under debate as some experiments point to its being a three-dimensional or quasi-two-dimensional Dirac semimetal. Here we report high-resolution laser-based angle-resolved photoemission measurements on ZrTe5. The electronic property of ZrTe5 is dominated by two branches of nearly-linear-dispersion bands at the Brillouin zone center. These two bands are separated by an energy gap that decreases with decreasing temperature but persists down to the lowest temperature we measured (~2 K). The overall electronic structure exhibits a dramatic temperature dependence; it evolves from a p-type semimetal with a hole-like Fermi pocket at high temperature, to a semiconductor around ~135 K where its resistivity exhibits a peak, to an n-type semimetal with an electron-like Fermi pocket at low temperature. These results indicate a clear electronic evidence of the temperature-induced Lifshitz transition in ZrTe5. They provide a natural understanding on the underlying origin of the resistivity anomaly at ~135 K and its associated reversal of the charge carrier type. Our observations also provide key information on deciphering the topological nature of ZrTe5 and possible temperature-induced topological phase transition.

cond-mat.mtrl-sci↗

arXiv2015

Identification of Topological Surface State in PdTe2 Superconductor by Angle-Resolved Photoemission Spectroscopy

High resolution angle-resolved photoemission measurements have been carried out on transition metal dichalcogenide PdTe2 that is a superconductor with a Tc at 1.7 K. Combined with theoretical calculations, we have discovered for the first time the existence of topologically nontrivial surface state with Dirac cone in PbTe2 superconductor. It is located at the Brillouin zone center and possesses helical spin texture. Distinct from the usual three-dimensional topological insulators where the Dirac cone of the surface state lies at the Fermi level, the Dirac point of the surface state in PdTe2 lies deep below the Fermi level at ~1.75 eV binding energy and is well separated from the bulk states. The identification of topological surface state in PdTe2 superconductor deep below the Fermi level provides a unique system to explore for new phenomena and properties and opens a door for finding new topological materials in transition metal chalcogenides.

cond-mat.supr-con↗

arXiv2015

Electronic Structure of Transition Metal Dichalcogenides PdTe2 and Cu0.05PdTe2 Superconductors Obtained by Angle-Resolved Photoemission Spectroscopy

The layered transition metal chalcogenides have been a fertile land in solid state physics for many decades. Various MX2-type transition metal dichalcogenides, such as WTe2, IrTe2, and MoS2, have triggered great attention recently, either for the discovery of novel phenomena or some extreme or exotic physical properties, or for their potential applications. PdTe2 is a superconductor in the class of transition metal dichalcogenides, and superconductivity is enhanced in its Cu-intercalated form, Cu0.05PdTe2. It is important to study the electronic structures of PdTe2 and its intercalated form in order to explore for new phenomena and physical properties and understand the related superconductivity enhancement mechanism. Here we report systematic high resolution angle-resolved photoemission (ARPES) studies on PdTe2 and Cu0.05$PdTe2 single crystals, combined with the band structure calculations. We present for the first time in detail the complex multi-band Fermi surface topology and densely-arranged band structure of these compounds. By carefully examining the electronic structures of the two systems, we find that Cu-intercalation in PdTe2 results in electron-doping, which causes the band structure to shift downwards by nearly 16 meV in Cu0.05PdTe2. Our results lay a foundation for further exploration and investigation on PdTe2 and related superconductors.

cond-mat.supr-con↗

arXiv2015

Common Electronic Origin of Superconductivity in (Li,Fe)OHFeSe Bulk Superconductor and Single-Layer FeSe/SrTiO3 Films

The mechanism of high temperature superconductivity in the iron-based superconductors remains an outstanding issue in condensed matter physics. The electronic structure, in particular the Fermi surface topology, is considered to play an essential role in dictating the superconductivity. Recent revelation of distinct electronic structure and possible high temperature superconductivity with a transition temperature Tc above 65 K in the single-layer FeSe films grown on the SrTiO3 substrate provides key information on the roles of Fermi surface topology and interface in inducing or enhancing superconductivity. Here we report high resolution angle-resolved photoemission measurement on the electronic structure and superconducting gap of a novel FeSe-based superconductor, (Li0.84Fe0.16)OHFe0.98Se, with a Tc at 41 K. We find that this single-phase bulk superconductor shows remarkably similar electronic behaviors to that of the superconducting single-layer FeSe/SrTiO3 film in terms of Fermi surface topology, band structure and nearly isotropic superconducting gap without nodes. These observations provide significant insights in understanding high temperature superconductivity in the single-layer FeSe/SrTiO3 film in particular, and the mechanism of superconductivity in the iron-based superconductors in general.

cond-mat.supr-con↗

arXiv2015

Electronic Structure and Superconductivity of FeSe-Related Superconductors

The FeSe superconductor and its related systems have attracted much attention in the iron-based superconductors owing to their simple crystal structure and peculiar electronic and physical properties. The bulk FeSe superconductor has a superconducting transition temperature (Tc) of ~8 K; it can be dramatically enhanced to 37 K at high pressure. On the other hand, its cousin system, FeTe, possesses a unique antiferromagnetic ground state but is non-superconducting. Substitution of Se by Te in the FeSe superconductor results in an enhancement of Tc up to 14.5 K and superconductivity can persist over a large composition range in the Fe(Se,Te) system. Intercalation of the FeSe superconductor leads to the discovery of the AxFe2-ySe2 (A=K, Cs and Tl) system that exhibits a Tc higher than 30 K and a unique electronic structure of the superconducting phase. The latest report of possible high temperature superconductivity in the single-layer FeSe/SrTiO3 films with a Tc above 65 K has generated much excitement in the community. This pioneering work opens a door for interface superconductivity to explore for high Tc superconductors. The distinct electronic structure and superconducting gap, layer-dependent behavior and insulator-superconductor transition of the FeSe/SrTiO3 films provide critical information in understanding the superconductivity mechanism of the iron-based superconductors. In this paper, we present a brief review on the investigation of the electronic structure and superconductivity of the FeSe superconductor and related systems, with a particular focus on the FeSe films.

cond-mat.supr-con↗