Search arXivSearch

arXiv subjects

Luis Sentis

Publications and source records attributed to Luis Sentis.

At least 19 recordsLinked to original sources

Whole-Body Planning for Humanoids Navigating Confined Spaces via Self-Collision Avoidance References

Humanoid locomotion in highly confined environments requires navigating dense environmental obstacles and complex self-collision bounds while maintaining multi-contact dynamic feasibility. Traditional trajectory optimizers frequently struggle in these restricted spaces, as navigating the large collision space with splines on particle abstractions is insufficient and leads to poor local minima. To address this, we propose a three-stage whole-body planning framework that formulates kinematic path planning directly over kinematically reachable rigid-body volumes. By integrating differentiable collision avoidance into a reachability-constrained formulation, our framework synthesizes volume-informed guides that reliably guide a full-order trajectory optimizer over long horizons. We show that these optimized plans serve as high-quality references to train a residual reinforcement learning policy for robust online execution. We validate our approach on the Unitree G1 humanoid across three benchmark testbeds exceeding NIST emergency response standards, achieving restricted confinement ratios ($C_r < 1.5$). Our framework generates feasible trajectories across 12-to-18-second tasks with complex foot and hand contacts where standard baselines fail, while the learned policy successfully tracks these plans under extensive domain randomization in physics simulation.

cs.RO

AeroMap3D: Anchoring Monocular UAV 6-DoF Localization to Visual-Geometric-Semantic Map Priors

We present AeroMap3D, a monocular 6-DoF UAV localization system that anchors onboard imagery to visual, geometric, and semantic map priors for GNSS-denied navigation. AeroMap3D addresses two fundamental challenges in map-referenced aerial localization: the cross-view discrepancy between UAV imagery and satellite maps, and the structural inconsistency between bare-earth digital elevation models (DEMs) and urban scenes. First, we introduce a lightweight adapter that enables a dense matcher pretrained on internet-scale generic data to perform reliable UAV-to-map registration without finetuning. By estimating the scale ratio and yaw offset between the UAV image and map tile, the adapter removes the dominant geometric misalignment induced by altitude, camera field of view, and heading before dense correspondence estimation. Second, AeroMap3D lifts 2D UAV-map correspondences onto DEM terrain while using OpenStreetMap annotations to reject semantically unreliable matches before RANSAC-PnP pose estimation, thereby reducing errors caused by unmodeled building heights and off-nadir structures. Delayed map-based pose measurements are further fused with relative-motion priors using a delayed-state EKF for continuous trajectory estimation. Without UAV-Terra3D retraining or tuning, AeroMap3D localizes all trajectories across eight Austin sites within 50 m and achieves 5.88 m mean 3D error over 55 km of flight.

cs.RO

A Bilateral Teleoperation Framework for Dexterous Manipulation

Dexterous teleoperation requires precise arm-hand coordination, low-latency feedback, and robust interaction in real-world contact-rich environments. This paper presents a modular bilateral teleoperation framework that integrates operator-side input interfaces with a robot-side dexterous hand and compliant robotic arm in a unified control architecture. The system supports position-based hand retargeting, differential arm control, multi-scale haptic feedback, and shared control for stable manipulation. We validate the framework through a real-world dexterous manipulation task, highlighting coordinated arm-hand control and contact-aware interaction. Beyond feasibility, we identify key design insights related to cross-embodiment mismatch, haptic feedback granularity, and shared control. The proposed platform provides a practical teleoperation system and a foundation for collecting high-quality demonstrations for future learning-from-demonstration research.

cs.RO

Too Much of a Good Thing: When sim2real Efforts Impede Policy Learning (And What to Do About It)

While sim2real efforts are necessary for effective policy transfer to hardware, there is such a thing as too much of a good thing. We argue that sim2real efforts have led to misaligned incentives with policy learning, resulting in simulator lock in and poor policy exploration due to the unreasonable constraints imposed by the real world. We offer a diagnosis and explanation of the current status of the problem, and propose a potential solution via a sim2sim2real paradigm that leverages the robot's kinematics as the sole design constraint.

cs.RO

ARISTO Hand: Sensing-Driven Distal Hyperextension for Fine-Grained Manipulation

Manipulating thin objects requires precise contact geometry and reliable force perception, yet many anthropomorphic robotic hands lack the mechanical and sensing capabilities needed for such interactions. We present the ARISTO Hand, a tendon-driven robotic hand that integrates active distal hyperextension with a hybrid fingertip-sensing architecture that combines a rigid, nail-mounted force-torque sensor and a soft capacitive tactile array. Active hyperextension enables controlled fingertip engagement beyond the kinematic limits of standard flexion, increasing pull-out force by 2.76x for object thicknesses of 1-20 mm while preserving the nominal grasp capability. The rigid nail-mounted sensor provides reliable force measurements during edge contacts, where the sensitivity of proprioceptive force estimation degrades as the contact geometry approaches kinematic singularities. We validate the proposed architecture through quantitative force characterization and a multi-stage SD card extraction and insertion task. Video and supplementary materials are available at: https://aristohand.github.io

cs.RO

Why Cognitive Robotics Matters: Lessons from OntoAgent and LLM Deployment in HARMONIC for Safety-Critical Robot Teaming

Deploying embodied AI agents in the physical world demands cognitive capabilities for long-horizon planning that execute reliably, deterministically, and transparently. We present HARMONIC, a cognitive-robotic architecture that pairs OntoAgent, a content-centric cognitive architecture providing metacognitive self-monitoring, domain-grounded diagnosis, and consequence-based action selection over ontologically structured knowledge, with a modular reactive tactical layer. HARMONIC's modular design enables a functional evaluation of whether LLMs can replicate OntoAgent's cognitive capabilities, evaluated within the same robotic system under identical conditions. Six LLMs spanning frontier and efficient tiers replace OntoAgent in a collaborative maintenance scenario under native and knowledge-equalized conditions. Results reveal that LLMs do not consistently assess their own knowledge state before acting, causing downstream failures in diagnostic reasoning and action selection. These deficits persist even with equivalent procedural knowledge, indicating the issues are architectural rather than knowledge-based. These findings support the design of physically embodied systems in which cognitive architectures retain primary authority for reasoning, owing to their deterministic and transparent characteristics.

cs.RO

PLATO Hand: Shaping Contact Behavior with Fingernails for Precise Manipulation

We present the PLATO Hand, a dexterous robotic hand with a hybrid fingertip that combines a rigid fingernail, embedded distal phalanx, and compliant pulp to shape contact behavior during manipulation. \rrev{By mechanically organizing how contact is initiated, supported, and transmitted at the fingertip, this structure creates stable and task-relevant contact conditions across diverse object geometries and grasp orientations.} We develop a strain-energy-based bending--indentation model to guide the fingertip design and to explain how material stiffness and contact geometry govern deformation partitioning within the fingertip. \rrev{Experiments show improved pinch stability, improved fingernail-mediated dorsal-contact force transmission and proprioceptive observability}, and successful execution of edge-sensitive manipulation tasks, including paper singulation, card picking, and orange peeling. These results show that coupling a mechanically structured contact interface with a force-motion-transparent finger mechanism provides a principled approach to precise manipulation. Our project page is at: https://platohand.github.io

cs.RO

HARMONIC: A Content-Centric Cognitive Robotic Architecture

This paper introduces HARMONIC, a cognitive-robotic architecture designed for robots in human-robotic teams. HARMONIC supports semantic perception interpretation, human-like decision-making, and intentional language communication. It addresses the issues of safety and quality of results; aims to solve problems of data scarcity, explainability, and safety; and promotes transparency and trust. Two proof-of-concept HARMONIC-based robotic systems are demonstrated, each implemented in both a high-fidelity simulation environment and on physical robotic platforms.

cs.RO

Curate, Connect, Inquire: A System for Findable Accessible Interoperable and Reusable (FAIR) Human-Robot Centered Datasets

The rapid growth of AI in robotics has amplified the need for high-quality, reusable datasets, particularly in human-robot interaction (HRI) and AI-embedded robotics. While more robotics datasets are being created, the landscape of open data in the field is uneven. This is due to a lack of curation standards and consistent publication practices, which makes it difficult to discover, access, and reuse robotics data. To address these challenges, this paper presents a curation and access system with two main contributions: (1) a structured methodology to curate, publish, and integrate FAIR (Findable, Accessible, Interoperable, Reusable) human-centered robotics datasets; and (2) a ChatGPT-powered conversational interface trained with the curated datasets metadata and documentation to enable exploration, comparison robotics datasets and data retrieval using natural language. Developed based on practical experience curating datasets from robotics labs within Texas Robotics at the University of Texas at Austin, the system demonstrates the value of standardized curation and persistent publication of robotics data. The system's evaluation suggests that access and understandability of human-robotics data are significantly improved. This work directly aligns with the goals of the HCRL @ ICRA 2025 workshop and represents a step towards more human-centered access to data for embodied AI.

cs.IR

Path Integral Methods for Synthesizing and Preventing Stealthy Attacks in Nonlinear Cyber-Physical Systems

This paper studies the synthesis and mitigation of stealthy attacks in nonlinear cyber-physical systems (CPS). To quantify stealthiness, we employ the Kullback-Leibler (KL) divergence, a measure rooted in hypothesis testing and detection theory, which captures the trade-off between an attacker's desire to remain stealthy and her goal of degrading system performance. First, we synthesize the worst-case stealthy attack in nonlinear CPS using the path integral approach. Second, we consider how a controller can mitigate the impact of such stealthy attacks by formulating a minimax KL control problem, yielding a zero-sum game between the attacker and the controller. Again, we leverage a path integral-based solution that computes saddle-point policies for both players through Monte Carlo simulations. We validate our approach using unicycle navigation and cruise control problems, demonstrating how an attacker can covertly drive the system into unsafe regions, and how the controller can adapt her policy to combat the worst-case attacks.

eess.SY

Task Hierarchical Control via Null-Space Projection and Path Integral Approach

This paper addresses the problem of hierarchical task control, where a robotic system must perform multiple subtasks with varying levels of priority. A commonly used approach for hierarchical control is the null-space projection technique, which ensures that higher-priority tasks are executed without interference from lower-priority ones. While effective, the state-of-the-art implementations of this method rely on low-level controllers, such as PID controllers, which can be prone to suboptimal solutions in complex tasks. This paper presents a novel framework for hierarchical task control, integrating the null-space projection technique with the path integral control method. Our approach leverages Monte Carlo simulations for real-time computation of optimal control inputs, allowing for the seamless integration of simpler PID-like controllers with a more sophisticated optimal control technique. Through simulation studies, we demonstrate the effectiveness of this combined approach, showing how it overcomes the limitations of traditional

cs.RO

LEGATO: Cross-Embodiment Imitation Using a Grasping Tool

Cross-embodiment imitation learning enables policies trained on specific embodiments to transfer across different robots, unlocking the potential for large-scale imitation learning that is both cost-effective and highly reusable. This paper presents LEGATO, a cross-embodiment imitation learning framework for visuomotor skill transfer across varied kinematic morphologies. We introduce a handheld gripper that unifies action and observation spaces, allowing tasks to be defined consistently across robots. We train visuomotor policies on task demonstrations using this gripper through imitation learning, applying transformation to a motion-invariant space for computing the training loss. Gripper motions generated by the policies are retargeted into high-degree-of-freedom whole-body motions using inverse kinematics for deployment across diverse embodiments. Our evaluations in simulation and real-robot experiments highlight the framework's effectiveness in learning and transferring visuomotor skills across various robots. More information can be found on the project page: https://ut-hcrl.github.io/LEGATO.

cs.RO

Achieving multi uav best viewpoint coordination in obstructed environments

Wildfire suppression is a complex task that poses high risks to humans. Using robotic teams for wildfire suppression enhances the safety and efficiency of detecting, monitoring, and extinguishing fires. We propose a control architecture based on task hierarchical control for the autonomous steering of a system of flying robots in wildfire suppression. We incorporate a novel line-of-sight obstacle avoidance method that calculates the best viewpoints and ensures an occlusion-free view for the suppression robot during the mission. Path integral control generates optimal trajectories towards the goals. We conduct an ablation study to assess the effectiveness of our approach by comparing it to scenarios where these key components are excluded, in order to validate the approach in simulations using Matlab and Unity. The results demonstrate significant performance improvements, with 44.0 % increase in effectiveness with the new line-of-sight obstacle avoidance task and up to 39.6 % improvement when using path integral control.

eess.SY

Guiding Collision-Free Humanoid Multi-Contact Locomotion using Convex Kinematic Relaxations and Dynamic Optimization

Humanoid robots rely on multi-contact planners to navigate a diverse set of environments, including those that are unstructured and highly constrained. To synthesize stable multi-contact plans within a reasonable time frame, most planners assume statically stable motions or rely on reduced order models. However, these approaches can also render the problem infeasible in the presence of large obstacles or when operating near kinematic and dynamic limits. To that end, we propose a new multi-contact framework that leverages recent advancements in relaxing collision-free path planning into a convex optimization problem, extending it to be applicable to humanoid multi-contact navigation. Our approach generates near-feasible trajectories used as guides in a dynamic trajectory optimizer, altogether addressing the aforementioned limitations. We evaluate our computational approach showcasing three different-sized humanoid robots traversing a high-raised naval knee-knocker door using our proposed framework in simulation. Our approach can generate motion plans within a few seconds consisting of several multi-contact states, including dynamic feasibility in joint space.

cs.RO

HARMONIC: Cognitive and Control Collaboration in Human-Robotic Teams

This paper describes HARMONIC, a cognitive-robotic architecture that integrates the OntoAgent cognitive framework with general-purpose robot control systems applied to human-robot teaming (HRT). HARMONIC incorporates metacognition, meaningful natural language communication, and explainability capabilities required for developing mutual trust in HRT. Through simulation experiments involving a joint search task performed by a heterogeneous team of two HARMONIC-based robots and a human operator, we demonstrate heterogeneous robots that coordinate their actions, adapt to complex scenarios, and engage in natural human-robot communication. Evaluation results show that HARMONIC-based robots can reason about plans, goals, and team member attitudes while providing clear explanations for their decisions, which are essential requirements for realistic human-robot teaming.

cs.RO

RPC: A Modular Framework for Robot Planning, Control, and Deployment

This paper presents an open-source, lightweight, yet comprehensive software framework, named RPC, which integrates physics-based simulators, planning and control libraries, debugging tools, and a user-friendly operator interface. RPC enables users to thoroughly evaluate and develop control algorithms for robotic systems. While existing software frameworks provide some of these capabilities, integrating them into a cohesive system can be challenging and cumbersome. To overcome this challenge, we have modularized each component in RPC to ensure easy and seamless integration or replacement with new modules. Additionally, our framework currently supports a variety of model-based planning and control algorithms for robotic manipulators and legged robots, alongside essential debugging tools, making it easier for users to design and execute complex robotics tasks. The code and usage instructions of RPC are available at https://github.com/shbang91/rpc.

cs.RO

Hardware-Accelerated Ray Tracing for Discrete and Continuous Collision Detection on GPUs

This paper presents a set of simple and intuitive robot collision detection algorithms that show substantial scaling improvements for high geometric complexity and large numbers of collision queries by leveraging hardware-accelerated ray tracing on GPUs. It is the first leveraging hardware-accelerated ray-tracing for direct volume mesh-to-mesh discrete collision detection and applying it to continuous collision detection. We introduce two methods: Ray-Traced Discrete-Pose Collision Detection for exact robot mesh to obstacle mesh collision detection, and Ray-Traced Continuous Collision Detection for robot sphere representation to obstacle mesh swept collision detection, using piecewise-linear or quadratic B-splines. For robot link meshes totaling 24k triangles and obstacle meshes of over 190k triangles, our methods were up to 3 times faster in batched discrete-pose queries than a state-of-the-art GPU-based method using a sphere robot representation. For the same obstacle mesh scene, our sphere-robot continuous collision detection was up to 9 times faster depending on trajectory batch size. We also performed a detailed measurement of the volume coverage accuracy of various sphere/mesh pose/path representations to provide insight into the tradeoffs between speed and accuracy of different robot collision detection methods.

cs.RO

Grasp Failure Constraints for Fast and Reliable Pick-and-Place Using Multi-Suction-Cup Grippers

Multi-suction-cup grippers are frequently employed to perform pick-and-place robotic tasks, especially in industrial settings where grasping a wide range of light to heavy objects in limited amounts of time is a common requirement. However, most existing works focus on using one or two suction cups to grasp only irregularly shaped but light objects. There is a lack of research on robust manipulation of heavy objects using larger arrays of suction cups, which introduces challenges in modeling and predicting grasp failure. This paper presents a general approach to modeling grasp strength in multi-suction-cup grippers, introducing new constraints usable for trajectory planning and optimization to achieve fast and reliable pick-and-place maneuvers. The primary modeling challenge is the accurate prediction of the distribution of loads at each suction cup while grasping objects. To solve for this load distribution, we find minimum spring potential energy configurations through a simple quadratic program. This results in a computationally efficient analytical solution that can be integrated to formulate grasp failure constraints in time-optimal trajectory planning. Finally, we present experimental results to validate the efficiency and accuracy of the proposed model.

cs.RO