arXiv subjects

M. Ferrari

Publications and source records attributed to M. Ferrari.

17 recordsLinked to original sources

arXiv2026

PROVIDENCE: a ground station for space observation

PROVIDENCE is an ONERA-led project to install a new-generation optical ground station at the Haute-Provence Observatory (OHP) in South of France. Built around a 2.5-meter aperture, the station addresses five core science cases: space domain awareness, astronomy, laser activities and communications, atmospheric characterization, and instrumental prototyping. The project is organized into three parallel subprojects covering the telescope (Providence T), the building (Providence B), and the instruments (Providence I), the latter including the facility's first-light adaptive optics instrument, INTERSTELLAR. This paper presents the scientific motivation, the project architecture, the telescope technical specifications, the civil-engineering challenges associated with replacing the existing T152 equatorial telescope, and the station layout designed to host multiple co-active instrument teams. The project roadmap targets First Light in 2029, timed to track the close-approach flyby of asteroid Apophis.

astro-ph.IM↗

arXiv2025

Effect of temperature and excitation power on down-conversion process in Tb3+/Yb3+-activated silica-hafnia glass-ceramic films

Transparent glass ceramics, when activated by rare earth ions, are excellent photonic materials. Regarding photonic glass-ceramics based on silicates, hafnia and silica in a binary system has proved to be an excellent matrix to incorporate rare earth ions in the hafnia nanocrystals, resulting in important luminescence enhancement and, consequently, allowing a large spectrum of critical applications. Here we will focus on the downconversion mechanism driven by the couple Tb3+/Yb3+, largely exploited in photovoltaic systems. The research presented here has been performed on 70SiO2-30HfO2 silica-hafnia glass-ceramic films activated with 19 % rare earth ions: [Tb + Yb]/[Si + Hf] = 19 %. Two main results will be discussed: (a) the intensity and the broadening of the Yb3+ emission band at 975 nm were found to be temperature-dependent, as shown in the figure; (b) the energy transfer mechanism Tb3+ >> Yb3+ will be discussed, referring to the mechanisms that have been proposed in the literature. In relation to the latter topic, the power dependence spectra for the luminescence of Yb3+: 2F5/2 >> 2F7/2 will be discussed.

cond-mat.mtrl-sci↗

arXiv2024

How the StarDICE photometric calibration of standard stars can improve cosmological constraints?

The number of type Ia supernova (SNe Ia) observations will grow significantly within the next decade, mainly thanks to the Legacy Survey of Space and Time (LSST) undertaken by the Vera Rubin Observatory in Chile. With this improvement, statistical uncertainties will decrease, and flux calibration will become the main uncertainty for the characterization of dark energy. Currently, the astronomical flux scale is anchored on the numerical models of white dwarf atmospheres from the CALSPEC catalog, and every error on the model can induce a bias over cosmological parameters inference. The StarDICE experiment proposes a new calibration reference that only relies on observations from the optical watt defined by the NIST towards the magnitude of standard stars. It is currently operating at l'Observatoire de Haute-Provence and has been collecting data since the beginning of 2023. To overcome the photometric calibration uncertainty and reach a sub-percent precision, the instrument throughput has been calibrated with a Collimated Beam Projector. It will be monitored on-site with a LED-based artificial star source calibrated with NIST photodiodes. In this proceeding, we will first illustrate how an error in the photometric calibration can impact the SNe Ia distance moduli and thus bias the measurement of cosmological parameters. Then we will present the StarDICE experiment and how we can recalibrate the CALSPEC catalog at the millimagnitude level on the NIST scale with photometric analysis.

astro-ph.IM↗

arXiv2024

Multi-purpose InSTRument for Astronomy at Low-resolution: MISTRAL@OHP

MISTRAL is the new Faint Object Spectroscopic Camera mounted at the folded Cassegrain focus of the 1.93m telescope of Haute-Provence Observatory. We describe the design and components of the instrument and give some details about its operation. We emphasise in particular the various observing modes and the performances of the detector. A short description is also given about the working environment. Various types of objects, including stars, nebulae, comets, novae, galaxies have been observed during various test phases to evaluate the performances of the instrument. The instrument covers the range of 4000 to 8000A with the blue setting, or from 6000 to 10000A with the red setting, at an average spectral resolution of 700. Its peak efficiency is about 22% at 6000A. In spectroscopy, a limiting magnitude of 19.5 can be achieved for a point source in one hour with a signal to noise of 3 in the continuum (and better if emission lines are present). In imaging mode, limiting magnitudes of 20-21 can be obtained in 10-20mn (with average seing conditions of 2.5 arcsec at OHP). The instrument is very users-friendly and can be put into operations in less than 15mn (rapid change-over from the other instrument in use) if required by the science (like for Gamma-Rays Bursts). Some first scientific results are described for various types of objects, and in particular for the follow-up of GRBs. While some further improvements are still under way, in particular to ease the switch from blue to red setting and add more grisms or filters, MISTRAL is ready for the follow-up of transients and other variable objects, in the soon-to-come era of e.g. the SVOM satellite and of the Rubin telescope.

astro-ph.IM↗

arXiv2022

Design development and implementation of an irradiation station at the neutron time-of-flight facility at CERN

A new parasitic, mixed-field, neutron-dominated irradiation station has been recently commissioned at the European Laboratory for Particle Physics (CERN). The station is installed in the Neutron Time-Of-Flight (n\_TOF) facility, taking advantage of the secondary radiation produced by the neutron spallation target. The new station allows radiation damage studies to be performed in irradiation conditions that are closer to the ones encountered during the operation of particle accelerators; the irradiation tests carried out in the station will be complementary to the standard tests on materials, usually performed with gamma sources. Samples will be exposed to neutron doses in the MGy range per year, with minimal impact on the n TOF facility operation. The station has twenty-four irradiation positions, each hosting up to 100 cm3 of sample material. In view of its proximity to the n\_TOF target, inside protective shielding, the irradiation station and its operating procedures have been carefully developed taking into account the safety of personnel and to avoid any unwanted impact on the operation of the n\_TOF facility and experiments. Due to the residual radioactivity of the whole area around the n\_TOF target and of the irradiated samples, access to the irradiation station is forbidden to human operators even when the n\_TOF facility is not in operation. Robots are used for the remote installation and retrieval of the samples, and other optimizations of the handling procedures were developed in compliance with radiation protection regulations and the aim of minimizing doses to personnel.

physics.ins-det↗

arXiv2021

Design and behaviour of the Large Hadron Collider external beam dumps capable of receiving 539 MJ/dump

Two 6-t beam dumps, made of a graphite core encapsulated in a stainless steel vessel, are used to absorb the energy of the two Large Hadron Collider (LHC) intense proton beams during operation of the accelerator. Operational issues started to appear in 2015 during LHC Run 2 (2014-2018) as a consequence of the progressive increase of the LHC beam kinetic energy, necessitating technical interventions in the highly radioactive areas around the dumps. Nitrogen gas leaks appeared after highly energetic beam impacts and instrumentation measurements indicated an initially unforeseen movement of the dumps. A computer modelling analysis campaign was launched to understand the origin of these issues, including both Monte Carlo simulations to model the proton beam interaction as well as advanced thermo-mechanical analyses. The main findings were that the amount of instantaneous energy deposited in the dump vessel leads to a strong dynamic response of the whole dump and high accelerations (above 2000g). Based on these findings, an upgraded design, including a new support system and beam windows, was implemented to ensure the dumps' compatibility with the more intense beams foreseen during LHC Run 3 (2022-2025) of 539 MJ per beam. In this paper an integral overview of the operational behaviour of the dumps and the upgraded configurations are discussed.

physics.acc-ph↗

arXiv2020

The surface of (1) Ceres in visible light as seen by Dawn/VIR

We study the surface of Ceres at visible wavelengths, as observed by the Visible and InfraRed mapping spectrometer (VIR) onboard the Dawn spacecraft, and analyze the variations of various spectral parameters across the whole surface. We also focus on several noteworthy areas of the surface of this dwarf planet. We made use of the newly corrected VIR visible data to build global maps of a calibrated radiance factor at 550 nm, with two color composites and three spectral slopes between 400 and 950 nm. We have made these maps available for the community via the Aladin Desktop software. Ceres surface shows diverse spectral behaviors in the visible range. The color composite and the spectral slope between 480 and 800 nm highlight fresh impact craters and young geologic formations of endogenous origin, which appear bluer than the rest of the surface. The steep slope before 465 nm displays very distinct variations and may be a proxy for the absorptions caused by the $O_2^{-}$ -> $Fe^{3+}$ or the $2Fe^{3+}$ -> $Fe^{2+} + Fe^{4+}$ charge transfer, if the latter are found to be responsible for the drop in this spectral range. We notice several similarities between the spectral slopes and the abundance of phyllosilicates detected in the infrared by the VIR, whereas no correlation can be clearly established with carbonate species. The region of the Dantu impact crater presents a peculiar spectral behavior (especially through the color and the spectral slope before 465 nm) suggesting a change in composition or in the surface physical properties that is not observed elsewhere on Ceres.

astro-ph.EP↗

arXiv2020

CASTLE: performances and science cases

We present here the Calar Alto Schmidt-Lemaitre Telescope (CASTLE) concept, a technology demonstrator for curved detectors, that will be installed at the Calar Alto Observatory (Spain). This telescope has a wide field of view (2.36x1.56 deg^2) and a design, optimised to generate a Point Spread Function with very low level wings and reduced ghost features, which makes it considerably less susceptible to several systematic effects usually affecting similar systems. These characteristics are particularly suited to study the low surface brightness Universe. CASTLE will be able to reach surface brightness orders of magnitude fainter than the sky background level and observe the extremely extended and faint features around galaxies such as tidal features, stellar halos, intra-cluster light, etc. CASTLE will also be used to search and detect astrophysical transients such as gamma ray bursts (GRB), gravitational wave optical counterparts, neutrino counterparts, etc. This will increase the number of precisely localized GRBs from 20% to 60% (in the case of Fermi/GMB GRBs).

astro-ph.IM↗

arXiv2019

The Search for Living Worlds and the Connection to Our Cosmic Origins

One of the most exciting scientific challenges is to detect Earth-like planets in the habitable zones of other stars in the galaxy and search for evidence of life. The ability to observe and characterise dozens of potentially Earth-like planets now lies within the realm of possibility due to rapid advances in key space and imaging technologies. The associated challenge of directly imaging very faint planets in orbit around nearby very bright stars is now well understood, with the key instrumentation also being perfected and developed. Such advances will allow us to develop large transformative telescopes, covering a broad UV-optical-IR spectral range, which can carry out the detailed research programmes designed to answer the questions we wish to answer: Carry out high contrast imaging surveys of nearby stars to search for planets within their habitable zones. Characterise the planets detected to determine masses and radii from photometric measurements. Through spectroscopic studies of their atmospheres and surfaces, search for habitability indicators and for signs of an environment that has been modified by the presence of life. Active studies of potential missions have been underway for a number of years. The latest of these is the Large UV Optical IR space telescope (LUVOIR), one of four flagship mission studies commissioned by NASA in support of the 2020 US Decadal Survey. LUVOIR, if selected, will be of interest to a wide scientific community and will be the only telescope capable of searching for and characterizing a sufficient number of exoEarths to provide a meaningful answer to the question - Are we alone?. This paper is a submission to the European Space Agency Voyage 2050 call for white papers outlining the case for an ESA contribution to a Large UVOIR telescope.

astro-ph.EP↗

arXiv2017

Polarized micro-Raman studies of femtosecond laser written stress-induced optical waveguides in diamond

Understanding the physical mechanisms of the refractive index modulation induced by femtosecond laser writing is crucial for tailoring the properties of the resulting optical waveguides. In this work we apply polarized Raman spectroscopy to study the origin of stress-induced waveguides in diamond, produced by femtosecond laser writing. The change in the refractive index induced by the femtosecond laser in the crystal is derived from the measured stress in the waveguides. The results help to explain the waveguide polarization sensitive guiding mechanism, as well as providing a technique for their optimization.

physics.optics↗

arXiv2017

Integrated waveguides and deterministically positioned nitrogen vacancy centers in diamond created by femtosecond laser writing

Diamond's nitrogen vacancy (NV) center is an optically active defect with long spin coherence times, showing great potential for both efficient nanoscale magnetometry and quantum information processing schemes. Recently, both the formation of buried 3D optical waveguides and high quality single NVs in diamond were demonstrated using the versatile femtosecond laser-writing technique. However, until now, combining these technologies has been an outstanding challenge. In this work, we fabricate laser written photonic waveguides in quantum grade diamond which are aligned to within micron resolution to single laser-written NVs, enabling an integrated platform providing deterministically positioned waveguide-coupled NVs. This fabrication technology opens the way towards on-chip optical routing of single photons between NVs and optically integrated spin-based sensing.

quant-ph↗

arXiv2015

Apodization in high-contrast long-slit spectroscopy. II. Concept validation and first on-sky results with VLT/SPHERE

Spectral characterization of young, giant exoplanets detected by direct imaging is one of the tasks of the new generation of high-contrast imagers. For this purpose, the VLT/SPHERE instrument includes a unique long-slit spectroscopy (LSS) mode coupled with Lyot coronagraphy in its infrared dual-band imager and spectrograph (IRDIS). The performance of this mode is intrinsically limited by the use of a non-optimal coronagraph, but in a previous work we demonstrated that it could be significantly improved at small inner-working angles using the stop-less Lyot coronagraph (SLLC). We now present the development, testing, and validation of the first SLLC prototype for VLT/SPHERE. Based on the transmission profile previously proposed, the prototype was manufactured using microdots technology and was installed inside the instrument in 2014. The transmission measurements agree well with the specifications, except in the very low transmissions (<5% in amplitude). The performance of the SLLC is tested in both imaging and spectroscopy using data acquired on the internal source. In imaging, we obtain a raw contrast gain of a factor 10 at 0.3" and 5 at 0.5" with the SLLC. Using data acquired with a focal-plane mask, we also demonstrate that no Lyot stop is required to reach the full performance, which validates the SLLC concept. Comparison with a realistic simulation model shows that we are currently limited by the internal phase aberrations of SPHERE. In spectroscopy, we obtain a gain of ~1 mag in a limited range of angular separations. Simulations show that although the main limitation comes from phase errors, the performance in the non-SLLC case is very close to the ultimate limit of the LSS mode. Finally, we obtain the very first on-sky data with the SLLC, which appear extremely promising for the future scientific exploitation of an apodized LSS mode in SPHERE.

astro-ph.IM↗

arXiv2014

Compensation of high-order quasi-static aberrations on SPHERE with the coronagraphic phase diversity (COFFEE)

The second-generation instrument SPHERE, dedicated to high-contrast imaging, will soon be in operation on the European Very Large Telescope. Such an instrument relies on an extreme adaptive optics system coupled with a coronagraph that suppresses most of the diffracted stellar light. However, the coronagraph performance is strongly limited by quasi-static aberrations that create long-lived speckles in the scientific image plane, which can easily be mistaken for planets. The ultimate performance is thus limited by the unavoidable differential aberrations between the wave-front sensor and the scientific camera, which have to be estimated andcompensated for. In this paper, we use the COFFEE approach to measure and compensate for SPHERE's quasi-static aberrations. COFFEE (for COronagraphic Focal-plane wave-Front Estimation for Exoplanet detection), which consists in an extension of phase diversity to coronagraphic imaging, estimates the quasi-static aberrations, including the differential ones, using only two focal plane images recorded by the scientific camera. In this paper, we use coronagraphic images recorded from SPHERE's infrared detector IRDIS to estimate the aberrations upstream of the coronagraph, which are then compensated for using SPHERE's extreme adaptive optics loop SAXO. We first validate the ability of COFFEE to estimate high-order aberrations by estimating a calibrated influence function pattern introduced upstream of the coronagraph. We then use COFFEE in an original iterative compensation process to compensate for the estimated aberrations, leading to a contrast improvement by a factor that varies from 1.4 to 4.7 between 2l/D and 15l/D on IRDIS. The performance of the compensation process is also evaluated through simulations. An excellent match between experimental results and these simulations is found.

astro-ph.IM↗

arXiv2008

Diversity among other worlds: characterization of exoplanets by direct detection

The physical characterization of exoplanets will require to take spectra at several orbital positions. For that purpose, a direct imaging capability is necessary. Direct imaging requires an efficient stellar suppression mechanism, associated with an ultrasmooth telescope. We show that before future large space missions (interferometer, 4-8 m class coronograph, external occulter or Fresnel imager), direct imaging of giant planets and close-by super-Earth are at the cross-road of a high scientific interest and a reasonable feasibility. The scientific interest lies in the fact that super-Earths share common geophysical attributes with Earths. They already begin to be detected by radial velocity (RV) and, together with giant planets, they have a larger area than Earths, making them detectable with a 1.5-2 m class telescope in reflected light. We propose such a (space) telescope be a first step before large direct imaging missions.

astro-ph↗

arXiv2008

The Wide-field High-resolution Infrared TElescope (WHITE)

The Wide-field High-resolution Infrared TElescope (WHITE) will be dedicated in the first years of its life to carrying out a few (well focused in terms of science objectives and time) legacy surveys. WHITE would have an angular resolution of ~0.3'' homogeneous over ~0.7 sq. deg. in the wavelength range 1 - 5 um, which means that we will very efficiently use all the available observational time during night time and day time. Moreover, the deepest observations will be performed by summing up shorter individual frames. We will have a temporal information that can be used to study variable objects. The three key science objectives of WHITE are : 1) A complete survey of the Magellanic Clouds to make a complete census of young stellar objects in the clouds and in the bridge and to study their star formation history and the link with the Milky Way. The interaction of the two clouds with our Galaxy might the closest example of a minor merging event that could be the main driver of galaxy evolution in the last 5 Gyrs. 2) The building of the first sample of dusty supernovae at z<1.2 in the near infrared range (1-5 um) to constrain the equation of state from these obscured objects, study the formation of dust in galaxies and build the first high resolution sample of high redshift galaxies observed in their optical frame 3) A very wide weak lensing survey over that would allow to estimate the equation of state in a way that would favourably compete with space projects.

astro-ph↗

arXiv2006

Wide Field Astronomy at Dome C: two IR surveys complementary to SNAP

Surveys provide a wealth of data to the astronomical community that are used well after their completion. In this paper, we propose a project that would take the maximum benefit of Dome C in Antarctica by performing two surveys, in the wavelength range from 1-5 micron, complementary to SNAP space surveys. The first one over 1000 sq. deg. (1 KdF) for 4 years and the second one over 15 sq. deg (SNAP-IR) for the next 4 years at the same time as SNAP 0.35-1.7 microns survey. By using a Ground-Layer Adaptive Optics system, we would be able to recover, at the ice level and over at least half a degree in radius, the 300 mas angular resolution available above the 30-m high turbulent layer. Such a survey, combining a high angular resolution with high sensitivities in the NIR and MIR, should also play the role of a pre-survey for JWST and ALMA.

astro-ph↗

arXiv1995

Active vase mirrors warped by Zernike polynomials for Correcting off-axis aberrations of fixed primary mirrors. Part 2 - Optical testing and performance evaluation

We investigate the aspherization of an active mirror for correcting third and fifth-order aberrations. We use a stainless steel AISI 420 mirror with a controlled pressure load, two series of 12-punctual radial positions of force application distributed symmetrically in two concentric rings around the mirror. We obtain the wavefronts for Cv1, Sph3, Coma3, Astm3, Comatri, Astm5 aswell as those of the added wavefronts. Although this active prototype mirror has general uses, our goal is to compensate the aberrations of a liquid mirror observing at large angles from the zenith.

astro-ph↗