arXiv subjects

M. Hartl

Publications and source records attributed to M. Hartl.

At least 19 recordsLinked to original sources

arXiv2026

Exploring the presence of a fifth force at the Galactic Center

Aims: The presence of a Yukawa-like correction to Newtonian gravity is investigated at the Galactic Center, leading to a new upper limit for the intensity of such a correction. Methods: We perform a Markov Chain Monte Carlo analysis using the astrometric and spectroscopic data of star S$2$ collected at the Very Large Telescope by GRAVITY, NACO and SINFONI instruments, covering the period from $1992$ to $2022$. Results: The precision of the GRAVITY instrument allows us to derive the most stringent upper limit at the Galactic Center for the intensity of the Yukawa contribution ($\propto \, αe^{- λr}$) to be $|α| < 0.003$ for a scale length $λ= 3 \cdot 10^{13}\, \rm m\, (\sim 200 \, \rm AU)$. This improves by roughly one order of magnitude all estimates obtained in previous works.

astro-ph.GA↗

arXiv2025

Spatially resolved broad line region in a quasar at z=4: Dynamical black hole mass and prominent outflow

We present the first near-infrared interferometric data of a QSO at z=4. The K-band observations were performed with GRAVITY+ on the VLTI using all four UTs, detecting a differential phase signal that traces the spatially resolved kinematics for both the \hb\ and \hg\ lines in the broad line region. We fit the two lines simultaneously with an updated model that includes distinct rotating and conical outflowing components. For the best fit model, more than 80\% of the \hi\ line emission from the BLR originates in an outflow with a velocity up to $10^4$ km s$^{-1}$. This is oriented so that our line of sight is along an edge of the conical structure, which produces the prominent blue wing on the line profile. A combination of anisotropic line emission and mid-plane opacity lead to the single-sided phase signal. The model is able to qualitatively match both the outflowing \civ\ line profile and the systemic \oi\ fluorescent emission. The derived black hole mass of $8\times10^8$ M$_\odot$ is the highest redshift black hole mass measurement to date obtained directly from BLR dynamics. It is an order of magnitude lower than that inferred from various single epoch scaling relations, and implies that the accretion is highly super-Eddington. With reference to recent simulations, the data suggest that this QSO is emitting close to its radiative limit in a regime where strong outflows are expected around a polar conical region.

astro-ph.GA↗

arXiv2025

First Light for the GRAVITY+ Adaptive Optics: Extreme Adaptive Optics for the Very Large Telescope Interferometer

GRAVITY+ improves by orders of magnitude the sensitivity, sky-coverage and contrast of the Very Large Telescope Interferometer (VLTI). A central part of this project is the development of Gravity Plus Adaptive Optics (GPAO), a dedicated high-order and laser-guide star Adaptive Optics (AO) system for VLTI. GPAO consists of four state-of-the-art AO systems equipping all 8m-class Unit Telescopes (UTs) for the wavefront correction of the VLTI instruments. It offers both visible and infrared Natural Guide Star (NGS) and Laser Guide Star (LGS) operations. The paper presents the design, operations and performances of GPAO. We illustrate the improvement brought by GPAO with interferometric observations obtained during the commissioning of the NGS mode end-2024. These science results include the first optical interferometry observations of a redshift $z\sim4$ quasar, the spectroscopy of a cool brown-dwarf with magnitude $K\sim 21.0$, the first observations of a Class I young star with GRAVITY, and the first sub-micro arcsecond differential astrometry in the optical. Together with the entire GRAVITY+ project, the implementation of GPAO is a true paradigm shift for observing the optical Universe at very high angular resolution.

astro-ph.IM↗

arXiv2025

The gas streamer G1-2-3 in the Galactic Center

The black hole in the Galactic Center, Sgr A*, is prototypical for ultra-low-fed galactic nuclei. The discovery of a hand-full of gas clumps in the realm of a few Earth masses in its immediate vicinity provides a gas reservoir sufficient to power Sgr A*. In particular, the gas cloud G2 is of interest due to its extreme orbit, on which it passed at a pericenter distance of around 100 AU and notably lost kinetic energy during the fly-by due to the interaction with the black hole accretion flow. 13 years prior to G2, a resembling gas cloud called G1, passed Sgr A* on a similar orbit. The origin of G2 remained a topic of discussion, with models including a central (stellar) source still proposed as alternatives to pure gaseous clouds. Here, we report the orbit of a third gas clump moving again along (almost) the same orbital trace. Since the probability of finding three stars on close orbits is very small, this strongly argues against stellar-based source models. Instead, we show that the gas streamer G1-2-3 plausibly originates from the stellar wind of the massive binary star IRS16SW. This claim is substantiated by the fact that the small differences between the three orbits - the orientations of the orbital ellipses in their common plane as a function of time - are consistent with the orbital motion of IRS 16SW.

astro-ph.GA↗

arXiv2024

The cool brown dwarf Gliese 229 B is a close binary

Owing to their similarities with giant exoplanets, brown dwarf companions of stars provide insights into the fundamental processes of planet formation and evolution. From their orbits, several brown dwarf companions are found to be more massive than theoretical predictions given their luminosities and the ages of their host stars (e.g. Brandt et al. 2021, Cheetham et al. 2018, Li et al. 2023). Either the theory is incomplete or these objects are not single entities. For example, they could be two brown dwarfs each with a lower mass and intrinsic luminosity (Brandt et al. 2021, Howe et al. 2024). The most problematic example is Gliese 229 B (Nakajima et al. 1995, Oppenheimer et al. 1995), which is at least 2-6 times less luminous than model predictions given its dynamical mass of $71.4\pm0.6$ Jupiter masses ($M_{\rm Jup}$) (Brandt et al. 2021). We observed Gliese 229 B with the GRAVITY interferometer and, separately, the CRIRES+ spectrograph at the Very Large Telescope. Both sets of observations independently resolve Gliese 229 B into two components, Gliese 229 Ba and Bb, settling the conflict between theory and observations. The two objects have a flux ratio of $0.47\pm0.03$ at a wavelength of 2 $μ$m and masses of $38.1\pm1.0$ and $34.4\pm1.5$ $M_{\rm Jup}$, respectively. They orbit each other every 12.1 days with a semimajor axis of 0.042 astronomical units (AU). The discovery of Gliese 229 BaBb, each only a few times more massive than the most massive planets, and separated by 16 times the Earth-moon distance, raises new questions about the formation and prevalence of tight binary brown dwarfs around stars.

astro-ph.SR↗

arXiv2024

The MICADO first light imager for the ELT: off-axis performance of PSF reconstruction

The highest scientific return, for adaptive optics (AO) observations, is achieved with a reliable reconstruction of the PSF. This is especially true for MICADO@ELT. In this presentation, we will focus on extending the MICADO PSF reconstruction (PSF-R) method to the off-axis case. Specifically, a novel approach based on temporal-based tomography of AO telemetry data has been recently implemented. Results from the PSF-R of both simulated and real data show that, at half isoplanatic angle distances, a precision of about 10-15% is achievable in both Strehl ratio and full-width at half maximum, paving the way to extend the MICADO PSF-R tool also to the multi-conjugated AO case.

astro-ph.IM↗

arXiv2024

GRAVITY+ Wavefront Sensors: High-Contrast, Laser Guide Star, Adaptive Optics systems for the VLTI

We present the Wavefront Sensor units of the Gravity Plus Adaptive Optics (GPAO) system, which will equip all 8m class telescopes of the VLTI and is an instrumental part of the GRAVITY+ project. It includes two modules for each Wavefront Sensor unit: a Natural Guide Star sensor with high-order 40x40 Shack-Hartmann and a Laser Guide Star 30x30 sensor. The state-of-the-art AO correction will considerably improve the performance for interferometry, in particular high-contrast observations for NGS observations and all-sky coverage with LGS, which will be implemented for the first time on VLTI instruments. In the following, we give an overview of the Wavefront Sensor units system after completion of their integration and characterization.

astro-ph.IM↗

arXiv2024

HighNESS Conceptual Design Report: Volume I

The European Spallation Source, currently under construction in Lund, Sweden, is a multidisciplinary international laboratory. Once completed to full specifications, it will operate the world's most powerful pulsed neutron source. Supported by a 3 million Euro Research and Innovation Action within the EU Horizon 2020 program, a design study (HighNESS) has been completed to develop a second neutron source located below the spallation target. Compared to the first source, designed for high cold and thermal brightness, the new source has been optimized to deliver higher intensity, and a shift to longer wavelengths in the spectral regions of cold (CN, 2--20\,Å), very cold (VCN, 10--120\,Å), and ultracold (UCN, ${>}\,{500}$\,Å) neutrons. The second source comprises a large liquid deuterium moderator designed to produce CN and support secondary VCN and UCN sources. Various options have been explored in the proposed designs, aiming for world-leading performance in neutronics. These designs will enable the development of several new instrument concepts and facilitate the implementation of a high-sensitivity neutron-antineutron oscillation experiment (NNBAR). This document serves as the Conceptual Design Report for the HighNESS project, representing its final deliverable.

physics.ins-det↗

arXiv2024

Astrometric detection of a Neptune-mass candidate planet in the nearest M-dwarf binary system GJ65 with VLTI/GRAVITY

The detection of low-mass planets orbiting the nearest stars is a central stake of exoplanetary science, as they can be directly characterized much more easily than their distant counterparts. Here, we present the results of our long-term astrometric observations of the nearest binary M-dwarf Gliese 65 AB (GJ65), located at a distance of only 2.67 pc. We monitored the relative astrometry of the two components from 2016 to 2023 with the VLTI/GRAVITY interferometric instrument. We derived highly accurate orbital parameters for the stellar system, along with the dynamical masses of the two red dwarfs. The GRAVITY measurements exhibit a mean accuracy per epoch of 50-60 microarcseconds in 1.5h of observing time using the 1.8m Auxiliary Telescopes. The residuals of the two-body orbital fit enable us to search for the presence of companions orbiting one of the two stars (S-type orbit) through the reflex motion they imprint on the differential A-B astrometry. We detected a Neptune-mass candidate companion with an orbital period of p = 156 +/- 1 d and a mass of m = 36 +/- 7 Mearth. The best-fit orbit is within the dynamical stability region of the stellar pair. It has a low eccentricity, e = 0.1 - 0.3, and the planetary orbit plane has a moderate-to-high inclination of i > 30° with respect to the stellar pair, with further observations required to confirm these values. These observations demonstrate the capability of interferometric astrometry to reach microarcsecond accuracy in the narrow-angle regime for planet detection by reflex motion from the ground. This capability offers new perspectives and potential synergies with Gaia in the pursuit of low-mass exoplanets in the solar neighborhood.

astro-ph.EP↗

arXiv2024

A dynamical measure of the black hole mass in a quasar 11 billion years ago

Tight relationships exist in the local universe between the central stellar properties of galaxies and the mass of their supermassive black hole. These suggest galaxies and black holes co-evolve, with the main regulation mechanism being energetic feedback from accretion onto the black hole during its quasar phase. A crucial question is how the relationship between black holes and galaxies evolves with time; a key epoch to probe this relationship is at the peaks of star formation and black hole growth 8-12 billion years ago (redshifts 1-3). Here we report a dynamical measurement of the mass of the black hole in a luminous quasar at a redshift of 2, with a look back time of 11 billion years, by spatially resolving the broad line region. We detect a 40 micro-arcsecond (0.31 pc) spatial offset between the red and blue photocenters of the H$α$ line that traces the velocity gradient of a rotating broad line region. The flux and differential phase spectra are well reproduced by a thick, moderately inclined disk of gas clouds within the sphere of influence of a central black hole with a mass of 3.2x10$^{8}$ solar masses. Molecular gas data reveal a dynamical mass for the host galaxy of 6x10$^{11}$ solar masses, which indicates an under-massive black hole accreting at a super-Eddington rate. This suggests a host galaxy that grew faster than the supermassive black hole, indicating a delay between galaxy and black hole formation for some systems.

astro-ph.GA↗

arXiv2023

Polarization analysis of the VLTI and GRAVITY

The goal of this work is to characterize the polarization effects of the VLTI and GRAVITY. This is needed to calibrate polarimetric observations with GRAVITY for instrumental effects and to understand the systematic error introduced to the astrometry due to birefringence when observing targets with a significant intrinsic polarization. By combining a model of the VLTI light path and its mirrors and dedicated experimental data, we construct a full polarization model of the VLTI UTs and the GRAVITY instrument. We first characterize all telescopes together to construct a UT calibration model for polarized targets. We then expand the model to include the differential birefringence. With this, we can constrain the systematic errors for highly polarized targets. Together with this paper, we publish a standalone Python package to calibrate the instrumental effects on polarimetric observations. This enables the community to use GRAVITY to observe targets in a polarimetric observing mode. We demonstrate the calibration model with the galactic center star IRS 16C. For this source, we can constrain the polarization degree to within 0.4 % and the polarization angle within 5 deg while being consistent with the literature. Furthermore, we show that there is no significant contrast loss, even if the science and fringe-tracker targets have significantly different polarization, and we determine that the phase error in such an observation is smaller than 1 deg, corresponding to an astrometric error of 10 μas. With this work, we enable the use of the polarimetric mode with GRAVITY/UTs and outline the steps necessary to observe and calibrate polarized targets. We demonstrate that it is possible to measure the intrinsic polarization of astrophysical sources with high precision and that polarization effects do not limit astrometric observations of polarized targets.

astro-ph.IM↗

arXiv2023

Polarimetry and Astrometry of NIR Flares as Event Horizon Scale, Dynamical Probes for the Mass of Sgr A*

We present new astrometric and polarimetric observations of flares from Sgr A* obtained with GRAVITY, the near-infrared interferometer at ESO's Very Large Telescope Interferometer (VLTI), bringing the total sample of well-covered astrometric flares to four and polarimetric ones to six, where we have for two flares good coverage in both domains. All astrometric flares show clockwise motion in the plane of the sky with a period of around an hour, and the polarization vector rotates by one full loop in the same time. Given the apparent similarities of the flares, we present a common fit, taking into account the absence of strong Doppler boosting peaks in the light curves and the EHT-measured geometry. Our results are consistent with and significantly strengthen our model from 2018: We find that a) the combination of polarization period and measured flare radius of around nine gravitational radii ($9 R_g \approx 1.5 R_{ISCO}$, innermost stable circular orbit) is consistent with Keplerian orbital motion of hot spots in the innermost accretion zone. The mass inside the flares' radius is consistent with the $4.297 \times 10^6 \; \text{M}_\odot$ measured from stellar orbits at several thousand $R_g$. This finding and the diameter of the millimeter shadow of Sgr A* thus support a single black hole model. Further, b) the magnetic field configuration is predominantly poloidal (vertical), and the flares' orbital plane has a moderate inclination with respect to the plane of the sky, as shown by the non-detection of Doppler-boosting and the fact that we observe one polarization loop per astrometric loop. Moreover, c) both the position angle on sky and the required magnetic field strength suggest that the accretion flow is fueled and controlled by the winds of the massive, young stars of the clockwise stellar disk 1-5 arcsec from Sgr A*, in agreement with recent simulations.

astro-ph.GA↗

arXiv2023

The Enhanced Resolution Imager and Spectrograph for the VLT

ERIS, the Enhanced Resolution Imager and Spectrograph, is an instrument that both extends and enhances the fundamental diffraction limited imaging and spectroscopy capability for the VLT. It replaces two instruments that were being maintained beyond their operational lifetimes, combines their functionality on a single focus, provides a new wavefront sensing module for natural and laser guide stars that makes use of the Adaptive Optics Facility, and considerably improves on their performance. The observational modes ERIS provides are integral field spectroscopy at 1-2.5 μm, imaging at 1-5 μm with several options for high contrast imaging, and longslit spectroscopy at 3-4 μm, The instrument is installed at the Cassegrain focus of UT4 at the VLT and, following its commissioning during 2022, has been made available to the community.

astro-ph.IM↗

arXiv2022

GRAVITY+ Wide: Towards hundreds of z $\sim$ 2 AGN

As part of the GRAVITY$^{+}$ project, the near-infrared beam combiner GRAVITY and the VLTI are currently undergoing a series of significant upgrades to further improve the performance and sky coverage. The instrumental changes will be transformational, and for instance uniquely position GRAVITY to observe the broad line region of hundreds of Active Galactic Nuclei (AGN) at a redshift of two and higher. The increased sky coverage is achieved by enlarging the maximum angular separation between the celestial science object (SC) and the off-axis fringe tracking (FT) star from currently 2 arcseconds (arcsec) up to unprecedented 30 arcsec, limited by the atmospheric conditions. This was successfully demonstrated at the VLTI for the first time.

astro-ph.IM↗

arXiv2022

GRAVITY faint: reducing noise sources in GRAVITY$^+$ with a fast metrology attenuation system

With the upgrade from GRAVITY to GRAVITY$^+$ the instrument will evolve into an all-sky interferometer that can observe faint targets, such as high redshift AGN. Observing the faintest targets requires reducing the noise sources in GRAVITY as much as possible. The dominant noise source, especially in the blue part of the spectrum, is the backscattering of the metrology laser light onto the detector. To reduce this noise we introduce two new metrology modes. With a combination of small hardware changes and software adaptations, we can dim the metrology laser during the observation without losing the phase referencing. For single beam targets, we can even turn off the metrology laser for the maximum SNR on the detector. These changes lead to an SNR improvement of over a factor of two averaged over the whole spectrum and up to a factor of eight in the part of the spectrum currently dominated by laser noise.

astro-ph.IM↗

arXiv2022

First Light for GRAVITY Wide: Large Separation Fringe Tracking for the Very Large Telescope Interferometer

GRAVITY+ is the upgrade of GRAVITY and the Very Large Telescope Interferometer (VLTI) with wide-separation fringe tracking, new adaptive optics, and laser guide stars on all four 8~m Unit Telescopes (UTs), for ever fainter, all-sky, high contrast, milliarcsecond interferometry. Here we present the design and first results of the first phase of GRAVITY+, called GRAVITY Wide. GRAVITY Wide combines the dual-beam capabilities of the VLTI and the GRAVITY instrument to increase the maximum separation between the science target and the reference star from 2 arcseconds with the 8 m UTs up to several 10 arcseconds, limited only by the Earth's turbulent atmosphere. This increases the sky-coverage of GRAVITY by two orders of magnitude, opening up milliarcsecond resolution observations of faint objects, and in particular the extragalactic sky. The first observations in 2019 - 2022 include first infrared interferometry of two redshift $z\sim2$ quasars, interferometric imaging on the binary system HD 105913A, and repeated observations of multiple star systems in the Orion Trapezium Cluster. We find the coherence loss between the science object and fringe-tracking reference star well described by the turbulence of the Earth's atmosphere. We confirm that the larger apertures of the UTs result in higher visibilities for a given separation due to larger overlap of the projected pupils on sky and give predictions for visibility loss as a function of separation to be used for future planning.

astro-ph.IM↗

arXiv2022

The MICADO Atmospheric Dispersion Corrector: Optomechanical design, expected performance and calibration techniques

The differential refraction of light passing through the atmosphere can have a severe impact on image quality if no atmospheric dispersion corrector (ADC) is used. For the Extremely Large Telescope (ELT) this holds true well into the infrared. MICADO, the near-infrared imaging camera for the ELT, will employ a cryogenic ADC consisting of two counter-rotating Amici prisms with diameters of 125 mm. The mechanism will reduce the atmospheric dispersion to below 2.5 milli arcseconds (mas), with a set goal of 1 mas. In this report, we provide an overview of the current status of the ADC in development for MICADO. We summarise the optomechanical design and discuss how the cryogenic environment impacts the performance. We will also discuss our plan to use a diffraction mask in the cold pupil to calibrate and validate the performance once the instrument is fully integrated.

astro-ph.IM↗

arXiv2021

Any Axion Insulator Must be a Bulk Three-Dimensional Topological Insulator

In recent attempts to observe axion electrodynamics, much effort has focused on trilayer heterostructures of magnetic topological insulators, and in particular on the examination of a so-called zero Hall plateau, which has misguidedly been overstated as direct evidence of an axion insulator state. We investigate the general notion of axion insulators, which by definition must contain a nontrivial volume to host the axion term. We conduct a detailed magneto-transport analysis of Chern insulators comprised of a single magnetic topological insulator layer of varying thickness as well as trilayer structures, for samples optimized to yield a perfectly quantized anomalous Hall effect. Our analysis gives evidence for a topological magneto-electric effect quantized in units of e$^2$/2h, allowing us to identify signatures of axion electrodynamics. Our observations may provide direct experimental access to electrodynamic properties of the universe beyond the traditional Maxwell equations, and challenge the hitherto proclaimed exclusive link between the observation of a zero Hall plateau and an axion insulator.

cond-mat.mes-hall↗