arXiv subjects

Marco Turchetti

Publications and source records attributed to Marco Turchetti.

11 recordsLinked to original sources

arXiv2025

Randomized benchmarking of a high-fidelity remote CNOT gate over a meter-scale microwave interconnect

High-fidelity, meter-scale microwave interconnects between superconducting quantum processor modules are a key technology for extending system size beyond constraints imposed by device manufacturing equipment, yield, and signal delivery. Although tomographic experiments have been used in previous demonstrations for benchmarking remote state transfer between modules, they do not reliably separate State Preparation and Measurement (SPAM) error from the error per state transfer. Recent developments based on randomized benchmarking provide a compatible theory for separating these two errors. In this work, we present a module-to-module interconnect based on Tunable-Coupling Qubits (TCQs) and benchmark, in a SPAM-error-tolerant manner enabled by a frame-tracking technique, a remote state transfer fidelity of 0.988 across a 60cm-long coplanar waveguide (CPW). The state transfer is implemented via a superadiabatic transitionless driving method, which suppresses intermediate excitation in the internal modes of the CPW. We further propose and construct a remote CNOT gate between modules, composed of local CZ gates in each module and remote state transfers, and report a gate fidelity of 0.933 using the randomized benchmarking method. The remote CNOT construction and benchmarking we present provide a way to fully characterize the module-to-module link operation and standardize reporting fidelity, analogous to randomized benchmarking protocols for other quantum gates.

quant-ph↗

arXiv2024

Mechanically-intermixed indium superconducting connections for microwave quantum interconnects

Superconducting coaxial cables represent critical communication channels for interconnecting superconducting quantum processors. Here, we report mechanically-intermixed indium joins to aluminum coaxial cables for low loss quantum interconnects. We describe an ABCD matrix formalism to characterize the total resonator internal quality factor ($Q_i$) and any contact ($R_{cont}$) or shunt resistance ($R_{shunt}$) associated with the mechanically-intermixed indium joins. We present four resonator test systems incorporating three indium join methods over the typical frequency range of interest (3-5.5GHz) at temperatures below $20mK$. We measure high internal quality factor aluminum cables ($Q_i = 1.55 \pm 0.37 x 10^6$) through a push-to-connect indium join of the outer conductor that capacitively couples the inner conductor for reflection measurements. We then characterize the total internal quality factors of modes of a cable resonator with a push-to-connect superconducting cable-splice at the midpoint to find mean $Q_i = 1.40 x 10^6$ and $Q_i = 9.39 x 10^5$ for even and odd-modes respectively and use an ABCD matrix model of the system to extract $R_{cont} = 6x10^{-4} \Omega$ for the indium join of the inner conductor. Finally, we demonstrate indium press-mold cable-to-chip connections where the cable-to-chip join is placed at a current node and voltage node through varying on-chip waveguide lengths with mean $Q_i = 1.24 x 10^6$ and $Q_i = 1.07 x 10^6$ respectively to extract $R_{cont} = 8.5x10^{-4} \Omega$ and $R_{shunt} = 1.3x10^7 \Omega$ for the interface. With these techniques, we demonstrate a set of low-loss methods to join superconducting cables for future quantum

quant-ph↗

arXiv2023

Lightwave-Electronic Harmonic Frequency Mixing

Electronic frequency mixers are fundamental building blocks of electronic systems. Harmonic frequency mixing in particular enables broadband electromagnetic signal analysis across octaves of spectrum using a single local oscillator. However, conventional harmonic frequency mixers do not operate beyond hundreds of GHz to a few THz. If extended to the petahertz scale in a compact and scalable form, harmonic mixers would enable field-resolved optical signal analysis spanning octaves of spectra in a monolithic device without the need for frequency conversion using nonlinear crystals. Here we demonstrate lightwave-electronic harmonic frequency mixing beyond 0.350 PHz using plasmonic nanoantennas. We demonstrate that the mixing process enables complete, field-resolved detection of spectral content far outside that of the local oscillator, greatly extending the range of detectable frequencies compared to conventional heterodyning techniques. Our work has important implications for applications where optical signals of interest exhibit coherent femtosecond-scale dynamics spanning multiple harmonics.

physics.optics↗

arXiv2022

Electron Emission Regimes of Planar Nano Vacuum Emitters

Recent advancements in nanofabrication have enabled the creation of vacuum electronic devices with nanoscale free space gaps. These nanoelectronic devices promise the benefits of cold-field emission and transport through free-space, such as high nonlinearity and relative insensitivity to temperature and ionizing radiation, all the while drastically reducing the footprint, increasing the operating bandwidth and reducing the power consumption of each device. Furthermore, planarized vacuum nanoelectronics could easily be integrated at scale similar to typical micro and nanoscale semiconductor electronics. However, the interplay between different electron emission mechanisms from these devices are not well understood, and inconsistencies with pure Fowler-Nordheim emission have been noted by others. In this work, we systematically study the current-voltage characteristics of planar vacuum nano-diodes having few-nanometer radii of curvature and free-space gaps between the emitter and collector. By investigating the current-voltage characteristics of nearly identical diodes fabricated from two different materials and under various environmental conditions, such as temperature and atmospheric pressure, we were able to clearly isolate three distinct emission regimes within a single device: Schottky, Fowler-Nordheim, and saturation. Our work will enable robust and accurate modeling of vacuum nanoelectronics which will be critical for future applications requiring high-speed and low-power electronics capable of operation in extreme conditions.

physics.app-ph↗

arXiv2021

Position-controlled functionalization of vacancies in silicon by single-ion implanted germanium atoms

Special point defects in semiconductors have been envisioned as suitable components for quantum-information technology. The identification of new deep centers in silicon that can be easily activated and controlled is a main target of the research in the field. Vacancy-related complexes are suitable to provide deep electronic levels but they are hard to control spatially. With the spirit of investigating solid state devices with intentional vacancy-related defects at controlled position, here we report on the functionalization of silicon vacancies by implanting Ge atoms through single-ion implantation, producing Ge-vacancy (GeV) complexes. We investigate the quantum transport through an array of GeV complexes in a silicon-based transistor. By exploiting a model based on an extended Hubbard Hamiltonian derived from ab-initio results we find anomalous activation energy values of the thermally activated conductance of both quasi-localized and delocalized many-body states, compared to conventional dopants. We identify such states, forming the upper Hubbard band, as responsible of the experimental sub-threshold transport across the transistor. The combination of our model with the single-ion implantation method enables future research for the engineering of GeV complexes towards the creation of spatially controllable individual defects in silicon for applications in quantum information technologies.

cond-mat.mtrl-sci↗

arXiv2020

Refractory doped titanium nitride nanoscale field emitters

Refractory materials exhibit high damage tolerance, which is attractive for the creation of nanoscale field-emission electronics and optoelectronics applications that require operation at high peak current densities and optical intensities. Recent results have demonstrated that the optical properties of titanium nitride, a refractory and CMOS-compatible plasmonic material, can be tuned by adding silicon and oxygen dopants. However, to fully leverage the potential of titanium (silicon oxy)nitride, a reliable and scalable fabrication process with few-nm precision is needed. In this work, we developed a fabrication process for producing engineered nanostructures with gaps between 10 and 15 nm, aspect ratios larger than 5 with almost 90{\deg} steep sidewalls. Using this process, we fabricated large-scale arrays of electrically-connected bow-tie nanoantennas with few-nm free-space gaps. We measured a typical variation of 4 nm in the average gap size. Using applied DC voltages and optical illumination, we tested the electronic and optoelectronic response of the devices, demonstrating sub-10-V tunneling operation across the free-space gaps, and quantum efficiency of up to 1E-3 at 1.2 {\mu}m, which is comparable to a bulk silicon photodiode at the same wavelength. Tests demonstrated that the titanium silicon oxynitride nanostructures did not significantly degrade, exhibiting less than 5 nm of shrinking of the average gap dimensions over few-{\mu}m^2 areas after roughly 6 hours of operation. Our results will be useful for developing the next generation of robust and CMOS-compatible nanoscale devices for high-speed and low-power field-emission electronics and optoelectronics applications.

physics.app-ph↗

arXiv2020

Impact of DC bias on Weak Optical-Field-Driven Electron Emission in Nano-Vacuum-Gap Detectors

In this work, we investigate multiphoton and optical-field tunneling emission from metallic surfaces with nanoscale vacuum gaps. Using time-dependent Schrodinger equation (TDSE) simulations, we find that the properties of the emitted photocurrent in such systems can be greatly altered by the application of only a few-volt DC bias. We find that when coupled with expected plasmonic enhancements within the nanometer-scale metallic gaps, the application of this DC bias significantly reduces the threshold for the transition to optical-field-driven tunneling from the metal surface, and could sufficiently enhance the emitted photocurrents, to make it feasible to electronically tag fJ ultrafast pulses at room temperature. Given the petahertz-scale instantaneous response of the photocurrents, and the low effective capacitance of thin-film nanoantenna devices that enables < 1 fs response time, detectors that exploit this bias-enhanced surface emission from nanoscale vacuum gaps could prove to be useful for communication, petahertz electronics, and ultrafast optical-field-resolved metrology.

physics.optics↗

arXiv2020

On-chip sampling of optical fields with attosecond resolution

Time-domain sampling of arbitrary electric fields with sub-cycle resolution enables a complete time-frequency analysis of a system's response to electromagnetic illumination. This provides access to dynamic information that is not provided by absorption spectra alone, and has recently been shown through measurements in the infrared that time-domain optical-field sampling offers significant improvements with regard to molecular sensitivity and limits of detection compared to traditional spectroscopic methods. Despite the many scientific and technological motivations, time-domain, optical-field sampling systems operating in the visible to near-infrared spectral regions are seldom accessible, requiring large driving pulse energies, and large laser amplifier systems, bulky apparatuses, and vacuum environments. Here, we demonstrate an all-on-chip, optoelectronic device capable of sampling arbitrary, low-energy, near-infrared waveforms under ambient conditions. Our solid-state integrated detector uses optical-field-driven electron emission from resonant nanoantennas to achieve petahertz-level switching speeds by generating on-chip attosecond electron bursts. These bursts are used to probe the electric field of weak optical transients. We demonstrated our devices by sampling the electric field of a ~5 fJ, broadband near-infrared ultrafast laser pulse using a ~50 pJ near-infrared driving pulse. Our sampling measurements recovered the weak optical transient as well as localized plasmonic dynamics of the emitting nanoantennas $in~situ$. This field-sampling device--with its compact footprint and low pulse-energy requirements--offers opportunities in a variety of applications, including: broadband time-domain spectroscopy in the molecular fingerprint region, time-domain analysis of nonlinear phenomena, and detailed studies of strong-field light-matter interactions.

physics.optics↗

arXiv2019

Light Phase Detection with On-Chip Petahertz Electronic Networks

Ultrafast light-matter interactions lead to optical-field-driven photocurrents with an attosecond-level temporal response. These photocurrents can be used to detect the carrier-envelope-phase (CEP) of short optical pulses, and could be utilized to create optical-frequency, petahertz (PHz) electronics for information processing. Despite recent reports on optical-field-driven photocurrents in various nanoscale solid-state materials, little has been done in examining the large-scale integration of these devices. In this work, we demonstrate enhanced, on-chip CEP detection via optical-field-driven photocurrent in a monolithic array of electrically-connected plasmonic bow-tie nanoantennas that are contained within an area of hundreds of square microns. The technique is scalable and could potentially be used for shot-to-shot CEP tagging applications requiring orders of magnitude less pulse energy compared to alternative ionization-based techniques. Our results open new avenues for compact time-domain, on-chip CEP detection, and inform the development of integrated circuits for PHz electronics as well as integrated platforms for attosecond and strong-field science.

physics.optics↗

arXiv2019

Single-Photon Single-Flux Coupled Detectors

In this work, we present a novel device that is a combination of a superconducting nanowire single-photon detector and a superconducting multi-level memory. We show that these devices can be used to count the number of detections through single-photon to single-flux conversion. Electrical characterization of the memory properties demonstrates single-flux quantum (SFQ) separated states. Optical measurements using attenuated laser pulses with different mean photon number, pulse energies and repetition rates are shown to differentiate single-photon detection from other possible phenomena, such as multi-photon detection and thermal activation. Finally, different geometries and material stacks to improve device performance, as well as arraying methods are discussed.

physics.ins-det↗

arXiv2019

Calculating the Band Structure of 3C-SiC Using sp3d5s*+$\Delta$ Model

We report on a semi-empirical tight binding model for 3C-SiC including the effect of sp3d5s* orbitals and spin-orbital coupling. In this work, we illustrate in detail the method to develop such a model for semiconductors with zincblende structure, based on Slater-Koster integrals, and we explain the optimization method used to fit the experimental results with such a model. This method shows high accuracy for the evaluation of 3C-SiC band diagram both in terms of the experimental energy levels at high symmetry points and the effective masses.

physics.app-ph↗