arXiv subjects

Markku Juntti

Publications and source records attributed to Markku Juntti.

At least 37 records · Page 2Linked to original sources

arXiv2026

Knowledge Distillation for Lightweight Multimodal Sensing-Aided mmWave Beam Tracking

Beam training and prediction in real-world millimeter-wave (mmWave) communications systems are challenging due to rapidly time-varying channels and strong interference from surrounding objects. In this context, widely available sensors, such as cameras and radars, can capture rich environmental information, enabling efficient beam management. This paper proposes a knowledge-distillation (KD)-enabled learning framework for developing lightweight and low-complexity models for beam prediction and tracking using real-world camera and radar data from the DeepSense 6G dataset. Specifically, a powerful teacher network based on convolutional neural networks (CNNs) and gated recurrent units (GRUs) is first designed to predict current and future beams from historical sensor observations. Then, a compact student model is constructed and trained via KD to transfer the predictive capability of the teacher model to a lightweight architecture. Simulation results demonstrate that jointly leveraging radar and image modalities significantly outperforms single-modality approaches. Moreover, the proposed student model achieves over 96% Top-5 beam prediction accuracy while reducing computational complexity by more than 4 times and the number of parameters by over 27 times compared with the teacher model.

eess.SP↗

arXiv2026

Deep Reinforcement Learning-Based Dynamic Resource Allocation in Cell-Free Massive MIMO

In this paper, we consider power allocation and antenna activation of cell-free massive multiple-input multiple-output (CFmMIMO) systems. We first derive closed-form expressions for the system spectral efficiency (SE) and energy efficiency (EE) as functions of the power allocation coefficients and the number of active antennas at the access points (APs). Then, we aim to enhance the EE through jointly optimizing antenna activation and power control. This task leads to a non-convex and mixed-integer design problem with high-dimensional design variables. To address this, we propose a novel DRL-based framework, in which the agent learns to map large-scale fading coefficients to AP activation ratio, antenna coefficient, and power coefficient. These coefficients are then employed to determine the number of active antennas per AP and the power factors assigned to users based on closed-form expressions. By optimizing these parameters instead of directly controlling antenna selection and power allocation, the proposed method transforms the intractable optimization into a low-dimensional learning task. Our extensive simulations demonstrate the efficiency and scalability of the proposed scheme. Specifically, in a CFmMIMO system with 40 APs and 20 users, it achieves a 50% EE improvement and 3350 times run time reduction compared to the conventional sequential convex approximation method.

eess.SP↗

arXiv2026

Deep Reinforcement Learning for Hybrid RIS Assisted MIMO Communications

Hybrid reconfigurable intelligent surfaces (HRIS) enhance wireless systems by combining passive reflection with active signal amplification. However, jointly optimizing the transmit beamforming with the HRIS reflection and amplification coefficients to maximize spectral efficiency (SE) is a non-convex problem, and conventional iterative solutions are computationally intensive. To address this, we propose a deep reinforcement learning (DRL) framework that learns a direct mapping from channel state information to the near-optimal transmit beamforming and HRIS configurations. The DRL model is trained offline, after which it can compute the beamforming and HRIS configurations with low complexity and latency. Simulation results demonstrate that our DRL-based method achieves 95% of the SE obtained by the alternating optimization benchmark, while significantly lowering the computational complexity.

eess.SP↗

arXiv2026

Knowledge Distillation for Collaborative Learning in Distributed Communications and Sensing

The rise of sixth generation (6G) wireless networks promises to deliver ultra-reliable, low-latency, and energy-efficient communications, sensing, and computing. However, traditional centralized artificial intelligence (AI) paradigms are ill-suited to the decentralized, resource-constrained, and dynamic nature of 6G ecosystems. This paper explores knowledge distillation (KD) and collaborative learning as promising techniques that enable the efficient and scalable deployment of lightweight AI models across distributed communications and sensing (C&S) nodes. We begin by providing an overview of KD and highlight the key strengths that make it particularly effective in distributed scenarios characterized by device heterogeneity, task diversity, and constrained resources. We then examine its role in fostering collective intelligence through collaborative learning between the central and distributed nodes via various knowledge distilling and deployment strategies. Finally, we present a systematic numerical study demonstrating that KD-empowered collaborative learning can effectively support lightweight AI models for multi-modal sensing-assisted beam tracking applications with substantial performance gains and complexity reduction.

eess.SP↗

arXiv2026

Impact of Pointing Errors and Correlated Wall Blockages on Practical Grid-based Indoor Terahertz Communication Systems

Terahertz (THz) communications has emerged as a promising technology for future wireless systems due to its potential to support extremely high data rates. However, severe path loss, blockage effects, and sensitivity to beam misalignment pose major challenges to reliable indoor THz communications. In this paper, we investigate the coverage probability of downlink transmission in a three-dimensional (3D) indoor THz communication system under structured access point (AP) deployments, with a focus on square and hexagonal grid topologies. A tractable analytical framework is developed to jointly account for human blockages, correlated wall blockages across APs, beam training, and residual pointing error. Numerical results demonstrate that wall blockage correlation significantly reduces the association and coverage probabilities, and its impact cannot be neglected in system performance analysis. Compared with square grid AP deployments, hexagonal grids consistently achieve higher coverage by mitigating correlated wall blockage effects and reducing the distances between user equipments (UEs) and their associated APs. Furthermore, coverage performance is shown to strongly depend on the UE location, with noticeable degradation as the UE moves away from its nearest AP. Residual pointing error is found to introduce substantial coverage loss, especially for longer links. In addition, beam training analysis reveals a non-monotonic relationship between antenna array size and training overhead, highlighting an inherent tradeoff among antenna configuration, beamwidth selection, and beam training efficiency. These findings provide useful insights into the design and deployment of practical indoor THz communication systems.

cs.IT↗

arXiv2026

Knowledge Distillation for mmWave Beam Prediction Using Sub-6 GHz Channels

Beamforming in millimeter-wave (mmWave) high-mobility environments typically incurs substantial training overhead. While prior studies suggest that sub-6 GHz channels can be exploited to predict optimal mmWave beams, existing methods depend on large deep learning (DL) models with prohibitive computational and memory requirements. In this paper, we propose a computationally efficient framework for sub-6 GHz channel-mmWave beam mapping based on the knowledge distillation (KD) technique. We develop two compact student DL architectures based on individual and relational distillation strategies, which retain only a few hidden layers yet closely mimic the performance of large teacher DL models. Extensive simulations demonstrate that the proposed student models achieve the teacher's beam prediction accuracy and spectral efficiency while reducing trainable parameters and computational complexity by 99%.

eess.SP↗

arXiv2026

Impact of Pointing Error on Coverage Performance of 3D Indoor Terahertz Communication Systems

In this paper, we develop a tractable analytical framework for a three-dimensional (3D) indoor terahertz (THz) communication system to theoretically assess the impact of the pointing error on its coverage performance. Specifically, we model the locations of access points (APs) using a Poisson point process, human blockages as random cylinder processes, and wall blockages through a Boolean straight line process. A pointing error refers to beamforming gain and direction mismatch between the transmitter and receiver. We characterize it based on the inaccuracy of location estimate. We then analyze the impact of this pointing error on the received signal power and derive a tractable expression for the coverage probability, incorporating the multi-cluster fluctuating two-ray distribution to accurately model small-scale fading in THz communications. Aided by simulation results, we corroborate our analysis and demonstrate that the pointing error has a pronounced impact on the coverage probability. Specifically, we find that merely increasing the antenna array size is insufficient to improve the coverage probability and mitigate the detrimental impact of the pointing error, highlighting the necessity of advanced estimation techniques in THz communication systems.

eess.SP↗

arXiv2026

Attention-Enhanced Learning for Sensing-Assisted Long-Term Beam Tracking in mmWave Communications

Beam training and prediction in millimeter-wave communications are highly challenging due to fast time-varying channels and sensitivity to blockages and mobility. In this context, infrastructure-mounted cameras can capture rich environmental information that can facilitate beam tracking design. In this work, we develop an efficient attention-enhanced machine learning model for long-term beam tracking built upon convolutional neural networks and gated recurrent units to predict both current and future beams from past observed images. The integrated temporal attention mechanism substantially improves its predictive performance. Numerical results demonstrate that the proposed design achieves Top-5 beam prediction accuracies exceeding 90% across both current and six future time slots, significantly reducing overhead arising from sensing and processing for beam training. It further attains 97% of state-of-the-art performance with only 3% of the computational complexity.

eess.SP↗

arXiv2026

Tri-Hybrid Beamforming Design for integrated Sensing and Communications

Tri-hybrid beamforming architectures have been proposed to enable energy-efficient communications systems in extra-largescale antenna arrays using low-cost programmable metasurface antennas. We study the tri-hybrid beamforming design for integrated sensing and communications (ISAC) to improve both communications and sensing performances. Specifically, we formulate a multi-objective optimization problem that balances communications signal-to-noise ratio (SNR) and the sensing power at a target direction, subject to constraints on the total power consumption and physical limitations inherent to the trihybrid beamforming architecture. We develop an efficient iterative algorithm in which the variables are updated in a closed form at each iteration, leading to a low-complexity and fast-execution design. Numerical results show that the tri-hybrid architecture improves spatial gain and energy efficiency, though with reduced beam alignment capability compared to conventional hybrid beamforming architectures.

cs.IT↗

arXiv2025

Exploring the Near and Far-Field Coexistence for RIS-Assisted ISAC Systems: An Adaptive Bandwidth Splitting Approach

Integrated sensing and communication (ISAC) enables the joint use of spectrum and hardware resources for radar sensing and data transmission, serving as a key enabler of next-generation wireless networks. However, most existing ISAC studies have been limited to operation within a single frequency band and have not been designed to adapt to diverse wireless propagation environments or user configurations. To address these limitations, this paper investigates a reconfigurable intelligent surface (RIS)-assisted ISAC system employing an adaptive bandwidth-splitting strategy under near-field (NF) and far-field (FF) coexistence. The system comprises a full-duplex access point (AP), an RIS and multiple users, where an ISAC user (IU) is both a sensing target and a communication user in the NF region, while communication-only users (CUs) rely on the RIS and experience either NF or FF propagation depending on their placement. The proposed system jointly exploits traditional sensing-only (SO) and ISAC bands and adopts uplink non-orthogonal multiple access (NOMA) for simultaneous transmission. We formulate a joint optimization problem for the receive beamforming vector, bandwidth-splitting ratio, and RIS phase shifts to minimize the Cramer-Rao bound (CRB) under rate and resource constraints. An efficient algorithm is developed based on an alternating optimization (AO) framework combined with semi-definite relaxation (SDR). Numerical results demonstrate that the proposed approach significantly outperforms conventional schemes that operate solely in either the ISAC or SO band, achieving superior performance across various RIS and user configurations under hybrid NF and FF coexistence scenarios.

eess.SP↗

arXiv2025

AoI-Aware Machine Learning for Constrained Multimodal Sensing-Aided Communications

Using environmental sensory data can enhance communications beam training and reduce its overhead compared to conventional methods. However, the availability of fresh sensory data during inference may be limited due to sensing constraints or sensor failures, necessitating a realistic model for multimodal sensing. This paper proposes a joint multimodal sensing and beam prediction framework that operates under a constraint on the average sensing rate, i.e., how often fresh sensory data should be obtained. The proposed method combines deep reinforcement learning, i.e., a deep Q-network (DQN), with a neural network (NN)-based beam predictor. The DQN determines the sensing decisions, while the NN predicts the best beam from the codebook. To capture the effect of limited fresh data during inference, the age of information (AoI) is incorporated into the training of both the DQN and the beam predictor. Lyapunov optimization is employed to design a reward function that enforces the average sensing constraint. Simulation results on a real-world dataset show that AoI-aware training improves top-1 and top-3 inference accuracy by 44.16% and 52.96%, respectively, under a strict sensing constraint. The performance gain, however, diminishes as the sensing constraint is relaxed.

eess.SP↗

arXiv2025

Deep Reinforcement Learning for Dynamic Sensing and Communications

Environmental sensing can significantly enhance mmWave communications by assisting beam training, yet its benefits must be balanced against the associated sensing costs. To this end, we propose a unified machine learning framework that dynamically determines when to sense and leverages sensory data for beam prediction. Specifically, we formulate a joint sensing and beamforming problem that maximizes the average signal-to-noise ratio under an average sensing budget. Lyapunov optimization is employed to enforce the sensing constraint, while a deep Q-Network determines the sensing slots. A pretrained deep neural network then maps the sensing data to optimal beams in the codebook. Simulations based on the real-world DeepSense dataset demonstrate that the proposed approach substantially reduces sensing overhead while maintaining satisfactory communications performance.

eess.SP↗

arXiv2025

6G Resilience -- White Paper

6G must be designed to withstand, adapt to, and evolve amid prolonged, complex disruptions. Mobile networks' shift from efficiency-first to sustainability-aware has motivated this white paper to assert that resilience is a primary design goal, alongside sustainability and efficiency, encompassing technology, architecture, and economics. We promote resilience by analysing dependencies between mobile networks and other critical systems, such as energy, transport, and emergency services, and illustrate how cascading failures spread through infrastructures. We formalise resilience using the 3R framework: reliability, robustness, resilience. Subsequently, we translate this into measurable capabilities: graceful degradation, situational awareness, rapid reconfiguration, and learning-driven improvement and recovery. Architecturally, we promote edge-native and locality-aware designs, open interfaces, and programmability to enable islanded operations, fallback modes, and multi-layer diversity (radio, compute, energy, timing). Key enablers include AI-native control loops with verifiable behaviour, zero-trust security rooted in hardware and supply-chain integrity, and networking techniques that prioritise critical traffic, time-sensitive flows, and inter-domain coordination. Resilience also has a techno-economic aspect: open platforms and high-quality complementors generate ecosystem externalities that enhance resilience while opening new markets. We identify nine business-model groups and several patterns aligned with the 3R objectives, and we outline governance and standardisation. This white paper serves as an initial step and catalyst for 6G resilience. It aims to inspire researchers, professionals, government officials, and the public, providing them with the essential components to understand and shape the development of 6G resilience.

eess.SP↗

arXiv2025

Positioning via Probabilistic Graphical Models in RIS-Aided Systems with Channel Estimation Errors

We propose a 6D Bayesian-based localization framework to estimate the position and rotation angles of a mobile station (MS) within an indoor reconfigurable intelligent surface (RIS)-aided system. This framework relies on a probabilistic graphical model to represent the joint probability distribution of random variables through their conditional dependencies and employs the No-U-Turn Sampler (NUTS) to approximate the posterior distribution based on the estimated channel parameters. Our framework estimates both the position and rotation of the mobile station (MS), in the presence of channel parameter estimation errors. We derive the Cramer-Rao lower bound (CRLB) for the proposed scenario and use it to evaluate the system's position error bound (PEB) and rotation error bound (REB). We compare the system performances with and without RIS. The results demonstrate that the RIS can enhance positioning accuracy significantly.

eess.SP↗

arXiv2025

Low Complexity Artificial Noise Aided Beam Focusing Design in Near-Field Terahertz Communications

In this paper, we develop a novel low-complexity artificial noise (AN) aided beam focusing scheme in a near-field terahertz wiretap communication system. In this system, the base station (BS) equipped with a large-scale array transmits signals to a legitimate user, while mitigating information leakage to an eavesdropper. We formulate an optimization problem to maximize the secrecy rate achieved at the legitimate user and solve it by designing the optimal beam focusing and power allocation. Numerical results demonstrate the significant performance improvement achieved by the proposed AN aided beam focusing scheme, especially when the eavesdropper is located closer to the BS than the legitimate user.

cs.IT↗

arXiv2025

Constrained Multimodal Sensing-Aided Communications: A Dynamic Beamforming Design

Using multimodal sensory data can enhance communications systems by reducing the overhead and latency in beam training. However, processing such data incurs high computational complexity, and continuous sensing results in significant power and bandwidth consumption. This gives rise to a tradeoff between the (multimodal) sensing data acquisition rate and communications performance. In this work, we develop a constrained multimodal sensing-aided communications framework where dynamic sensing and beamforming are performed under a sensing budget. Specifically, we formulate an optimization problem that maximizes the average received signal-to-noise ratio (SNR) of user equipment, subject to constraints on the average number of sensing actions and power budget. Using the Saleh-Valenzuela mmWave channel model, we construct the channel primarily based on position information obtained via multimodal sensing. Stricter sensing constraints reduce the availability of position data, leading to degraded channel estimation and thus lower performance. We apply Lyapunov optimization to solve the problem and derive a dynamic sensing and beamforming algorithm. Numerical evaluations on the DeepSense and Raymobtime datasets show that halving sensing times leads to only up to 7.7% loss in average SNR.

eess.SP↗

arXiv2025

Joint Beamforming Design and Bit Allocation in Massive MIMO with Resolution-Adaptive ADCs

Low-resolution analog-to-digital converters (ADCs) have emerged as a promising technology for reducing power consumption and complexity in massive multiple-input multiple-output (MIMO) systems while maintaining satisfactory spectral and energy efficiencies (SE/EE). In this work, we first identify the essential properties of optimal quantization and leverage them to derive a closed-form approximation of the covariance matrix of the quantization distortion. The theoretical finding facilitates the system SE analysis in the presence of low-resolution ADCs. We then focus on the joint optimization of the transmit-receive beamforming and bit allocation to maximize the SE under constraints on the transmit power and the total number of active ADC bits. To solve the resulting mixed-integer problem, we first develop an efficient beamforming design for fixed ADC resolutions. Then, we propose a low-complexity heuristic algorithm to iteratively optimize the ADC resolutions and beamforming matrices. Numerical results for a $64 \times 64$ MIMO system demonstrate that the proposed design offers $6\%$ improvement in both SE and EE with $40\%$ fewer active ADC bits compared with the uniform bit allocation. Furthermore, we numerically show that receiving more data streams with low-resolution ADCs can achieve higher SE and EE compared to receiving fewer data streams with high-resolution ADCs.

eess.SP↗

arXiv2025

Exploiting Symmetric Non-Convexity for Multi-Objective Symbol-Level DFRC Signal Design

Symbol-level precoding (SLP) is a promising solution for addressing the inherent interference problem in dual-functional radar-communication (DFRC) signal designs. This paper considers an SLP-DFRC signal design problem which optimizes the radar performance under communication performance constraints. We show that a common phase modulation applied to the transmit signals from an antenna array does not affect the performance of different radar sensing metrics, including beampattern similarity, signal-to-interference-plus-noise ratio (SINR), and Cramér-Rao lower bound (CRLB). We refer to this as symmetric-rotation invariance, upon which we develop low-complexity yet efficient DFRC signal design algorithms. More specifically, we propose a symmetric non-convexity (SNC)-based DFRC algorithm that relies on the non-convexity of the radar sensing metrics to identify a set of radar-only solutions. Based on these solutions, we further exploit the symmetry property of the radar sensing metrics to efficiently design the DFRC signal. We show that the proposed SNC-based algorithm is versatile in the sense that it can be applied to the DFRC signal optimization of all three sensing metrics mentioned above (beampattern, SINR, and CRLB). In addition, since the radar sensing metrics are independent of the communication channel and data symbols, the set of radar-only solutions can be constructed offline, thereby reducing the computational complexity. We also develop an accelerated SNC-based algorithm that further reduces the complexity. Finally, we numerically demonstrate the superiority of the proposed algorithms compared to existing methods in terms of sensing and communication performance as well as computational requirements.

eess.SP↗