arXiv subjects

Markku Juntti

Publications and source records attributed to Markku Juntti.

At least 73 records · Page 4Linked to original sources

arXiv2024

Performance of UAV-based Cell-free mMIMO ISAC Networks: Tethered vs. Mobile

The employment of unmanned aerial vehicles (UAVs) aligned with multistatic sensing in integrated sensing and communication (ISAC) systems can provide remarkable performance gains in sensing, by taking advantage of the cell-free massive multiple-input multiple-output (mMIMO) architecture. Under these considerations, in this paper, the achievable sensing signal-to-noise-plus-interference ratio (SINR) of a cell-free mMIMO ISAC UAV-based network is evaluated for two different deployments of UAVs, namely, mobile and tethered. In both scenarios, a transmit precoder that jointly optimizes the sensing and communication requirements subjected to power constraints is designed. Specifically, for the scenario with mobile UAVs, beyond the transmit precoding, we also optimize the position of the transmit UAVs through particle swarm optimization (PSO). The results show that, although tethered UAVs have a more efficient power allocation, the proposed position control algorithm for the mobile UAVs can achieve a superior gain in terms of sensing SINR.

eess.SP↗

arXiv2024

Terahertz Communications and Sensing for 6G and Beyond: A Comprehensive Review

Next-generation cellular technologies, commonly referred to as the 6G, are envisioned to support a higher system capacity, better performance, and network sensing capabilities. The THz band is one potential enabler to this end due to the large unused frequency bands and the high spatial resolution enabled by the short signal wavelength and large bandwidth. Different from earlier surveys, this paper presents a comprehensive treatment and technology survey on THz communications and sensing in terms of advantages, applications, propagation characterization, channel modeling, measurement campaigns, antennas, transceiver devices, beamforming, networking, the integration of communications and sensing, and experimental testbeds. Starting from the motivation and use cases, we survey the development and historical perspective of THz communications and sensing with the anticipated 6G requirements. We explore the radio propagation, channel modeling, and measurement for the THz band. The transceiver requirements, architectures, technological challenges, and state-of-the-art approaches to compensate for the high propagation losses, including appropriate antenna design and beamforming solutions. We overview several related technologies that either are required by or are beneficial for THz systems and networks. The synergistic design of sensing and communications is explored in depth. Practical trials, demonstrations, and experiments are also summarized. The paper gives a holistic view of the current state of the art and highlights the open research challenges towards 6G and beyond.

eess.SP↗

arXiv2024

Low-Complexity Near-Field Channel Estimation for Hybrid RIS Assisted Systems

We investigate the channel estimation (CE) problem for hybrid RIS assisted systems and focus on the near-field (NF) regime. Different from their far-field counterparts, NF channels possess a block-sparsity property, which is leveraged in the two developed CE algorithms: (i) boundary estimation and sub-vector recovery (BESVR) and (ii) linear total variation regularization (TVR). In addition, we adopt the alternating direction method of multipliers to reduce their computational complexity. Numerical results show that the linear TVR algorithm outperforms the chosen baseline schemes in terms of normalized mean square error in the high signal-to-noise ratio regime while the BESVR algorithm achieves comparable performance to the baseline schemes but with the added advantage of minimal CPU time.

eess.SP↗

arXiv2024

Characterization of Spatial-Temporal Channel Statistics from Indoor Measurement Data at D Band

Millimeter-wave (mmWave) and D Band (110--170~GHz) frequencies are poised to play a pivotal role in the advancement of sixth-generation (6G) systems and beyond, owing to their ability to enhance performance metrics such as capacity, ultra-low latency, and spectral efficiency. This paper concentrates on deriving statistical insights into power, delay, and the number of paths based on measurements conducted across four distinct locations at a center frequency of 143.1 GHz. The findings underscore the suitability of various distributions in characterizing power behavior in line-of-sight (LOS) scenarios, including lognormal, Nakagami, gamma, and beta distributions, whereas the loglogistic distribution gives the optimal fit for power distribution in non-line-of-sight (NLOS) scenarios. Moreover, the exponential distribution shows to be the most appropriate model for the delay distribution in both LOS and NLOS scenarios. In terms of the number of paths, observations indicate a tendency for the highest concentration within the 10 m to 30 m distance range between the transmitter (Tx) and receiver (Rx). These insights shed light on the statistical nature of D band propagation characteristics, which are vital for informing the design and optimization of future 6G communication systems

cs.IT↗

arXiv2023

On the Performance of LoRa Empowered Communication for Wireless Body Area Networks

To remotely monitor the physiological status of the human body, long range (LoRa) communication has been considered as an eminently suitable candidate for wireless body area networks (WBANs). Typically, a Rayleigh-lognormal fading channel is encountered by the LoRa links of the WBAN. In this context, we characterize the performance of the LoRa system in WBAN scenarios with an emphasis on the physical (PHY) layer and medium access control (MAC) layer in the face of Rayleigh-lognormal fading channels and the same spreading factor interference. Specifically, closed-form approximate bit error probability (BEP) expressions are derived for the LoRa system. The results show that increasing the SF and reducing the interference efficiently mitigate the shadowing effects. Moreover, in the quest for the most suitable MAC protocol for LoRa based WBANs, three MAC protocols are critically appraised, namely the pure ALOHA, slotted ALOHA, and carrier-sense multiple access. The coverage probability, energy efficiency, throughput, and system delay of the three MAC protocols are analyzed in Rayleigh-lognormal fading channel. Furthermore, the performance of the equal-interval-based and equal-area-based schemes is analyzed to guide the choice of the SF. Our simulation results confirm the accuracy of the mathematical analysis and provide some useful insights for the future design of LoRa based WBANs.

cs.IT↗

arXiv2023

A Novel Application of Polynomial Solvers in mmWave Analog Radio Beamforming

Beamforming is a signal processing technique where an array of antenna elements can be steered to transmit and receive radio signals in a specific direction. The usage of millimeter wave (mmWave) frequencies and multiple input multiple output (MIMO) beamforming are considered as the key innovations of 5th Generation (5G) and beyond communication systems. The technique initially performs a beam alignment procedure, followed by data transfer in the aligned directions between the transmitter and the receiver. Traditionally, beam alignment involves periodical and exhaustive beam sweeping at both transmitter and the receiver, which is a slow process causing extra communication overhead with MIMO and massive MIMO radio units. In applications such as beam tracking, angular velocity, beam steering etc., the beam alignment procedure is optimized by estimating the beam directions using first order polynomial approximations. Recent learning-based SOTA strategies for fast mmWave beam alignment also require exploration over exhaustive beam pairs during the training procedure, causing overhead to learning strategies for higher antenna configurations. In this work, we first optimize the beam alignment cost functions e.g. the data rate, to reduce the beam sweeping overhead by applying polynomial approximations of its partial derivatives which can then be solved as a system of polynomial equations using well-known tools from algebraic geometry. At this point, a question arises: 'what is a good polynomial approximation?' In this work, we attempt to obtain a 'good polynomial approximation'. Preliminary experiments indicate that our estimated polynomial approximations attain a so-called sweet-spot in terms of the solver speed and accuracy, when evaluated on test beamforming problems.

cs.SC↗

arXiv2023

Device Detection and Channel Estimation in MTC with Correlated Activity Pattern

This paper provides a solution for the activity detection and channel estimation problem in grant-free access with correlated device activity patterns. In particular, we consider a machine-type communications (MTC) network operating in event-triggered traffic mode, where the devices are distributed over clusters with an activity behaviour that exhibits both intra-cluster and inner-cluster sparsity patterns. Furthermore, to model the network's intra-cluster and inner-cluster sparsity, we propose a structured sparsity-inducing spike-and-slab prior which provides a flexible approach to encode the prior information about the correlated sparse activity pattern. Furthermore, we drive a Bayesian inference scheme based on the expectation propagation (EP) framework to solve the JUICE problem. Numerical results highlight the significant gains obtained by the proposed structured sparsity-inducing spike-and-slab prior in terms of both user identification accuracy and channel estimation performance.

eess.SP↗

arXiv2023

Hierarchical MTC User Activity Detection and Channel Estimation with Unknown Spatial Covariance

This paper addresses the joint user identification and channel estimation (JUICE) problem in machine-type communications under the practical spatially correlated channels model with unknown covariance matrices. Furthermore, we consider an MTC network with hierarchical user activity patterns following an event-triggered traffic mode. Therein the users are distributed over clusters with a structured sporadic activity behaviour that exhibits both cluster-level and intra-cluster sparsity patterns. To solve the JUICE problem, we first leverage the concept of strong priors and propose a hierarchical-sparsity-inducing spike-and-slab prior to model the structured sparse activity pattern. Subsequently, we derive a Bayesian inference scheme by coupling the expectation propagation (EP) algorithm with the expectation maximization (EM) framework. Second, we reformulate the JUICE as a maximum a posteriori (MAP) estimation problem and propose a computationally-efficient solution based on the alternating direction method of multipliers (ADMM). More precisely, we relax the strong spike-and-slab prior with a cluster-sparsity-promoting prior based on the long-sum penalty. We then derive an ADMM algorithm that solves the MAP problem through a sequence of closed-form updates. Numerical results highlight the significant performance significant gains obtained by the proposed algorithms, as well as their robustness against various assumptions on the users sparse activity behaviour.

eess.SP↗

arXiv2023

A Max-Min Task Offloading Algorithm for Mobile Edge Computing Using Non-Orthogonal Multiple Access

To mitigate computational power gap between the network core and edges, mobile edge computing (MEC) is poised to play a fundamental role in future generations of wireless networks. In this letter, we consider a non-orthogonal multiple access (NOMA) transmission model to maximize the worst task to be offloaded among all users to the network edge server. A provably convergent and efficient algorithm is developed to solve the considered non-convex optimization problem for maximizing the minimum number of offloaded bits in a multi-user NOMAMEC system. Compared to the approach of optimized orthogonal multiple access (OMA), for given MEC delay, power and energy limits, the NOMA-based system considerably outperforms its OMA-based counterpart in MEC settings. Numerical results demonstrate that the proposed algorithm for NOMA-based MEC is particularly useful for delay sensitive applications.

cs.IT↗

arXiv2023

Multi-Static ISAC in Cell-Free Massive MIMO: Precoder Design and Privacy Assessment

A multi-static sensing-centric integrated sensing and communication (ISAC) network can take advantage of the cell-free massive multiple-input multiple-output infrastructure to achieve remarkable diversity gains and reduced power consumption. While the conciliation of sensing and communication requirements is still a challenge, the privacy of the sensing information is a growing concern that should be seriously taken on the design of these systems to prevent other attacks. This paper tackles this issue by assessing the probability of an internal adversary to infer the target location information from the received signal by considering the design of transmit precoders that jointly optimizes the sensing and communication requirements in a multi-static-based cell-free ISAC network. Our results show that the multi-static setting facilitates a more precise estimation of the location of the target than the mono-static implementation.

eess.SP↗

arXiv2023

Fairness Enhancement of UAV Systems with Hybrid Active-Passive RIS

We consider unmanned aerial vehicle (UAV)-enabled wireless systems where downlink communications between a multi-antenna UAV and multiple users are assisted by a hybrid active-passive reconfigurable intelligent surface (RIS). We aim at a fairness design of two typical UAV-enabled networks, namely the static-UAV network where the UAV is deployed at a fixed location to serve all users at the same time, and the mobile-UAV network which employs the time division multiple access protocol. In both networks, our goal is to maximize the minimum rate among users through jointly optimizing the UAV's location/trajectory, transmit beamformer, and RIS coefficients. The resulting problems are highly nonconvex due to a strong coupling between the involved variables. We develop efficient algorithms based on block coordinate ascend and successive convex approximation to effectively solve these problems in an iterative manner. In particular, in the optimization of the mobile-UAV network, closed-form solutions to the transmit beamformer and RIS passive coefficients are derived. Numerical results show that a hybrid RIS equipped with only 4 active elements and a power budget of 0 dBm offers an improvement of 38%-63% in minimum rate, while that achieved by a passive RIS is only about 15%, with the same total number of elements.

cs.IT↗

arXiv2023

Multi UAV-enabled Distributed Sensing: Cooperation Orchestration and Detection Protocol

This paper proposes an unmanned aerial vehicle (UAV)-based distributed sensing framework that uses orthogonal frequency-division multiplexing (OFDM) waveforms to detect the position of a ground target, and UAVs operate in half-duplex mode. A spatial grid approach is proposed, where an specific area in the ground is divided into cells of equal size, then the radar cross-section (RCS) of each cell is jointly estimated by a network of dual-function UAVs. For this purpose, three estimation algorithms are proposed employing the maximum likelihood criterion, and digital beamforming is used for the local signal acquisition at the receive UAVs. It is also considered that the coordination, fusion of sensing data, and central estimation is performed at a certain UAV acting as a fusion center (FC). Monte Carlo simulations are performed to obtain the absolute estimation error of the proposed framework. The results show an improved accuracy and resolution by the proposed framework, if compared to a single monostatic UAV benchmark, due to the distributed approach among the UAVs. It is also evidenced that a reduced overhead is obtained when compared to a general compressive sensing (CS) approach.

eess.SP↗

arXiv2023

Joint Communications and Sensing Hybrid Beamforming Design via Deep Unfolding

Joint communications and sensing (JCAS) is envisioned as a key feature in future wireless communications networks. In massive MIMO-JCAS systems, hybrid beamforming (HBF) is typically employed to achieve satisfactory beamforming gains with reasonable hardware cost and power consumption. Due to the coupling of the analog and digital precoders in HBF and the dual objective in JCAS, JCAS-HBF design problems are very challenging and usually require highly complex algorithms. In this paper, we propose a fast HBF design for JCAS based on deep unfolding to optimize a tradeoff between the communications rate and sensing accuracy. We first derive closed-form expressions for the gradients of the communications and sensing objectives with respect to the precoders and demonstrate that the magnitudes of the gradients pertaining to the analog precoder are typically smaller than those associated with the digital precoder. Based on this observation, we propose a modified projected gradient ascent (PGA) method with significantly improved convergence. We then develop a deep unfolded PGA scheme that efficiently optimizes the communications-sensing performance tradeoff with fast convergence thanks to the well-trained hyperparameters. In doing so, we preserve the interpretability and flexibility of the optimizer while leveraging data to improve performance. Finally, our simulations demonstrate the potential of the proposed deep unfolded method, which achieves up to 33.5% higher communications sum rate and 2.5 dB lower beampattern error compared with the conventional design based on successive convex approximation and Riemannian manifold optimization. Furthermore, it attains up to a 65% reduction in run time and computational complexity with respect to the PGA procedure without unfolding.

cs.IT↗

arXiv2023

Deep Unfolding Enabled Constant Modulus Waveform Design for Joint Communications and Sensing

Joint communications and sensing (JCAS) systems have recently emerged as a promising technology to utilize the scarce spectrum in wireless networks and to reuse the same hardware to save infrastructure costs. In practical JCAS systems, dual functional constant-modulus waveforms can be employed to avoid signal distortion in nonlinear power amplifiers. However, the designs of such waveforms are very challenging due to the nonconvex constant-modulus constraint. The conventional branch-and-bound (BnB) method can achieve optimal solution but at the cost of exponential complexity and long run time. In this paper, we propose an efficient deep unfolding method for the constant-modulus waveform design in a multiuser multiple-input multiple-output (MIMO) JCAS system. The deep unfolding model has a sparsely-connected structure and is trained in an unsupervised fashion. It achieves good communications-sensing performance tradeoff while maintaining low computational complexity and low run time. Specifically, our numerical results show that the proposed deep unfolding scheme achieves a similar achievable rate compared to the conventional BnB method with 30 times faster execution time.

eess.SP↗

arXiv2023

Joint Communications and Sensing Design for Multi-Carrier MIMO Systems

In conventional joint communications and sensing (JCAS) designs for multi-carrier multiple-input multiple-output (MIMO) systems, the dual-functional waveforms are often optimized for the whole frequency band, resulting in limited communications--sensing performance tradeoff. To overcome the limitation, we propose employing a subset of subcarriers for JCAS, while the communications function is performed over all the subcarriers. This offers more degrees of freedom to enhance the communications performance under a given sensing accuracy. We first formulate the rate maximization under the sensing accuracy constraint to optimize the beamformers and JCAS subcarriers. The problem is solved via Riemannian manifold optimization and closed-form solutions. Numerical results for an 8x4 MIMO system with 64 subcarriers show that compared to the conventional subcarrier sharing scheme, the proposed scheme employing 16 JCAS subcarriers offers 60% improvement in the achievable communications rate at the signal-to-noise ratio of 10 dB. Meanwhile, this scheme generates the sensing beampattern with the same quality as the conventional JCAS design.

cs.IT↗

arXiv2023

Network-Aided Intelligent Traffic Steering in 6G O-RAN: A Multi-Layer Optimization Framework

To enable an intelligent, programmable and multi-vendor radio access network (RAN) for 6G networks, considerable efforts have been made in standardization and development of open RAN (O-RAN). So far, however, the applicability of O-RAN in controlling and optimizing RAN functions has not been widely investigated. In this paper, we jointly optimize the flow-split distribution, congestion control and scheduling (JFCS) to enable an intelligent traffic steering application in O-RAN. Combining tools from network utility maximization and stochastic optimization, we introduce a multi-layer optimization framework that provides fast convergence, long-term utility-optimality and significant delay reduction compared to the state-of-the-art and baseline RAN approaches. Our main contributions are three-fold: i) we propose the novel JFCS framework to efficiently and adaptively direct traffic to appropriate radio units; ii) we develop low-complexity algorithms based on the reinforcement learning, inner approximation and bisection search methods to effectively solve the JFCS problem in different time scales; and iii) the rigorous theoretical performance results are analyzed to show that there exists a scaling factor to improve the tradeoff between delay and utility-optimization. Collectively, the insights in this work will open the door towards fully automated networks with enhanced control and flexibility. Numerical results are provided to demonstrate the effectiveness of the proposed algorithms in terms of the convergence rate, long-term utility-optimality and delay reduction.

cs.LG↗

arXiv2023

Beam Squint Analysis and Mitigation via Hybrid Beamforming Design in THz Communications

We investigate the beam squint effect in uniform planar arrays (UPAs) and propose an efficient hybrid beamforming (HBF) design to mitigate the beam squint in multiple-input multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM) systems operating at terahertz band. We first analyze the array gain and derive the closed-form beam squint ratio that characterizes the severity of the beam squint effect on UPAs. The effect is shown to be more severe with a higher fractional bandwidth, while it can be significantly mitigated when the shape of a UPA approaches a square. We then focus on the HBF design that maximizes the system spectral efficiency. The design problem is challenging due to the frequency-flat nature and hardware constraints of the analog beamformer. We overcome the challenges by proposing an efficient decoupling design in which the digital and analog beamformers admit closed-form solutions, which facilitate practical implementations. Numerical results validate our analysis and show that the proposed HBF design is robust to beam squint, and thus, it outperforms the state-of-the-art methods in wideband massive MIMO systems.

cs.IT↗

arXiv2023

AI-Empowered Hybrid MIMO Beamforming

Hybrid multiple-input multiple-output (MIMO) is an attractive technology for realizing extreme massive MIMO systems envisioned for future wireless communications in a scalable and power-efficient manner. However, the fact that hybrid MIMO systems implement part of their beamforming in analog and part in digital makes the optimization of their beampattern notably more challenging compared with conventional fully digital MIMO. Consequently, recent years have witnessed a growing interest in using data-aided artificial intelligence (AI) tools for hybrid beamforming design. This article reviews candidate strategies to leverage data to improve real-time hybrid beamforming design. We discuss the architectural constraints and characterize the core challenges associated with hybrid beamforming optimization. We then present how these challenges are treated via conventional optimization, and identify different AI-aided design approaches. These can be roughly divided into purely data-driven deep learning models and different forms of deep unfolding techniques for combining AI with classical optimization.We provide a systematic comparative study between existing approaches including both numerical evaluations and qualitative measures. We conclude by presenting future research opportunities associated with the incorporation of AI in hybrid MIMO systems.

cs.IT↗