arXiv subjects

Max Charles

Publications and source records attributed to Max Charles.

6 recordsLinked to original sources

arXiv2026

A Candidate Innermost Fifth Planet In the HR 8799 System Revealed By JWST NIRISS Aperture Masking Interferometry

We detect a candidate fifth planet in the HR 8799 system, directly imaged with the JWST/NIRISS Aperture Masking Interferometer (AMI). The detected source lies just above a $3\sigma$ contrast curve at a contrast of $\sim2\times10^{-4}$ in the F380M filter at a projected separation of $\sim150$ mas, corresponding to a few-to-several Jupiter mass planet at an orbital radius of $\sim 7$au. The separation of the candidate is compatible with absolute proper-motion constraints from Gaia and Hipparcos assuming it is bound, while its orbital position lies near a stable orbital solution of a fifth planet in a 3:1 mean motion resonance with planet e. This detection was made possible by a new JWST/NIRISS AMI data pipeline that reaches the photon noise limited potential of AMI by accounting for the optical and electronic systematics that limited sensitivity in prior analyses. Confirmation of this candidate would make HR 8799 the first directly imaged five-planet system and provide insight into the orbital dynamics and the dynamical evolution of planetary systems with widely-separated gas giants.

astro-ph.EP↗

arXiv2026

Mitigating effects of telescope jitter through differentiable forward-modeling

Instabilities in telescope pointing, commonly referred to as jitter, introduce image degradation that can compromise the accuracy of critical scientific observables. This work presents a differentiable forward-modeling approach to both understand and mitigate the impact of jitter. We apply dLux -- a differentiable optical simulation framework built in the JAX numerical simulation framework -- to model the blurring effects of jitter on the final image. We categorize jitter into low-, medium-, and high-frequency regimes with respect to the camera frame rate and build simple jitter models based on its manifestation on the detector. The forward-model approach proves effective for low- and high-frequency regimes, but the inherent unpredictability of medium-frequency jitter may lead to model misspecification. As a test case we apply these models to the TOLIMAN mission, a forthcoming CubeSat telescope dedicated to detecting nearby Earth-analogue exoplanets through high-precision astrometry. Using Fisher information analysis, we quantify the effect of jitter on TOLIMAN's primary science observable -- the angular binary separation of the Alpha Centauri AB binary components. We find model misspecification does not introduce a systematic bias on the recovered binary separation except when fitting a one-dimensional jitter model to a two-dimensional motion, hence we recommend the use of a two-dimensional model. The forward-model approach offers a generalized method applicable to other telescope systems, including ongoing work with JWST's NIRISS instrument. This approach represents a significant step toward delivering higher accuracy measurements at modern observatories as demands on precision continue to rise.

astro-ph.IM↗

arXiv2026

The TOLIMAN mission: A low-cost space telescope for high precision narrow-angle astrometry

The TOLIMAN project is engaged with the construction, launch and operation of a low-cost space telescope of unorthodox optical design. Its primary science goal targets an exhaustive search for temperate-orbit rocky planets around either star in the alpha Centauri AB binary within our nearest-neighbor star system. Despite their favorable proximity and brightness, the detection of terrestrial exoplanets around such nearby Sun-like stars remains problematic for contemporary instrumental approaches. By performing narrow-angle astrometric monitoring of binary stars at extreme precision, any exoplanets will betray their presence by way of gravitationally-induced perturbations on the binary orbit. Recovery of this signal is challenging for it amounts to only a few microarcseconds of angular deflection (at best), and so is normally thought to require a large (meter-class) instrument. By implementing an innovative optical and signal encoding architecture, the TOLIMAN space telescope aims to recover such signals with a telescope aperture of only 12.5cm. This paper gives an overview of key features of the mission; in particular the concepts underlying the optics to enable image registration at the extreme levels of precision required. An outline is also provided, sketching further mission components and systems incorporated into the 16U CubeSat spacecraft bus in which the science payload is housed - all of which are now under construction.

astro-ph.IM↗

arXiv2025

Image reconstruction with the JWST Interferometer

Flying on board the James Webb Space Telescope (JWST) above Earth's turbulent atmosphere, the Aperture Masking Interferometer (AMI) on the NIRISS instrument is the highest-resolution infrared interferometer ever placed in space. However, its performance was found to be limited by non-linear detector systematics, particularly charge migration - or the Brighter-Fatter Effect. Conventional interferometric Fourier observables are degraded by non-linear transformations in the image plane, with the consequence that the inner working angle and contrast limits of AMI were seriously compromised. Building on the end-to-end differentiable model & calibration code amigo, we here present a regularised maximum-likelihood image reconstruction framework dorito which can deconvolve AMI images either in the image plane or from calibrated Fourier observables, achieving high angular resolution and contrast over a wider field of view than conventional interferometric limits. This modular code by default includes regularisation by maximum entropy, and total variation defined with $l_1$ or $l_2$ metrics. We present imaging results from dorito for three benchmark imaging datasets: the volcanoes of Jupiter's moon Io, the colliding-wind binary dust nebula WR 137 and the archetypal Seyfert 2 active galactic nucleus NGC 1068. In all three cases we recover images consistent with the literature at diffraction-limited resolutions. The performance, limitations, and future opportunities enabled by amigo for AMI imaging (and beyond) are discussed.

astro-ph.IM↗

arXiv2025

AMIGO: a Data-Driven Calibration of the JWST Interferometer

The James Webb Space Telescope (JWST) hosts a non-redundant Aperture Masking Interferometer (AMI) in its Near Infrared Imager and Slitless Spectrograph (NIRISS) instrument, providing the only dedicated interferometric facility aboard - magnitudes more precise than any interferometric experiment previously flown. However, the performance of AMI (and other high resolution approaches such as kernel phase) in recovery of structure at high contrasts has not met design expectations. A major contributing factor has been the presence of uncorrected detector systematics, notably charge migration effects in the H2RG sensor, and insufficiently accurate mask metrology. Here we present Amigo, a data-driven calibration framework and analysis pipeline that forward-models the full JWST AMI system - including its optics, detector physics, and readout electronics - using an end-to-end differentiable architecture implemented in the Jax framework and in particular exploiting the dLux optical modelling package. Amigo directly models the generation of up-the-ramp detector reads, using an embedded neural sub-module to capture non-linear charge redistribution effects, enabling the optimal extraction of robust observables, for example kernel amplitudes and phases, while mitigating systematics such as the brighter-fatter effect. We demonstrate Amigo's capabilities by recovering the ABDor AC binary from commissioning data with high-precision astrometry, and detecting both HD206893B and the inner substellar companion HD206893c: a benchmark requiring contrasts approaching 10 magnitudes at separations of only 100 mas. These results exceed outcomes from all published pipelines, and re-establish AMI as a viable competitor for imaging at high contrast at the diffraction limit. Amigo is publicly available as open-source software community resource.

astro-ph.IM↗

arXiv2024

The James Webb Interferometer: Space-based interferometric detections of PDS 70 b and c at 4.8 $\mu$m

We observed the planet-hosting system PDS 70 with the James Webb Interferometer, JWST's Aperture Masking Interferometric (AMI) mode within NIRISS. Observing with the F480M filter centered at 4.8 $\mu$m, we simultaneously fit geometrical models to the outer disk and the two known planetary companions. We re-detect the protoplanets PDS 70 b and c at an SNR of 14.7 and 7.0, respectively. Our photometry of both PDS 70 b and c provides tentative evidence of mid-IR circumplanetary disk emission through fitting SED models to these new measurements and those found in the literature. We also newly detect emission within the disk gap at an SNR of $\sim$4, at a position angle of $220^{+10}_{-15}$ degrees, and an unconstrained separation within $\sim$200 mas. Follow-up observations will be needed to determine the nature of this emission. We place a 5$\sigma$ upper limit of 208 $\pm$ 10 $\mu$Jy on the flux of the candidate PDS 70 d at 4.8 $\mu$m, which indicates that if the previously observed emission at shorter wavelengths is due to a planet, this putative planet has a different atmospheric composition than PDS 70 b or c. Finally, we place upper limits on emission from any additional planets in the disk gap. We find an azimuthally averaged 5$\sigma$ contrast upper limit $>$7 magnitudes at separations greater than 110 mas. These are the deepest limits to date within $\sim$250 mas at 4.8 $\mu$m and the first space-based interferometric observations of this system.

astro-ph.EP↗