arXiv subjects

Meiling Deng

Publications and source records attributed to Meiling Deng.

14 recordsLinked to original sources

arXiv2022

Characterization of the John A. Galt telescope for radio holography with CHIME

The Canadian Hydrogen Intensity Mapping Experiment (CHIME) will measure the 21 cm emission of astrophysical neutral hydrogen to probe large scale structure at redshifts z=0.8-2.5. However, detecting the 21 cm signal beneath substantially brighter foregrounds remains a key challenge. Due to the high dynamic range between 21 cm and foreground emission, an exquisite calibration of instrument systematics, notably the telescope beam, is required to successfully filter out the foregrounds. One technique being used to achieve a high fidelity measurement of the CHIME beam is radio holography, wherein signals from each of CHIME's analog inputs are correlated with the signal from a co-located reference antenna, the 26 m John A. Galt telescope, as the 26 m Galt telescope tracks a bright point source transiting over CHIME. In this work we present an analysis of several of the Galt telescope's properties. We employ driftscan measurements of several bright sources, along with background estimates derived from the 408 MHz Haslam map, to estimate the Galt system temperature. To determine the Galt telescope's beam shape, we perform and analyze a raster scan of the bright radio source Cassiopeia A. Finally, we use early holographic measurements to measure the Galt telescope's geometry with respect to CHIME for the holographic analysis of the CHIME and Galt interferometric data set.

astro-ph.IM↗

arXiv2022

Antenna characterization for the HIRAX experiment

The Hydrogen Intensity and Real-time Analysis eXperiment (HIRAX) aims to improve constraints on the dark energy equation of state through measurements of large-scale structure at high redshift ($0.8 $700MHz. Noise temperature measurements of the HIRAX feeds were performed in a custom apparatus built at Yale. In this system, identical loads, one cryogenic and the other at room temperature, are used to take a differential (Y-factor) measurement from which the noise of the system is inferred. Several measurement sets have been conducted using the system, involving CHIME feeds as well as four of the HIRAX active feeds. These measurements give the first noise temperature measurements of the HIRAX feed, revealing a $\sim$60K noise temperature (relative to 30K target) with 40K peak- to-peak frequency-dependent features, and provide the first demonstration of feed repeatability. Both findings inform current and future feed designs.

astro-ph.IM↗

arXiv2022

Detection of Cosmological 21 cm Emission with the Canadian Hydrogen Intensity Mapping Experiment

We present a detection of 21-cm emission from large-scale structure (LSS) between redshift 0.78 and 1.43 made with the Canadian Hydrogen Intensity Mapping Experiment (CHIME). Radio observations acquired over 102 nights are used to construct maps which are foreground filtered and stacked on the angular and spectral locations of luminous red galaxies (LRG), emission line galaxies (ELG), and quasars (QSO) from the eBOSS clustering catalogs. We find decisive evidence for a detection when stacking on all three tracers of LSS, with the logarithm of the Bayes Factor equal to 18.9 (LRG), 10.8 (ELG), and 56.3 (QSO). An alternative frequentist interpretation, based on the likelihood-ratio test, yields a detection significance of $7.1\sigma$ (LRG), $5.7\sigma$ (ELG), and $11.1\sigma$ (QSO). These are the first 21-cm intensity mapping measurements made with an interferometer. We constrain the effective clustering amplitude of neutral hydrogen (HI), defined as $\mathcal{A}_{\rm HI}\equiv 10^{3}\,\Omega_\mathrm{HI}\left(b_\mathrm{HI}+\langle\,f\mu^{2}\rangle\right)$, where $\Omega_\mathrm{HI}$ is the cosmic abundance of HI, $b_\mathrm{HI}$ is the linear bias of HI, and $\langle\,f\mu^{2}\rangle=0.552$ encodes the effect of redshift-space distortions at linear order. We find $\mathcal{A}_\mathrm{HI}=1.51^{+3.60}_{-0.97}$ for LRGs $(z=0.84)$, $\mathcal{A}_\mathrm{HI}=6.76^{+9.04}_{-3.79}$ for ELGs $(z=0.96)$, and $\mathcal{A}_\mathrm{HI}=1.68^{+1.10}_{-0.67}$ for QSOs $(z=1.20)$, with constraints limited by modeling uncertainties at nonlinear scales. We are also sensitive to bias in the spectroscopic redshifts of each tracer, and find a non-zero bias $\Delta\,v= -66 \pm 20 \mathrm{km/s}$ for the QSOs. We split the QSO catalog into three redshift bins and have a decisive detection in each, with the upper bin at $z=1.30$ producing the highest redshift 21-cm intensity mapping measurement thus far.

astro-ph.CO↗

arXiv2022

Using the Sun to Measure the Primary Beam Response of the Canadian Hydrogen Intensity Mapping Experiment

We present a beam pattern measurement of the Canadian Hydrogen Intensity Mapping Experiment (CHIME) made using the Sun as a calibration source. As CHIME is a pure drift scan instrument, we rely on the seasonal North-South motion of the Sun to probe the beam at different elevations. This semiannual range in elevation, combined with the radio brightness of the Sun, enables a beam measurement which spans ~7,200 square degrees on the sky without the need to move the telescope. We take advantage of observations made near solar minimum to minimize the impact of solar variability, which is observed to be <10% in intensity over the observation period. The resulting data set is highly complementary to other CHIME beam measurements -- both in terms of angular coverage and systematics -- and plays an important role in the ongoing program to characterize the CHIME primary beam.

astro-ph.IM↗

arXiv2022

An Overview of CHIME, the Canadian Hydrogen Intensity Mapping Experiment

The Canadian Hydrogen Intensity Mapping Experiment (CHIME) is a drift scan radio telescope operating across the 400-800 MHz band. CHIME is located at the Dominion Radio Astrophysical Observatory near Penticton, BC Canada. The instrument is designed to map neutral hydrogen over the redshift range 0.8 to 2.5 to constrain the expansion history of the Universe. This goal drives the design features of the instrument. CHIME consists of four parallel cylindrical reflectors, oriented north-south, each 100 m $\times$ 20 m and outfitted with a 256 element dual-polarization linear feed array. CHIME observes a two degree wide stripe covering the entire meridian at any given moment, observing 3/4 of the sky every day due to Earth rotation. An FX correlator utilizes FPGAs and GPUs to digitize and correlate the signals, with different correlation products generated for cosmological, fast radio burst, pulsar, VLBI, and 21 cm absorber backends. For the cosmology backend, the $N_\mathrm{feed}^2$ correlation matrix is formed for 1024 frequency channels across the band every 31 ms. A data receiver system applies calibration and flagging and, for our primary cosmological data product, stacks redundant baselines and integrates for 10 s. We present an overview of the instrument, its performance metrics based on the first three years of science data, and we describe the current progress in characterizing CHIME's primary beam response. We also present maps of the sky derived from CHIME data; we are using versions of these maps for a cosmological stacking analysis as well as for investigation of Galactic foregrounds.

astro-ph.IM↗

arXiv2021

Sub-second periodicity in a fast radio burst

Fast radio bursts (FRBs) are millisecond-duration flashes of radio waves that are visible at distances of billions of light-years. The nature of their progenitors and their emission mechanism remain open astrophysical questions. Here we report the detection of the multi-component FRB 20191221A and the identification of a periodic separation of 216.8(1) ms between its components with a significance of 6.5 sigmas. The long (~3 s) duration and nine or more components forming the pulse profile make this source an outlier in the FRB population. Such short periodicity provides strong evidence for a neutron-star origin of the event. Moreover, our detection favours emission arising from the neutron-star magnetosphere, as opposed to emission regions located further away from the star, as predicted by some models.

astro-ph.HE↗

arXiv2021

The First CHIME/FRB Fast Radio Burst Catalog

We present a catalog of 536 fast radio bursts (FRBs) detected by the Canadian Hydrogen Intensity Mapping Experiment Fast Radio Burst (CHIME/FRB) Project between 400 and 800 MHz from 2018 July 25 to 2019 July 1, including 62 bursts from 18 previously reported repeating sources. The catalog represents the first large sample, including bursts from repeaters and non-repeaters, observed in a single survey with uniform selection effects. This facilitates comparative and absolute studies of the FRB population. We show that repeaters and apparent non-repeaters have sky locations and dispersion measures (DMs) that are consistent with being drawn from the same distribution. However, bursts from repeating sources differ from apparent non-repeaters in intrinsic temporal width and spectral bandwidth. Through injection of simulated events into our detection pipeline, we perform an absolute calibration of selection effects to account for systematic biases. We find evidence for a population of FRBs - comprising a large fraction of the overall population - with a scattering time at 600 MHz in excess of 10 ms, of which only a small fraction are observed by CHIME/FRB. We infer a power-law index for the cumulative fluence distribution of $\alpha=-1.40\pm0.11(\textrm{stat.})^{+0.06}_{-0.09}(\textrm{sys.})$, consistent with the $-3/2$ expectation for a non-evolving population in Euclidean space. We find $\alpha$ is steeper for high-DM events and shallower for low-DM events, which is what would be expected when DM is correlated with distance. We infer a sky rate of $[525\pm30(\textrm{stat.})^{+140}_{-130}({\textrm{sys.}})]/\textrm{sky}/\textrm{day}$ above a fluence of 5 Jy ms at 600 MHz, with scattering time at $600$ MHz under 10 ms, and DM above 100 pc cm$^{-3}$.

astro-ph.HE↗

arXiv2019

Observations of Fast Radio Bursts at Frequencies down to 400 Megahertz

Fast radio bursts (FRBs) are highly dispersed millisecond-duration radio flashes likely arriving from far outside the Milky Way galaxy. This phenomenon was discovered at radio frequencies near 1.4 GHz and to date has been observed in one case at as high as 8 GHz, but not below 700 MHz in spite of significant searches at low frequencies. Here we report detections of FRBs at radio frequencies as low as 400 MHz, on the Canadian Hydrogen Intensity Mapping Experiment (CHIME) using the CHIME/FRB instrument. We present 13 FRBs detected during a telescope pre-commissioning phase, when our sensitivity and field-of-view were not yet at design specifications. Emission in multiple events is seen down to 400 MHz, the lowest radio frequency to which we are sensitive. The FRBs show a variety of temporal scattering behaviours, with the majority significantly scattered, and some apparently unscattered to within measurement uncertainty even at our lowest frequencies. Of the 13 reported here, one event has the lowest dispersion measure yet reported, implying it is among the closest yet known, and another has shown multiple repeat bursts, as described in a companion paper. Our low-scattering events suggest that efforts to detect FRBs at radio frequencies below 400 MHz will eventually be successful. The overall scattering properties of our sample suggest that FRBs as a class are preferentially located in environments that scatter radio waves more strongly than the diffuse interstellar medium (ISM) in the Milky Way.

astro-ph.HE↗

arXiv2017

The cloverleaf antenna: A compact wide-bandwidth dual-polarization feed for CHIME

We have developed a compact, wide-bandwidth, dual-polarization cloverleaf-shaped antenna to feed the CHIME radio telescope. The antenna has been tuned using CST to have smaller than -10dB s11 for over an octave of bandwidth, covering the full CHIME band from 400MHz to 800MHz and this performance has been confirmed by measurement. The antennas are made of conventional low loss circuit boards and can be mass produced economically, which is important because CHIME requires 1280 feeds. They are compact enough to be placed 30cm apart in a linear array at any azimuthal rotation.

astro-ph.IM↗

arXiv2017

Limits on the ultra-bright Fast Radio Burst population from the CHIME Pathfinder

We present results from a new incoherent-beam Fast Radio Burst (FRB) search on the Canadian Hydrogen Intensity Mapping Experiment (CHIME) Pathfinder. Its large instantaneous field of view (FoV) and relative thermal insensitivity allow us to probe the ultra-bright tail of the FRB distribution, and to test a recent claim that this distribution's slope, $\alpha\equiv-\frac{\partial \log N}{\partial \log S}$, is quite small. A 256-input incoherent beamformer was deployed on the CHIME Pathfinder for this purpose. If the FRB distribution were described by a single power-law with $\alpha=0.7$, we would expect an FRB detection every few days, making this the fastest survey on sky at present. We collected 1268 hours of data, amounting to one of the largest exposures of any FRB survey, with over 2.4\,$\times$\,10$^5$\,deg$^2$\,hrs. Having seen no bursts, we have constrained the rate of extremely bright events to $<\!13$\,sky$^{-1}$\,day$^{-1}$ above $\sim$\,220$\sqrt{(\tau/\rm ms)}$ Jy\,ms for $\tau$ between 1.3 and 100\,ms, at 400--800\,MHz. The non-detection also allows us to rule out $\alpha\lesssim0.9$ with 95$\%$ confidence, after marginalizing over uncertainties in the GBT rate at 700--900\,MHz, though we show that for a cosmological population and a large dynamic range in flux density, $\alpha$ is brightness-dependent. Since FRBs now extend to large enough distances that non-Euclidean effects are significant, there is still expected to be a dearth of faint events and relative excess of bright events. Nevertheless we have constrained the allowed number of ultra-intense FRBs. While this does not have significant implications for deeper, large-FoV surveys like full CHIME and APERTIF, it does have important consequences for other wide-field, small dish experiments.

astro-ph.HE↗

arXiv2016

Holographic Beam Mapping of the CHIME Pathfinder Array

The Canadian Hydrogen Intensity Mapping Experiment (CHIME) Pathfinder radio telescope is currently surveying the northern hemisphere between 400 and 800 MHz. By mapping the large scale structure of neutral hydrogen through its redshifted 21 cm line emission between $z \sim 0.8-2.5$ CHIME will contribute to our understanding of Dark Energy. Bright astrophysical foregrounds must be separated from the neutral hydrogen signal, a task which requires precise characterization of the polarized telescope beams. Using the DRAO John A. Galt 26 m telescope, we have developed a holography instrument and technique for mapping the CHIME Pathfinder beams. We report the status of the instrument and initial results of this effort.

astro-ph.IM↗

arXiv2015

A compression scheme for radio data in high performance computing

We present a procedure for efficiently compressing astronomical radio data for high performance applications. Integrated, post-correlation data are first passed through a nearly lossless rounding step which compares the precision of the data to a generalized and calibration-independent form of the radiometer equation. This allows the precision of the data to be reduced in a way that has an insignificant impact on the data. The newly developed Bitshuffle lossless compression algorithm is subsequently applied. When the algorithm is used in conjunction with the HDF5 library and data format, data produced by the CHIME Pathfinder telescope is compressed to 28% of its original size and decompression throughputs in excess of 1 GB/s are obtained on a single core.

astro-ph.IM↗

arXiv2014

Canadian Hydrogen Intensity Mapping Experiment (CHIME) Pathfinder

A pathfinder version of CHIME (the Canadian Hydrogen Intensity Mapping Experiment) is currently being commissioned at the Dominion Radio Astrophysical Observatory (DRAO) in Penticton, BC. The instrument is a hybrid cylindrical interferometer designed to measure the large scale neutral hydrogen power spectrum across the redshift range 0.8 to 2.5. The power spectrum will be used to measure the baryon acoustic oscillation (BAO) scale across this poorly probed redshift range where dark energy becomes a significant contributor to the evolution of the Universe. The instrument revives the cylinder design in radio astronomy with a wide field survey as a primary goal. Modern low-noise amplifiers and digital processing remove the necessity for the analog beamforming that characterized previous designs. The Pathfinder consists of two cylinders 37\,m long by 20\,m wide oriented north-south for a total collecting area of 1,500 square meters. The cylinders are stationary with no moving parts, and form a transit instrument with an instantaneous field of view of $\sim$100\,degrees by 1-2\,degrees. Each CHIME Pathfinder cylinder has a feedline with 64 dual polarization feeds placed every $\sim$30\,cm which Nyquist sample the north-south sky over much of the frequency band. The signals from each dual-polarization feed are independently amplified, filtered to 400-800\,MHz, and directly sampled at 800\,MSps using 8 bits. The correlator is an FX design, where the Fourier transform channelization is performed in FPGAs, which are interfaced to a set of GPUs that compute the correlation matrix. The CHIME Pathfinder is a 1/10th scale prototype version of CHIME and is designed to detect the BAO feature and constrain the distance-redshift relation.

astro-ph.IM↗

arXiv2014

Calibrating CHIME, A New Radio Interferometer to Probe Dark Energy

The Canadian Hydrogen Intensity Mapping Experiment (CHIME) is a transit interferometer currently being built at the Dominion Radio Astrophysical Observatory (DRAO) in Penticton, BC, Canada. We will use CHIME to map neutral hydrogen in the frequency range 400 -- 800\,MHz over half of the sky, producing a measurement of baryon acoustic oscillations (BAO) at redshifts between 0.8 -- 2.5 to probe dark energy. We have deployed a pathfinder version of CHIME that will yield constraints on the BAO power spectrum and provide a test-bed for our calibration scheme. I will discuss the CHIME calibration requirements and describe instrumentation we are developing to meet these requirements.

astro-ph.IM↗