Search arXiv⌕ Search

arXiv subjects

Mohamed-Slim Alouini

Publications and source records attributed to Mohamed-Slim Alouini.

At least 253 records · Page 14Linked to original sources

EMF-Aware Cellular Networks in RIS-Assisted Environments

The deployment of the 5th-generation cellular networks (5G) and beyond has triggered health concerns due to the electric and magnetic fields (EMF) exposure. In this paper, we propose a novel architecture to minimize the population exposure to EMF by considering a smart radio environment with a reconfigurable intelligent surface (RIS). Then, we optimize the RIS phases to minimize the exposure in terms of the exposure index (EI) while maintaining a minimum target quality of service. The proposed scheme achieves up to 20% reduction in EI compared to schemes without RISs.

eess.SY↗

On the Capacity of Intensity-Modulation Direct-Detection Gaussian Optical Wireless Communication Channels: A Tutorial

Optical wireless communication (OWC) using intensity-modulation and direct-detection (IM/DD) has a channel model which possesses unique features, due to the constraints imposed on the channel input. The aim of this tutorial is to overview results on the capacity of IM/DD channels with input-independent Gaussian noise as a model of OWC channels. It provides the reader with an entry point to the topic, and highlights some major contributions in this area. It begins with a discussion on channel models and how this IM/DD Gaussian channel model comes about, in addition to an explanation of input constraints. Then, it discusses the capacity of the single-input single-output channel, its computation, and capacity bounds and asymptotic capacity results. Then, it extends the discussion to the multiple-input multiple-output setup, and reviews capacity bounds for this channel model. Finally, it discusses multi-user channels modelled as a broadcast channel (downlink) or a multiple-access channel (uplink), with their associated capacity bounds.

cs.IT↗

Dual Attention-Based Federated Learning for Wireless Traffic Prediction

Wireless traffic prediction is essential for cellular networks to realize intelligent network operations, such as load-aware resource management and predictive control. Existing prediction approaches usually adopt centralized training architectures and require the transferring of huge amounts of traffic data, which may raise delay and privacy concerns for certain scenarios. In this work, we propose a novel wireless traffic prediction framework named \textit{Dual Attention-Based Federated Learning} (FedDA), by which a high-quality prediction model is trained collaboratively by multiple edge clients. To simultaneously capture the various wireless traffic patterns and keep raw data locally, FedDA first groups the clients into different clusters by using a small augmentation dataset. Then, a quasi-global model is trained and shared among clients as prior knowledge, aiming to solve the statistical heterogeneity challenge confronted with federated learning. To construct the global model, a dual attention scheme is further proposed by aggregating the intra- and inter-cluster models, instead of simply averaging the weights of local models. We conduct extensive experiments on two real-world wireless traffic datasets and results show that FedDA outperforms state-of-the-art methods. The average mean squared error performance gains on the two datasets are up to 10\% and 30\%, respectively.

cs.DC↗

Distributed Resource Management in Downlink Cache-Enabled Multi-Cloud Radio Access Networks

In light of the premises of beyond fifth generation (B5G) networks, the need for better exploiting the capabilities of cloud-enabled networks arises, so as to cope with the large-scale interference resulting from the massive increase of data-hungry systems. A compound of several clouds, jointly managing inter-cloud and intra-cloud interference, constitutes a practical solution to account for the requirements of B5G networks. This paper considers a multi-cloud radio access network model (MC-RAN), where each cloud is connected to a distinct set of base stations (BSs) via limited capacity fronthaul links. The BSs are equipped with local cache storage and baseband processing capabilities, as a means to alleviate the fronthaul congestion problem. The paper then investigates the problem of jointly assigning users to clouds and determining their beamforming vectors so as to maximize the network-wide energy efficiency (EE) subject to fronthaul capacity and transmit power constraints. This paper solves such a mixed discrete-continuous, non-convex optimization problem using fractional programming (FP) and successive inner-convex approximation (SICA) techniques to deal with the non-convexity of the continuous part of the problem, and $l_0$-norm approximation to account for the binary association part. A highlight of the proposed algorithm is its capability of being implemented in a distributed fashion across the network's multiple clouds through a reasonable amount of information exchange. The numerical simulations illustrate the pronounced role the proposed algorithm plays in alleviating the interference of large-scale MC-RANs, especially in dense networks.

cs.IT↗

Drone Charging Stations Deployment in Rural Areas for Better Wireless Coverage: Challenges and Solutions

While the fifth-generation cellular (5G) is meant to deliver Gigabit peak data speeds, low latency, and connect to billions of devices, and 6G is already on the way, half of the world population living in rural areas are still facing challenges connecting to the internet. Compared with urban areas, users in rural areas are greatly impacted by low income, high cost of backhaul connectivity, limited resources, extreme weather, and natural geographical limitations. Hereby, how to connect the rural areas and what are the difficulties of providing connectivity draw great attention. This article first provides a brief discussion about existing technologies and strategies for enhancing the network coverage in rural areas, their advantages, limitations, and cost. Next, we mainly focus on the UAV-assisted network in resource-limited regions. Considering the limitation of the on-board battery of UAVs and the electricity supply scarcity in some rural regions, we investigate the possibility and performance enhancement of the deployment of renewable energy (RE) charging stations. We outline three practical scenarios, and use simulation results to demonstrate that RE charging stations can be a possible solution to address the limited on-board battery of UAVs in rural areas, specially when they can harvest and store enough energy. Finally, future works and challenges are discussed.

eess.SY↗

On-Demand Networking for Ubiquitous Connectivity and Network Resilience: A Network-in-a-Box Solution

Recently, the wireless community has initiated research on the sixth generation (6G) cellular network for the next decade. The 6G visions are still under development but are converging toward ubiquitous, sustainable, and automated digital society. A network-in-a-box (NIB) is a portable and fully-fledged networking solution that has many potentials to stimulate 6G visions, especially for ubiquitous and resilient network connectivity. In this article, we highlight how NIB features suit 6G use cases and requirements and how it can be used for 6G communications. In addition, we discuss the challenges of the potential enabling technologies of 6G that can reinforce the NIB performance.

cs.NI↗

Weight Vector Tuning and Asymptotic Analysis of Binary Linear Classifiers

Unlike its intercept, a linear classifier's weight vector cannot be tuned by a simple grid search. Hence, this paper proposes weight vector tuning of a generic binary linear classifier through the parameterization of a decomposition of the discriminant by a scalar which controls the trade-off between conflicting informative and noisy terms. By varying this parameter, the original weight vector is modified in a meaningful way. Applying this method to a number of linear classifiers under a variety of data dimensionality and sample size settings reveals that the classification performance loss due to non-optimal native hyperparameters can be compensated for by weight vector tuning. This yields computational savings as the proposed tuning method reduces to tuning a scalar compared to tuning the native hyperparameter, which may involve repeated weight vector generation along with its burden of optimization, dimensionality reduction, etc., depending on the classifier. It is also found that weight vector tuning significantly improves the performance of Linear Discriminant Analysis (LDA) under high estimation noise. Proceeding from this second finding, an asymptotic study of the misclassification probability of the parameterized LDA classifier in the growth regime where the data dimensionality and sample size are comparable is conducted. Using random matrix theory, the misclassification probability is shown to converge to a quantity that is a function of the true statistics of the data. Additionally, an estimator of the misclassification probability is derived. Finally, computationally efficient tuning of the parameter using this estimator is demonstrated on real data.

stat.ML↗

On the Topological Aspects of UAV-Assisted Post-Disaster Wireless Communication Networks

In the context of sixth-generation (6G) networks, emergency management systems (EMSs) based on wireless communications have recently gained increasing interest. Hereby, fundamentals and open problems of post-disaster communications are discussed, especially focusing on their topological aspects. The motivation behind this choice is due to the fact that, whenever a natural or a man-made disaster occurs, there is a high chance that the terrestrial communication infrastructure is compromised, and therefore alternative networks need to be deployed efficiently in order to enable the majority of the civilians and the first responders (FRs) to communicate. In this paper, we first provide a brief review of existing aerial ad-hoc networks for post-disaster communications. Next, we shed light on some new aspects of this problem, which are related to the topology of the network supporting the impacted area. Finally, with the aid of selected simulation results, we show how the cellular infrastructure requirements for a disaster-struck region significantly depend on its location and its extension.

eess.SP↗

Exploiting Wind Turbine-Mounted Base Stations to Enhance Rural Connectivity

Although global connectivity is one of the main requirements for future generations of wireless networks driven by the United Nation's Sustainable Development Goals (SDGs), telecommunication (telecom) providers are economically discouraged from investing in sparsely populated areas, such as rural and remote ones. Novel affordable and sustainable paradigms are thus indispensable to enhance the cellular infrastructure in such areas and bridge the digital divide when compared with urban ones. We investigate the use of wind turbine-mounted base stations (WTBSs) as a cost-effective solution for regions with high wind energy potential, since it could replace or even outperform current solutions requiring additional cell towers (CTs), satellites, or aerial base stations (ABSs). Indeed, conveniently installing base station (BS) equipment on wind generators would allow the transceivers to reach sufficient altitudes and easily establish line-of-sight (LoS) channels within large areas. We also propose insightful simulation results for realistic case studies based on data sets for wind speed and population densities as well as wind turbines' (WTs') and CTs' locations within specific French, Argentine, and Ethiopian exurban regions. By doing this, we hope to prove the feasibility and the effectiveness of this solution and stimulate its implementation.

eess.SY↗

Secrecy Capacity Bounds for Visible Light Communications With Signal-Dependent Noise

In physical-layer security, one of the most fundamental issues is the secrecy capacity. The objective of this paper is to determine the secrecy capacity for an indoor visible light communication system consisting of a transmitter, a legitimate receiver and an eavesdropping receiver. In such a system, both signal-independent and signal-dependent Gaussian noises are considered. Under non-negativity and average optical intensity constraints, lower and upper secrecy capacity bounds are first derived by the variational method, the dual expression of the secrecy capacity, and the concept of "the optimal input distribution that escapes to infinity". Numerical results show that the secrecy capacity upper and lower bounds are tight. By an asymptotic analysis at large optical intensity, there is a small performance gap between the asymptotic upper and lower bounds. Then, by adding a peak optical intensity constraint, we further analyze the exact and asymptotic secrecy capacity bounds. Finally, the tightness of the derived bounds is verified by numerical results.

cs.IT↗

On Topology Optimization and Routing in Integrated Access and Backhaul Networks: A Genetic Algorithm-based Approach

In this paper, we study the problem of topology optimization and routing in integrated access and backhaul (IAB) networks, as one of the promising techniques for evolving 5G networks. We study the problem from different perspectives. We develop efficient genetic algorithm-based schemes for both IAB node placement and non-IAB backhaul link distribution, and evaluate the effect of routing on bypassing temporal blockages. Here, concentrating on millimeter wave-based communications, we study the service coverage probability, defined as the probability of the event that the user equipments' (UEs) minimum rate requirements are satisfied. Moreover, we study the effect of different parameters such as the antenna gain, blockage and tree foliage on the system performance. Finally, we summarize the recent Rel-16 as well as the upcoming Rel-17 3GPP discussions on routing in IAB networks, and discuss the main challenges for enabling mesh-based IAB networks. As we show, with a proper network topology, IAB is an attractive approach to enable the network densification required by 5G and beyond.

cs.NI↗

Performance of UAV assisted Multiuser Terrestrial-Satellite Communication System over Mixed FSO/RF Channels

In this work, performance of a multi-antenna multiuser unmanned aerial vehicle (UAV) assisted terrestrial-satellite communication system over mixed free space optics (FSO)/ radio frequency (RF) channels is analyzed. Downlink transmission from the satellite to the UAV is completed through FSO link which follows Gamma-Gamma distribution with pointing error impairments. Both the heterodyne detection and intensity modulation direct detection techniques are considered at the FSO receiver. To avail the antenna diversity, multiple transmit antennas are considered at the UAV. Selective decode-and-forward scheme is assumed at the UAV and opportunistic user scheduling is performed while considering the practical constraints of outdated channel state information (CSI) during the user selection and transmission phase. The RF links are assumed to follow Nakagami-m distribution due to its versatile nature. In this context, for the performance analysis, analytical expressions of outage probability, asymptotic outage probability, ergodic capacity, effective capacity, and generalized average symbol-error-rate expressions of various quadrature amplitude modulation (QAM) schemes such as hexagonal-QAM, cross-QAM, and rectangular QAM are derived. A comparison of various modulation schemes is presented. Further, the impact of pointing error, number of antennas, delay constraint, fading severity, and imperfect CSI are highlighted on the system performance. Finally, all the analytical results are verified through the Monte-Carlo simulations.

eess.SP↗

Non-terrestrial Communications Assisted by Reconfigurable Intelligent Surfaces

Non-terrestrial communications have emerged as a key enabler for seamless connectivity in the upcoming generation networks. This kind of network can support high data rate communications among aerial platforms (i.e., unmanned aerial vehicles (UAVs), high-altitude platforms (HAPs), and satellites) and cellular networks, achieving anywhere and anytime connections. However, there are many practical implementation limitations, especially overload power consumption, high probability of blockage, and dynamic propagation environment. Fortunately, the recent technology reconfigurable intelligent surface (RIS) is expected to be one of the most cost-efficient solutions to address such issues. RIS with low-cost elements can bypass blockages and create multiple line-of-sight (LoS) links, and provide controllable communication channels. In this paper, we present a comprehensive literature review on the RIS-assisted non-terrestrial networks (RANTNs). Firstly, the framework of the RANTNs is introduced with detailed discussion about distinct properties of RIS in NTNs and the two types of RIS, that is, terrestrial RISs (TRISs), and aerial RISs (ARISs), and the classification of RANTNs including RIS-assisted air-to-ground (A2G)/ground-to-air (G2A), ARIS-assisted ground-to-ground (G2G), and RIS-assisted air-to-air (A2A) communications. In combination with next-generation communication technologies, the advanced technologies in RANTNs are discussed. Then we overview the literature related to RANTNs from the perspectives of performance analysis and optimization, followed by the widely used methodologies. Finally, open challenges and future research direction in the context of the RANTNs are highlighted.

cs.IT↗

Coverage and Rate Analysis in Coexisting Terahertz and RF Finite Wireless Networks

Wireless communications over Terahertz (THz)-band frequencies are vital enablers of ultra-high rate applications and services in sixth-generation (6G) networks. However, THz communications suffer from poor coverage because of inherent THz features such as high penetration losses, severe path loss, and significant molecular absorption. To surmount these critical challenges and fully exploit the THz band, we explore a coexisting radio frequency (RF) and THz finite indoor network in which THz small cells are deployed to provide high data rates, and RF macrocells are deployed to satisfy coverage requirements. Using stochastic geometry tools, we assess the performance of coexisting RF and THz networks in terms of coverage probability and average achievable rate. The accuracy of the analytical results is validated with Monte-Carlo simulations. Several insights are devised for accurate tuning and optimization of THz system parameters, including the fraction of THz access points (APs) to deploy, and the THz bias. The obtained results recognize a clear coverage/rate trade-off where a high fraction of THz AP improves the rate significantly but may degrade the coverage performance. Furthermore, the location of the user in the finite area highly affects the fraction of THz APs that optimizes the performance.

cs.IT↗

An Overview of Signal Processing Techniques for Terahertz Communications

Terahertz (THz)-band communications are a key enabler for future-generation wireless communications systems that promise to integrate a wide range of data-demanding applications. Recent advances in photonic, electronic, and plasmonic technologies are closing the gap in THz transceiver design. Consequently, prospect THz signal generation, modulation, and radiation methods are converging, and corresponding channel model, noise, and hardware-impairment notions are emerging. Such progress establishes a foundation for well-grounded research into THz-specific signal processing techniques for wireless communications. This tutorial overviews these techniques, emphasizing ultra-massive multiple-input multiple-output (UM-MIMO) systems and reconfigurable intelligent surfaces, vital for overcoming the distance problem at very high frequencies. We focus on the classical problems of waveform design and modulation, beamforming and precoding, index modulation, channel estimation, channel coding, and data detection. We also motivate signal processing techniques for THz sensing and localization.

eess.SP↗

Health Risks Associated with 5G Exposure: A View from the Communications Engineering Perspective

The deployment of 5G wireless communication services requires the installation of 5G next-generation Node-B Base Stations (gNBs) over the territory and the wide adoption of 5G User Equipment (UE). In this context, the population is concerned about the potential health risks associated with the Radio Frequency (RF) emissions from 5G equipment, with several communities actively working toward stopping the 5G deployment. To face these concerns, in this work, we analyze the health risks associated with 5G exposure by adopting a new and comprehensive viewpoint, based on the communications engineering perspective. By exploiting our background, we analyze the alleged health effects of 5G exposure and critically review the latest works that are often referenced to support the health concerns from 5G. We then precisely examine the up-to-date metrics, regulations, and assessment of compliance procedures for 5G exposure, by evaluating the latest guidelines from IEEE, ICNIRP, ITU, IEC, and FCC, as well as the national regulations in more than 220 countries. We also thoroughly analyze the main health risks that are frequently associated with specific 5G features (e.g., MIMO, beamforming, cell densification, adoption of millimeter waves, and connection of millions of devices). Finally, we examine the risk mitigation techniques based on communications engineering that can be implemented to reduce the exposure from 5G gNB and UE. Overall, we argue that the widely perceived health risks that are attributed to 5G are not supported by scientific evidence from communications engineering. In addition, we explain how the solutions to minimize the health risks from 5G are already mature and ready to be implemented. Finally, future works, e.g., aimed at evaluating long-term impacts of 5G exposure, as well as innovative solutions to further reduce the RF emissions, are suggested.

eess.SP↗

A Survey on Integrated Access and Backhaul Networks

Benefiting from the usage of the high-frequency band, utilizing part of the large available bandwidth for wireless backhauling is feasible without considerable performance sacrifice. In this context, integrated access and backhaul (IAB) was proposed by 3GPP to reduce the fiber optics deployment cost of 5G and beyond networks. In this paper, we first give a brief introduction of IAB based on the 3GPP release. After that, we survey existing research on IAB networks, the integrations of IAB to cache-enabled network, optical communication transport network, and the non-terrestrial network. Finally, we discuss the challenges and opportunities that might arise while developing and commercializing IAB networks.

cs.NI↗

The Potential of Multilayered Hierarchical Nonterrestrial Networks for 6G: A Comparative Analysis Among Networking Architectures

6th generation (6G) communication research is currently focusing on non-terrestrial networks (NTNs) to promote ubiquitous and ultra-high-capacity global connectivity. Specifically, multi-layered hierarchical networks, i.e., the orchestration among different aerial/space platforms, including Low and High Altitude Platforms (LAPs and HAPs), and satellites co-operating at different altitudes, currently represent one the most attractive technological options to solve coverage and latency constraints associated with the NTN paradigm. However, there are still several issues to be resolved for proper network design. In this work, we evaluate the performance of different multi-layered non-terrestrial configurations, and provide guidelines on the optimal working point(s) for which it is possible to achieve a good compromise between improved system flexibility and network performance, with respect to a baseline standalone deployment.

cs.NI↗