arXiv subjects

Mohamed-Slim Alouini

Publications and source records attributed to Mohamed-Slim Alouini.

At least 325 records · Page 18Linked to original sources

arXiv2020

On Integrated Access and Backhaul Networks: Current Status and Potentials

In this paper, we introduce and study the potentials and challenges of integrated access and backhaul (IAB) as one of the promising techniques for evolving 5G networks. We study IAB networks from different perspectives. We summarize the recent Rel-16 as well as the upcoming Rel-17 3GPP discussions on IAB, and highlight the main IAB-specific agreements on different protocol layers. Also, concentrating on millimeter wave-based communications, we evaluate the performance of IAB networks in both dense and suburban areas. Using a finite stochastic geometry model, with random distributions of IAB nodes as well as user equipments (UEs) in a finite region, we study the service coverage rate defined as the probability of the event that the UEs' minimum rate requirements are satisfied. We present comparisons between IAB and hybrid IAB/fiber-backhauled networks where a part or all of the small base stations are fiber-connected. Finally, we study the robustness of IAB networks to weather and various deployment conditions and verify their effects, such as blockage, tree foliage, rain as well as antenna height/gain on the coverage rate of IAB setups, as the key differences between the fiber-connected and IAB networks. As we show, IAB is an attractive approach to enable the network densification required by 5G and beyond.

cs.IT↗

arXiv2020

Deep Learning in Industrial Internet of Things: Potentials, Challenges, and Emerging Applications

The recent advancements in the Internet of Things (IoT) are giving rise to the proliferation of interconnected devices, enabling various smart applications. These enormous number of IoT devices generates a large capacity of data that further require intelligent data analysis and processing methods, such as Deep Learning (DL). Notably, the DL algorithms, when applied in the Industrial Internet of Things (IIoT), can enable various applications such as smart assembling, smart manufacturing, efficient networking, and accident detection-and-prevention. Therefore, motivated by these numerous applications; in this paper, we present the key potentials of DL in IIoT. First, we review various DL techniques, including convolutional neural networks, auto-encoders, and recurrent neural networks and there use in different industries. Then, we outline numerous use cases of DL for IIoT systems, including smart manufacturing, smart metering, smart agriculture, etc. Moreover, we categorize several research challenges regarding the effective design and appropriate implementation of DL-IIoT. Finally, we present several future research directions to inspire and motivate further research in this area.

eess.SP↗

arXiv2020

Topology Optimization for 6G Networks: A Network Information-Theoretic Approach

The classical approach of avoiding or ignoring interference in wireless networks cannot accommodate the ambitious quality-of-service demands of ultra-dense cellular networks (CNs). However, recent ground-breaking information-theoretic advances changed our perception of interference from a foe to a friend. This paper aims to shed light on harnessing the benefits of integrating modern interference management (IM) schemes into future CNs. To this end, we envision a hybrid multiple access (HMA) scheme that decomposes the network into sub-topologies of potential IM schemes for more efficient utilization of network resources. Preliminary results show that HMA can multiply non-orthogonal multiple access performance, especially under dense user deployment.

cs.NI↗

arXiv2020

Aerial Base Stations Deployment in 6G Cellular Networks using Tethered Drones: The Mobility and Endurance Trade-off

Airborne base stations (carried by drones) have a great potential to enhance coverage and capacity of cellular networks. Multiple scenarios and use cases will highly benefit from such technology such as (i) offloading terrestrial base stations (BSs) in dense and urban areas, and (ii) providing coverage for rural areas. However, one of the main challenges facing the deployment of airborne BSs is the limited available energy at the drone, which limits the flight time. In fact, most of the currently used unmanned aerial vehicles (UAVs) can only operate for one hour maximum. This limits the performance of the UAV-enabled cellular network due to the need to frequently visit the ground station to recharge, leaving the UAV's coverage area temporarily out of service. In this article, we propose a new UAV-enabled cellular network setup based on tethered UAVs (TUAVs). In the proposed setup, the TUAV is connected to a ground station (GS) through a tether, which provides the TUAV with both energy and data. This enables a flight that can stay for days. We describe in detail the components of the proposed system. Furthermore, we enlist the main advantages of a TUAV-enabled cellular network compared to typical untethered UAVs. Next, we discuss the potential applications and use cases for TUAVs. Finally, we discuss the challenges, design considerations, and future research directions to realize the proposed setup.

cs.NI↗

arXiv2020

Viral Aerosol Concentration Characterization and Detection in Bounded Environments

Viral spread has been intermittently threatening human life over time. Characterizing the viral concentration and modelling the viral transmission are, therefore, considered major milestones for enhancing viral detection capabilities. This paper addresses the problem of viral aerosol detection based on the exhaled breath in a bounded environment, e.g., a bounded room. The paper models the exhaled breath as a cloud which is emitted through the room continuously, and analyzes the temporal-spatial virus concentration by accounting for partial absorption and reflection at each side of the room. The paper first derives a closed form expression of the temporal-spatial virus concentration. It then considers the deployment of a receiver composed of an air sampler and a bio-sensor to detect the viral existence of a specific virus. We, therefore, assess the detection capabilities of the proposed system via evaluating the viral miss-detection probability as a function of the sampling volume and the detection time-instance at the receiver side. Our numerical simulations verify the validity of the analytical results, and illustrate the ability of the proposed system to detect viruses in indoor environments. The results further characterize the impacts of several system parameters on the miss-detection probability.

eess.SP↗

arXiv2020

What should 6G be?

The standardization of fifth generation (5G) communications has been completed, and the 5G network should be commercially launched in 2020. As a result, the visioning and planning of sixth generation (6G) communications has begun, with an aim to provide communication services for the future demands of the 2030s. Here we provide a vision for 6G that could serve a research guide in the post-5G era. We suggest that human-centric mobile communications will still be the most important application of 6G and the 6G network should be human centric. Thus, high security, secrecy, and privacy should be key features of 6G and should be given particular attention by the wireless research community. To support this vision, we provide a systematic framework in which potential application scenarios of 6G are anticipated and subdivided. We subsequently define key potential features of 6G and discuss the required communication technologies. We also explore the issues beyond communication technologies that could hamper research and deployment of 6G.

cs.NI↗

arXiv2020

Exploiting Randomly-located Blockages for Large-Scale Deployment of Intelligent Surfaces

One of the promising technologies for the next generation wireless networks is the reconfigurable intelligent surfaces (RISs). This technology provides planar surfaces the capability to manipulate the reflected waves of impinging signals, which leads to a more controllable wireless environment. One potential use case of such technology is providing indirect line-of-sight (LoS) links between mobile users and base stations (BSs) which do not have direct LoS channels. Objects that act as blockages for the communication links, such as buildings or trees, can be equipped with RISs to enhance the coverage probability of the cellular network through providing extra indirect LoS-links. In this paper, we use tools from stochastic geometry to study the effect of large-scale deployment of RISs on the performance of cellular networks. In particular, we model the blockages using the line Boolean model. For this setup, we study how equipping a subset of the blockages with RISs will enhance the performance of the cellular network. We first derive the ratio of the blind-spots to the total area. Next, we derive the probability that a typical mobile user associates with a BS using an RIS. Finally, we derive the probability distribution of the path-loss between the typical user and its associated BS. We draw multiple useful system-level insights from the proposed analysis. For instance, we show that deployment of RISs highly improves the coverage regions of the BSs. Furthermore, we show that to ensure that the ratio of blind-spots to the total area is below 10^5, the required density of RISs increases from just 6 RISs/km2 when the density of the blockages is 300 blockage/km^2 to 490 RISs/km^2 when the density of the blockages is 700 blockage/km^2.

cs.IT↗

arXiv2020

Accurate Closed-Form Approximations to Channel Distributions of RIS-Aided Wireless Systems

This paper proposes highly accurate closed-form approximations to channel distributions of two different reconfigurable intelligent surface (RIS)-based wireless system setups, namely, dual-hop RIS-aided (RIS-DH) scheme and RIS-aided transmit (RIS-T) scheme. Differently from previous works, the proposed approximations reveal to be very tight for arbitrary number $N$ of reflecting metasurface's elements. Our findings are then applied to the performance analysis of the considered systems, in which the outage probability, bit error rate, and average channel capacity are derived. Results show that the achievable diversity orders $G_d$ for RIS-DH and RIS-T schemes are $N-1<G_d<N$ and $N$, respectively. Furthermore, it is revealed that both schemes can not provide the multiplexing gain and only diversity gains are achieved. For the RIS-DH scheme, the channels are similar to the keyhole multiple-input multiple-output (MIMO) channels with only one degree of freedom, while the RIS-T scheme is like the transmit diversity structure.

cs.IT↗

arXiv2020

Throughput Maximization of Mixed FSO/RF UAV-aided Mobile Relaying with a Buffer

In this paper, we consider an unmanned aerial vehicle (UAV) aided mobile relaying system under a buffer constraint. We propose a new relaying protocol employing mixed free-space optical/radio frequency (FSO/RF) communication, i.e., the source-relay and relay-destination links utilize FSO and RF links, respectively, under the buffer constraint at the UAV relay node. Taking the conditions of an imbalance in transmission rate between RF and FSO links into consideration, we study the trajectory optimization problem of buffer-constrained UAV relay node in order to maximize the end-to-end data throughput. Especially, we classify two relaying transmission schemes according to the delay requirements, i.e., i) delay-limited transmission and ii) delay-tolerant transmission. We solve the locally optimal trajectory problem of the UAV to maximize the throughput of ground user terminal. As a result, we propose an iterative algorithm that efficiently finds a local optimum solution for the throughput maximization problems. Through this algorithm, we present the resulting trajectories over the the atmospheric condition, the buffer size, and the delay requirement. Also, we show the optimum buffer size and the throughput-delay tradeoff for a given system. Our numerical results validate that the proposed buffer-aided mobile relaying scheme achieves 65.55% throughput gains compared to conventional static relaying scheme.

cs.IT↗

arXiv2020

Relay Assisted OFDM with Subcarrier Number Modulation in Multi-Hop Cooperative Networks

Orthogonal frequency-division multiplexing (OFDM) with subcarrier number modulation (OFDM-SNM) manifests its superior nature of high spectral efficiency (SE) and low complexity for signal estimation. To exploit the spatial gain of OFDM-SNM, we propose a relay assisted OFDM-SNM scheme for multi-hop cooperative systems in this letter. It is stipulated that a relay operated by decode-and-forward (DF) and half-duplex (HD) protocols exists in each hop. We analyze the outage performance of the relay assisted OFDM-SNM system. The average outage probability is approximated in closed form. Moreover, to reveal the diversity and coding gains of relay assisted OFDM-SNM, we explore the asymptotic outage performance at high signal-to-noise ratio (SNR) by power series expansion. To verify the improvement on outage performance and energy efficiency, we carry out the comparison among different multi-hops systems with traditional OFDM-SNM fixing a certain distance from source to destination. Simulation results corroborate the derived outage probabilities and provide insight into the proposed system in this letter.

eess.SP↗

arXiv2020

Performance Analysis of Dual-Hop Underwater Wireless Optical Communication Systems over Mixture Exponential-Generalized Gamma Turbulence Channels

In this work, we present a unified framework for the performance analysis of dual-hop underwater wireless optical communication (UWOC) systems with amplify-and-forward fixed gain relays in the presence of air bubbles and temperature gradients. Operating under either heterodyne detection or intensity modulation with direct detection, the UWOC is modeled by the unified mixture Exponential-Generalized Gamma distribution that we have proposed based on an experiment conducted in an indoor laboratory setup and has been shown to provide an excellent fit with the measured data under the considered lab channel scenarios. More specifically, we derive the cumulative distribution function (CDF) and the probability density function of the end-to-end signal-to-noise ratio (SNR) in exact closed-form in terms of the bivariate Fox's H function. Based on this CDF expression, we present novel results for the fundamental performance metrics such as the outage probability, the average bit-error rate (BER) for various modulation schemes, and the ergodic capacity. Additionally, very tight asymptotic results for the outage probability and the average BER at high SNR are obtained in terms of simple functions. Furthermore, we demonstrate that the dual-hop UWOC system can effectively mitigate the short range and both temperature gradients and air bubbles induced turbulences, as compared to the single UWOC link. All the results are verified via computer-based Monte-Carlo simulations.

cs.IT↗

arXiv2020

Performance Evaluation of UAV-enabled Cellular Networks with Battery-limited Drones

Unmanned aerial vehicles (UAVs) can be used as flying base stations (BSs) to offload Macro-BSs in hotspots. However, due to the limited battery on-board, UAVs can typically stay in operation for less than 1.5 hours. Afterward, the UAV has to fly back to a dedicated charging station that recharges/replaces the UAV's battery. In this paper, we study the performance of a UAV-enabled cellular network while capturing the influence of the spatial distribution of the charging stations. In particular, we use tools from stochastic geometry to derive the coverage probability of a UAV-enabled cellular network as a function of the battery size, the density of the charging stations, and the time required for recharging/replacing the battery.

eess.SP↗

arXiv2020

Stochastic Geometry-based Analysis of LEO Satellite Communication Systems

This letter studies the performance of a low-earth orbit (LEO) satellite communication system where the locations of the LEO satellites are modeled as a binomial point process (BPP) on a spherical surface. In particular, we study the user coverage probability for a scenario where satellite gateways (GWs) are deployed on the ground to act as a relay between the users and the LEO satellites. We use tools from stochastic geometry to derive the coverage probability for the described setup assuming that LEO satellites are placed at n different altitudes, given that the number of satellites at each altitude ak is Nk for all k. To resemble practical scenarios where satellite communication can play an important role in coverage enhancement, we compare the performance of the considered setup with a scenario where the users are solely covered by a fiber-connected base station (referred to as anchored base station or ABS in the rest of the paper) at a relatively far distance, which is a common challenge in rural and remote areas. Using numerical results, we show the performance gain, in terms of coverage probability, at rural and remote areas when LEO satellite communication systems are adopted. Finally, we draw multiple system-level insights regarding the density of GWs required to outperform the ABS, as well as the number of LEO satellites and their altitudes.

cs.IT↗

arXiv2020

High-Dimensional Quadratic Discriminant Analysis under Spiked Covariance Model

Quadratic discriminant analysis (QDA) is a widely used classification technique that generalizes the linear discriminant analysis (LDA) classifier to the case of distinct covariance matrices among classes. For the QDA classifier to yield high classification performance, an accurate estimation of the covariance matrices is required. Such a task becomes all the more challenging in high dimensional settings, wherein the number of observations is comparable with the feature dimension. A popular way to enhance the performance of QDA classifier under these circumstances is to regularize the covariance matrix, giving the name regularized QDA (R-QDA) to the corresponding classifier. In this work, we consider the case in which the population covariance matrix has a spiked covariance structure, a model that is often assumed in several applications. Building on the classical QDA, we propose a novel quadratic classification technique, the parameters of which are chosen such that the fisher-discriminant ratio is maximized. Numerical simulations show that the proposed classifier not only outperforms the classical R-QDA for both synthetic and real data but also requires lower computational complexity, making it suitable to high dimensional settings.

cs.LG↗

arXiv2020

Signal Shaping for Non-Uniform Beamspace Modulated mmWave Hybrid MIMO Communications

This paper investigates adaptive signal shaping methods for millimeter wave (mmWave) multiple-input multiple-output (MIMO) communications based on the maximizing the minimum Euclidean distance (MMED) criterion. In this work, we utilize the indices of analog precoders to carry information and optimize the symbol vector sets used for each analog precoder activation state. Specifically, we firstly propose a joint optimization based signal shaping (JOSS) approach, in which the symbol vector sets used for all analog precoder activation states are jointly optimized by solving a series of quadratically constrained quadratic programming (QCQP) problems. JOSS exhibits good performance, however, with a high computational complexity. To reduce the computational complexity, we then propose a full precoding based signal shaping (FPSS) method and a diagonal precoding based signal shaping (DPSS) method, where the full or diagonal digital precoders for all analog precoder activation states are optimized by solving two small-scale QCQP problems. Simulation results show that the proposed signal shaping methods can provide considerable performance gain in reliability in comparison with existing mmWave transmission solutions.

eess.SP↗

arXiv2020

Statistical Modeling of the Impact of Underwater Bubbles on an Optical Wireless Channel

In underwater wireless optical communications (UWOC), the random obstruction of light propagation by air bubbles can cause fluctuations in the incoming light intensity of a receiver. In this paper, we propose a statistical model for determining the received power by a receiver in the presence of air bubbles. First, based on real experiments of the behavior of air bubbles underwater, we propose statistical models for the generation, size, and horizontal distribution of each air bubble. Second, we mathematically derive the obstruction caused by the shadow of each bubble as it passes over the beam area. We then compute the combined obstruction of all generated air bubbles to determine the total obstructed power, which is a random variable due to the randomness of bubble behavior. Next, we find the first and second moments of the total obstructed power to model the statistical distribution of the obstructed received power by using the method of moments, which shows that the Weibull distribution suitably matches the simulation data. We also estimate the shape and scale parameters by using two derived moments. Furthermore, we also construct a statistical model of the received power with complete blockage in the presence of air bubbles and we derive the distribution of the composite channel model combining the proposed bubble-obstruction model with a Gamma-Gamma turbulence model. Finally, we obtain and verify the analytic forms of the average bit error rate and the capacity of UWOC systems under this newly proposed composite channel model.

cs.IT↗

arXiv2020

Performance Analysis and Optimization of Cooperative Satellite-Aerial-Terrestrial Systems

Aerial relays have been regarded as an alternative and promising solution to extend and improve satellite-terrestrial communications, as the probability of line-of-sight transmissions increases compared with adopting terrestrial relays. In this paper, a cooperative satellite-aerial-terrestrial system including a satellite transmitter (S), a group of terrestrial receivers (D), and an aerial relay (R) is considered. Specifically, considering the randomness of S and D and employing stochastic geometry, the coverage probability of R-D links in non-interference and interference scenarios is studied, and the outage performance of S-R link is investigated by deriving an approximated expression for the outage probability. Moreover, an optimization problem in terms of the transmit power and the transmission time over S-R and R-D links is formulated and solved to obtain the optimal end-to-end energy efficiency for the considered system. Finally, some numerical results are provided to validate our proposed analysis models, as well as to study the optimal energy efficiency performance of the considered system.

eess.SP↗

arXiv2020

On the Secrecy of UAV Systems With Linear Trajectory

By observing the fact that moving in a straight line is a common flying behavior of unmanned aerial vehicles (UAVs) in normal applications, e.g., power line inspections, and air patrols along with highway/streets/borders, in this paper we investigate the secrecy outage performance of a UAV system with linear trajectory, where a UAV ($S$) flies in a straight line and transmits its information over the downlink to a legitimate receiver ($D$) on the ground while an eavesdropping UAV ($E$) trying to overhear the information delivery between $S$ and $D$. Meanwhile, some information is delivered to $S$ over the uplink from $D$, such as commanding messages to control $S$'s detecting operations, which can also be eavesdropped by $E$. The locations of $S$, $D$, and $E$ are randomly distributed. We first characterize the statistical characteristics (including cumulative distribution functions and probability density function) of the received signal-to-noise ratio over both downlink and uplink, and then the closed-form analytical expressions for the lower boundary of the secrecy outage probability of both downlink and uplink have also been derived accordingly. Finally, Monte-Carlo simulations are given to testify our proposed analytical models.

eess.SP↗