arXiv subjects

Muamer Kadic

Publications and source records attributed to Muamer Kadic.

At least 19 recordsLinked to original sources

arXiv2026

Nonreciprocal topological kink-wave propagation in mechanical metamaterials

Nonlinear mechanical metamaterials can exhibit emergent transport phenomena that mimic topological protection without relying on linear band topology. Here, we realize a bifurcation-induced nonreciprocal lattice that supports robust propagation of elastic kink waves. Each unit is a prestrained, hinged-beam circulator that develops angular momentum bias during snap-through transitions between buckling states, producing an effective breaking of time reversal symmetry. Coupling such units into a hexagonal array yields a mechanically chiral network where localized soliton-like excitations propagate unidirectionally along interfaces and edges, immune to sharp bends. We demonstrate non-dispersive kink transport governed by a SineGordon type field whose effective bias encodes mechanical chirality. This framework bridges bifurcation dynamics and nonreciprocal transport, establishing a nonlinear route toward topological like mechanical functionality without magnetic or gyroscopic bias.

cond-mat.mtrl-sci↗

arXiv2026

Gear-based 3D-printed Micromachines Actuated by Optical Tweezers

The miniaturization of mechanical mechanisms is crucial to enable the development of compact, high-performance micromachines. However, the downscaling actuation of conventional gears and micromotors has remained limited by the inherent challenges of implementing mechanical/electrical powering. Here, we present the design, fabrication, and characterization of an optomechanical, gear-driven micromachine realized through two-photon polymerization 3D printing. The actuation is achieved using optical tweezers. The device integrates a microgear transmission system with an optically actuated part, enabling light-controlled micromachines. When illuminated by a highly focused laser source, the first gear generates rotational torque within the gear assembly, converting optical energy into directional mechanical work that can be transmitted to the coupled gear. We demonstrate the fabrication of micromachines using two-photon polymerization (2PP) laser writing, enabling the fabrication of spur gear trains and bevel gears that can produce out-of-plane rotations, which is not achievable with traditional micromachining fabrication techniques. The micromachines are composed of a single gear or a train of two or three gears without any unwanted adhesion between the components, leading to functioning systems. Experimentally, the fabricated micromachines were actuated using optical tweezers, demonstrating continuous gear rotation, effective motion transmission in gear trains, out-of-plane rotations, and the ability to amplify velocity or torque. Optical-tweezer actuation broadens the potential applications of these micromachines, particularly in biomedical and lab-on-a-chip systems, where precise, minimally invasive control at the microscale is essential.

physics.optics↗

arXiv2025

Metamaterials and Fluid Flows

Understanding and controlling the dynamic interactions between fluid flows and solid materials and structures-a field known as fluid-structure interaction -is central not only to established disciplines such as aerospace and naval engineering but also to emerging technologies such as energy harvesting, soft robotics, and biomedical devices. In recent years, the advent of metamaterials-rationally designed composites with properties beyond their constituents, often not found in conventional materials-has provided exciting opportunities for rethinking and redesigning fluid-structure interaction. The premise of engineering the internal structure of materials interfacing with fluid flows is opening a new horizon for precise and effective manipulation and control of coupled fluidic, acoustic, and elastodynamics responses. This review focuses on this relatively unexplored interdisciplinary theme with broad real-world technological significance. Key performance metrics, such as fuel consumption of transport systems, efficiency of renewable energy extraction, mitigation of noise emissions, and resilience to structural fatigue, depend on the control of interactions between flow, acoustic, and vibration mechanisms. Flow control, for example, which spans a wealth of regimes such as laminar, transitional, turbulent, and unsteady separated flows, is highly influenced by the ability to tailor fluid-structure interaction behavior. We survey and discuss theoretical frameworks that describe the interplay between fluids and elastic solids, with a focus on contemporary work and emerging concepts. The paper is organised into three main sections-flow-structure interactions, acoustic-structure interactions, and exotic metamaterial concepts with potential impact on fluid-structure interaction-and concludes with perspectives on current challenges and future directions in this rapidly expanding area of research.

cond-mat.soft↗

arXiv2025

On the Practicability of Ceramic-Tiled Walls for Sound Absorption by Tuning Cavities

We present the practicality of structuring ceramic tiles for enhancing sound absorption on rigid walls. The cornerstone of our methodology is to structure walls with cavities so that walls effectively behave as heterogeneous absorbing surfaces over a large frequency bandwidth. Using this approach, ceramic tiled walls are developed by integrating tuned cavity structures based on Helmholtz resonators. Such a design leverages the empty joints between tiles to form resonator necks, while the space between the ceramic tiles and the wall acts as the resonator chambers. By arranging these resonators in a spatially graded array, we achieve broadband sound absorption which targets low-frequency noise generated by impacts, footsteps and ambient sources. This makes the system highly suitable for practical architectural applications. The study encompasses the entire process, from numerical modeling and analytical formulation to the fabrication and mounting of resonant tiles, followed by experimental validation, clearly demonstrating the effectiveness of the proposed solution in real-world conditions. The findings highlight the strong potential of this approach for practical tiled room acoustic treatment and noise mitigation.

physics.app-ph↗

arXiv2025

Space-Time Elastic Metamaterials for Zero-Frequency and Zero-Wavenumber Bandgaps

We create wave-matter space-time metamaterials using optical trapping forces to manipulate mass-spring chains and create zero-frequency and zero-wavenumber band gaps: the bosonic nature of phonons, and hence this elastodynamic setting, traditionally prohibits either zero-frequency or zero-wavenumber band gaps. Here, we generate zero-frequency gaps using optomechanical interactions within a 3D mass-spring chain by applying an optical trapping force to hold or manipulate a mass in a contactless manner independent of its elastodynamic excitations. Through careful modification of the geometrical parameters in the trapped monoatomic mass-spring chain, we demonstrate the existence of a zero-frequency gap generated by the optical forces on the masses. The precise control we have over the system allows us to drive another set of masses and springs out of phase with its traveling wave thereby creating a zero-wavenumber band gap.

physics.optics↗

arXiv2025

Controlling the Propagation of Flexural Elastic Waves With Ceramic Metatiles

In this work, we examine the application of phononic metamaterials for elastic impact noise insulation in tiled flooring, through the development of an innovative ceramic metatile that incorporates phononic crystals with optimized joint configurations. First, we optimize the geometrical and material parameters of the proposed metatile, which is composed of small ceramic subtiles connected by silicon joints, in order to reduce longitudinal and flexural wave propagation on tiled floors, which are responsible for noise vibrations in tiled environments. A bandgap is achieved that effectively suppresses the transmission of impact noise through the periodic structural configuration. For flexural waves, the ceramic metatile exhibits a pronounced attenuation of wave transmission in the range of $500$-$1900$ Hz along the $[100]$ direction, and $500$-$1400$ Hz along the $[110]$ direction. For longitudinal waves, a broad bandgap is observed, spanning from $400$ Hz to $1950$ Hz in both the $[100]$ and $[110]$ directions. Additionally, the bandgaps shift toward lower frequencies with increasing width of the subtiles and silicon joints, or with a decrease in the Young's modulus of the silicon. In both experimental and numerical tests, it is demonstrated that the integration of silicon joints inside the ceramic metatile improves the acoustic insulation performance, as measured by the reduction of impact noise levels across a wide range of low frequencies. The findings highlight the potential of metamaterials in architectural acoustics, offering innovative solutions for elastic wave control in tiled environments.

physics.app-ph↗

arXiv2025

Shape Morphing Metamaterials

Mechanical metamaterials leverage geometric design to achieve unconventional properties, such as high strength at low density, efficient wave guiding, and complex shape morphing. The ability to control shape changes builds on the complex relationship between geometry and nonlinear mechanics, and opens new possibilities for disruptive technologies across diverse fields, including wearable devices, medical technology, robotics, and beyond. In this review of shape-morphing metamaterials, we examine the current state of the field and propose a unified classification system for the mechanisms involved, as well as the design principles underlying them. Specifically, we explore two main categories of unit cells-those that exploit structural anisotropy or internal rotations-and two potential approaches to tessellating these cells: based on kinematic compatibility or geometric frustration. We conclude by discussing the available design tools and highlighting emerging challenges in the development of shape-morphing metamaterials.

physics.app-ph↗

arXiv2024

Unconventional superconductivity in magic-strain graphene superlattices

Extensive investigations on the Moir\'e magic-angle have been conducted in twisted bilayer graphene, unlocking the mystery of unconventional superconductivity and insulating states. In analog to magic angle, here we demonstrate the new concept of magic-strain in graphene systems by judiciously tailoring mechanical relaxation (stretch and compression) which is easier to implement in practice. We elucidate the interplay of strain-induced effects and delve into the resulting unconventional superconductivity or semimetal-insulator transition in relaxation-strained graphene, going beyond the traditional twisting approach. Our findings reveal how relaxation strain can trigger superconducting transitions (with an ultra-flat band at the Fermi level) or the semimetal-insulator transition (with a gap opening at the $K$ point of $0.39\rm{~eV}$) in both monolayer and bilayer graphene. These discoveries open up a new branch for correlated phenomena and provide deeper insights into the underlying physics of superconductors, which positions graphene as a highly tunable platform for novel electronic applications.

cond-mat.mes-hall↗

arXiv2024

Optical chiral microrobot for out-of-plane rotation

Optical microrobots (OPTOBOTs) have garnered significant interest, particularly in the medical field, due to their potential for precise cell manipulation in various biological studies and microsurgical applications. Previously described OPTOBOTs demonstrate multiple degrees of freedom, yet improvements are needed, especially in achieving reliable out-of-plane rotation. Here, we propose an OPTOBOT design based on chirality that enables full-cycle out-of-plane rotations using optical tweezers. The OPTOBOT has an arrow-like structure with two handles aligned on the same axis, maintaining its horizontal orientation and facilitating controlled movement. Additionally, the OPTOBOT's tail is a chiral helix, which induces repetitive out-of-plane rotations around its longer axis when targeted by a laser beam that is due to broken axial parity. Finite element analysis is employed to design the OPTOBOT and assess its capacity to generate mono-directional high optical torque. Experimental results confirm various actuation modes, supporting future integration of OPTOBOTs in complex micromanipulation tasks.

physics.optics↗

arXiv2023

Clay metaBrick-based motif to enhance thermal and acoustic insulation

Acoustic metamaterials have gained popularity as promising materials for enhancing noise reduction. Here, we explore the use of metamaterials, based on Helmholtz resonators (HRs), to enhance the performance of standard clay hollow brick. By incorporating HRs in the upper and lower hollows, we transform the standard brick into metaBrick, which is essentially designed based on metamaterial principles. We evaluate the acoustic and thermal performance of walls constructed with clay metaBricks, focusing on sound transmission loss and heat resistance. Both the finite element method and experimental analysis were employed to highlight the performance of metaBricks compared to standard clay bricks. Results show that metaBricks significantly enhance acoustic and thermal insulation, achieving an attenuation of $20$ \si{dB} across a broad frequency range from $500$ to $2500$ \si{Hz} and an $8$\% increase in thermal resistance. However, compressive strength is reduced by $33$\%, though it remains above the standard requirements for building materials. These findings indicate that metaBrick is a promising building material, offering improved sound and thermal insulation.

cond-mat.mtrl-sci↗

arXiv2023

Pumping with Symmetry

Re-configurable materials and meta-materials can jump between space symmetry classes during their deformations. Here, we introduce the concept of singular symmetry enhancement, which refers to an abrupt jump to a higher symmetry class accompanied by an un-avoidable reduction in the number of dispersion bands of the excitations of the material. Such phenomenon prompts closings of some of the spectral resonant gaps along singular manifolds in a parameter space. In this work, we demonstrate that these singular manifolds can carry topological charges. As a concrete example, we show that a deformation of an acoustic crystal that encircles a p11g-symmetric configuration of an array of cavity resonators results in an adiabatic cycle that carries a Chern number in the bulk and displays Thouless pumping at the edges. This points to a very general guiding principle for recognizing cyclic adiabatic processes with high potential for topological pumping in complex materials and meta-materials, which rests entirely on symmetry arguments.

cond-mat.mtrl-sci↗

arXiv2023

Polarization State Conversion through Chiral Butterfly Meta-Structure

The recent emergence of chirality in mechanical metamaterials has revolutionized the field, enabling achievements in wave propagation and polarization control. Despite being an intrinsic feature of some molecules and ubiquitous in our surroundings, the incorporation of chirality into mechanical systems has only gained widespread recognition in the last few years. The extra degrees of freedom induced by chirality has propelled the study of systems to new heights, leading to a better understanding of the physical laws governing these systems. In this study, we present a structural design of a butterfly meta-structure that exploits the chiral effect to create a 3D chiral butterfly capable of inducing a rotation of 90{\deg} in the plane of polarization, enabling a switch between various polarization states within a solid material. Furthermore, our numerical investigation using Finite Element Analysis (FEA) has revealed an unexpected conversion of compressional movement to transverse movement within these structures, further highlighting the transformative potential of chirality in mechanical metamaterials. Thus, revealing an additional degree of freedom that can be manipulated, namely the polarization state.

cond-mat.mes-hall↗

arXiv2023

The emergence of low-frequency dual Fano resonances in chiral twisting metamaterials

In the current work, through a finite element analysis, we demonstrate that a configuration of chiral cells having syndiotactic symmetry provides dual Fano resonances at low frequency. From the phononic dispersion and transmission response, we compare the signature provided by a composite made of chiral cells to the ones of homogeneous medium, isotactic nonchiral, and isotactic chiral beams. The study results in an innovative design of a mechanical metamaterial that induces the Fano resonance at low frequency with a relatively high quality factor. This might be a significant step forward for mechanical wave filtering and detection. Performances have been evaluated using a sensor that will be implemented as a thermometer.

physics.app-ph↗

arXiv2023

Additive 3D photonic integration that is CMOS compatible

Today, continued miniaturization in electronic integrated circuits (ICs) appears to have reached its fundamental limit. At the same time, energy consumption due by communication becomes the dominant limitation in high performance electronic ICs for computing, and modern computing concepts such a neural networks further amplify the challenge. Photonic communication is a promising strategy to address the second, while adding a third dimension to the predominantly two dimensional integrated circuits appears the most promising future strategy for further IC architecture improvement. Crucial for efficient electronic-photonic co-integration is CMOS compatibility. Here, we review our latest results obtained in the FEMTO-ST RENATECH facilities on using additive photo-induced polymerization of a standard photo-resin for truly 3D photonic integration according to these principles. Based on one- and two-photon polymerization and combined with direct-laser writing, we 3D-printed air- and polymer-cladded photonic waveguides. An important application of such circuits are the interconnects of optical neural networks, where 3D integration enables scalability in terms of network size versus its geometric dimensions. In particular via \emph{flash}-TPP, a fabrication process combining blanket one- and high-resolution two-photon polymerization, we demonstrated polymer-cladded step-index waveguides with up to 6~mm length, low insertion ($\sim$0.26~dB) and propagation ($\sim$1.3~dB/mm) losses, realized broadband and low loss ($\sim$0.06~dB splitting losses) adiabatic 1 to M couplers as well as tightly confining air-cladded waveguides for denser integration. By stably printing such integrated photonic circuits on standard semiconductor samples, we show the concept's CMOS compatibility. With this, we lay out a promising, future avenue for scalable integration of hybrid photonic and electronic components.

physics.optics↗

arXiv2022

Variable Dual Auxeticity of the Hierarchical Mechanical Metamaterial composed of Re-entrant Structural Motifs

In this work, a novel hierarchical mechanical metamaterial is proposed that is composed of re-entrant truss-lattice elements. It is shown that this system can deform very differently and can exhibit a versatile extent of the auxetic behaviour depending on a small change in the thickness of its hinges. In addition, depending on which hierarchical level is deforming, the whole structure can exhibit a different type of auxetic behaviour that corresponds to a unique deformation mechanism. This results in a dual auxetic structure where the interplay between the two auxetic mechanisms determines the evolution of the system. It is also shown that depending on the specific deformation pattern, it is possible to observe a very different behaviour of the structure in terms of frequencies of waves that can be transmitted through the system. In fact, it is demonstrated that even a very small change in the parametric design of the system may result in a significantly different band gap formation that can be useful in the design of tunable vibration dampers or sensors. The possibility of controlling the extent of the auxeticity also makes the proposed metamaterial to be very appealing from the point of view of protective and biomedical devices.

physics.app-ph↗

arXiv2022

Longitudinal-Twist Wave Converter based on Chiral Metamaterials

Advances in material architectures have enabled endowing materials with exotic attributes not commonly available in the conventional realm of mechanical engineering. Twisting, a mechanism whereby metamaterials are used to transform static axial load into twist motion, is of particular interest to this study. Herein, computations based on the finite element method, corroborated by an analytical approach derived from applying Lagrange's equations to a monoatomic spring-mass system, are employed to explore the longitudinal-twist (L-T) conversion exhibited by a chiral tetragonal-beam metamaterial. Firstly, we perform an eigenvalue analysis taking into account the polarization states to highlight the potential contribution of the longitudinal mode in the L-T conversion. We contrast the twisting behavior of the chiral cell with that of other homogeneous medium, octagonal-tube, and non-chiral cells. Moreover, we demonstrate the influence of the cell's chirality on the L-T conversion using both time-domain and frequency-domain studies. The findings indicate that at least a portion of the longitudinally propagating wave is transformed into twist throughout a broad frequency range and even quasi-totally converted at distinct frequencies.

physics.app-ph↗

arXiv2022

Mapping of Elastic Properties of Twisting Metamaterials onto Micropolar Continuum using Static Calculations

Recent developments in the engineering of metamaterials have brought forth a myriad of mesmerizing mechanical properties that do not exist in ordinary solids. Among these, twisting metamaterials, acoustical chirality, or Willis coupling are sample-size dependent. The purpose of this work is, first, to examine the mechanical performance of a new twisting cubic metamaterial. Then, we perform a comparative investigation of its twisting behavior using the finite element method on microstructure elements computation, an analytical model, and we compare them to Eringen micropolar continuum. Notably, the results of the three models are in good qualitative and quantitative agreements. Finally, a systematic comparison of dispersion relations was made for the continuum and for the microstructures with different sizes in unit cells as final proof of perfect mapping.

physics.app-ph↗

arXiv2022

(3+1)D-printed adiabatic 1-to-N broadband couplers

We report single-mode 3D optical couplers leveraging adiabatic power transfer towards up to 4 output ports. We use the CMOS compatible additive (3+1)D \emph{flash}-TPP printing for fast and scalable fabrication. Coupling optical losses of such devices are reduced below $\sim$~0.06~dB by tailoring the coupling and waveguides geometry, and we demonstrate almost octave-spanning broadband functionality from 520~nm to 980~nm.

physics.optics↗