arXiv subjects

N. Kumar

Publications and source records attributed to N. Kumar.

At least 19 recordsLinked to original sources

arXiv2026

Measurement of isolated prompt photon production in $p$+$p$ collisions at $\sqrt{s} = 200$ GeV with the sPHENIX detector

The differential cross section of isolated prompt photon production is measured as a function of photon transverse energy ($E_{\mathrm{T}}^{\gamma}$) in proton--proton ($p$+$p$) collisions at $\sqrt{s} = 200$ GeV. The data were recorded in $2024$ with the sPHENIX detector at the Relativistic Heavy Ion Collider. Photons are reconstructed in $|\eta^{\gamma}| < 0.7$ and $12 < E_{\mathrm{T}}^{\gamma} < 32$ GeV using the electromagnetic calorimeter, and an isolation requirement is imposed using both the electromagnetic and hadronic calorimeters. The measured cross section is compared with the PYTHIA Monte Carlo event generator and perturbative quantum chromodynamics (pQCD) calculations at next-to-leading and next-to-next-to-leading order. The pQCD calculations are consistent with the result within the quoted uncertainties. This measurement provides a test of pQCD calculations for a process with sensitivity to the gluon parton distribution function of the proton and establishes the $p$+$p$ baseline for forthcoming sPHENIX measurements of isolated prompt photons in heavy-ion collisions.

nucl-ex↗

arXiv2026

The science of compressional heating on the LM26 magnetized target fusion experiment

The Lawson Machine 26 (LM26) at General Fusion has demonstrated compressional heating of a spherical tokamak deuterium plasma as it was compressed by an imploding solid lithium liner. Results from the first 11 compression shots on LM26 are presented, the highest-performing of which show more than a 3x increase in $T_e$, a 10x increase in $n_e$, and a 10x increase in $B_{pol}$ within the plasma driven by 3x radial compression. The experimental device and instrumentation are reviewed in detail, followed by observations about the liner trajectory and evolution of plasma properties, including increases in emission of neutrons, X-rays, and visible radiation. Observations from fast-camera images during compression provide context for interpreting the spatial structure of plasma-wall interaction. Overviews of relevant models and analysis are presented. Diagnostic data are used to reconstruct the experimental equilibrium state in computational framework as a function of time. The results build confidence in the stability and transport analyses that support the primary conclusions. Trends across the full set of 11 compression shots are presented, and detailed examinations of the high-performance shots are given individually. The central conclusions of the integrated physics model specifically indicate that compressional heating was achieved in this set of experiments, as evidenced by the balance of heating power from compression, Ohmic heating from plasma current, and losses to the boundary needed to match the experimental data. A majority of the temperature rise is attributable to compressional heating. An increase in neutron flux is also observed during compression. The results provide a basis for planned improvements to the LM26 facility that will enable the compression of magnetized plasma to increasingly higher densities and temperatures.

physics.plasm-ph↗

arXiv2026

Performance of the Particle-Identification Silicon-Telescope Array Coupled with the VAMOS++ Magnetic Spectrometer

The Particle-Identification Silicon-Telescope Array (PISTA) is a new detection system designed for high-resolution studies of the fission process induced by multi-nucleon transfer in inverse kinematics. It is specifically optimized for experiments with the VAMOS++ magnetic spectrometer at GANIL (Grand Acc\'el\'erateur National d'Ions Lourds). The array comprises eight trapezoidal $\Delta$E-E silicon telescopes arranged in a corolla configuration. Each telescope integrates two single-sided stripped silicon detectors, enabling target-like recoil identification, energy loss measurements, and trajectory reconstruction. Positioned in close proximity to the target, PISTA's compact geometry achieves high-efficiency tracking of target-like recoils produced in multi-nucleon transfer reactions at Coulomb barrier energies. The spatial segmentation of the array allows precise determination of the mass and charge of the target-like nucleus, and excitation energy of fissioning systems. This work presents the particle identification and excitation energy reconstruction performances for the interactions of $^{238}$U beam with $^{12}$C target. An excitation energy resolution of 800 keV (FWHM) was determined together with mass resolution of 1.1% (FWHM). The combination of PISTA and VAMOS++ magnetic spectrometer enables unprecedented investigations of the fission process as a function of the excitation energy of the fissioning nucleus, particularly for exotic systems produced in transfer-induced reactions.

physics.ins-det↗

arXiv2025

LoRA-fine-tuned Large Vision Models for Automated Assessment of Post-SBRT Lung Injury

This study investigates the efficacy of Low-Rank Adaptation (LoRA) for fine-tuning large Vision Models, DinoV2 and SwinV2, to diagnose Radiation-Induced Lung Injury (RILI) from X-ray CT scans following Stereotactic Body Radiation Therapy (SBRT). To evaluate the robustness and efficiency of this approach, we compare LoRA with traditional full fine-tuning and inference-only (no fine-tuning) methods. Cropped images of two sizes (50 mm3 and 75 mm3), centered at the treatment isocenter, in addition to different adaptation techniques for adapting the 2D LVMs for 3D data were used to determine the sensitivity of the models to spatial context. Experimental results show that LoRA achieves comparable or superior performance to traditional fine-tuning while significantly reducing computational costs and training times by requiring fewer trainable parameters.

cs.CV↗

arXiv2025

Evidence for magnetoelastic coupling and chiral magnetic ground state in quasi-van der Waals tr-Cr$_{1.22}$Te$_{2}$

Trigonal tr-Cr$_{1+\delta}$Te$_{2}$ is a well-known ferromagnetic material that has recently drawn much attention due to the discovery of zero-field skyrmion state, unusual anomalous Hall effect, topological Hall effect, and topological Nernst effect. This quasi-van der Waals (vdW) layered material with intercalated Cr atoms possesses many peculiar features that depend on the amount of Cr intercalation, although the microscopic magnetic ground state is still elusive. We reveal the structural and magnetic properties of tr-Cr$_{1.22}$Te$_{2}$ by low-temperature x-ray diffraction, magnetization, temperature-dependent Raman spectroscopy, and single-crystal neutron diffraction studies. Magnetization measurements under small applied magnetic field indicate two successive magnetic transitions, one from a ferromagnetic (FM) state to an antiferromagnetic (AFM) state (T$_\mathrm{C}=197$ K), and second from AFM to a paramagnetic state (T$_\mathrm{N}=211$ K). The FM transition is sharp with a strong presence of magnetoelastic coupling, but is not accompanied by any structural phase transition. The magnetic structure obtained from zero-field single crystal neutron diffraction reveals that the Cr1 and Cr2 moments are ferromagnetically aligned along the c-axis, while the Cr3 and intercalated Cr4 atoms induce an AFM component in the ab-plane leading to an umbrella-like spin structure which possesses a finite spin chirality. The presence of a finite spin chirality is responsible for the observation of the topological Hall effect (THE).

cond-mat.str-el↗

arXiv2023

Current Tomography -- Localization of void fractions in conducting liquids by measuring the induced magnetic flux density

A novel concept of a measurement technology for the localization and determination of the size of gas bubbles is presented, which is intended to contribute to a further understanding of the dynamics of efficiency-reducing gas bubbles in electrolyzers. A simplified proof-of-concept (POC) model is used to numerically simulate the electric current flow through materials with significant differences in electrical conductivity. Through an automated approach, an extensive data set of electric current density and conductivity distributions is generated, complemented with determined magnetic flux densities in the surroundings of the POC cell at virtual sensor positions. The generated data set serves as testing data for various reconstruction approaches. Based on the measurable magnetic flux density, solving Biot-Savarts law inversely is demonstrated and discussed with a model-based solution of an optimization problem, of which the gas bubble locations are derived.

physics.flu-dyn↗

arXiv2023

Precise determination of quadrupole and hexadecapole deformation parameters of the $sd$-shell nucleus, $^{28}$Si

Quasi-elastic (QEL) scattering measurements have been performed using $^{28}$Si projectile off a $^{90}$Zr target at energies around the Coulomb barrier. A Bayesian analysis within the framework of coupled channels (CC) calculations is performed in a large parameter space of quadrupole and hexadecapole deformations ($\beta_{2}$ and $\beta_{4}$) of $^{28}$Si. Our results clearly show that $^{28}$Si is an oblate shaped nucleus with $\beta_{2}$=-$0.38 \pm 0.01$ which is in excellent agreement with electromagnetic probes. A precise value of hexadecapole deformation for $^{28}$Si, $\beta_{4}$=+$0.03 \pm 0.01$, along with a consistent value of quadrupole deformation has now been determined for the first time using QEL scattering. A remarkable agreement between the experimental $\beta_{4}$ value of $^{28}$Si and Skyrme-Hartree-Fock based calculations is obtained. The QEL results obtained previously for $^{24}$Mg (prolate) and the present result for $^{28}$Si (oblate) hereby affirm the strong sensitivity of the quasi-elastic scattering to ground state deformations, thus reinforcing its suitability as a potential probe for rare exotic nuclei.

nucl-ex↗

arXiv2022

Port-Hamiltonian Discontinuous Galerkin Finite Element Methods

A port-Hamiltonian (pH) system formulation is a geometrical notion used to formulate conservation laws for various physical systems. The distributed parameter port-Hamiltonian formulation models infinite dimensional Hamiltonian dynamical systems that have a non-zero energy flow through the boundaries. In this paper we propose a novel framework for discontinuous Galerkin (DG) discretizations of pH-systems. Linking DG methods with pH-systems gives rise to compatible structure preserving finite element discretizations along with flexibility in terms of geometry and function spaces of the variables involved. Moreover, the port-Hamiltonian formulation makes boundary ports explicit, which makes the choice of structure and power preserving numerical fluxes easier. We state the Discontinuous Finite Element Stokes-Dirac structure with a power preserving coupling between elements, which provides the mathematical framework for a large class of pH discontinuous Galerkin discretizations. We also provide an a priori error analysis for the port-Hamiltonian discontinuous Galerkin Finite Element Method (pH-DGFEM). The port-Hamiltonian discontinuous Galerkin finite element method is demonstrated for the scalar wave equation showing optimal rates of convergence.

math.AP↗

arXiv2021

Red blue $k$-center clustering with distance constraints

We consider a variant of the $k$-center clustering problem in $\Re^d$, where the centers can be divided into two subsets, one, the red centers of size $p$, and the other, the blue centers of size $q$, where $p+q=k$, and such that each red center and each blue center must be apart a distance of at least some given $\alpha \geq 0$, with the aim of minimizing the covering radius. We provide a bi-criteria approximation algorithm for the problem and a polynomial time algorithm for the constrained problem where all centers must lie on a given line $\ell$.

cs.CG↗

arXiv2021

Observation of pressure-induced Weyl state and superconductivity in a chirality-neutral Weyl semimetal candidate SrSi2

Quasi-particle excitations in solids described by the Weyl equation have attracted significant attention in recent years. Thus far, a wide range of solids that have been experimentally realized as Weyl semimetals (WSMs) lack either mirror or inversion symmetry. For the first time, in the absence of both mirror and inversion symmetry, SrSi2 has been predicted as a robust WSM by recent theoretical works. Herein, supported by first-principles calculations, we present systematic angle-resolved photoemission studies of undoped SrSi2 and Ca-doped SrSi2 single crystals. Our results show no evidence of the predicted Weyl fermions at the kz = 0 plane or the Fermi arcs on the (001) surface. With external pressure, the electronic band structure evolved and induced Weyl fermions in this compound, as revealed by first-principle calculations combined with electrical transport property measurements. Moreover, a superconducting transition was observed at pressures above 20 GPa. Our investigations indicate that the SrSi2 system is a good platform for studying topological transitions and correlations with superconductivity.

cond-mat.mtrl-sci↗

arXiv2021

Observation of the Critical State to Multiple-Type Dirac Semimetal Phases in KMgBi

Dirac semimetals (DSMs) are classified into different phases based on the types of the Dirac fermions. Tuning the transition among different types of the Dirac fermions in one system remains challenging. Recently, KMgBi was predicted to be located at a critical state that various types of Dirac fermions can be induced owing to the existence of a flat band. Here, we carried out systematic studies on the electronic structure of KMgBi single crystal by combining angle-resolve photoemission spectroscopy (ARPES) and scanning tunneling microscopy/spectroscopy (STM/STS). The flat band was clearly observed near the Fermi level. We also revealed a small bandgap of ~ 20 meV between the flat band and the conduction band. These results demonstrate the critical state of KMgBi that transitions among various types of Dirac fermions can be tuned in one system.

cond-mat.mtrl-sci↗

arXiv2021

Blockchain for Decentralized Multi-Drone to Combat COVID-19

Currently, drones represent a promising technology for combating Coronavirus disease 2019 (COVID-19) due to the transport of goods, medical supplies to a given target location in the quarantine areas experiencing an epidemic outbreak. Drone missions will increasingly rely on drone collaboration, which requires the drones to reduce communication complexity and be controlled in a decentralized fashion. Blockchain technology becomes a must in industrial applications because it provides decentralized data, accessibility, immutability, and irreversibility. Therefore, Blockchain makes data public for all drones and enables drones to log information concerning world states, time, location, resources, delivery data, and drone relation to all neighbors drones. This paper introduces decentralized independent multi-drones to accomplish the task collaboratively. Improving blockchain with a consensus algorithm can improve network partitioning and scalability in order to combat COVID-19. The multi-drones task is to combat COVID-19 via monitoring and detecting, social distancing, sanitization, data analysis, delivering goods and medical supplies, and announcement while avoiding collisions with one another. We discuss End to End (E2E) delivery application of combination blockchain and multi-drone in combating COVID-19 and beyond future pandemics. Furthermore, the challenges and opportunities of our proposed framework are highlighted.

cs.DC↗

arXiv2020

Cooling performance of a wick consisting of closely packed rods at moderately high heat loads

We propose a new class of wicks, consisting of closely packed circular rods, whose evaporative capacities have been measured at different heat loads ranging between 0.05W/cm^2 and 8W/cm^2. The experiments were performed with two different liquids, water and highly volatile pentane, in a specially designed setup to understand transient and steady state cooling characteristics of the proposed wicks. Heat interception and vapour release occur on the same side in these experiments. These wicks released ~50% of the supplied heat load as the latent heat; this value remained nearly constant between the explored heat loads. These wicks have the unique characteristic of potentially very high and rapid capillary rise induced by near-zero radii (NZR) of contacts formed between the rods in contact; liquid region reaching the end in NZR has been called corner meniscus. While the bulk liquid (present between three rods) may recede, depending on the heat load, the corner meniscus remains pinned; this unique feature thus leads to sustained high evaporation rate requirements. This remarkable characteristic seems advantageous compared to a regular wick, whose cooling performance depends on the heat loads. We also performed 3-D unsteady state numerical simulations to understand the effect of rod diameter and materials' thermal conductivity on the overall wick's performance. Steady state temperature value was in fairly good agreement with the ones measured in experiments. Based on the geometry of the corner film, fluid mechanics of liquid transport, and the heat transfer aspects, we present a design of suitable wicks as per the requirement. These new configurations can represent a separate class of wicks and may replace the regular wicks in current and futuristic cooling devices.

physics.flu-dyn↗

arXiv2019

Bulk single crystal growth of the theoretically predicted magnetic Weyl semimetals $R$AlGe ($R$ = Pr, Ce)

We explore two methods for single crystal growth of the theoretically proposed magnetic Weyl semimetals $R$AlGe ($R$ = Pr,Ce), which prove that a floating zone technique, being both crucible- and flux-free, is crucial to obtain perfectly stoichiometric $R$AlGe crystals. In contrast, the crystals grown by a flux growth technique tend to be Al-rich. We further present both structural and elemental analysis, along with bulk magnetization and electrical resistivity data on the crystals prepared by the floating zone technique. Both systems with the intended 1:1:1 stoichiometry crystallize in the anticipated polar I4$_{1}$md (No. 109) space group, although neither displays the theoretically expected ferromagnetic ground state. Instead PrAlGe displays a spin-glass-like transition below 16 K with an easy-c-axis and CeAlGe has an easy-ab-plane antiferromagnetic order below 5 K. The grown crystals provide an ideal platform for microscopic studies of the magnetic field-tunable correlation physics involving magnetism and topological Weyl nodes.

cond-mat.mtrl-sci↗

arXiv2019

Observation of Weyl nodes in robust type-II Weyl semimetal WP2

Distinct to type-I Weyl semimetals (WSMs) that host quasiparticles described by the Weyl equation, the energy dispersion of quasiparticles in type-II WSMs violates Lorentz invariance and the Weyl cones in the momentum space are tilted. Since it was proposed that type-II Weyl fermions could emerge from (W,Mo)Te2 and (W,Mo)P2 families of materials, a large numbers of experiments have been dedicated to unveil the possible manifestation of type-II WSM, e.g. the surface-state Fermi arcs. However, the interpretations of the experimental results are very controversial. Here, using angle-resolved photoemission spectroscopy supported by the first-principles calculations, we probe the tilted Weyl cone bands in the bulk electronic structure of WP2 directly, which are at the origin of Fermi arcs at the surfaces and transport properties related to the chiral anomaly in type-II WSMs. Our results ascertain that due to the spin-orbit coupling the Weyl nodes originate from the splitting of 4-fold degenerate band-crossing points with Chern numbers C = $\pm$2 induced by the crystal symmetries of WP2, which is unique among all the discovered WSMs. Our finding also provides a guiding line to observe the chiral anomaly which could manifest in novel transport properties.

cond-mat.mes-hall↗

arXiv2019

Role of microstructure and structural disorder on tribological properties of polycrystalline diamond films

Polycrystalline diamond films with systematic change in microstructure that varies from microcrystalline to nanocrystalline structure are synthesized on Si by hot filament chemical vapor deposition. The morphology and structural properties of the grown diamond films are analyzed using field emission scanning electron microscope (FESEM), atomic force microscope (AFM), X-ray diffraction and Raman spectroscopy. The average roughness and grain size of the diamond films decrease with increase in CH4 to H2 ratio from 0.5 to 3 %. Also, structural disorder in these diamond films increases with decrease in grain size as evidenced from Raman spectroscopy. The coefficient of friction (CoF) is found to be very low for all the films. However, the average CoF is found to increase from 0.011 +/-0.005 to 0.03 +/- 0.015 as the grain size decrease from ~ 1 micron down to ~20 nm. Post analysis of wear track by FESEM, AFM based nanoscale friction and Raman spectroscopy reveal that microcrystalline diamond undergoes shear induced amorphization with negligible wear rate while nanocrystalline diamond films undergo shear induced plastic deformation without amorphization. A comprehensive mechanism for the observed CoF is discussed in the framework of microstructure, structural disorder and shear induced tribo-chemical reactions at the sliding interface.

cond-mat.mtrl-sci↗

arXiv2018

Tribological Properties of Ultrananocrystalline Diamond Nanowire Thin Film: Influence of Sliding Ball Counterbodies

Ultrananocrystalline Diamond Nanowire (UNCD NW) thin film was deposited on mirror polished silicon substrate (100) using Microwave Plasma Enhanced Chemical Vapor Deposition (MPECVD) System with optimized deposition parameters in CH4 (6%)/N2 plasma media. The film exhibited wire like morphology with randomly oriented and homogeneously distributed ultranano diamond grains separated by an interphase boundary of graphitic and amorphous carbon (a-C) phases. Micro-tribological studies of film were carried out against Al2O3, SiC and steel balls in ambient atmospheric conditions. Initially, the friction coefficient was found to be high for UNCD NW/SiC and UNCD NW/Steel sliding pairs which gradually decreased to low value. While, in UNCD NW/Al2O3 sliding combination, the ultralow value of friction coefficient was maintained throughout the whole sliding process. High wear resistant properties of the film were observed in UNCD NW/SiC and UNCD NW/Steel pairs. In UNCD NW/Al2O3 case, ball counterbody showed negligible wear dimension. Such kind of tribological behavior was attributed to the different type of mechanical and chemical interactions of ball counterbodies with UNCD NW thin film.

physics.app-ph↗

arXiv2018

Theoretical and Simulation Study of 'Comb' Electron beam and THz generation

A compact accelerator based super-radiant THz source is under development at Inter University Accelerator Centre (IUAC), New Delhi. The facility is based on the principle of pre-bunched Free Electron Laser (FEL) which will produce THz radiation in the range of ~0.18 to 3 THz from a modulated electron beam. A photocathode electron gun will generate a short train of microbunches (a "comb" beam) driven by a fiber laser system capable of producing multi micro-pulse laser beam with variable separation ( "comb" laser pulse). Upon acceleration, the electron beam will be injected in to a compact undulator magnet tuned to the same frequency as the separation of the electron micro-bunches. The paper discusses the process of enhancement of super-radiant emission of radiation due to modulation in the comb beam and the conditions required to achieve maximum enhancement of the radiation power. The feasibility study of generating a comb beam at the photocathode and its transport through the beamline while preserving its temporal structure has been reported. To evaluate the characteristics of the radiation emitted from the comb beam, a C++ based particle tracker and Lienard-Wiechert field solver has been developed. The conceptual understanding of the emission of radiation from comb beam is shown to conform with the numerical results. The code has been used to calculate the radiation pulse energy emitted into the central cone of undulator for various comb beam configurations.

physics.acc-ph↗