Search arXiv⌕ Search

arXiv subjects

Nehal Afifi

Publications and source records attributed to Nehal Afifi.

8 recordsLinked to original sources

Uncertainty Aware Functional Behavior Prediction and Material Fatigue Assessment for Circular Factory

Returned products in circular factories re-enter production with heterogeneous degradation states, usage histories, and remaining capability. Reuse cannot be decided from the current inspection alone, because future function fulfillment and component integrity may evolve differently under the next service scenario. Existing PHM approaches support degradation prediction, but often target fixed operating conditions or isolated component benchmarks, while material-fatigue assessment is rarely linked to system-level functional prognosis. This paper addresses this gap for an angle grinder by combining uncertainty-aware functional prediction with component-level fatigue assessment in an instance-specific reliability workflow. The proposed framework combines the current tool state with recent force--torque usage windows. A convolutional encoder extracts loading patterns from spindle forces and shaft torque, and an LSTM backbone predicts nine functional variables as Gaussian mean and variance estimates. In parallel, the same loading history is translated into output-shaft fatigue information through finite-element-supported stress reconstruction, S--N/Miner damage evaluation with Haibach extension, and Paris-law crack-growth analysis. A streaming replay algorithm consolidates both branches into functional, material, and system reliability trajectories. Held-out tests show mean \(2\%\)-tolerance accuracy of 0.9652 across nine outputs. Thermal variables are predicted near-perfectly, while drive motor current and load speed remain the most demanding dynamic outputs, with \(R^2\) values of 0.9750 and 0.9924. Torque history is especially important for these variables, and the conventional LSTM outperforms GRU and xLSTM in the short-history setting. Reliability calibration is most informative for drive motor current, where predicted and observed exceedance probabilities ...

cs.AI↗

A Physics-Informed Learning Framework for Linking Microscopic Surface Degradation to Bolted Joint Functional Behavior

Returned products in circular engineering often have heterogeneous degradation histories, making remaining function difficult to assess. For bolted joints, corrosion alters surface morphology, contact, friction, preload retention, and mechanical response. This paper presents a physics-informed multimodal framework for linking microscopic and camera-based degradation observations to functional indicators of corroded bolted joints. The workflow defines the corrosion failure mode, generates synchronized inspection and functional-response records, preprocesses image, roughness, exposure, and joint descriptors, aligns microscopy and camera observations through similarity learning, and constructs a calibrated corrosion-severity field. Partial differential equation (PDE) discovery is applied to this field to identify candidate effective mesoscale laws rather than complete electrochemical mechanisms. The corrosion-evolution model is coupled to a separate functional model, with friction coefficient as the primary target and preload loss included when clamp-force data are available. The contribution is a reproducible pathway for physically constrained assessment of degraded bolted-joint behavior.

cs.AI↗

PreForceVision: Physics-Guided Optical Estimation of Bolt Preload from Bolt-Head Deformation

Bolt preload is a decisive functional quantity in bolted joints because it determines whether external loads are transmitted primarily through frictional clamping or directly through the bolt. Existing preload measurement techniques, including strain-gauge bolts, force washers, ultrasonic methods, and bolt-length measurements, are effective in certain applications but require additional hardware, coupling, calibration, or joint modifications. This limits their scalability for large numbers of standard fasteners and motivates a non-contact optical approach. This paper proposes PreForceVision, a physics-guided optical framework for estimating bolt preload from preload-induced surface deformation of the bolt-head front face. The method treats preload estimation as an inverse deformation-to-force problem, where deformation of the optically accessible bolt-head surface is extracted from reference-loaded image pairs and related to the internal preload state. Preliminary results for an M16 strength class 8.8 bolt show an approximately \SI{12}{\micro\meter} simulated head-face depression at \SI{90}{\kilo\newton}, strain-gauge measurements of comparable magnitude, and an optical 3D measured central depression of approximately \SIrange{10}{20}{\micro\meter}. The contribution is a physics-guided optical methodology combining controlled image-pair acquisition, DIC- or optical-flow-based deformation extraction, multimodal validation, and uncertainty-aware regression for rough preload estimation under controlled conditions.

cs.AI↗

Closed-Form Gaussian Mixture Representations of d-Dimensional Triangulated Domains

We derive a Gaussian Mixture (GM) representation of a full-dimensional subset of Euclidean space with finite volume from a finite simplicial triangulation in closed form. On each simplex, we replace the uniform probability density function (PDF) with a Gaussian PDF that minimizes the Kullback--Leibler (KL) divergence, arriving at the information projection onto the family of Gaussian PDFs. By exploiting affine isomorphisms between simplices, the joint convexity and bijection invariance properties of the KL divergence, identities for Dirichlet PDFs, and a partition-of-unity argument, we establish a dimension-dependent but geometry-independent sharp upper bound on the global KL divergence between the resulting GM PDF and the uniform PDF on the original domain. Numerical examples illustrate the construction and demonstrate its potential in practical applications.

cs.IT↗

Unified Embodiment Description for functional evaluation of used components in circular manufacturing systems

Circular manufacturing systems require functional evaluation of used components based on their physical state. Existing approaches describe this state from separate perspectives, such as design, manufacturing, and degradation, resulting in fragmented and incompatible representations. As a consequence, the physical state cannot be reliably linked to the functional behavior of the corresponding subsystem, which is a prerequisite for informed R-strategy decisions. This paper introduces the Unified Embodiment Description (UED), a state-dependent representation of mechanical components structured into two coupled layers. The first layer is a unified characteristic space, which adapts and extends as new lifecycle effects emerge. The second layer consists of functionally derived tolerance regions that link these embodiment characteristics to the functional behavior of the surrounding subsystem. A supporting UED method guides the model-building process of both layers. The UED is demonstrated in a case study on the spindle shaft of an angle grinder, in which manufacturing variations and degradation patterns such as polishing wear and scratches are quantified. These embodiment changes are embedded into the unified characteristic space and translated into functionally derived tolerance regions through experimental testing of the spindle-bearing subsystem. The results show that embodiment changes induced over the lifecycle can be consistently integrated within the unified characteristic space and that the relations between embodiment and functional behavior can be quantified to support end of life decisions. Overall, the UED provides a foundation for embodiment modeling that adapts to component state and enables decision-making based on functional evaluation for used components in circular manufacturing systems.

eess.SY↗

Anomaly Detection for Electro-Hydrostatic Actuators using LSTM Autoencoder

Electro-Hydrostatic Actuators (EHAs) are widely used in aerospace and industrial systems, where timely detection of sensor anomalies is essential to ensure safe and reliable operation. However, the large volume and high sampling frequency of EHA sensor data pose challenges for accurate and efficient anomaly detection. Conventional statistical and classical machine-learning methods such as Z-score, Interquartile Range (IQR), Median Absolute Deviation (MAD), Isolation Forest, Gaussian Mixture, and k-means often fail to capture the temporal dependencies inherent in EHA signals, resulting in limited detection accuracy and elevated false-alarm rates. Furthermore, systematic evaluations of data-driven anomaly detection approaches for EHA systems remain scarce, particularly under varying operational conditions. This study presents an offline anomaly-detection framework for univariate EHA sensor signals, focusing on temperature and pressure data collected from a controlled test bench. The method employs a reconstruction-based Long Short-Term Memory (LSTM) autoencoder, calibrated and evaluated using validation-set reconstruction-error distributions. Performance is assessed across multiple fault-injection scenarios using accuracy, precision, recall, and F1-score, complemented by sensitivity analyses under varying operating conditions. The LSTM autoencoder achieved an average accuracy of 99.0\%, precision up to 100\%, recall between 90.2\% and 99.6\%, and F1-scores from 93.1\% to 99.8\%, demonstrating high detection sensitivity and a very low false-alarm rate across all evaluated sensors. These results highlight the feasibility of data-driven offline anomaly detection for EHAs. Future work will focus on adapting the developed framework for an online (real-time) environment.

cs.LG↗

Data-Driven Methods and AI in Engineering Design: A Systematic Literature Review Focusing on Challenges and Opportunities

The increasing availability of data and advancements in computational intelligence have accelerated the adoption of data-driven methods (DDMs) in product development. However, their integration into product development remains fragmented. This fragmentation stems from uncertainty, particularly the lack of clarity on what types of DDMs to use and when to employ them across the product development lifecycle. To address this, a necessary first step is to investigate the usage of DDM in engineering design by identifying which methods are being used, at which development stages, and for what application. This paper presents a PRISMA systematic literature review. The V-model as a product development framework was adopted and simplified into four stages: system design, system implementation, system integration, and validation. A structured search across Scopus, Web of Science, and IEEE Xplore (2014--2024) retrieved 1{,}689 records. After screening, 114 publications underwent full-text analysis. Findings show that machine learning (ML) and statistical methods dominate current practice, whereas deep learning (DL), though still less common, exhibits a clear upward trend in adoption. Additionally, supervised learning, clustering, regression analysis, and surrogate modeling are prevalent in design, implementation, and integration system stages but contributions to validation remain limited. Key challenges in existing applications include limited model interpretability, poor cross-stage traceability, and insufficient validation under real-world conditions. Additionally, it highlights key limitations and opportunities such as the need for interpretable hybrid models. This review is a first step toward design-stage guidelines; a follow-up synthesis should map computer science algorithms to engineering design problems and activities.

cs.SE↗

Towards Precision in Bolted Joint Design: A Preliminary Machine Learning-Based Parameter Prediction

Bolted joints are critical in engineering for maintaining structural integrity and reliability. Accurate prediction of parameters influencing their function and behavior is essential for optimal performance. Traditional methods often fail to capture the non-linear behavior of bolted joints or require significant computational resources, limiting accuracy and efficiency. This study addresses these limitations by combining empirical data with a feed-forward neural network to predict load capacity and friction coefficients. Leveraging experimental data and systematic preprocessing, the model effectively captures nonlinear relationships, including rescaling output variables to address scale discrepancies, achieving 95.24% predictive accuracy. While limited dataset size and diversity restrict generalizability, the findings demonstrate the potential of neural networks as a reliable, efficient alternative for bolted joint design. Future work will focus on expanding datasets and exploring hybrid modeling techniques to enhance applicability.

cs.LG↗